CCO 100
TCXO
Corning Frequency Control • Worldwide Data Book 2001 v1.0.2000-11-01
Corning Frequency Control Inc. • 100 Watts Street • Mt. Holly Springs, PA 17065 • Tel 1-717-486-3411 • Fax 1-717-486-5920 • www.corningfrequency.com
Tele Quarz GmbH & Co. KG • Landstrasse • D-74924 Neckarbischofsheim, Germany • Tel +49-7268-801-0 • Fax +49-07268-801-281 • www.telequarz.de
1 / 2
Typical Applications Features
PCS Base Stations EFC Standard
Land Mobile Radio Standard (20 x 20mm) Package
Cellular Telephony Hermetically Sealed Package
Radio in the Local Loop Wide Temperature Range
Test Equipment High Stability
Frequency Range 0.5 MHz – 80 MHz
Standard Frequencies 10; 16.384;19.44; 38.88; 77.76 MHz
Frequency stabilities
Parameter Code I Frequency stability Operating temp range
07 ± 2.0 ppm
08 ± 1.0 ppm -40....+85°
03 ± 2.0 ppm
04 ± 1.0 ppm -20....+70°C
05 ± 1.0 ppm
vs. Operating temperature range
06 ± 0.5 ppm 0....50°C
Parameter Value Condition
vs. Supply voltage change
vs. Load change
vs. Aging / year
< ± 0.2 ppm
< ± 0.1 ppm
< ± 1.0 ppm
VS ± 5%
Load ± 5%
Frequency tuning
Parameter Option Value Condition
Mechanical (No EFC) T> ± 5.0 ppm (internal trimmer)
Electrical freq. control (EFC) > ± 5.0 ppm Note 1
Voltage range U0.0 V to 2.0 V @ VS = 5.0 V & 3.3 V
Pulling slope negative
Freq. control input impedance >10 k Ω
RF output
Parameter Code III Value Condition
Signal HCMOS
Load 25pF ± 10% @ < 20 MHz
15pF ± 10% @ ≥ 20 MHz
Duty cycle 40/60% @ VS/2
Subharmonics
06
< -45 dBc @ > 33 MHz
Supply voltage
Parameter Code II Value Condition
Supply voltage (VS)05 5.0 V ± 5%
Current consumption 3 mA to 10 mA Sinewave
5 mA to 50mA HCMOS
Supply voltage (VS)33 3.3 V ± 5%
Current consumption 3 mA to 10 mA Sinewave
5 mA to 50 mA HCMOS
CCO 100
TCXO
Corning Frequency Control • Worldwide Data Book 2001 v1.0.2000-11-01
Corning Frequency Control Inc. • 100 Watts Street • Mt. Holly Springs, PA 17065 • Tel 1-717-486-3411 • Fax 1-717-486-5920 • www.corningfrequency.com
Tele Quarz GmbH & Co. KG • Landstrasse • D-74924 Neckarbischofsheim, Germany • Tel +49-7268-801-0 • Fax +49-07268-801-281 • www.telequarz.de
2 / 2
Additional parameters
Parameter Value Condition
Phase Noise <- 105 dBc/Hz 10 Hz Note 2
<-135 dBc/Hz 100 Hz
<-145 dBc/Hz 1kHz
<-150 dBc/Hz 10 kHz
<-155 dBc/Hz 100 kHz
Weight < 10 g
Operable temperature range -40 ... +90°C
Storage temperature range -55 ... +105°C
Processing & Packing handling&processing note
Enclosure
Type G143
Drawing
0,5max.
±0,5
±0,5
7,62
15,24
20,5max.
ø0,45
4,5min. H
3,5
5,0
5,0
option
1 2 3
54
G143
H = 10,5max.; G143 Standard
all units in mm
Pin Connections
Pin 1Supply Voltage (Vs)
Pin 2RF output
Pin 3GND, case
Pin 4Control Voltage (Vc) Option U Electrical freq. Control
Pin 4N.C. Option T Mechanical freq. Control
Pin 5N.C.
Ordering Code Option Code I Code II Code III
Model Frequency
tuning Frequency
Stability Supply
Voltage RF
Output Frequency
Example: CC0100 T03. 05. 02. 10M00000
Order: CCO100
Notes
1Other available
2Typical values @ 10 MHz
Unless otherwise stated all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency control
voltage, load, temperature (25°C)
Subject to technical modification; Not all options are available at all Frequencies
