Bezeichnung :
description :
A mm
B mm
C mm
D mm
E mm
F mm
G mm
Marking = part number
Eigenschaften /
properties Wert / value Einheit / unit tol.
Leerlaufinduktivität/
initial inductance
DC-Widerstand /
DC-resistance
Nennstrom /
rated current
Sättigungsstrom/
saturation current
Eigenres.-Frequenz
self-res.-frequency
33%
Umgebungstemperatur / temperature: +20°C
MnZn Ferrite
When exposed to shock and vibration stress, it is recommended
to fix the device by seperate means (such as glue, fasteners, etc).
ME
09-11-02
Rst
09-07-15
Name Datum / date
Version 1
Version 2
Geprüft / checked
................................................... ..............................................
Änderung / modification
Basismaterial / base material:
F
Werkstoffe & Zulassungen / material & approvals:
Würth Elektronik
..................................................................................
Kunde / customer
Draht / wire: Polyamide/Imid coating
exceed 125°C under worst case operating conditions.
Isat typ.
SRF 10,5 MHz
D
Prüfgeräte / test equipment:
Umgebungstemp. / ambient temperature: -40°C - +75°C
Freigabe erteilt / general release:
± 8%
IN
11,0
∆
∆∆
∆L/L0= 30 %
http://www.we-online.de
Datum / date
..................................................................................
Unterschrift / signature
Kontrolliert / approved
D-74638 Waldenburg · Max-Eyth-Strasse 1 - 3 · Germany · Telefon (+49) (0) 7942 - 945 - 0 · Telefax (+49) (0) 7942 - 945 - 400
Spezifikation für Freigabe / specification for release
A
Testbedingungen /
test conditions
11,0 typ.
± 20%
∆
∆∆
∆T= 50 K
Kunde / customer :
SPEICHERDROSSEL WE-HCI (Ferrit)
POWER-CHOKE WE-HCI (Ferrite)
Artikelnummer / part number :
8,9 ± 0,3
100 kHz / 10mA L0
3,3 ± 0,5
8,0 ref
B
Elektrische Eigenschaften / electrical properties:
74435572200
A
Mechanische Abmessungen / dimensions:
µH
@ 20° C RDC 14,60
22,00
A
WAYNE KERR 3260B für/for L0; RDC; ISAT; IN
mΩ
Luftfeuchtigkeit / humidity:
Arbeitstemperatur / operating temperature: -40°C - +125°C
typ.
G
Eigenschaften / general specifications:
E
Testbedingungen / test conditions:
18,2 ± 0,5
C
Lötpad / soldering spec.:
It is recommended that the temperature of the part does not
18,3 ± 1,0
5,0 ref
9,0 ref
EA
Marking
C
D
B
F
G
[mm]
6,0
6,0
7,3
SEITE 1 VON 4