1N5913BP
THRU
1N5956BP
1.5 Watt
Zener Diode
3.3to200 Volts
DO-41
Features
• Glass Passivated Junction
• Low Profile Package
• Low Inductance
• Built-in Strain Relief
A
B
C
D
Cathode
M
a
rk
MIN MAX MIN MAX
A 0.160 0.205 4.10 5.20
B 0.080 0.107 2.00 2.70 Diameter
C 0.028 0.034 0.71 0.86 Diameter
D 1.000 ----- 25.40 -----
DIMENSIONS
DIM
INCHES MM
NOTE
Maximum Ratings & Thermal Characteristics
Ratings at 25°C ambient temperature unless otherwise specified.
Parameter Symbol Value Unit
Power
Dissipation at
TL= 75° C
Ptot 1.5(2)W
Pwak forward
Surge Current
8.3ms single half
sine/square wave
IFSM 10 Amps
Junction
Temperature Tj -55 ~ +175 oC
Storage
Temperature
Range
TSTG -55 ~ +175 oC
Forward Voltage
at IF=200mA 1.5VFV
omponents
20736 Marilla Street Chatsworth
!"#
$% !"#
MCC
Revision: B 2012/02/13
TM
Micro Commercial Components
• Marking : 1N5913B~1N5956B type number and Cathode Band
www.mccsemi.com
1 of 5
Note1: High Temperature Solder Exemption Applied, see EU Directive Annex 7.
D
• Lead Free Finish/RoHS Compliant (Note1)("P"Suffix designates
Compliant. See ordering information)
2.0.375" lead length from body.
• Epoxy meets UL 94 V-0 flammability rating
• Moisture Sensitivity Level 1
ELECTRICAL CHARACTERISTICS @25°C
1N5913BP THRU 1N5956BP
MCC
*TOLERANCEANDVOLTAGEDESIGNATIONTolerancedesignation-Thetypenumberslistedindicatea
Revision: B 2012/02/13
TM
Micro Commercial Components
www.mccsemi.com
2 of 5
toleranceof+/-5%
ZENER
VOLTAGE
VZ
TEST
CURRENT
IZT
MAXIMUM
DYNAMIC
IMPEDANCE
ZZT @IZT
KNEE
CURRENT
IZK
KNEE
IMPEDANCE
ZZK
MAXIMUM
REVERSE
CURRENT
IR
REVERSE
VOLTAGE
VR
VOLTS mA OHMS mA OHMS A VOLTS
1N5913BP 3.3 113.6 10 1 500 100 1
1N5914BP 3.6 104.2 9 1 500 75 1
1N5915BP 3.9 96.1 7.5 1 500 25 1
1N5916BP 4.3 87.2 6 1 500 5 1
1N5917BP 4.7 79.8 5 1 500 5 1.5
1N5918BP 5.1 73.5 4 1 350 5 2
1N5919BP 5.6 66.9 2 1 250 5 3
1N5920BP 6.2 60.5 2 1 200 5 4
1N5921BP 6.8 55.1 2.5 1 200 5 5.2
1N5922BP 7.5 50 3 0.5 400 5 6
1N5923BP 8.2 45.7 3.5 0.5 400 5 6.5
1N5924BP 9.1 41.2 4 0.5 500 5 7
1N5925BP 10 37.5 4.5 0.25 500 5 8
1N5926BP 11 34.1 5.5 0.25 550 1 8.4
1N5927BP 12 31.2 6.5 0.25 550 1 9.1
1N5928BP 13 28.8 7 0.25 550 1 9.9
1N5929BP 15 25 9 0.25 600 1 11.4
1N5930BP 16 23.4 10 0.25 600 1 12.2
1N5931BP 18 20.8 12 0.25 650 1 13.7
1N5932BP 20 18.7 14 0.25 650 1 15.2
1N5933BP 22 17 17.5 0.25 650 1 16.7
1N5934BP 24 15.6 19 0.25 700 1 18.2
1N5935BP 27 13.9 23 0.25 700 1 20.6
1N5936BP 30 12.5 28 0.25 750 1 22.8
1N5937BP 33 11.4 33 0.25 800 1 25.1
1N5938BP 36 10.4 38 0.25 850 1 27.4
1N5939BP 39 9.6 45 0.25 900 1 29.7
1N5940BP 43 8.7 53 0.25 950 1 32.7
1N5941BP 47 8 67 0.25 1000 1 35.8
1N5942BP 51 7.3 70 0.25 1100 1 38.8
1N5943BP 56 6.7 86 0.25 1300 1 42.6
1N5944BP 62 6 100 0.25 1500 1 47.1
1N5945BP 68 5.5 120 0.25 1700 1 51.7
1N5946BP 75 5 140 0.25 2000 1 56
1N5947BP 82 4.6 160 0.25 2500 1 62.2
1N5948BP 91 4.1 200 0.25 3000 1 69.2
1N5949BP 100 3.7 250 0.25 3100 1 76
1N5950BP 110 3.4 300 0.25 4000 1 83.6
1N5951BP 120 3.1 380 0.25 4500 1 91.2
1N5952BP 130 2.9 450 0.25 5000 1 98.8
1N5953BP 150 2.5 600 0.25 6000 1 114
1N5954BP 160 2.3 700 0.25 6500 1 121.6
1N5955BP 180 2.1 900 0.25 7000 1 136.8
1N5956BP 200 1.9 1200 0.25 8000 1 152
MCC
PART
NUMBER
1N5913BP THRU 1N5956BP MCC
Revision: B 2012/02/13
TM
Micro Commercial Components
www.mccsemi.com
3 of 5
Characteristics (Tj=25℃ unless otherwise specified)
Symbol Parameter
Vz Reverse zener voltage @ IZT
IZT Reverse current
ZZT Maximum zener impedance @ IZT
IZK Reverse current
ZZK Maximum zener impedance @ IZK
IR Reverse leakage current @ VR
VR Breakdown voltage
IF Forward current
VF Forward voltage @ IF
Figure 1. Zener voltage regulat or
Figure 2. Steady state power derating
Figure 3. Vz – 3.3 thru 10 volts
Figure 4. Zener voltage – 3.3 to 12 volts Figure 5. Zener voltage – 14 to 43 volts
1N5913BP THRU 1N5956BP MCC
Revision: B 2012/02/13
TM
Micro Commercial Components
www.mccsemi.com
4 of 5
Figure 6. Effect of zener voltage
Figure 7. Capacitance curve
Figure 8. Typical pulse rating curve Figure 9. Pulse waveform
Figure 10. Pulse waveform
MCC
Revision: B 2012/02/13
TM
Micro Commercial Components
www.mccsemi.com
5 of 5
Device Packing
Part Number-TP Tape&Reel: 5Kpcs/Reel
Part Number-AP Ammo Packing: 5Kpcs/Ammo Box
Part Number-BP Bulk: 50Kpcs/Carton
Ordering Information :
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
