https://www.phoenixcontact.com/us/products/1701013 PCB terminal block - MKDSN 1,5/17 - 1701013 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PCB terminal block, nominal current: 13.5 A, nom. voltage: 400 V, pitch: 5 mm, number of positions: 17, connection method: Screw connection with tension sleeve, mounting: Wave soldering, conductor/PCB connection direction: 0 , color: green The figure shows a 10-position version of the product Your advantages Well-known connection principle allows worldwide use Low temperature rise, thanks to maximum contact force Allows connection of two conductors Extremely small design for the respective conductor cross section The latching on the side enables various numbers of positions to be combined Key Commercial Data Packing unit 1 GTIN GTIN 4046356511070 Custom tariff number 85369010 Technical data Dimensions Length [ l ] 8.1 mm Pitch 5 mm Dimension a 80 mm Width [ w ] 85 mm Height 10 mm Height [ h ] 13.5 mm 05/12/2019 Page 1 / 6 https://www.phoenixcontact.com/us/products/1701013 PCB terminal block - MKDSN 1,5/17 - 1701013 Technical data Dimensions Solder pin [P] 3.5 mm Pin spacing 5 mm Hole diameter 1.3 mm General Range of articles MKDSN 1,5 Rated surge voltage (III/3) 4 kV Rated surge voltage (III/2) 4 kV Rated surge voltage (II/2) 4 kV Rated voltage (III/3) 250 V Rated voltage (III/2) 400 V Rated voltage (II/2) 630 V Connection in acc. with standard EN-VDE Nominal current IN 13.5 A Nominal cross section 1.5 mm Internal cylindrical gage A1 Stripping length 6 mm Number of positions 17 Screw thread M3 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Connection data Conductor cross section AWG min. 26 Conductor cross section AWG max. 16 2 conductors with same cross section, solid min. 0.14 mm 2 conductors with same cross section, solid max. 0.75 mm 2 conductors with same cross section, stranded min. 0.14 mm 2 conductors with same cross section, stranded max. 0.75 mm 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 0.5 mm 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.75 mm sleeve, max. Standards and Regulations Connection in acc. with standard EN-VDE 05/12/2019 Page 2 / 6 https://www.phoenixcontact.com/us/products/1701013 PCB terminal block - MKDSN 1,5/17 - 1701013 Technical data Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings 26 24 22 20 18 16 14 12 10 8 6 4 2 0 Drilling diagram a 2,5 5 " 4,05 I [A] Diagram " = 1,5 mm 0 10 20 2 30 40 50 60 70 90 100 110 80 1,3 ! [C] Type: MKDSN 1,5/... Dimensional drawing a+5 3,5 10 8,1 4,05 2,5 5 a Classifications eCl@ss eCl@ss 4.0 27141111 eCl@ss 4.1 27141109 eCl@ss 5.0 27141190 eCl@ss 5.1 27261100 eCl@ss 6.0 27261100 eCl@ss 7.0 27440401 eCl@ss 8.0 27440401 eCl@ss 9.0 27440401 05/12/2019 Page 3 / 6 https://www.phoenixcontact.com/us/products/1701013 PCB terminal block - MKDSN 1,5/17 - 1701013 Classifications ETIM ETIM 3.0 EC001121 ETIM 4.0 EC002643 ETIM 5.0 EC002643 ETIM 6.0 EC002643 ETIM 7.0 EC002643 UNSPSC UNSPSC 6.01 30211801 UNSPSC 7.0901 39121432 UNSPSC 11 39121432 UNSPSC 12.01 39121432 UNSPSC 13.2 39121432 Approvals Approvals Approvals DNV GL / IECEE CB Scheme / SEV / EAC / cULus Recognized Ex Approvals Approval details DNV GL http://exchange.dnv.com/tari/ TAE00001EV IECEE CB Scheme http://www.iecee.org/ CH-8225 Nominal voltage UN 250 V Nominal current IN 13.5 A mm/AWG/kcmil 1.5 05/12/2019 Page 4 / 6 https://www.phoenixcontact.com/us/products/1701013 PCB terminal block - MKDSN 1,5/17 - 1701013 Approvals SEV https://www.electrosuisse.ch/de/meta/shop/produktezertifikate.html Nominal voltage UN 250 V Nominal current IN 13.5 A mm/AWG/kcmil 1.5 EAC cULus Recognized IK-3542-M1 B.01742 http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm D B Nominal voltage UN 300 V 300 V Nominal current IN 10 A 10 A mm/AWG/kcmil 30-14 30-14 E60425-19770427 Accessories Accessories Labeled terminal marker Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm Marker pen Marker pen - B-STIFT - 1051993 Marker pen, for manual labeling of unprinted Zack strips, smear-proof and waterproof, line thickness 0.5 mm 05/12/2019 Page 5 / 6 https://www.phoenixcontact.com/us/products/1701013 PCB terminal block - MKDSN 1,5/17 - 1701013 Accessories Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip Terminal marking Marker card - SK 5/3,8:UNBEDRUCKT - 0805409 Marker card, Card, white, unlabeled, can be labeled with: Marker pen, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm Phoenix Contact 2019 (c) - all rights reserved http://www.phoenixcontact.com 05/12/2019 Page 6 / 6