Chip Resistor Surface Mount
w
ww.yageo.com
Apr 24, 2009 V.4
Product specification
2
9
SERIES
RC
0603 (RoHS Compliant)
Y
YA
AG
GE
EO
O
B
BR
RA
AN
ND
D
o
or
rd
de
er
ri
in
ng
g
c
co
od
de
e
GLOBAL PART NUMBER (PREFERRED)
RC0603 X R - XX XXXX L
(1) (2) (3) (4) (5) (6)
(1) TOLERANCE
F = ±1%
J = ±5% (for Jumper ordering, use code of J)
(2) PACKAGING TYPE
R = Paper / PE taping reel
(3) TEMPERATURE COEFFICIENT OF RESISTANCE
– = Base on spec
(4) TAPING REEL
07 = 7 inch dia. Reel
10 = 10 inch dia. Reel
13 = 13 inch dia. Reel
(5) RESISTANCE VALUE
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point, no need
to mention the last zero after R/K/M, e.g.1K2, not 1K20.
Detailed resistance rules show in table of “Resistance rule of global part number”.
(6) OPTIONAL CODE
L = optional symbol (Note)
ORDERING INFORMATION -
GLOBAL PART NUMBER & 12NC
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
SCOPE
This specification describes
RC0603 series chip resistors
with lead-free terminations made
by thick film p rocess.
APPLICATIONS
All general purpose application
FEATURES
RoHS compliant
- Products with lead free
terminations meet RoHS
requirements
- Pb-glass contained in electrodes,
resistor element and glass are
exempted by RoHS
Reducing envir onmentally
hazardous wastes
High component and equipment
reliability
Saving of PCB space
None forbidden-materials used
in products/production
Halogen Free Epoxy
ORDERING EXAMPLE
The ordering code of a RC0603
chip resistor, value 56 X with
±1% tolerance, supplied in 7-inch
tape reel is: RC0603 FR-0756R(L).
NOTE
1. All our RSMD products meet RoHS
compliant. "LFP" of the internal 2D reel
label mentions "Lead Free Process"
2. On customized label, "LFP" or specific
symbol printed and the optional "L" at
the end of GLOBAL PART NUMBER /
12NC can be added (both are on
customer request)
Resistance rule of
global part
number
Resistance code rule
Example
0R 0R = Jumpe
r
XRXX
(1 to 9.76 Ω)
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XXRX
(10 to 97.6 Ω) 10R = 10 Ω
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω) 100R = 100 Ω
XKXX
(1 to 9.76 KΩ) 1K = 1,000 Ω
9K76 = 9760 Ω
XMXX
(1 to 9.76 MΩ) 1M = 1,000,000 Ω
9M76= 9,760,000 Ω
Chip Resistor Surface Mount
w
ww.yageo.com
Apr 24, 2009 V.4
Product specification
3
9
SERIES
RC
0603 (RoHS Compliant)
P
PH
HY
YC
CO
OM
MP
P
B
BR
RA
AN
ND
D
o
or
rd
de
er
ri
in
ng
g
c
co
od
de
es
s
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
GLOBAL PART NUMBER (PREFERRED)
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
(1) The resistors have a 12-digit ordering code starting wi th 2322 / 2350.
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
(3) The remaining 4 or 3 digits rep resent the resistance value with the
last di git indicating the multiplier as shown in the t able of
“Last digit of 12NC”.
(4) "L" is optional symbol (Note).
ORDERING EXAMPLE
The ordering code of a RC22 resi stor, value 56 X with ±1% tolerance,
supplied in tape of 5 ,000 units per reel is: 232270465609(L) or
RC0603FR-0756R(L).
Resistance decade (3) Last digit
0.01 to 0.0976 X 0
0.1 to 0.976 X 7
1 to 9.76 X 8
10 to 97.6 X 9
100 to 976 X 1
1 to 9.76 KX 2
10 to 97.6 KX 3
100 to 976 KX 4
1 to 9.76 MX 5
10 to 97.6 MX 6
Example: 0.02
X = 0200 or 200
0.3 X = 3007 or 307
1
X = 1008 or 108
33 KX = 3303 or 333
10 MX = 1006 or 106
Last digit of 12NC
NOTE
1. All our RSMD products are RoHS compliant. "LFP" of the internal 2D reel label mentions "Lead Free Process"
2. On customized label, "LFP" or specific symbol printed and the optional "L" at the end of GLOBAL PART NUMBER / 12NC can be added
(both are on customer request)
12NC CODE
2322 / 2350 XXX XXXXX L
(1) (2) (3) (4)
PAPER / PE TAPE ON REEL (units) (2)
TYPE/
06
03
START
IN (1)
TOL.
(%)
RESISTANCE
RANGE
5,000 10,000/not preferred
20,000
RC21
2322 ±5% 1 to 10 MΩ 702 60xxx 702 70xxx 702 81xx
x
RC22
2322 ±1% 1 to 10 MΩ 704 6xxxx 704 7xxxx 704 8xxx
x
HRC21
2350 ±5% 11 to 22 MΩ 522 10xxx - -
Jumper
2322 - 0 Ω 702 96001
702 97001 702 9200
2
Chip Resistor Surface Mount
w
ww.yageo.com
Apr 24, 2009 V.4
Product specification
4
9
SERIES
RC
0603 (RoHS Compliant)
CONSTRUCTION
The resistor is constructed o n top
of a high-grade ceramic body.
Internal metal electrodes are added
on each end to make the contacts to
the thick film resistive element. The
composition of the resistive elemen t
is a noble metal imbedded into a
glass and covered by a second glass
to prevent environme nt i nf lu ences.
The resistor is laser trimmed to the
rated resistance value. The resistor
is covered with a protective epoxy
coat, finally the two external
terminations (matte tin on Ni-
barrier) are added. See fig.4
DIMENSIONS
TYPE RC0603
L (mm) 1.60 ±0.10
W (mm) 0.80 ±0.10
H (mm) 0.45 ±0.10
I1 (mm) 0.25 ±0.15
I2 (mm) 0.25 ±0.15
Table 1
overcoat
Primary glass layer
resistive layer
(Jumper chip is a conductor)
inner electrode
termination(Ni/matte tin)
ceramic substrate
H
I2
YNSC065
marking layer
overcoat
W
L
I
1
O
OU
UT
TL
LI
IN
NE
ES
S
For dimension see Table
1
Fig. 4
Chip resistor outlines
MARKING
RC0603
E-24 series: 3 digits
First tw o digits f or signifi cant figu re and 3 rd digit
for number of zeros
E-96 series: 3 digits for 0603 ±1% EIA-96 marking
method
For 0603 ±1% E-24 series, one short bar under
marking letter
For further marking information, please see special data sheet “Chip resistors marking”.
Fig. 1 Value = 10 KΩ
YNSC001
03
Fig. 2 Value = 12.4 KΩ
Fig. 3 E-24 1% Value = 56 K Ω
ynsc003
563
Chip Resistor Surface Mount
w
ww.yageo.com
Apr 24, 2009 V.4
Product specification
5
9
SERIES
RC
0603 (RoHS Compliant)
ELECTRICAL CHAR
A
CTERISTICS
CHARACTERISTICS RC0603 1/10 W
Operating Temperature Range –55 °C to +155 °C
Maximum Working Voltage 50 V
Maximum Overload Voltage 100 V
Dielectric Withstanding Voltage 100 V
5% (E24) 1 Ω to 22 MΩ
1% (E24/E96) 1 Ω to 10 MΩ
Resistance Range
Zero Ohm Jumper < 0.05 Ω
1 Ω ≤ R ≤ 10Ω±200 ppm/°C
10 MΩ < R ≤ 22 MΩ±200 ppm/°C
Temperature Coefficient
10 Ω < R ≤ 10 MΩ±100 ppm/°C
Rated Current 1.0 A
Jumper Criteria Maximum Current 2.0 A
FOOTPRINT AND SOLDERING
PROFILES
For recommended footprint and
soldering profiles, please see the
special data sheet “Chip resistors
mounting”.
Table 2
PACKING STYLE AND P
A
CKAGING QUANTITY
PRODUCT TYPE PACKING STYLE REEL DIMENSION QUANTITY PER REEL
RC0603 Paper Taping Reel (R) 7" (178 mm) 5,000 units
10" (254 mm) 10,000 units
13" (330 mm) 20,000 units
NOTE
1. For paper tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”.
Table 3 Packing style and packaging quantity
MLB206_2
70 10055 50 Tamb( C)
o
(%P )
rated
00
50
100
155
P
handbook, halfpage
FUNCTIONAL DESCRIPTION
P
PO
OW
WE
ER
R
R
RA
AT
TI
IN
NG
G
RC0603 rated power at 70°C is 1/10 W
RATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following f ormula:
V=√(P X R)
or max. working voltage whichever is less
Where
V=Continuous rated DC or
AC (rms) working voltage (V)
P=Rated power (W)
R=Resist ance value (X)
Fig. 5
Maximum dissi pation ( P) in pe rcen tage of ra ted power as a
function of the operating ambient te mperature (Tamb)
Chip Resistor Surface Mount
w
ww.yageo.com
Apr 24, 2009 V.4
Product specification
6
9
SERIES
RC
0603 (RoHS Compliant)
TESTS AND REQUIREMENTS
TEST TEST METHOD PROCEDURE REQUIREMENTS
At +25/–55 °C and +25/+125 °C Temperature
Coefficient of
Resistance
(T.C.R.)
IEC 60115-1 4.8
Formula:
T.C.R= ------------------------- ×106 (ppm/°C)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
Refer to table 2
Life/Endurance IEC 60115-1 4.25.1
1,000 hours at 70±5 °C applied RCWV
1.5 hours on, 0.5 hour off, still air required ±(1.0%+0.05 Ω) for 1% tol.
±(3.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
High
Temperature
Exposure/
Endurance at
Upper Category
Temperature
IEC 60068-2-2 1,000 hours at 155±5 °C, unpowered ±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
Moisture
Resistance MIL-STD-202G Method-10 6G Each temperature / humidity cycle is defined at 8
hours, 3 cycles / 24 hours for 10d. with 25 °C /
65 °C 95% R.H, without steps 7a & 7b,
unpowered
Parts mounted on test-boards, without
condensation on parts
Measurement at 24±2 hours after test conclusion
±(0.5%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Thermal Shock MIL-STD-202G Method-107G -55/+125 °C
Number of cycles required is 300. Devices
unmounted
Maximum transfer time is 20 seconds. Dwell time
is 15 minutes. Air – Air
±(0.5%+0.05 Ω) for 1% tol.
±(1%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
Short Time
Overload IEC60115-1 4 .13 2.5 times of rated voltage or maximum overload
voltage whichever is less for 5 sec at room
temperature
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
No visible damage
Table 4 Test condition, procedure and requirements
R2–R1
R1(t2–t1)
Chip Resistor Surface Mount
w
ww.yageo.com
Apr 24, 2009 V.4
Product specification
7
9
SERIES
RC
0603 (RoHS Compliant)
TEST TEST METHOD PROCEDURE REQUIREMENTS
Board Flex/
Bending IEC 60068-2-21 Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
3 mm bending
Bending time: 60±5 seconds
±(1.0%+0.05 Ω) for 1%, 5% tol.
<50 mΩ for Jumper
No visible damage
Low
Temperature
Operation
IEC 60068-2-1 The resistor shall be subjected to a DC rated
voltage for 1.5 h-on, 0.5 h-off, at -55±3 °C
This constitutes shall be repeated for 96 hours
However the applied voltage shall not exceed
the maximum operating voltage
±(0.5%+0.05 Ω) for 1% tol .
±(1.0%+0.05 Ω) for 5% tol.
No visible damage
Insulation
Resistance IEC 60115-1 4.6 Rated continuous overload voltage (RCOV)
for 1 minute
Type RC0603
Voltage (DC) 100 V
≥10 GΩ
Dielectric
Withstand
Voltage
IEC 60115-1 4.7 Maximum voltage (Vrms) applied for 1 minute
Type RC0603
Voltage (AC) 100 Vrms
No breakdown or flashover
Resistance to
Solvent IPC/ JEDEC J- STD- 020D lsopropylalcohol (C3H7OH) followed by
brushing No smeared
Noise IEC 60115-1 4.12 Maximum voltage (Vrms) applied Resistors range
V
alue
R < 100 Ω 10 dB
100 Ω ≤ R < 1 KΩ 20 dB
1 KΩ ≤ R < 10 KΩ 30 dB
10 KΩ ≤ R < 100 KΩ
40 dB
100 KΩ ≤ R < 1 MΩ
46 dB
1 MΩ ≤ R ≤ 22 MΩ
48 dB
Biased Humidity
(steady state) IEC 6011 5-1 4.37 Steady state for 1000 hours at 85 °C / 85% R.H.
Biased voltage: U = 10% of Pn (V)
Max = Umax.
No condensation on the devices, circulating air
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Chip Resistor Surface Mount
w
ww.yageo.com
Apr 24, 2009 V.4
Product specification
8
9
SERIES
RC
0603 (RoHS Compliant)
TEST TEST METHOD PROCEDURE REQUIREMENTS
Intermittent
Overload IEC 60115-1 4.39 2.5 times of rated voltage or maximum
overload voltage whichever is less for 1 second
on and 25 seconds off; total 10,000 cycles
±(1.0%+0.05 Ω) for 1% tol.
±(2.0%+0.05 Ω) for 5% tol.
<100 mΩ for Jumper
Solderability
- Wetting
IPC/JEDEC J-STD-002B test B
Electrical Test not required
Magnification 50X
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
Well tinned (≥95% covered)
No visible damage
- Leaching IPC/JEDEC J-STD-002B test D
Leadfree solder, 260 °C, 30 seconds
immersion time No visible damage
- Resistance to
Soldering Heat IEC 6 0068-2-58 Condition B, no pre-heat of samples
Leadfree solder, 260 °C, 10 seconds
immersion time
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
±(0.5%+0.05 Ω) for 1% tol .
±(1.0%+0.05 Ω) for 5% tol.
<50 mΩ for Jumper
No visible damage
Chip Resistor Surface Mount
w
ww.yageo.com
Apr 24, 2009 V.4
Product specification
9
9
SERIES
RC
0603 (RoHS Compliant)
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
REVISION HISTORY
REVISION DATE CHANGE NOTIFICATION DESCRIPTION
Version 4 Apr 24, 2009 - - Test Items and methods updated
- Test requirements upgraded
Version 3 Jul 15, 2008 - - Change to dual brand datasheet that describe RC0603 with RoHS compliant
- Description of "Halogen Free Epoxy" added
- Define global part number
Version 2 Aug 19, 2004 -
Version 1 Aug 02, 2004 - - New datasheet for 0603 thick film 1% and 5% with lead-free terminations
- Replace the 0603 part of pdf files: RC01_11_21_31_5, RC02_12_22_32_10,
and HRC21_5_4
- Test method and procedur e updated
- PE tape added (paper tape will be replaced by PE tape)
- High ohmic products combined into standard products.
