Test & Measurement — Tunable Bandpass Filters — BT Series
USA EUROPE
Phone: 410-749-2424 Phone: +44-(0)-1908-547920
FAX: 410-749-5725 FAX: +44-(0)-1908-695284
Email: sales@klmicrowave.com Email: sales@kleurope.com
Filtering Solutions for Your Global Market
Order On-Line @ www.klmicrowave.com
Features:
Manual Frequency Selection
Direct-readout Center Frequency Dial
5 Section, Chebyshev Filter Response
Digitally Controlled Versions Available
* AVAILABLE FROM STOCK
K&L Model Frequency Range
(MHz)
Passband Insertion
Loss
Lenth
Inch/mm
Width
Inch/mm
Heigh
Inch/mm
5BT-1.5/3.0-5-N/N 1.5-3.0 3.0 dB max 22.00/559 9.32/237 4.19/106
5BT-3/6-5-N/N 3-6 2.5 dB max 22.00/559 9.32/237 4.19/106
5BT-6/12-5-N/N 6-12 2.5 dB max 22.00/559 9.32/237 4.19/106
5BT-12/24-5-N/N 12-24 2.5 dB max 14.70/373 7.00/178 4.00/102
5BT-15/30-5-N/N 15-30 2.5 dB max 14.70/373 7.00/178 4.00/102
5BT-24/48-5-N/N 24-48 1.3 dB max 9.80/249 5.38/137 2.75/70
5BT-30/76-5-N/N* 30-76 1.3 dB max. 9.80/249 9.80/249 2.75/70
5BT-48/95-5-N/N 48-95 1.3 dB max. 9.80/249 9.80/249 2.75/70
5BT-63/125-5-N/N* 63-125 1.3 dB max. 9.80/249 5.38/137 2.75/70
5BT-95/190-5-N/N 95-190 1.3 dB max. 9.80/249 5.38/137 2.75/70
5BT-125/250-5-N/N* 125-250 1.3 dB max. 9.80/249 5.38/137 2.75/70
5BT-190/375-5-N/N 190-375 1.3 dB max. 9.80/249 5.38/137 2.75/70
5BT-250/500-5-N/N* 250-500 1.0 dB max. 9.80/249 5.38/137 2.75/70
5BT-375/750-5-N/N* 375-750 1.0 dB max. 9.80/249 5.38/137 2.75/70
5BT-500/1000-5-N/N* 500-1000 1.0 dB max. 9.80/249 5.38/137 2.75/70
5BT-750/1500-5-N/N* 750-1500 1.0 dB max. 9.80/249 5.38/137 2.75/70
5BT-1000/2000-5-N/N* 1000-2000 1.0 dB max. 7.38/187 2.88/73 2.75/70
5BT-1200/2600-5-N/N* 1200-2600 1.0 dB max. 7.38/187 2.88/73 2.75/70
5BT-1500/3000-5-N/N 1500-3000 1.0 dB max. 7.38/187 2.88/73 2.75/70
Type Nominal
3 dB BW VSWR Impedance Shape Factor
Power
Handling
Dial
Accuracy
RF
Connector
5
Section 5% 1.5:1 50 Ohms 30 dB to 3 dB/50 dB to 3 db
2.2:1 / 3.5:1
50 Watts
CW
+/- 1% Type N
Custom configurations and ruggedized versions also available. Contact the factory for custom requirements.
Specifications:
Test & Measurement — Tunable Bandpass Filters — BT Series
USA EUROPE
Phone: 410-749-2424 Phone: +44-(0)-1908-547920
FAX: 410-749-5725 FAX: +44-(0)-1908-695284
Email: sales@klmicrowave.com Email: sales@kleurope.com
Filtering Solutions for Your Global Market
Order On-Line @ www.klmicrowave.com
Applications:
ATE Labs
Wireless Communications
CATV Test Verification (75 Ohm Units Available)
Surveillance
K & L MIcrowave’s BT Series Tunable Bandpass Filters cover the frequency range of 1.5 to 3,000 MHz
with each model typically covering a complete octave. These filters are available with 5 sections and a
nominal 3 dB bandwidth from 1% to 10%. Standard models are available with a 5% 3 dB bandwidth
offering low insertion loss values from 1 dB through 1.3 dB and a VSWR of less than 1.5:1.
Each BT Series is constructed in a sturdy aluminum housing. Each section of the tunable filter is iris-
coupled yielding a low ripple Chebyshev response.
Manual tuning of the BT Series is accomplished by a front panel vernier/dial assembly. Each dial is
engraved with the direct-read-out center frequencies which eliminates the need for interpolating frequen-
cy calibration charts.
Additional Features: