© 2007 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 10 E-Mail: sales@glenair.com
CB Series
Connectors
CB Series “PogoPin” Connectors
All dimensions in millimeters (mm). Information subject to change without notice.
Receptacles feature non-removable solder cup contacts or printed circuit
board terminals. Contacts are plated with hard gold. Stainless steel connector
body and jam nut. Shell is plated with black chromate nish. Silicone face seal
prevents water ingress when unmated. Open face pressure rating 0.4 bar. 5000
cycles mating durability.
7 Pin Panel Mount Receptacle7 Pin Receptacle
Connector Mating Face
and Key Positions
Receptacle Connectors for Panel Mounting - 7 Contacts
Mounting
Style Fig.
Contact
Type
Polarizing
Position 1
(Blue)
Polarizing
Position 2
(Yellow)
Polarizing
Position 3
(Green)
Polarizing
Position 4
(Pink)
Jam Nut Fig. 1
Solder Cup
CB07C1L0 CB07C2L0 CB07C3L0 CB07C4L0
Jam Nut Fig. 1
Short PC Tail
CB07C1L1 CB07C2L1 CB07C3L1 CB07C4L1
Jam Nut Fig. 1
Long PC Tail
CB07C1L2 CB07C2L2 CB07C3L2 CB07C4L2
Jam Nut w/ Thd.
Fig. 2
Solder Cup
CB07T1L0 CB07T2L0 CB07T3L0 CB07T4L0
Jam Nut w/ Thd.
Fig. 2
Short PC Tail
CB07T1L1 CB07T2L1 CB07T3L1 CB07T4L1
Jam Nut w/ Thd.
Fig. 2
Long PC Tail
CB07T1L2 CB07T2L2 CB07T3L2 CB07T4L2
Flange Fig. 3
Solder Cup
CB07B1L0 CB07B2L0 CB07B3L0 CB07B4L0
Flange Fig. 3
Short PC Tail
CB07B1L1 CB07B2L1 CB07B3L1 CB07B4L1
Flange Fig. 3
Long PC Tail
CB07B1L2 CB07B2L2 CB07B3L2 CB07B4L2
Thread-In Fig. 4
Solder Cup
CB07Q1L0 CB07Q2L0 CB07Q3L0 CB07Q4L0
Thread-In Fig. 4
Short PC Tail
CB07Q1L1 CB07Q2L1 CB07Q3L1 CB07Q4L1
Thread-In Fig. 4
Long PC Tail
CB07Q1L2 CB07Q2L2 CB07Q3L2 CB07Q4L2
Position A B
Color
Code
1 90° 120° White
2 105° 130° Yellow
3 110° 135° Green
4 100° 165° Pink
Contact Types
Solder cup contacts accept up to
#20 AWG stranded wire (1mm max.
diameter). PC tail contacts are available
in two lengths: 3.5 mm and 8.0 mm
Style 1
1 Jam nut receptacle for rear panel
mounting (3.5 mm maximum panel
thickness). Supplied with stainless
steel jam nut and at washer. Nitrile
O-ring provides watertight panel
seal. 13 grams maximum weight.
2 Jam nut receptacle with M14X1
accessory threads for rear panel
mounting (3.5 mm max. panel
thickness). Supplied with stainless
steel jam nut and at washer. Nitrile
O-ring provides watertight panel
seal. 13 grams maximum weight.
3 Two hole ange mount receptacle
for front panel mounting. Mounting
holes accept M3 screws, not
supplied. Use with optional gasket or
O-ring for watertight panel sealing.
16 grams maximum weight.
4 "Thread-in" receptacle with PG9
threads for installation directly into
a tapped hole. Supplied with O-ring.
16 grams maximum weight.
CB07B1L0
A
C
D
E
F
G
B
AB
C
D
E
FG
A
B
Jam Nut Receptacle
SHORT PC TAIL
Ø 0.53 x 3.5
SOLDER CUP
#20 AWG
8
Style 2
Style 3 Style 4
© 2007 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 11 E-Mail: sales@glenair.com
CB Series
Connectors
CB Series “PogoPin” Connectors
All dimensions in millimeters (mm). Information subject to change without notice.
Contact Types
Solder cup contacts accept up to
#20 AWG stranded wire (1mm max.
diameter). PC tail contacts are available
in two lengths: 3.5 mm and 8.0 mm
Receptacles feature non-removable solder cup contacts for up to #20
AWG wire or printed circuit board terminals. Contacts are plated with hard gold.
Stainless steel connector body and jam nut. Shell is plated with black chromate
nish. Silicone face seal and O-ring. Open face pressure rating 0.4 bar. 5000
cycles mating durability.
10 Pin Panel Mount Receptacle
10 Pin Receptacle
Connector Mating Face
and Key Positions
Receptacle Connectors for Panel Mounting - 10 Contacts
Mounting
Style Fig.
Contact
Type
Polarizing
Position N
(White)
Polarizing
Position W
(Blue)
Polarizing
Position X
(Violet)
Polarizing
Position Y
(Chrome
Yellow)
Polarizing
Position Z
(Dark Red)
Jam Nut Fig. 1 Solder Cup
CB10C1L0 CB10C2L0 CB10C3L0 CB10C4L0 CB10C5L0
Jam Nut Fig. 1 Short PC Tail
CB10C1L1 CB10C2L1 CB10C3L1 CB10C4L1 CB10C5L1
Jam Nut Fig. 1 Long PC Tail
CB10C1L2 CB10C2L2 CB10C3L2 CB10C4L2 CB10C5L2
Jam Nut/ Thd. Fig. 2 Solder Cup
CB10T1L0 CB10T2L0 CB10T3L0 CB10T4L0 CB10T5L0
Jam Nut / Thd. Fig. 2 Short PC Tail
CB10T1L1 CB10T2L1 CB10T3L1 CB10T4L1 CB10T5L1
Jam Nut / Thd. Fig. 2 Long PC Tail
CB10T1L2 CB10T2L2 CB10T3L2 CB10T4L2 CB10T5L2
Flange Fig. 3 Solder Cup
CB10B1L0 CB10B2L0 CB10B3L0 CB10B4L0 CB10B5L0
Flange Fig. 3 Short PC Tail
CB10B1L1 CB10B2L1 CB10B3L1 CB10B4L1 CB10B5L1
Flange Fig. 3 Long PC Tail
CB10B1L2 CB10B2L2 CB10B3L2 CB10B4L2 CB10B5L2
Thread-In Fig. 4 Solder Cup
CB10Q1L0 CB10Q2L0 CB10Q3L0 CB10Q4L0 CB10Q5L0
Thread-In Fig. 4 Short PC Tail
CB10Q1L1 CB10Q2L1 CB10Q3L1 CB10Q4L1 CB10Q5L1
Thread-In Fig. 4 Long PC Tail
CB10Q1L2 CB10Q2L2 CB10Q3L2 CB10Q4L2 CB10Q5L2
1 Jam nut receptacle for rear panel
mounting (3.0 mm maximum panel
thickness). Supplied with stainless
steel jam nut and at washer. O-ring
provides watertight panel seal. 11
grams maximum weight.
2 Jam nut receptacle with M14X1
accessory threads for rear panel
mounting (3.5 mm max. panel
thickness). Supplied with stainless
steel jam nut and at washer. O-ring
provides watertight panel seal. 19
grams maximum weight.
3 Two hole ange mount receptacle for
front panel mounting. Mounting holes
accept M3 screws, not supplied. Use
with optional gasket or O-ring for
watertight panel sealing. 19 grams
maximum weight.
4 "Thread-in" receptacle with PG9
threads for installation directly into
a tapped hole. Supplied with O-ring.
19 grams maximum weight.
CB07B1L0
A
C
D
E
F
G
B
Position A B Color Code
N 95° 140° White
W 85° 115° Blue
X 100° 105° Violet
Y 110° 120° Chrome Yellow
Z 80° 145° Dark Red
A
B
C
D
E
F
G
H
K
J
A
B
30°
SHORT PC TAIL
Ø 0.53 x 3.5
SOLDER CUP
#20 AWG
8
Style 1 Style 2
Style 3 Style 4
Jam Nut Receptacle
© 2007 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 12 E-Mail: sales@glenair.com
CB Series
Connectors
CB Series “PogoPin” Connectors
All dimensions in millimeters (mm). Information subject to change without notice.
Detail A
Contact Termination Styles
16.2 MAX
22.7 MAX
3.0 MAX
3.0 MAX
PANEL
JAM NUT
WASHER
M14 x 0.75
O-RING
DETAIL
A
M14 X 1
THD
16.2 MAX
20.6 MAX
3.0 MAX
3.0 MAX
PANEL
JAM NUT
WASHER
M14 x 0.75
O-RING
DETAIL
A
Jam Nut Receptacle Dimensions
Flange Mount Receptacle Dimensions
Thread-In Mount Receptacle Dimensions
A
C
D
E
F
G
B
17.0
Ø 18.0
MAX.
LOCATION OF
POLARIZING
COLOR CODE
14.2 MAX.
21.9 MAX.
Ø 13.5 MAX.
4.0
2.0
DETAIL
A
PG 9 THREAD
I.A.W. DIN 40430
CB07B1L0
A
C
D
E
F
G
B
Ø 3.7/3.3 THRU
HOLE 2 PLCS
RAD 3.5
25.0 ± 0.1
32.0 MAX.
LOCATION OF
POLARIZING
COLOR CODE
Ø 18.0
20.5 MAX.
Ø 13.5
MAX.
1.5 ± 0.15
13
MAX.
DETAIL
A
Ø 12.8
MAX.
SHORT PC TAIL
LONG PC TAIL
SOLDER CUP
#20 AWG
2.5 1.14 MAX.
1.0 MAX.
3.5
2.9/3.0
8
0.45/0.53
0.45/0.50
AB
C
D
E
FG
Ø 17.0 MAX
LOCATION OF
POLARIZING
COLOR CODE
2.0
12.8 (+0 / -0.1)
FLATS
© 2007 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com 13 E-Mail: sales@glenair.com
CB Series
Connectors
CB Series “PogoPin” Connectors
All dimensions in millimeters (mm). Information subject to change without notice.
Receptacle Connector Panel Cutouts
Receptacle Connector Printed Circuit Board Patterns
14.2 +0.1/-0
12.9 +0.1/-0
MAXIMUM PANEL
THICKNESS 3.0
3.5 + 0.15/-0
25
± 0.15 12.4
+ 0.2/-0
M3 TAPPED
THREAD
25 ± 0.15 12.4 + 0.2/-0
A
B
C
D
E
FG
C
L
C
L
31.5
2.6
1.5
2.6
3
A
B
C
D
E
F
G
KH
J
C
L
C
L
3.8 0.45
3.2
2.9
1.1
1.65
2.45
1.55 1.55
2.45
3.65
2.05 2.05
3.65
1 Panel cutout for jam nut receptacle
for rear panel mounting.
4a
Face view of panel cutout for
elliptical fl ange receptacle with
tapped holes. 4a
Side view of panel cutout for
elliptical fl ange receptacle with
tapped holes. 5 O-ring for use with cutout #4.
Purchased separately.
1 PCB mounting pattern for
receptacles with 7 contacts. 2 PCB mounting pattern for
receptacles with 10 contacts.
2 Panel cutout for elliptical fl ange
mount receptacle. For front panel
mounting. 3 Nitrile panel gasket for elliptical
fl ange mount receptacle. Ordered
separately.
Description Part Number
Gasket CBGK-B
Description Part Number
O-Ring CBOR-B
Ø 3.1
32.0 MAX.
Ø 18.0
MAX.
1.4 ± 0.1
25.0 ± 0.15
15.8 + 0.2/-0
0-RING
(SOLD SEPARATELY)