1N1...A, 1N36..A Series www.vishay.com Vishay Semiconductors Medium Power Silicon Rectifier Diodes, 12 A FEATURES * Voltage ratings from 50 V to 1000 V * High surge capability * Low thermal impedance * High temperature rating * Can be supplied as JAN and JAN-TX devices in accordance with MIL-S-19500/260 * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 DO-203AA (DO-4) PRODUCT SUMMARY IF(AV) 12 A MAJOR RATINGS AND CHARACTERISTICS PARAMETER TEST CONDITIONS IF(AV) TC 50 Hz 60 Hz 50 Hz 60 Hz IFSM I2t TC VRRM Range VALUES 12 150 230 240 260 240 - 65 to 200 50 to 1000 UNITS A C A A2s C V Note * JEDEC registered values are in bold ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VRRM, MAXIMUM REPETITIVE PEAK REVERSE VOLTAGE (TC = - 65 C TO 200 C) V VR(RMS), MAXIMUM RMS REVERSE VOLTAGE (TC = - 65 C TO 200 C) V VRSM, MAXIMUM NON-REPETITIVE PEAK REVERSE VOLTAGE (TC = - 65 C TO 200 C) V 1N1199A 50 35 100 1N1200A 100 70 200 1N1201A 150 105 300 1N1202A 200 140 350 1N1203A 300 210 450 1N1204A 400 280 600 1N1205A 500 350 700 1N1206A 600 420 800 1N3670A 700 490 900 1N3671A 800 560 1000 1N3672A 900 630 1100 1N3673A 1000 700 1200 Notes * JEDEC registered values are in bold * Basic part number indicates cathode to case; for anode to case, add "R" to part number, e.g., 1N1199RA Revision: 08-Apr-13 VRM, MAXIMUM DIRECT REVERSE VOLTAGE (TC = - 65 C TO 200 C) V 50 100 150 200 300 400 500 600 700 800 900 1000 Document Number: 93493 1 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1N1...A, 1N36..A Series www.vishay.com Vishay Semiconductors FORWARD CONDUCTION PARAMETER SYMBOL Maximum average forward current at case temperature IF(AV) TEST CONDITIONS IFSM Half cycle 60 Hz sine wave or 5 ms rectangular pulse Half cycle 50 Hz sine wave or 6 ms rectangular pulse Half cycle 60 Hz sine wave or 5 ms rectangular pulse t = 10 ms Maximum I2t for fusing I2t for individual Maximum device fusing I2t Maximum for individual device fusing Maximum forward voltage drop Maximum average reverse current t = 8.3 ms t = 10 ms I2t t = 8.3 ms I2t (1) VFM UNITS 12 A 150 C 180 sinusoidal conduction Half cycle 50 Hz sine wave or 6 ms rectangular pulse Maximum peak one cycle non-repetitive surge current VALUES Following any rated load condition and with rated VRRM applied 230 Following any rated load condition and with VRRM applied following surge = 0 V 275 240 A 285 With rated VRRM applied following surge, initial TJ = 200 C 260 With VRRM = 0 V following surge, initial TJ = 200 C 370 240 340 t = 0.1 ms to 10 ms, VRRM = 0 V following surge 3715 A2s IF(AV) = 12 A (38 A peak), TC = 25 C 1.35 V VRRM = 50 V 3.0 VRRM = 100 V 2.5 VRRM = 150 V 2.25 VRRM = 200 V 2.0 VRRM = 300 V 1.75 VRRM = 400 V VRRM = 500 V IR(AV) (2) A2s 1.5 Maximum rated IF(AV) and TC mA 1.25 VRRM = 600 V 1.0 VRRM = 700 V 0.9 VRRM = 800 V 0.8 VRRM = 900 V 0.7 VRRM = 1000 V 0.6 Notes * JEDEC registered values are in bold (1) I2t for time t = I2t x t x x (2) Maximum peak reverse current (I RM) under same conditions 2 x rated IR(AV) Revision: 08-Apr-13 Document Number: 93493 2 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1N1...A, 1N36..A Series www.vishay.com Vishay Semiconductors THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum operating case and storage temperature range TEST CONDITIONS TC, TStg VALUES UNITS - 65 to 200 C Maximum internal thermal resistance, junction to case RthJC DC operation 2.0 Thermal resistance, case to sink RthCS Mounting surface, smooth, flat and greased 0.5 C/W minimum 1.36 (12) Torque applied to nut; non-lubricated threads maximum 1.69 (15) minimum Mounting torque 1.07 (9.45) Torque applied to nut; lubricated threads maximum 1.30 (11.55) minimum N*m (lbf * in) 1.17 (10.35) Torque applied to device case; lubricated threads maximum 1.43 (12.65) 7.0 g 0.25 oz. Approximate weight Case style JEDEC DO-203AA (DO-4) Note * JEDEC registered values are in bold Revision: 08-Apr-13 Document Number: 93493 3 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1N1...A, 1N36..A Series www.vishay.com Vishay Semiconductors Fig. 1 - Average Forward Current vs. Maximum Allowable Case Temperature Fig. 2 - Maximum Low Level Forward Power Loss vs. Average Forward Current Fig. 3 - Maximum High Level Forward Power Loss vs. Average Forward Current Fig. 4 - Maximum Forward Voltage vs. Forward Current Fig. 5 - Maximum Transient Thermal Impedance, Junction to Case vs. Pulse Duration Fig. 6 - Maximum Non-Repetitive 50 Hz Surge Current vs. Number of Current Pulses LINKS TO RELATED DOCUMENTS Dimensions Revision: 08-Apr-13 www.vishay.com/doc?95311 Document Number: 93493 4 For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions Vishay Semiconductors DO-203AA (DO-4) DIMENSIONS in millimeters (inches) + 0.3 0 + 0.01 (0.08 0) 0.8 0.1 (0.03 0.004) 3.30 (0.13) 4.00 (0.16) 2 5.50 (0.22) MIN. R 0.40 R (0.02) O 1.80 0.20 (O 0.07 0.01) 20.30 (0.80) MAX. O 6.8 (0.27) 10.20 (0.40) MAX. 3.50 (0.14) 11.50 (0.45) 10.70 (0.42) 10/32" UNF-2A For metric devices: M5 x 0.8 11 (0.43) Document Number: 95311 Revision: 30-Jun-08 For technical questions, contact: indmodules@vishay.com www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000