PI3HDMI511AZLE - PERICOM SEMICONDUCTOR

ActiveEyeTM HDMI1.4 RedriverTM Source-side Application

Pericom Semiconductor Corporaon 1‐800‐434‐2336 hp:\\www.pericom.com

PI3HDMI511

Features

 HDMI1.4 compliant re-driver

 Operation up to 3.4Gbps per lane (340MHz pixel

clock) for 4K x 2K 24Hz(297MHz) and 3D Video for-

mats(1080p, 1080i, 720p)

 48-bit per pixel Deep Color TM

 Convert low-swing DC and AC coupled dierential

inputs including Dual Mode DisplayPort AC coupled

signals

 Open-drain current steering Rx terminated dierential

output

 Support Output Squelch function for the power-down

mode

 Idle clock detection function for output squelch and

auto standby features

 Provide Output squelch function to turn o TMDS

common mode output when the clock is not present

 Built-in Rx sense detection function and Passive DDC

level shier

 Programmable equalizer, Pre-emphasis and amplitude

settings to achieve optimized HDMI signal integrity

 Support 3.3V source to 5V sink-side system

 Integrated ESD protection on I/O pins for 8kV HBM

and contact per IEC61000-4-2, level 4

 3.3V Power supply

 32-pin TQFN (ZL), Pb-free & Green

Description

PI3HDMI511 is TMDS ReDriver (Repeater) supporting

HDMI 1.4 and legacy DVI 1.0 specications up to the

3.4Gbps data rate with 48-bit per pixel Deep Color TM.

It converts the DC and AC coupled source devices into the

HDMI compliant signal with proper signal swing, especial-

ly in the Notebook HDMI and Dual mode DisplayPort PC

chipset and docking products.

Programmable termination settings at TMDS input helps

to avoid the compatibility issue caused by non -standard

HDMI source to determine the connection status of TMDS

channel with proper termination voltage setting.

PI3HDMI511 also supports low power mode when no val-

id signal presents on the TMDS link with the clock detec-

tion and Receiver sensing features. e double termina-

tion HDMI output can drive long cable connections.

Applications

 Notebook computers

 PC docking station

 Set-Top Box (STB)

 A/V Home entertainment systems

 Dongle, switch boxes

 Long HDMI cables

Fig. 1. PI3HDMI511 Functional Block Diagram

Fig. 2. 1920x1080p 48bit Deep Color with 48” Input

Trace, 9dB Equalization, 500mV Swing, 2.5dB Pre-

emphasis

Pericom Semiconductor Corporaon 1‐800‐434‐2336 hp:\\www.pericom.com

PI3HDMI511

ActiveEyeTM HDMI1.4 ReDriverTM Source-side Application

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH PERICOM PRODUCT. NO

LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY

RIGHTS IS GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN PERICOM’S TERMS AND CON-

DITIONS OF SALE FOR SUCH PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FIT-

NESS FOR A PARTICULA R PURPOSE , M ERCHA NT ABILITY, OR INFRINGEM E NT OF AN Y PATE NT,

Pericom may make changes to specifications and product descriptions at any time, without notice. Designers must

not rely on the absence or characteristics of any features or instru ctions marked “reserved” or “undefined”. Pericom

reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities aris-

ing from future changes to them. The products described in this document may contain design defects or errors known

as errata which may cause the product to deviate from published specification. Current characterized errata are availa-

ble on request.

Contact your local Pericom Sales office or your distributor to obtain the latest specifications and before placing your

product order.

Corporation in the U.S. and other countries.

Ordering Information

Notes:

1. Thermal characteriscs can be found on the company web site at www.pericom.com/packaging/

2. “E” = Pb‐free and Green, Adding an “X” suﬃx = Tape/Reel