Ergebnisseite der Teileliste Partlist 09 66 323 7800 D-Sub - S PCB connector gender Termination shell Number of contacts Row pitch Board fixing Grounding flange Performance level Material < > Other applications male connector, right angled Turned solder pins tinned metal shell with dimples 25 way Row separation 2.84 mm without snap-in-clips without grounding board locks hole 3.1 mm Performance level 3 PBTP Note: Obligatory information about HARTING products can be obtained exclusively from the data sheets. The data sheet is up to date 2D files (c) Copyright 1999-2003 Harting KGaA and its licencors - Any suggestions and bug reports are welcome at: HARKIS@harting.com file:///F|/imaging/BITTING/CF_PROCESS/MANUA...262003/HART/TB_09663237800_BL02_R29733.HTML [October-07-2003 10:28:00 AM] Ergebnisseite der Teileliste Partlist 09 66 323 6800 D-Sub - S PCB connector gender Termination shell Number of contacts Row pitch Board fixing Grounding flange Performance level Material < > Other applications male connector, right angled Turned solder pins tinned metal shell with dimples 25 way Row separation 2.84 mm without snap-in-clips without grounding board locks hole 3.1 mm Performance level 2 PBTP Note: Obligatory information about HARTING products can be obtained exclusively from the data sheets. The data sheet is up to date 2D files (c) Copyright 1999-2003 Harting KGaA and its licencors - Any suggestions and bug reports are welcome at: HARKIS@harting.com file:///F|/imaging/BITTING/CF_PROCESS/MANUA...262003/HART/TB_09663236800_BL02_R29733.HTML [October-07-2003 10:28:02 AM] Ergebnisseite der Teileliste Partlist 09 66 323 5800 D-Sub - S PCB connector < gender Termination shell Number of contacts Row pitch Board fixing Grounding flange Performance level Material > Other applications male connector, right angled Turned solder pins tinned metal shell with dimples 25 way Row separation 2.84 mm without snap-in-clips without grounding board locks hole 3.1 mm Performance level S4 PBTP Note: Obligatory information about HARTING products can be obtained exclusively from the data sheets. Data sheets are available in following formats 2D files Typenblatt im PDF Typenblatt im DXF (c) Copyright 1999-2003 Harting KGaA and its licencors - Any suggestions and bug reports are welcome at: HARKIS@harting.com file:///F|/imaging/BITTING/CF_PROCESS/MANUA...262003/HART/TB_0966323x80x_BL02_R29733.HTML [October-07-2003 10:28:02 AM]