PNP Low Saturation Transistor
FPN630
FPN630A
Absolute Maximum Ratings* T A = 25°C unless otherwise noted
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Thermal Characteristics T A = 25°C unless otherwise noted
These devices are designed for high current gain and low
saturation voltage with collector currents up to 3.0 A continuous.
Sourced from Process PC.
Symbol Characteristic Max Units
FPN630 / FPN630A
PDTotal Device Dissipation 1.0 W
RθJC Thermal Resistance, Junction to Case 50 °C/W
RθJA Thermal Resistance, Junction to Ambient 125 °C/W
Symbol Parameter Value Units
VCEO Collec t or-Emitt er V oltage 30 V
VCBO Collec t or-Base Voltage 35 V
VEBO Emi tter-Base Voltage 5.0 V
ICCollect or Current - Continuous 3.0 A
TJ, Tstg Operating and Storage Junc tion Temperature Range -55 to +150 °C
TO-226
CBE
1999 Fairchild Semiconductor Corporation
FPN630 / FPN630A
NOTES:
1) These ratings are based on a maximum junction temperature of 150 degrees C.
2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations.
3) All voltages (V) and currents (A) are negative polarity for PNP transistors.
Electrical Characteristics T A = 25°C unless otherwise noted
OFF CHARACTERISTICS
Symbol Parameter T est Conditions Min Max Units
BVCEO Collector-Emitter Breakdown
Voltage IC = 10 mA, IB = 0 30 V
BVCBO Collector-Base Breakdown Voltage IC = 100 µA, IE = 0 35 V
BVEBO Emitter-Base Breakdown Voltage IE = 100 µA, IC = 0 5.0 V
ICBO Collector Cutoff Current VCB = 30 V, IE = 0
VCB = 30 V, IE = 0, TA = 100°C100
10 nA
µA
IEBO Emitter Cutoff Current VEB = 4.0 V, IC = 0 100 nA
ON CHARACTERISTICS*
hFE DC Current Gain IC = 100 mA, V CE = 2. 0 V 630
630A
IC = 1.0 A, VCE = 2.0 V
IC = 2.0 A, VCE = 2.0 V
100
250
60
40
VCE(sat)Collector-Emit t e r S aturation Voltage IC = 1.0 A, I B = 100 m A 630
630A
IC = 2.0 A, I B = 200 m A
300
250
500
mV
mV
mV
VBE(sat)Base-Emitter Sat urat i on Voltage IC = 1.0 A, I B = 100 m A 1.25 V
VBE(on)Base-Emitter Sat urat i on Voltage IC = 1.0 A, V CE = 2.0 V 1.0 V
SMALL SIGNAL CHARACTERISTICS
Cobo Output Capacitance VCB = 10 V, I E = 0, f = 1.0 MHz 100 pF
FTTransition Frequency IC = 100 mA , V CE = 5.0 V,
f = 100 MHz 100 MHz
*Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0%
NOTE: All voltages (V) and currents (A) are negative polarity for PNP transistors.
PNP Low Saturation Transistor
(continued)
FPN630 / FPN630A
Typical Characteristics
I n put /Outp ut C a pa cit a nce vs
Reverse Bia s Volt age
0.1 0.5 1 10 20 50 100
0
50
100
150
200
250
300
350
400
450
500
V - COLLECTOR VOLTAGE (V)
CAPACIT ANCE (pf)
CE
C
ibo
C
obo
f = 1.0MHz
Base-Emitt er Saturation
Vol tage vs C ollector Cu rren t
0.001 0.01 0.1 1 10
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
I - COLLECTOR CURRENT (A)
V -BASE-EMI TTER SATURATION VO LTAGE(V)
C
BESAT
25 °C
- 40 °C
125 °C
β = 10
B a se -E m i tter On Vo ltage v s
Collector Current
0.0001 0.001 0.01 0.1 1 10
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
I - COLL ECTO R CURR ENT (A)
V - BASE-EMI TTER O N V O LTAGE ( V)
C
BEON
25 °C
- 40 °C
125 °C
V = 2.0V
ce
PNP Low Saturation Transistor
(continued)
FPN630 / FPN630A
Current Gain vs Collector Current
0.0001 0.001 0.01 0.1 1 10
0
100
200
300
400
500
600
I - CO LL E CT O R CURR ENT ( A)
H - CURRENT GAIN
C
FE
25°C
125°C
- 40°C
V = 2.0V
ce
Collector-Emitter Saturation
Vol tage vs Collecto r Cu rren t
0.01 0.1 1 10
0
0.2
0.4
0.6
0.8
1
I - COL LECTO R CU RRENT ( A)
V - COLL ECTOR- EMITTER VOLTAGE (V)
C
CESAT
- 40°C
25°C
12 5°C
β = 10
Power Dissipation vs
Ambien t Temperatur e
0 25 50 75 100 125 150
0
0.25
0.5
0.75
1
TEM PERATURE ( C)
P - POWER DISSIPATION (W)
°
D
TO-226
TO-226AE Tape and Reel Data
October 1999, Rev. A1
TO-226AE Packaging
Configuration: Figur e 1.0
1,500 un its per
EO70 box for
std option
5EO70boxesper
Intermediate Box
FSCINT Label
530mm x 130mm x 83mm
Intermediate box
7,500 un its maximum
per intermediate box
for std option
FSCINT Barcode Label
114mm x 102mm x 51mm
EO70 Immediate Box
Anti-static
Bubble Sheets
(TO-226AE) BULK PACKING INFORMATION
EOL CODE DESCRIPTION LEADCLIP
DIMENSION QUANTITY
J18Z TO-18 OPTION STD NO LEAD CLIP 1.0 K / BOX
J05Z TO-5 OPTION STD NO LEAD CLIP 1.0 K / BOX
NO EOL
CODE TO-226 STANDARD
STRAIGHT NO LEADCLIP 1.5 K / BOX
TO-226AE TNR/AMMO PACKING INF ROMATION
Packing Style Quantity EOL code
Reel A 2,000 D26Z
E2,000 D27Z
Ammo M 2,000 D74Z
P2,000 D75Z
Unit weight = 0.300gm
Reel weight with components = 0.868 kg
Ammo weight with components = 0.880 kg
Max quantity per intermediate box = 10,000 units
AMMO PACK OPTION
See Fig 3.0 for2 Ammo
Pack Options
BULK OPTION
See Bulk Packing
Information table
375mm x 267mm x 375mm
Intermediate Box
FSCINT
Label
Customized
Label
333mm x 231mm x 183mm
Intermediate Box
FSCINT
Label
Customized
Label
F63TNR
Barcode Label
5 Ammo box es per
Intermediate Box
Customized
Label
327mm x 158mm x 135mm
Immed iate Box
LOT: CBVK741B019
NSID: PN2222N
D/C1: D9842 SPEC RE V: B2
SPEC:
QTY: 10000
QA REV:
FAIRCHILD SEMICONDUCTOR CORPORATION HTB:B
(FSCINT)
F63TNR
Label
Customized
Label
5 Reels per
Intermediate Box
TAPE and REELOPTION
See Fig 2.0 for various
Reeling Styles
F63TNR Label sample
FSCINT Label sampl e
Customized
Label
LOT: CBVK741B019
FSID: PN222N
D/C1: D9842 QTY1: SPEC REV:
SPEC:
QTY: 2000
D/C2: QTY2: CPN: N/F: F (F63TNR)3
©2000 Fairchild Semiconductor International
TO-226AE Tape and Reel Data, continued
October 1999, Rev. A1
TO-226AE Reeling Style
Configuration:
Figure 2.0
Style "A" D26Z, D70Z (s/h)
Machine Option"A"(H)
Style "E" D27Z, D71Z (s/h)
Machine Option"E"(J)
FIRST WIRE OFF IS EMITTER (ON PKG. 92)
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON BOTTOM
FIRST WIRE OFF IS COLLECTOR
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON TOP
ORDER STYLE
D75Z (P)
FIRST WIRE OFF IS COLLECTOR (ON PKG. 92)
ADHESIVE TAPE IS ON THE TOP SIDE
FLAT OF TRANSISTOR IS ON TOP
FIRST WIRE OFF IS EMITTER
ADHESIVE TAPE IS ON BOTTOM SIDE
FLAT OF TRANSISTOR IS ON BOTTOM
ORDER STYLE
D74Z (M)
TO-226AE Radial Ammo Packaging
Configuration:
Figure 3.0
T O-226AE Tape and Reel Data, continued
October 1999, Rev. A1
ITEM DESCRIPTION
Baseof Package to Lead Bend
Component Height
Lead Clinch He ight
Component Base Height
Component Alignment (side/side)
Component Alignment ( front/back )
Component Pitch
Feed Hole Pi tch
HoleCenter to First Lead
HoleCenterto Component Center
Lead Spread
Lead Thickness
Cut Lead Length
Taped Lead Lengt h
Taped LeadThickness
Carrier Tape Thickness
Carrier TapeWidth
Hold - down Tape Width
Hold - down Tape position
Feed Hole Position
Sprocket Hole Diameter
Lead Spring Out
SYMBOL
b
Hb
HO
H1
Pd
Hd
P
PO
P1
P2
F1/F2
d
L
L1
t
t1
W
WO
W1
W2
DO
S
DIMENSION
0.098 (ma x)
1.078 (+/- 0 .050 )
0.630 (+/- 0 .020 )
0.748 (+/- 0 .020 )
0.040 (ma x)
0.031 (max)
0.500 (+/- 0 .020 )
0.500 (+/- 0 .008 )
0.150 (+0.0 09, -0.01 0 )
0.247 (+/- 0 .007 )
0.104 (+/- 0 .010)
0.018 (+0.0 02, -0.00 3)
0.429 (ma x)
0.209 (+0.0 51, -0.052)
0.032 (+/- 0 .006 )
0.021 (+/- 0 .006)
0.708 (+0.0 20, -0.019)
0.236 (+/- 0 .012 )
0.035 (ma x)
0.360 (+/- 0 .025 )
0.157 (+0.0 08, -0.00 7)
0.004 (ma x)
Note : All dimensions are in inches.
Hb
H1 HO
PO
P2
P1 F1
DO
PPd
b
d
L1
LS
WO W2
W
t
t1
Hd
W1
ITEM DESCRIPTION SYMBOL MINIMUM MAXIMUM
Reel Diameter D1 13.975 14.025
Arbo r Hole Diameter (Standard) D2 1.160 1.200
(Small Hole) D2 0.650 0.700
Core Diameter D3 3.100 3.300
Hub Recess Inner Diameter D4 2.700 3.100
Hub Recess Dept h W 1 0.370 0.570
Flange to FlangeInner W idth W 2 1.630 1.690
Hu b to Hub Cente r W idth W 3 2.09 0
Note: All dimensions are inches
SEN SI TIV E D EVIC ES
ELECTROSTATIC
D1
D3
W2
W1
W3
D4
D2
TO-226AE Tapeand Reel Taping
Dimension Configuration:
Figur e 4.0
TO-226AE Reel
Configuration:
Figur e 5.0
User DirectionofFeed
Customized Label
F63TNR Label
TO-226AE (FS PKG Code 95, 99)
TO-226AE Package Dimensions
October 1999, Rev. A1
1:1
Scale 1:1 on letter size paper
Dimensions shown below are in:
inches [millimeters]
Part Weight per unit (gram): 0.300
S0.51-0.36;
S0.76-
0.36;
S1.40-1.14;
S1.40-1.14;
S4.70-4.32;
S2.41-2.13;
S4.45-3.81;
5" TYP
S1.52-1.02;
2" TYP
2" TYP
S7.73-7.10;
S7.87-7.37;
S15.61-14.47;
S1.65-1.27;
0.51
S0.48-0.30;
TO-226AE (95,99)
1
99 95
3CB
2BC
1EE
PIN
32
For leadformed option ordering,
refer to Tape & Reel data information.
©2000 Fairchild Semiconductor International
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is
not intended to be an exhaustive list of all such trademarks.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or
systems which, (a) are intended for surgical implant into
the body, or (b) support or sustain life, or (c) whose
failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be
reasonably expected to result in significant injury to the
user.
2. A critical component is any component of a life
support device or system whose failure to perform can
be reasonably expected to cause the failure of the life
support device or system, or to affect its safety or
effectiveness.
PRODUCT ST A TUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information
Preliminary
No Identification Needed
Obsolete
This datasheet contains the design specifications for
product development. Specifications may change in
any manner without notice.
This datasheet contains preliminary data, and
supplementary data will be published at a later date.
Fairchild Semiconductor reserves the right to make
changes at any time without notice in order to improve
design.
This datasheet contains final specifications. Fairchild
Semiconductor reserves the right to make changes at
any time without notice in order to improve design.
This datasheet contains specifications on a product
that has been discontinued by Fairchild semiconductor.
The datasheet is printed for reference information only.
Formative or
In Design
First Production
Full Production
Not In Production
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER
NOTICE TO ANY PRODUCTS HEREIN T O IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD
DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICA TION OR USE OF ANY PRODUCT
OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS P ATENT
RIGHTS, NOR THE RIGHTS OF OTHERS.
PowerTrench
QFET™
QS™
QT Optoelectronics™
Quiet Series™
SILENT SWITCHER
SMART ST ART™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
FASTr™
GlobalOptoisolator™
GTO™
HiSeC™
ISOPLANAR™
MICROWIRE™
OPTOLOGIC™
OPTOPLANAR™
PACMAN™
POP™
Rev . G
ACEx™
Bottomless™
CoolFET™
CROSSVOLT™
DOME™
E2CMOSTM
EnSignaTM
FACT™
F ACT Quiet Series™
FAST
SyncFET™
TinyLogic™
UHC™
VCX™
