Toggles Series CK High Security Keylocks Rockers General Specifications Electrical Capacity (Resistive Load) Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Installation Mounting Torque: Soldering Time & Temperature: Pushbuttons Programmable Illuminated PB Keylocks Rotaries Tactiles Slides Brass with nickel plating with ABS handle Brass with nickel plating for tubular key; brass with chrome plating for flat key Glass fiber reinforced PBT for CKM models; zinc alloy with chrome plating for CKL LCP (Liquid Crystal Polymer) Copper with silver plating Copper with silver plating Copper Silver Tilt Keys for CKM: Keys for CKL: Housing/Bushing: Base: Contact Terminals: Common Terminals: Movable Contactor: Movable Contacts: F -25C through +70C (-13F through +158F) 90 ~ 95% humidity for 240 hours @ 40C (104F) for CKM; 90 ~ 95% humidity for 96 hours @ 40C (104F) for CKL 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm for CKM or 0.7mm for CKL traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours 50G (490m/s2) acceleration for CKM; 30G (294m/s2) acceleration for CKL; (CKM & CKL tested in 6 right angled directions, with 5 shocks in each direction) 1.5 Nm (13.28 lb*in) maximum Manual Soldering: See Profile A in Supplement section. Touch Materials & Finishes 20 milliohms maximum 1,000 megohms minimum @ 500V DC 1,000V AC minimum between contacts for 1 minute minimum; 1,500V AC minimum between contacts & case for 1 minute minimum 30,000 cycles minimum 10,000 cycles minimum Withstands 15 kilovolts minimum ESD minimum (for CKM models only) 16mm Bushing (CKM models): .04 mNm (5.67 oz*in) for Flat Key .08 mNm (11.33 oz*in) for Tubular Key 19mm Bushing (CKL models): .05 mNm (7.08 oz*in) for Flat Key .07 mNm (9.91 oz*in) for Tubular Key Break-before-make 90 for 2-position & 45 for 3-position Indicators Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical Life: Electrical Life: Static Capability: Nominal Operating Torque: Contact Timing: Angle of Throw: Accessories Other Ratings 3A @ 250V AC Supplement Power Level: www.nkkswitches.com F3 Toggles Series CK Rockers Distinctive Characteristics Pushbuttons High insulating material for 16mm CKM models withstands over 15 kilovolts of electrostatic discharge, thus providing antistatic feature. Keylocks Programmable Illuminated PB Rugged, die cast housing 19mm CKL models designed for higher security requirements. Vertically rotating switching mechanism combines with self-cleaning sliding contacts for high reliability and long operating life. CKL and CKM on-off-on models with tubular keys have push-and-lock mechanism which allows contactor to drop and slide over stationary contacts. Available in both flat and tubular key styles; flat key is reversible for easier setting. Epoxy sealed terminals prevent entry of flux and other contaminants. Interior construction provides seal for contact area. High dielectric strength of 1,500 volts between contacts and case. Supplement Accessories Indicators Touch Tilt Slides F 16mm and 19mm diameter bushings available. Tactiles Rotaries High Security Keylocks F4 www.nkkswitches.com Actual Size CKM with Tubular Key Series CK Toggles High Security Keylocks 2A F W 01 Pushbuttons 1 Programmable Illuminated PB M Keys M 16mm Diameter L 19mm Diameter Poles 1 SPDT Terminals F Flat T Tubular Circuits & Key-Removable Positions Pos. 1 Pos. 2 Pos. 3 Key Removes 2A ON NONE ON Positions 1 and 3 2B ON NONE ON Position 1 3E ON OFF ON Position 2 Solder Lug F Contact Material W Silver Rated 3A @ 250V AC Tactiles Slides Code 01 Rotaries Bushings Keylocks CK Rockers TYPICAL SWITCH ORDERING EXAMPLE DESCRIPTION FOR TYPICAL ORDERING EXAMPLE Touch Tilt CKM12AFW01 Accessories Solder Lug Terminals 16mm Diameter Bushing Silver Contacts Rated 3A @ 250V AC Supplement SPDT ON-NONE-ON Circuit Key Removable in Positions 1 and 3 Indicators One key supplied with each switch www.nkkswitches.com F5 Series CK Toggles High Security Keylocks POLES, CIRCUITS & KEY-REMOVABLE POSITIONS Rockers Pushbuttons SPDT Pos 1 Pos 2 Pos 3 Pos 1 CKM12A CKL12A ON NONE ON COM-1 ON NONE ON Pos 2 COM-1 Pos 3 = Maximum Arc Schematic POS 1 ____ COM-2 COM 3 POS 1 ____ COM-2 1 2 3 COM Programmable Illuminated PB Keylocks Rotaries Model CKM12B CKL12B SPDT = Key Removable * = Not Removable (Terminal numbers are on switch) 2 CKM13E CKL13E SPDT ON OFF ON COM-1 OPEN COM-2 1 OP E N 3 POS 1 2 KEYS F F T Flat Key Tubular Key (must be pressed inward to actuate) AT4147 for CKM 16mm Brass with Nickel Plating key base & ABS key handle AT4153 for CKL 19mm Brass with Chrome Plating (crosshatch texture on handle) AT4146 for CKM 16mm Brass with Nickel Plating key base & ABS key handle AT4152 for CKL 19mm Brass with Nickel Plating (smooth) One key provided with each switch (no master key available) For ordering additional keys, indicate the same key number that is engraved on the face of your switch. One key provided with each switch (no master key available) For ordering additional keys, indicate the same key number that is engraved on the face of your switch. Randomly assigned key number (001 through 010 for CKM models & 001 through 025 for CKL models). Randomly assigned key number (001 through 025 for CKM models & 001 through 050 for CKL models). Typical Key Ordering Example: AT4146-001 Typical Key Ordering Example: AT4153-001 Tactiles Slides Connected Terminals Key Positions Pole & Throw (20.0) .787 AT4147 AT4146 (3.5) .138 Tilt (20.0) .787 (26.0) 1.024 AT4153 (3.5) .138 (22.3) .878 (40.8) 1.606 Touch (20.0) .787 (25.0) .984 (33.5) 1.319 (7.0) Dia .276 (10.5) Dia .413 (19.0) .748 (1.5) .059 (49.3) 1.941 (22.5) .886 (35.5) 1.398 (9.6) Dia .378 (1.8) .071 Indicators AT4152 Accessories CONTACT MATERIALS, RATINGS & TERMINALS W Supplement 01 F6 Silver over Silver Power Level 3A @ 250V AC Solder Lug Terminals Solder Lug Terminal for CKM Epoxy Seal (5.0) .197 (2.7) .106 (2.4) .094 (1.2) .047 Thk = (0.8) .031 www.nkkswitches.com (5.5) .217 Epoxy Seal Solder Lug Terminal for CKL (3.1) .122 (1.4) .055 Thk = (0.8) .031 (2.8) .110 Series CK Toggles High Security Keylocks TYPICAL SWITCH DIMENSIONS 90 (1.4) .055 (19.0) Dia .748 (20.0) .787 (24.0) .945 COM (4.0) .157 (16.0) .630 (5.0) .197 (35.2) 1.386 POS 1 45 45 0 2 (0.9) .035 (20.0) .787 (24.0) .945 (19.0) Dia .748 COM 002 2 POS 3 1 0 45 Angular Throw (14.2) .559 (1.2) x (2.4) .047 x .094 M16 P1 POS 2 Pushbuttons (0.9) .035 Programmable Illuminated PB (20.0) .787 (4.0) .157 (16.0) .630 (35.2) 1.386 (5.0) .197 (14.2) .559 F CKM12AFW01 16mm Bushing * Tubular Key POS 1 (11.0) .433 (1.2) x (2.4) .047 x .094 M16 P1 004 POS 3 COM (25.0) .984 (29.0) 1.142 (4.0) .157 (16.0) .630 (35.2) 1.386 (5.0) .197 POS 1 (1.2) x (2.4) .047 x .094 M16 P1 45 Tilt POS 2 (14.2) .559 017 2 POS 3 1 45 Tactiles (15.0) .591 (19.0) Dia .748 COM 017 (25.0) .984 (29.0) 1.142 (19.0) Dia .748 (4.0) .157 (16.0) .630 (35.2) 1.386 Touch 45 Angular Throw Slides 004 1 90 2 90 Angular Throw Rotaries Keylocks POS 3 006 006 2 90 Angular Throw 16mm Bushing * Flat Key Rockers (1.2) x (2.4) .047 x.094 M16 P1 1 POS 1 (5.0) .197 (14.2) .559 Indicators CKM13ETW01 Maximum Effective Panel Thickness: .469" (11.9mm) (14.6) .575 AT016 16mm Hex Mounting Nut for CKM 1 included with each switch Steel with nickel plating www.nkkswitches.com M16 P1 (2.5) .098 (19.0) .748 Supplement (16.0) Dia .630 Accessories PANEL CUTOUT & STANDARD HARDWARE FOR 16MM BUSHING F7 Series CK Toggles High Security Keylocks TYPICAL SWITCH DIMENSIONS Pushbuttons (0.7) .028 Programmable Illuminated PB (22.0) Dia .866 (29.8) 1.173 C (1.0) .039 (5.4) .213 (17.0) .669 POS 1 45 (5.5) .217 (40.0) 1.575 (16.8) .661 (1.4) x (2.8) .055 x .110 M19 P1 POS 2 OM 15 015 45 POS 3 2 45 Angular Throw 1 (22.3) POS 3 .878 C 1 Rockers 005 0 OM (0.7) .028 (20.0) .787 (29.8) 1.173 (22.0) Dia .866 F (5.4) .213 (17.0) .669 (5.5) .217 (40.0) 1.575 (16.8) .661 CKL12AFW01 19mm Bushing * Tubular Key POS 1 (19.0) .748 C (22.5) .886 (30.5) 1.201 (5.4) .213 (17.0) .669 (5.5) .217 (40.0) 1.575 POS 1 Tilt OM 008 (22.0) Dia .866 45 45 Angular Throw 1 POS 3 2 Slides 90 008 Tactiles (1.4) x (2.8) .055 x .110 M19 P1 90 Angular Throw (1.4) x (2.8) .055 x .110 M19 P1 POS 2 (16.8) .661 45 2 POS 3 C 1 Rotaries Keylocks (1.4) x (2.8) .055 x .110 M19 P1 90 2 90 Angular Throw POS 1 005 19mm Bushing * Flat Key OM Touch 042 CKL13ETW01 Indicators (22.5) .886 (30.5) 1.201 (22.0) Dia .866 (5.4) .213 (17.0) .669 (5.5) .217 (40.0) 1.575 (16.8) .661 PANEL CUTOUT & STANDARD HARDWARE FOR 19MM BUSHING Accessories (19.0) Dia .748 Supplement Maximum Effective Panel Thickness: .496" (12.6mm) (17.2) .677 F8 AT019 19mm Hex Mounting Nut for CKL 1 included with each switch Steel with nickel plating www.nkkswitches.com M19 P1 (3.4) .134 (22.0) .866