Emboss Tape KRD CONNECTOR 2.0mm pitch/Disconnectable Insulation displacement connectors Specifications ------------------- This 2.0mm pitch insulation displacement connector is another version of the NRD connector for printed circuit boards. The KRD connector allows daisy chaining and is very useful in simplifying connection systems in electronic equipment. * Daisy chain connection * Twin slot insulation displacement section * Distortion resistant construction * Interchangeability * Low profile design - a mere 9.0mm high from the PC board surface * Current rating: 1.0A AC, DC (AWG #26) * Voltage rating: 100V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/10m max. After environmental testing/20m max. * Insulation resistance: 1,000M min. * Withstanding voltage: 800V AC/minute * Applicable wire: UL1571, UL1061 (Contact JST for details regarding other UL styles.) AWG #28, #26 Conductor/7 strands, tin-coated Insulation O.D./0.9 to 1.0mm * Applicable PC board thickness: 0.8 to 1.6mm * Compliant with RoHS. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. Standards ---------------------- 0 Recognized E60389 1 Certified LR20812 Through-hole type PC board layout (viewed from soldering side) and Assembly layout 4.9 Top entry type Side entry type 2.0 0.05 10.6 2.0 0.05 3.4 0.7 0.1 0 4.9 0.7 0.1 0 4.8 9.0 7.6 6.25 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. Hole dimensions differ according to the kind of PC boards and piercing method. If PC boards made of hard material are used, the hole dimensions should be larger. The dimensions above should serve as a guideline. Contact JST for details. SMT type PC board layout (viewed from component side) and Assembly layout <SM4 type> Top entry type 1.6 0.1 Side entry type 5.0 2.0 0.05 1.5 0.1 1.6 0.1 End face of wafer on the mating side 10.6 5.5max 2.0 Note: 1. Tolerances are non-cumulative: 0.05mm for all centers. 2. The dimensions above should serve as a guideline. Contact JST for details. 1.0 min 5.5 7.6 3.4 0.1 9.6 6.6 7.5 min 2.0max 3.0 0.1 0.2 1.0 End face of wafer on the mating side 1.0 min 1 2.0 0.05 9.0 min 1.6 0.1 1.0 KRD CONNECTOR Socket Circuits 2 3 7.25 4 JST 5 6 7 8 2.0 2.0 A B 3.5 4.9 9 10 11 12 13 14 15 16 Model No. AWG #28(green) AWG #26(natural/white) 02KR-D6S-P 02KR-D8M-P 03KR-D6S-P 03KR-D8M-P 04KR-D6S-P 04KR-D8M-P 05KR-D6S-P 05KR-D8M-P 06KR-D6S-P 06KR-D8M-P 07KR-D6S-P 07KR-D8M-P 08KR-D6S-P 08KR-D8M-P 09KR-D6S-P 09KR-D8M-P 10KR-D6S-P 10KR-D8M-P 11KR-D6S-P 11KR-D8M-P 12KR-D6S-P 12KR-D8M-P 13KR-D6S-P 13KR-D8M-P 14KR-D6S-P 14KR-D8M-P 15KR-D6S-P 15KR-D8M-P 16KR-D6S-P 16KR-D8M-P Dimensions (mm) A B Q'ty / box 2.0 6.0 2,000 4.0 8.0 2,000 6.0 10.0 2,000 8.0 12.0 1,000 10.0 14.0 1,000 12.0 16.0 1,000 14.0 18.0 1,000 16.0 20.0 500 18.0 22.0 500 20.0 24.0 500 22.0 26.0 500 24.0 28.0 500 26.0 30.0 500 28.0 32.0 500 30.0 34.0 500 Material and Finish Contact: Phosphor bronze, tin-plated (reflow treatment) Housing: PA 66, UL94V-0 RoHS compliance <For reference> As the color identification, the following alphabet shall be put in the underlined part. For availability, delivery and minimum order quantity, contact JST. ex. 02KR-D6S-P AWG#26: S...natural (white) AWG#28: M...green Shrouded header The shrouded headers are interchangeable with the PH crimp style connectors and with CR and KR insulation displacement connectors. 2