BYM12-50 thru BYM12-400, EGL41A thru EGL41G Vishay General Semiconductor Surface Mount Glass Passivated Ultrafast Rectifier (R) Major Ratings and Characteristics IF(AV) 1.0 A VRRM 50 V to 400 V IFSM 30 A trr 50 ns VF 1.0 V, 1.25 V Tj max. 175 C ed* t n e Pat *Glass-plastic encapsulation is covered by Patent No. 3,996,602, brazed-lead assembly to Patent No. 3,930,306 DO-213AB (GL41) Features Mechanical Data * * * * * * * * Case: DO-213AB, molded epoxy over glass body Epoxy meets UL-94V-0 Flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002B and JESD22-B102D E3 suffix for commercial grade, HE3 suffix for high reliability grade (AEC Q101 qualified) Polarity: Two bands indicate cathode end - 1st band denotes device type and 2nd band denotes repetitive peak reverse voltage rating Cavity-free glass-passivated junction Ideal for automated placement Ultrafast reverse recovery time Low switching losses, high efficiency High forward surge capability Meets environmental standard MIL-S-19500 Meets MSL level 1, per J-STD-020C Solder Dip 260 C, 40 seconds Typical Applications For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer, automotive and Telecommunication Maximum Ratings TA = 25 C unless otherwise specified Parameter Symbol Fast efficient device: 1st band is Green Polarity color bands (2nd Band) BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400 EGL41A EGL41B EGL41C EGL41D EGL41F EGL41G Unit Gray Red Pink Orange Brown Yellow Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 V Maximum RMS voltage VRMS 35 70 105 140 210 280 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 V Maximum average forward rectified current at TT = 75 C IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 30 A TJ,TSTG - 65 to + 175 C Operating junction and storage temperature range Document Number 88581 10-Aug-05 www.vishay.com 1 BYM12-50 thru BYM12-400, EGL41A thru EGL41G Vishay General Semiconductor Electrical Characteristics TA = 25 C unless otherwise specified Parameter Test condition Symbol BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 BYM12-400 EGL41A EGL41B EGL41C EGL41D EGL41F 1.0 Unit EGL41G 1.25 V at 1.0 A VF TA = 25 C TA = 125 C IR 5.0 50 A Max. reverse recovery time at IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns Typical junction capacitance at 4.0 V, 1 MHz CJ Maximum instantaneous forward voltage(1) Maximum DC reverse current at rated DC blocking voltage(1) 20 14 pF Notes: (1) Pulse test: 300 s pulse width, 1 % duty cycle Thermal Characteristics TA = 25 C unless otherwise specified Parameter Symbol BYM12-50 BYM12-100 BYM12-150 BYM12-200 BYM12-300 EGL41A EGL41B EGL41C RJA RJT Maximum thermal resistance (1, 2) EGL41D BYM12-400 EGL41F Unit EGL41G 60 30 C/W Notes: (1) Thermal resistance from junction to ambient, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal (2) Thermal resistance from junction to terminal, 0.24 x 0.24" (6.0 x 6.0 mm) copper pads to each terminal Ratings and Characteristics Curves (TA = 25 C unless otherwise specified) 30 Peak Forward Surge Current (A) Average Forward Rectified Current (A) 1.0 0.5 Resistive or Inductive Load 0 0 25 50 75 100 125 150 175 Lead Temperature ( C) Figure 1. Maximum Forward Current Derating Curve www.vishay.com 2 TJ = TJ max. 8.3ms Single Half Sine-Wave 25 20 15 10 5.0 0 1 10 100 Number of Cycles at 60 HZ Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Document Number 88581 10-Aug-05 BYM12-50 thru BYM12-400, EGL41A thru EGL41G Vishay General Semiconductor 70 Pulse Width = 300 s 1% Duty Cycle 10 TJ = 150 C 1 TJ = 25 C 0.1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 50 40 30 20 10 EGL41A - EGL41D EGL41F - EGL41G 0.01 0.2 TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 60 Junction Capacitance (pF) Instantaneous Forward Current (A) 50 EGL41A - EGL41D EGL41F - EGL41G 0 0.1 1.8 1 Instantaneous Forward Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics 100 Figure 5. Typical Junction Capacitance 1,000 100 Transient Thermal Impedance (C/W) Instantaneous Reverse Leakage Current (A) 10 Reverse Voltage (V) 100 TJ = 150C 10 TJ = 100 C 1 0.1 TJ = 25 C 20 40 60 80 1 0.1 0.01 0.01 0 10 100 Percent of Rated Peak Reverse Voltage (%) 0.1 1 10 100 Pulse Duration, sec. (t) Figure 4. Typical Reverse Leakage Characteristics Figure 6. Typical Transient Thermal Impedance Package outline dimensions in inches (millimeters) DO-213AB (GL41) SOLDERABLE ENDS 1st BAND D2 0.022 (0.56) 0.018 (0.46) 0 D2 = D1+- 0.008 (0.20) D1= 0.105 0.095 (2.67) (2.41) 0.022 (0.56) 0.018 (0.46) 0.205 (5.2) 0.185(4.7) 1st band denotes type and positive end (cathode) Document Number 88581 10-Aug-05 www.vishay.com 3 Legal Disclaimer Notice Vishay Notice Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc., or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies. Information contained herein is intended to provide a product description only. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Vishay for any damages resulting from such improper use or sale. Document Number: 91000 Revision: 08-Apr-05 www.vishay.com 1