Test & Measurement -- Tunable Bandpass Filters -- BT Series Features: * Manual Frequency Selection * Direct-readout Center Frequency Dial * 5 Section, Chebyshev Filter Response * Digitally Controlled Versions Available * AVAILABLE FROM STOCK K&L Model Frequency Range (MHz) Passband Insertion Loss Lenth Inch/mm Width Inch/mm Heigh Inch/mm 5BT-1.5/3.0-5-N/N 1.5-3.0 3.0 dB max 22.00/559 9.32/237 4.19/106 5BT-3/6-5-N/N 3-6 2.5 dB max 22.00/559 9.32/237 4.19/106 5BT-6/12-5-N/N 6-12 2.5 dB max 22.00/559 9.32/237 4.19/106 5BT-12/24-5-N/N 12-24 2.5 dB max 14.70/373 7.00/178 4.00/102 5BT-15/30-5-N/N 15-30 2.5 dB max 14.70/373 7.00/178 4.00/102 5BT-24/48-5-N/N 5BT-30/76-5-N/N* 5BT-48/95-5-N/N 5BT-63/125-5-N/N* 5BT-95/190-5-N/N 5BT-125/250-5-N/N* 5BT-190/375-5-N/N 5BT-250/500-5-N/N* 5BT-375/750-5-N/N* 5BT-500/1000-5-N/N* 5BT-750/1500-5-N/N* 5BT-1000/2000-5-N/N* 5BT-1200/2600-5-N/N* 5BT-1500/3000-5-N/N 24-48 30-76 48-95 63-125 95-190 125-250 190-375 250-500 375-750 500-1000 750-1500 1000-2000 1200-2600 1500-3000 1.3 dB max 1.3 dB max. 1.3 dB max. 1.3 dB max. 1.3 dB max. 1.3 dB max. 1.3 dB max. 1.0 dB max. 1.0 dB max. 1.0 dB max. 1.0 dB max. 1.0 dB max. 1.0 dB max. 1.0 dB max. 9.80/249 9.80/249 9.80/249 9.80/249 9.80/249 9.80/249 9.80/249 9.80/249 9.80/249 9.80/249 9.80/249 7.38/187 7.38/187 7.38/187 5.38/137 9.80/249 9.80/249 5.38/137 5.38/137 5.38/137 5.38/137 5.38/137 5.38/137 5.38/137 5.38/137 2.88/73 2.88/73 2.88/73 2.75/70 2.75/70 2.75/70 2.75/70 2.75/70 2.75/70 2.75/70 2.75/70 2.75/70 2.75/70 2.75/70 2.75/70 2.75/70 2.75/70 Dial Accuracy RF Connector Specifications: Type 5 Section Nominal 3 dB BW 5% VSWR Impedance 1.5:1 50 Ohms Shape Factor Power Handling 30 dB to 3 dB/50 dB to 3 db 50 Watts 2.2:1 / 3.5:1 CW +/- 1% Custom configurations and ruggedized versions also available. Contact the factory for custom requirements. Filtering Solutions for Your Global Market USA Phone: 410-749-2424 FAX: 410-749-5725 Email: sales@klmicrowave.com EUROPE Phone: +44-(0)-1908-547920 FAX: +44-(0)-1908-695284 Email: sales@kleurope.com Order On-Line @ www.klmicrowave.com Type N Test & Measurement -- Tunable Bandpass Filters -- BT Series Applications: * ATE Labs * Wireless Communications * CATV Test Verification (75 Ohm Units Available) * Surveillance Additional Features: K & L MIcrowave's BT Series Tunable Bandpass Filters cover the frequency range of 1.5 to 3,000 MHz with each model typically covering a complete octave. These filters are available with 5 sections and a nominal 3 dB bandwidth from 1% to 10%. Standard models are available with a 5% 3 dB bandwidth offering low insertion loss values from 1 dB through 1.3 dB and a VSWR of less than 1.5:1. Each BT Series is constructed in a sturdy aluminum housing. Each section of the tunable filter is iriscoupled yielding a low ripple Chebyshev response. Manual tuning of the BT Series is accomplished by a front panel vernier/dial assembly. Each dial is engraved with the direct-read-out center frequencies which eliminates the need for interpolating frequency calibration charts. Filtering Solutions for Your Global Market USA Phone: 410-749-2424 FAX: 410-749-5725 Email: sales@klmicrowave.com EUROPE Phone: +44-(0)-1908-547920 FAX: +44-(0)-1908-695284 Email: sales@kleurope.com Order On-Line @ www.klmicrowave.com