1.27 mm pitch connector Right-angle through hole type male connector for PCB RPS-( )RLM-( )+ For PCB Right-angle Through hole KINK shape Configuration of product Part No. RPS- ( ) RLM- ( )+ Series name No. of contacts: 20, 26, 34, 40, 50, 52, 60, 68, 80, 100 or 120 Type of contact RLM: Right-angle through hole type, male with latch Misinsertion-prevention-key grooves Blank: None For using key grooves, refer to the drawing shown below. A 4 For 20-contact connector 3 2 1 For 60-contact connector B 8.89 A D A B C HONDA 8.89 8.89 20 28.5 34.29 For 26-contact connector 4 B B A 12.7 E 1 2 3 D C 8.89 8.89 For 34-contact connector 0.3 7.2 3.4 5.6 2.54 1.27 4 17.78 C F 2-o2.7 LAST POS. E POS.#1 13.5 REF. C A B 8.89 8.89 46.99 6 For 50contact connector 5 4 3 2 1 For 100-contact 1 connector 2 F 8.89 C B 8.89 8.89 A A C B 8.89 8.89 E D 8.89 56.69 27.94 For 52contact connector 2 1 For 120contact connector D C A B 8.89 1.9053 4 kink-formed places (See marks) 1 21.59 D 2 E D 8.89 A B 8.89 3.9 TM 3 8.89 1.27 D Key grooves 8.89 For 80-contact connector 1 2 A B A B 7.62 For 40-contact connector C 1 39.37 C C 2 For 68-contact connector 8 7 6 5 4 H G F E 8.89 8.89 8.89 8.89 D 3 2 1 A C B 8.89 8.89 8.89 72.35 29.21 Key-location symbols and key-groove dimensions Dimensions o0.80.06 1.9050.05 Components Latch Insulator Ground pin Bracket Standard location symbol for key groove location Part No. RPS-20RLM-( )+ A 30.4 B 18.77 C 11.43 D 16.17 E 21.59 RPS-26RLM-( )+ 34.2 22.58 15.24 19.98 25.40 RPS-34RLM-( )+ 39.3 27.66 20.32 25.06 30.48 RPS-40RLM-( )+ 43.1 31.47 24.13 28.87 34.29 RPS-50RLM-( )+ 49.5 37.82 30.48 35.22 40.64 RPS-52RLM-( )+ 50.7 39.09 31.75 36.49 41.91 LAST POS. Form of 20,40,52,60,68,80,100 RPS-60RLM-( )+ Mating side or 120-contact connectors RPS-68RLM-( )+ 55.8 44.17 36.83 41.57 46.99 1D,4A,AD 60.9 49.25 41.91 46.65 52.07 1E,4A,AE RPS-80RLM-( )+ 68.5 56.87 49.53 54.27 59.69 1F,4A,AF RPS-100RLM-( )+ 81.2 69.57 62.23 66.97 72.39 1F,6A,AF RPS-120RLM-( )+ 93.9 82.27 74.93 79.67 85.09 1H,8A,AH 0.1 C 1.270.05 POS.#1 Form of 20,40,52,60,68,80,100 or 120-contact connectors POS.#1 POS.#1 Recommended PCB layout Contacts A,B,AB 1C,2A,AC 1D,2A,AD Mating connectors: RPS-( )FK+, RPS-D( )( )F( )+ RPS-D80( )FC( )+ (80-contact connector only) Others Wire wrapping Crimping Soldering IDC Press-in SMT Through hole