SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE PICOD SERIES SUBMINIATURE PUSHWHEEL SWITCHES FEATURES Small panel mounting pushwheel switches. Models available with ESD protection - consult factory. Snap action detent with audible click. Black housing and drum with white printing. Gangable front mounting models with spacers and side covers. Gold wiping action contacts. P.C. board options include solderable lands. MATERIALS Body: PICOD SPECIFICATIONS Panel mounting hole: Height Width Installed depth with p.c. board: Short Long Insertion from front Insertion from rear PPO .590"(15mm) .300"(7.62mm) PC board: .945"(24mm) 1.358"(34.5mm) yes no FR 4 DIN 40802 IEC 249-2, Contact surface gold over nickel on copper Sliding contact: Gold over nickel on copper alloy CODES Code positions marking 111 Decimal 10 0-9 131 BCD 10 0-9 137 BCD comp 10 0-9 301 Hexadecimal 16 0-9, A-F(0-15) 307 Hexadec.Comp. 16 0-9, A-F(0-15) 400 change-over 10 +,-,+,-,etc.. see truth tables see truth tables see truth tables see truth tables see truth tables see truth tables STANDARD COLORS Housing,Drum,Printing 2 = black 3 = white 2,2,3 T ELECTRICAL DATA Operating voltage: Contact load, static: Contact load, dynamic: Contact resistance (type AK): 40 V max. 0.5 A max. 100 mA max. less than 100 mOhm TECHNICAL DATA Operating temperature range: Electric life, min. switching cycles Actuation force, approx (oz.): Weight, approx. (grams): Character height: 10 digit 16 digit Audible click Vibration DIN IEC 68, parts 2-6 Shock DIN 40046, part 7 -20C to 60C 100,000 11 2 .122" (3.1mm) .094" (2.4mm) yes yes yes Other special features are available upon request including: Factory set stops Red digits Decimal point Special codes or printing Gray housing See sockets at end of Pushwheel section. APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com T1 PICOD SERIES SUBMINIATURE PUSHWHEEL SWITCHES TRUTH TABLES CODE 137 BCD COMP. C 1 2 4 8 0 1 2 3 4 5 6 7 8 9 CODE 400 CHANGE-OVER C 1 2 4 8 C 0 1 2 3 4 5 6 7 8 9 A+ CODE 301 HEXADECIMAL 1 2 4 8 C A- + + + + + - CODE 111 DECIMAL C 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 CODE 307 HEXADEC. COMP. 0 1 2 3 4 5 6 7 8 9 A B C D E F C 1 2 4 8 0 1 2 3 4 5 6 7 8 9 A B C D E F MECHANICAL OUTLINE WITH PANEL CUT-OUT & MOUNTING n = number of switches T PIN CONNECTIONS 307 code available with AK p.c. option only. 111 code available with AL p.c. option only. 9 8 7 6 5 The switching mode is shorting - i.e. even during actuation, at least one output is connected to input C. T2 131 1 2 4 8 C 137 301 2 8 C 1 4 C 1 2 4 8 307 400 C 1 2 4 8 + C 111 0 1 2 3 4 C 301 131 C 1 2 4 8 1 2 4 8 C 137 2 8 C 1 4 APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE CODE 131 BCD PICOD SERIES SUBMINIATURE PUSHWHEEL SWITCHES PRINTED CIRCUIT OPTIONS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE P.C. boards have .039" (1mm) holes and are suitable for soldering or socket connection (with the exception of LED illumination option). AK short p.c. board AL long p.c. board for decimal version (solder terminal) ALD long (interrupted) p.c. board AL long p.c. board ALU long p.c. board LS p.c. board w/solder pins Dimensions are the same as AL. Space allows customer to add resistors, diodes, ect. Ordering information: Below is an order format that enables you to 'build your own switch' and specify the correct switch model number by simply selecting from available options shown and filling in the boxes. Consult factory for fully assembled switches. 'BUILD YOUR OWN SWITCH' ORDER FORMAT Series model P I Code P.C. board Terminations 2 C O D Note: For code 111, only model PICOD111AL2 is available. Standard colors 1 1 1 3 3 4 1 3 3 0 0 0 1 1 7 1 7 0 Decimal BCD BCD comp. Hexadecimal Hexadecimal comp. Change-over A A A A K L L L Short Long U Long (rt. angle) D Long (interrupted) (NONE) L S with p.c. solder pins Black housing & drum, white lettering. Example of complete model no.: PICOD131AL2 ACCESSORIES T Order separately PICODL2 Dummy switches These are empty plastic housings with the same dimensions as PICOD model (see outline). Use to fill hole where switch is not needed. PICORD Switches for rear mounting PICODP2 Pair of side covers PICODPK2 Pair of side covers PICODA2 Spacer PICODAH2 Spacer available on request. PICODL2 Dummy housing APEM, 63 NECK ROAD, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (978) 372-3534 E-mail: info@apem.com T3