Data Display Products 900 (4) 4,300 (*4) 1,300 (*4) 1,200 (*2) 325 (*2) 609 592 520 465 \ | | Ml " T-374 MINIATURE LAMP WITH LENS High Intensity, Wide Angle - Fresnel Lens - Bayonet or Screw Base Voltage/Current Design Max Vilif Vflif Table | 5V/75mA 5.5V/85mA 6V/40mA 7V/60mA 12V/30mA 14V/40mA 15V/30mA 16.5V/35mA 24V/30MA 26V/35mA 28V/25mA 30V/28mA 48V/20mMA 52V/22mA 60V/16mA 65V/18MA 120VAC/9.5mA | 130VAC/10.5mA Table Il 5V/26mA 5.5V/35mA 6V/28mMA 7V/39MA 12V/15mA 14V/22mA 15V/15mA 16.5V/19MA 24V/15mA 26V/18mA 28V/15mA 30V/18MA 48V/9mA 50V/9.5mA 60V/6.5mA 65V/7.2mMA 120VAC/5mA_ | 130VAC/5.5mA [1] All Models are center anode. Insert C after Model for center cathode (e.g. MB402C). [2] lv = typical luminous intensity per LED @ If = 20mA (Ta=25C). (*4) = 4 LEDs per package; (*2) = 2 LEDs per package. [3] See Voltage/Current table for design specifications. [4] Ta = 25C. Voltages 6 through 60 are VDC. For AC operation, insert AC after the Voltage (e.g. 24AC), not required for 120V. Contact factory for VAC design currents. For 120VDC insert DC after Voltage (e.g. 120DC). Select one BOLD component from each SHADED column in the table Part Number MB402-R12-CW-BP: To Order: Example: { + 2.5911 5.0) 1.39(35.3) Cathode {~+ @.36(9.1) MB402 445 S. Douglas St., El Segundo CA 90245-4630 e (800) 421-6815 (310) 640-0442 FAX (310) 640-7639 | +2.59(15.0) 1,38(35.1) Cathode s FE @.36(9.1) MS402 All dimensions are in inches(mm) Tolerances: .xx"(.x) +.025"(.63) / .xxx"(.xx}t.010"(.25) Specifications are subject to change without notice. 95 1998 Data Display Products