06/09/2013 V3.0
1
Features:
> High brightness surface mount LED.
> Super wide viewing angle of 160°.
> Equivalent to 0603 package outline. Copper lead-frame construction.
> Qualified according to JEDEC moisture sensitivity Level 2.
> Compatible to IR reflow soldering.
> Environmental friendly; RoHS compliance.
SpiceLEDTM
Like spice, its diminutive size is a stark contrast to its standout performance
in terms of brightness, durability and reliability. Despite being the smallest in
size yet the SpiceLED™ packs a powerful performance and is a highly reliable
design device. Its versality enables its application in automotive applicances,
key-pad illumination, hand-held devices such as PDAs, notebooks, compact
back-lighting applications, consumer appliances, office equipment, audio and
video equipment.
DATA SHEET:
SpiceLEDTM
InGaN White S-Spice : SSW-LLG
© 2005 SpiceLED is a trademark of DOMINANT Opto Technologies.
All rights reserved. Product specications are subject to change without notice.
Applications:
> Automotive: Interior applications, eg: switches, telematics, climate
control system, dashboard, etc
> Signage: full colour display video notice board, signage, special effect
lighting.
DOMINANT
Opto Technologies
Innovating Illumination
TM
Product carrier tape will be changed.
Product Change Notice issued on 01 May 2013.
06/09/2013 V3.0
2
SSW-LLG-T2U-1
SSW-LLG-U2V-1
White
White
160
160
355.00
560.00
InGaN White S-Spice : SSW-LLG
Part Ordering
Number
Color Viewing
Angle˚
Luminous Intensity @ IF = 20mA IV (mcd)
NOTE
1. All part number above comes in a quantity of 3000 units per reel.
2. Other luminious intensity groups are also available upon request
3. Luminous intensity is measured with an accuracy of ± 11%.
4. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel.
Typ. (V)
Vf @ If = 20mA
Forward voltage, Vf is measured with an accuracy of ± 0.1 V.
Max. (V)
Vr @ Ir = 10uA
Min. (V)
Part Number
SSW-LLG 3.2 3.6 5
Min. (V)
2.9
DOMINANT
Opto Technologies
Innovating Illumination
TM
Optical Characteristics at Tj=25˚C
Min. Typ. Max.
500.00
850.00
715.00
1125.00
Unit
Absolute Maximum Ratings
Maximum Value
DC forward current
Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.1)
Reverse voltage; Ir max = 10µA
ESD threshold (HBM)
LED junction temperature
Operating temperature
Storage temperature
Power dissipation (at room temperature)
Thermal resistance
- Junction / ambient, Rth JA
- Junction / solder point, Rth JS
(Mounted on FR4 PCB; pad size >=16mm2 per pad)
30
100
5
2000
110
-40 … +100
-40 … +100
80
215
125
mA
mA
V
V
˚C
˚C
˚C
mW
K/W
K/W
Not for new design
0 38
0.4
0.42
0.44
E3
E4
0.3
0.32
0.34
0.36
0
.
38
A3
A4
A1
C2
C3
C4
C1
E2
E4
E1
0.2
0.22
0.24
0.26
0.28
V2
V3
V4
V1
A2
0.16
0.18
0.24 0.26 0.28 0.3 0.32 0.34 0.36
06/09/2013 V3.0
3
InGaN White S-Spice : SSW-LLG
DOMINANT
Opto Technologies
Innovating Illumination
TM
Bin
V1
V2
V3
V4
A1
A2
A3
A4
C1
C2
C3
C4
0.2525
0.2318
0.2525
0.2143
0.2650
0.2525
0.2650
0.2350
0.2775
0.2732
0.2775
0.2557
0.2900
0.2939
0.2900
0.2764
0.3025
0.3146
0.3025
0.2971
0.3150
0.3354
0.3150
0.3179
Cx
Cy
Cx
Cy
Cx
Cy
Cx
Cy
Cx
Cy
Cx
Cy
Cx
Cy
Cx
Cy
Cx
Cy
Cx
Cy
Cx
Cy
Cx
Cy
0.2650
0.2525
0.2650
0.2350
0.2775
0.2732
0.2775
0.2557
0.2900
0.2939
0.2900
0.2764
0.3025
0.3146
0.3025
0.2971
0.3150
0.3354
0.3150
0.3179
0.3275
0.3561
0.3275
0.3386
0.2650
0.2700
0.2650
0.2525
0.2775
0.2907
0.2775
0.2732
0.2900
0.3114
0.2900
0.2939
0.3025
0.3321
0.3025
0.3146
0.3150
0.3529
0.3150
0.3354
0.3275
0.3736
0.3275
0.3561
0.2525
0.2493
0.2525
0.2318
0.2650
0.2700
0.2650
0.2525
0.2775
0.2907
0.2775
0.2732
0.2900
0.3114
0.2900
0.2939
0.3025
0.3321
0.3025
0.3146
0.3150
0.3529
0.3150
0.3354
Dominant White Bin Structure
Wavelength Grouping
Chromaticity coordinate groups are measured with an accuracy of ± 0.01.
123 4
06/09/2013 V3.0
4
InGaN White S-Spice : SSW-LLG
DOMINANT
Opto Technologies
Innovating Illumination
TM
Bin
E1
E2
E3
E4
0.3275
0.3561
0.3275
0.3386
0.3400
0.3768
0.3400
0.3593
Dominant color coordinate is measured with an accuracy of ± 0.01.
Cx
Cy
Cx
Cy
Cx
Cy
Cx
Cy
0.3400
0.3768
0.3400
0.3593
0.3525
0.3975
0.3525
0.3800
0.3400
0.3943
0.3400
0.3768
0.3525
0.4150
0.3525
0.3975
0.3275
0.3736
0.3275
0.3561
0.3400
0.3943
0.3400
0.3768
123 4
InGaN White S-Spice : SSW-LLG
DOMINANT
Opto Technologies
Innovating Illumination
TM
T2
U1
U2
V1
V2
355.0 ... 450.0
450.0 ... 560.0
560.0 ... 715.0
715.0 ... 900.0
900.0 ... 1125.0
Brightness Group Luminous Intensity
IV (mcd)
Luminous Intensity Group at Tj=25˚C
Luminous intensity is measured with an accuracy of ± 11%.
06/09/2013 V3.0
5
Forward Voltage (V)
Vf Binning (Optional)
Vf Bin @ 20mA
01
02
03
04
05
06
07
2.90 … 3.00
3.00 … 3.10
3.10 … 3.20
3.20 … 3.30
3.30 … 3.40
3.40 … 3.50
3.50 … 3.60
Forward voltage, Vf is measured with an accuracy of ± 0.1 V.
Please consult sales and marketing for special part number to incorporate Vf binning.
06/09/2013 V3.0
6
InGaN White S-Spice : SSW-LLG
Relative Luminous Intensity Vs Forward Current
Forward Current, mA
Relative Intensity; Normalized at 20mA
0 10 20 30 40 50
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
2.2
Forward Current Vs Forward Voltage
Forward Voltage; V
Forward Current; mA
2 2.5 3 3.5 4
0
10
20
30
40
50
Forward Current Vs Ambient Temperature
Ambient Temperature
Forward Current; mA
0 10 20 30 40 50 60 70 80 90 100
0
5
10
15
20
25
30
35
Relative Intensity Vs Wavelength
Wavelength; nm
Relative Intensity
400 450 500 550 600 650 700 750
0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
0
o
10
o
70
o
60
o
50
o
40
o
30
o
20
o
90
o
80
o
0.6
0.8
1.0
0.2
0.4
0
Radiation Pattern
DOMINANT
Opto Technologies
Innovating Illumination
TM
06/09/2013 V3.0
7
InGaN White S-Spice : SSW-LLG
SpiceLEDTM •
InGaN White S-Spice : SSW-LLG
Package Outlines
Note: The center pad is a common cathode. Please take care during soldering to avoid shorting.
Material
Material
Lead-frame
Package
Cu Alloy With NiPdAu Plating
High Temperature Resistant Epoxy Resin
Note: product is Pb free
DOMINANT
Opto Technologies
Innovating Illumination
TM
06/09/2013 V3.0
8
InGaN White S-Spice : SSW-LLG
Recommended Solder Pad
Note: Component is based on a new package platform, which features “Bottom Only Terminations“. Solder joints are only formed
at the bottom of the component and solder fillet will not be observable as the sides of the component.
Surface are not intended for soldering
DOMINANT
Opto Technologies
Innovating Illumination
TM
06/09/2013 V3.0
9
Taping and orientation
• Reels come in quantity of 3000 units.
• Reel diameter is 180 mm.
InGaN White S-Spice : SSW-LLG
DOMINANT
Opto Technologies
Innovating Illumination
TM
06/09/2013 V3.0
10
Packaging Specication
InGaN White S-Spice : SSW-LLG
DOMINANT
Opto Technologies
Innovating Illumination
TM
06/09/2013 V3.0
11
Packaging Specication
Average 1pc SpiceLED 1 completed bag (3000pcs)
0.034 190 ± 10Weight (gram)
Cardboard
Box
Dimensions (mm) Empty Box
Weight (kg)
300 x 250 x 250
416 x 516 x 476
15 reels MAX
96 reels MAX
Small
Large
For SpiceLEDTM
Reel / Box Quantity / Box (pcs)Cardboard Box
Size
0.58
1.74
45,000 MAX
288,000 MAX
Weight (gram) 0.001 140 ± 10
InGaN White S-Spice : SSW-LLG
DOMINANT TM
DOMINANT
Opto Technologies
Innovating Illumination
TM
D/C: date codeS/N : serial no
GROUP : group
QTY : product quantity per reel
PART NO : partno
LOT NO : lotno
Moisture sensitivity level
Moisture absorbent material +
Moisture indicator
The reel, moisture absorbent material and moisture indicator are
sealed inside the moisture proof foil bag
Reel
Barcode label
DOMINANT
ROHS Compliant
PB Free
Label
06/09/2013 V3.0
12
Time (sec)
0 50 100 150 200
300
250
225
200
175
150
125
100
75
50
25
275
Temperature (˚C)
Classication Reow Prole (JEDEC J-STD-020C)
Ramp-up
3˚C/sec max.
255-260˚C
10-30s
60-150s
Ramp-
down
6˚C/sec
max.
Preheat 60-180s
480s max
217˚C
Recommended Pb-free Soldering Prole
InGaN White S-Spice : SSW-LLG
DOMINANT
Opto Technologies
Innovating Illumination
TM
Revision History
NOTE
All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT
Opto Technologies does not assume any liability arising out of the application or use of any product described herein.
DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function
or design.
DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems
without the express written approval from the Managing Director of DOMINANT Opto Technologies.
Page
-
2
2
Subjects
Initial release
Add new partno: SSW-LLG-U2V-1
Not for new design: SSW-LLG-U2V-1
Date of Modication
16 May 2012
04 Oct 2012
06 Sep 2013
InGaN White S-Spice : SSW-LLG
DOMINANT
Opto Technologies
Innovating Illumination
TM
06/09/2013 V3.0
13
About Us
DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED
Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries
and applications. Featuring an internationally certi ed quality assurance acclaim, DOMINANT’s extra bright LEDs
are perfectly suited for various lighting applications in the automotive, consumer and communications as well as
industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art
manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More
information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com.
DOMINANT
Opto Technologies
Innovating Illumination
TM
InGaN White S-Spice : SSW-LLG
Please contact us for more information:
DOMINANT Opto Technologies Sdn. Bhd.
Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia
Tel: (606) 283 3566 Fax: (606) 283 0566
E-mail: sales@dominant-semi.com
DOMINANT
Opto Technologies
Innovating Illumination
TM