SURFACE MOUNT DISPLAY APSC03-41SURKWA-F01 Features HYPER RED Description 0.3 INCH DIGIT HEIGHT. The Hyper Red source color devices are made with DH LOW CURRENT OPERATION. InGaAlP on GaAs substrate Light Emitting Diode. EXCELLENT CHARACTER APPEARANCE. I.C. COMPATIBLE. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 1100PCS / REEL. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is 0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAF2727 REV NO: V.2 DATE: APR/26/2005 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000145-01 Selection Guide Part No. Dice APSC03-41SURKWA-F01 Lens Type HYPER RED (InGaAlP) WHITE DIFFUSED Iv (ucd) @ 10 mA Description Min. Typ. 3000 15257 Common Cathode, Rt. Hand Decimal. Electrical / Optical Characteristics at TA=25C Symbol Parameter Device peak Peak Wavelength Hyper Red D Dominant Wavelength 1/2 Typ. Max. Units Test Conditions 650 nm IF=20mA Hyper Red 635 nm IF=20mA Spectral Line Half-width Hyper Red 28 nm IF=20mA C Capacitance Hyper Red 35 pF VF=0V;f=1MHz VF Forward Voltage Hyper Red 1.95 2.5 V IF=20mA IR Reverse Current Hyper Red 10 uA VR = 5V Absolute Maximum Ratings at TA=25C Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA 5 V Reverse Voltage Operating/Storage Temperature -40C To +85C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAF2727 REV NO: V.2 DATE: APR/26/2005 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000145-01 Hyper Red APSC03-41SURKWA-F01 SPEC NO: DSAF2727 REV NO: V.2 DATE: APR/26/2005 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000145-01 APSC03-41SURKWA-F01 Recommended Soldering Pattern (Units : mm) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAF2727 REV NO: V.2 DATE: APR/26/2005 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP:1351000145-01 PACKING & LABEL SPECIFICATIONS APSC03-41SURKWA-F01 Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. SPEC NO: DSAF2727 REV NO: V.2 D i g i t a l l y s i g n e d b y N I N G T I N G c n = N I N G T I N G , DATE: APR/26/2005 PAGE: 5 OF 5 DRAWN: W.J.ZHU ERP:1351000145-01 o = N I N G T I N G , c = C N D a t e : 2 0 0 5 . 0 4 . 2 6 1 1 : 4 0 : 5 7 + 0 8 '0 0 'R e a s o n : < n o n e > APPROVED: J. Lu CHECKED: Joe Lee