SN54BCT25244, SN74BCT25244 25- OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS064A - JUNE 1990 - REVISED NOVEMBER 1993 * * * * * SN54BCT25244 . . . JT OR W PACKAGE SN74BCT25244 . . . DW OR NT PACKAGE (TOP VIEW) State-of-the-Art BiCMOS Design Significantly Reduces ICCZ ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015; Exceeds 200 V Using Machine Model (C = 200 pF, R = 0) Designed to Facilitate Incident-Wave Switching for Line Impedances of 25 or Greater Distributed VCC and GND Pins Minimize Noise Generated by the Simultaneous Switching of Outputs Package Options Include Plastic Small-Outline (DW) Packages, Ceramic Chip Carriers (FK) and Flatpacks (W), and Standard Plastic and Ceramic 300-mil DIPs (JT, NT) 1Y1 GND 1Y2 1Y3 GND 1Y4 2Y1 GND 2Y2 2Y3 GND 2Y4 1 24 2 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 12 13 1OE 1A1 1A2 VCC 1A3 1A4 2A1 2A2 VCC 2A3 2A4 2OE SN54BCT25244 . . . FK PACKAGE (TOP VIEW) 1A4 2A1 2A2 NC VCC 2A3 2A4 description These 25- octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. 4 1A3 VCC 1A2 NC 1A1 1OE 1Y1 3 2 1 28 27 26 25 6 24 7 23 8 22 9 21 10 20 19 11 12 13 14 15 16 17 18 2OE 2Y4 GND NC 2Y3 2Y2 GND GND 1Y2 1Y3 NC GND 1Y4 2Y1 These buffers are capable of sinking 188-mA IOL, which facilitates switching 25- transmission lines on the incident wave. The distributed VCC and GND pins minimize switching noise for more reliable system operation. 5 When the output-enable (1OE and 2OE) inputs are low, the device transmits data from the A inputs to the Y outputs. When 1OE and 2OE are high, the outputs are in the high-impedance state. NC - No internal connection The SN54BCT25244 is characterized for operation over the full military temperature range of - 55C to 125C. The SN74BCT25244 is characterized for operation from 0C to 70C. FUNCTION TABLE (each buffer/driver) INPUTS OE A OUTPUT Y L H H L L L H X Z Copyright 1993, Texas Instruments Incorporated PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 2-1 SN54BCT25244, SN74BCT25244 25- OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS064A - JUNE 1990 - REVISED NOVEMBER 1993 logic symbol 1OE 1A1 1A2 1A3 1A4 24 logic diagram (positive logic) 1OE EN 23 1 22 1 3 20 4 19 6 1Y1 1A1 13 1Y3 1A2 2A2 2A3 2A4 18 EN 17 1 7 9 15 10 14 12 1 22 3 20 4 1Y3 19 6 1Y4 1Y1 1Y2 1Y4 1A4 2A1 23 1Y2 1A3 2OE 24 2Y1 2Y2 2Y3 2OE 13 2Y4 This symbol is in accordance with ANSI/IEEE Std 91-1984 and IEC Publication 617-12. 2A1 2A2 2A3 2A4 18 7 17 9 15 10 14 12 2Y1 2Y2 2Y3 2Y4 Pin numbers shown are for the DW, JT, NT, and W packages. absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage range, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 0.5 V to 7 V Input voltage range, VI (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 0.5 V to 7 V Voltage range applied to any output in the disabled or power-off state, VO . . . . . . . . . . . . . . . . - 0.5 V to 5.5 V Voltage range applied to any output in the high state, VO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 0.5 V to VCC Input clamp current, IIK (VI < 0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 30 mA Current into any output in the low state, IO: SN54BCT25244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 250 mA SN74BCT25244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 376 mA Operating free-air temperature range: SN54BCT25244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 55C to 125C SN74BCT25244 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0C to 70C Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTE 1: The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2-2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SN54BCT25244, SN74BCT25244 25- OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS064A - JUNE 1990 - REVISED NOVEMBER 1993 recommended operating conditions (see Note 2) SN54BCT25244 SN74BCT25244 MIN NOM MAX MIN NOM MAX 4.5 5 5.5 4.5 5 5.5 UNIT VCC VIH Supply voltage VIL IIK Low-level input voltage 0.8 0.8 V Input clamp current -18 -18 mA IOH IOL High-level output current - 53 - 80 mA 188 mA 70 C High-level input voltage 2 2 Low-level output current V 125 TA Operating free-air temperature NOTE 2: Unused or floating inputs must be held high or low. - 55 125 V 0 electrical characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER VIK VOH VOL TEST CONDITIONS VCC = 4.5 V, VCC = 4.75 V, II = -18 mA IOH = - 3 mA VCC = 4 4.5 5V IOH = - 53 mA IOH = - 80 mA VCC = 4.5 V SN54BCT25244 MIN TYP MAX SN74BCT25244 MIN TYP MAX -1.2 -1.2 V 2.7 V 2 2 IOL = 94 mA IOL = 125 mA 0.38 0.55 0.42 0.55 V 0.8 IOL = 188 mA VI = 5.5 V 0.7 II IIH VCC = 5.5 V, VCC = 5.5 V, IIL IOZH VCC = 5.5 V, VCC = 5.5 V, IOZL ICCL VCC = 5.5 V, VCC = 5.5 V, Outputs open 90 119 ICCH ICCZ VCC = 5.5 V, VCC = 5.5 V, Outputs open 59 78 7 11 Ci VCC = 5 V, VCC = 5 V, VI = 2.5 V or 0.5 V VO = 2.5 V or 0.5 V Co UNIT VI = 2.7 V VI = 0.5 V VO = 2.7 V VO = 0.5 V Outputs open 0.1 0.1 mA 20 20 A - 0.6 - 0.6 mA 50 50 A - 50 - 50 A 90 119 mA 59 78 mA 7 11 mA 5.5 5.5 pF 17 17 pF All typical values are at VCC = 5 V, TA = 25C. switching characteristics over recommended ranges of supply voltage and operating free-air temperature, CL = 50 pF (unless otherwise noted) (see Note 3) FROM (INPUT) TO (OUTPUT) tPLH tPHL A Y tPZH tPZL OE Y tPHZ tPLZ OE Y PARAMETER VCC = 5 V, TA = 25C SN54BCT25244 SN74BCT25244 MIN TYP MAX MIN MAX MIN MAX 1 3.2 4.9 1 5.6 1 5.5 2 4 5.6 2 6.3 2 6 3.2 5.6 8.5 3.2 9.7 3.2 9.3 3.7 6.3 9.2 3.7 10.4 3.7 10.2 1.6 3.6 5.5 1.6 6.5 1.6 6.3 3.1 5.3 7.8 3.1 9.5 3.1 8.4 UNIT ns ns ns NOTE 3: Load circuits and voltage waveforms are shown in Section 1. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 2-3 SN54BCT25244, SN74BCT25244 25- OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCBS064A - JUNE 1990 - REVISED NOVEMBER 1993 2-4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 11-Nov-2009 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty SN74BCT25244DW ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74BCT25244DWE4 ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74BCT25244DWG4 ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74BCT25244DWR ACTIVE SOIC DW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74BCT25244DWRE4 ACTIVE SOIC DW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74BCT25244DWRG4 ACTIVE SOIC DW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74BCT25244NT ACTIVE PDIP NT 24 15 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type SN74BCT25244NTE4 ACTIVE PDIP NT 24 15 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 29-Jul-2009 TAPE AND REEL INFORMATION *All dimensions are nominal Device SN74BCT25244DWR Package Package Pins Type Drawing SOIC DW 24 SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) 2000 330.0 24.4 Pack Materials-Page 1 10.75 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 15.7 2.7 12.0 24.0 Q1 PACKAGE MATERIALS INFORMATION www.ti.com 29-Jul-2009 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74BCT25244DWR SOIC DW 24 2000 346.0 346.0 41.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in such safety-critical applications. TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are specifically designated by TI as military-grade or "enhanced plastic." Only products designated by TI as military-grade meet military specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, TI will not be responsible for any failure to meet such requirements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Applications Audio www.ti.com/audio Communications and Telecom www.ti.com/communications Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps DLP(R) Products www.dlp.com Energy and Lighting www.ti.com/energy DSP dsp.ti.com Industrial www.ti.com/industrial Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical Interface interface.ti.com Security www.ti.com/security Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com Wireless www.ti.com/wireless-apps RF/IF and ZigBee(R) Solutions www.ti.com/lprf TI E2E Community Home Page e2e.ti.com Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2011, Texas Instruments Incorporated