KBPC1000G/W - KBPC1010G/W W TE PO WE R SEM IC O ND UC TO R S 10A GLASS PASSIVATED BRIDGE RECTIFIER Features ! Glass Passivated Die Construction A ! ! ! Low Reverse Leakage Current Low Power Loss, High Efficiency Electrically Isolated Epoxy Case for Maximum Heat Dissipation Case to Terminal Isolation Voltage 2500V C ! A C G G ~ D + ~ - C ! ! ! ! - ~ D H Mechanical Data ! + C H ! ~ E Case: Epoxy Case with Heat Sink Internally Mounted in the Bridge Encapsulation Terminals: Plated Leads Solderable per MIL-STD-202, Method 208 Polarity: Symbols Marked on Case Mounting: Through Hole for #10 Screw Weight: KBPC-G 24 grams (approx.) KBPC-GW 21 grams (approx.) Marking: Type Number E B B Metal Heat Sink KBPC-G KBPC-GW KBPC-G "W" Suffix Designates Wire Leads No Suffix Designates Faston Terminals *All Models are Available on B(Height)=7.9mm Max. Epoxy Case Maximum Ratings and Electrical Characteristics Dim A B C D E G H KBPC-GW Min Max Min Max 28.40 28.70 28.40 28.70 10.97 11.23 10.97 11.23 15.70 16.70 17.10 19.10 17.50 18.50 10.90 11.90 22.86 25.40 30.50 -- Hole for #10 screw, 5.08O Nominal 6.35 Typical 0.97O 1.07O All Dimension in mm @TA=25C unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current @TA = 50C KBPC KBPC KBPC KBPC KBPC KBPC KBPC Unit 1000G/W 1001G/W 1002G/W 1004G/W 1006G/W 1008G/W 1010G/W VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IO 10 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IFSM 200 A Forward Voltage (per element) @IF = 5.0A VFM 1.1 V Peak Reverse Current @TC = 25C At Rated DC Blocking Voltage @TC = 125C IRM 5.0 500 A Typical Junction Capacitance (Note 1) Cj 300 pF Typical Thermal Resistance (Note 2) RJC 5.3 K/W RMS Isolation Voltage from Case to Lead VISO 2500 V Tj, TSTG -65 to +150 C Operating and Storage Temperature Range Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. 2. Thermal resistance junction to case per element mounted on heatsink. KBPC1000G/W - KBPC1010G/W 1 of 3 (c) 2002 Won-Top Electronics IF, INSTANTANEOUS FORWARD CURRENT (A) IF, AVERAGE FORWARD CURRENT (A) 20 Mounted on a 220 x 220 x 50 mm AL plate heatsink 15 10 5 Resistive or Inductive load 0 0 25 50 75 100 125 100 10 1.0 0.1 Tj = 25C Pulse Width = 300s 0.01 150 0 0.8 1.0 1.2 1.4 1.6 1.8 1000 Single Half-Sine Wave (JEDEC Method) f = 1 Mhz Tj = 25C 300 Cj, CAPACITANCE (pF) IFSM, PEAK FWD. SURGE CURRENT (A) 0.4 0.6 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics (per element) TA , AMBIENT TEMPERATURE (C) Fig. 1 Forward. Current Derating Curve 400 0.2 200 100 100 Tj = 150C 0 1 10 10 100 0.1 1.0 10 100 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Junction Capacitance (per element) IR, INSTANTANEOUS REVERSE CURRENT (A) NUMBER OF CYCLES AT 60 Hz Fig. 3 Max Non-Repetitive Surge Current 100 Tj = 125C 10 1.0 0.1 Tj = 25C 0.01 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 5 Typical Reverse Characteristics (per element) KBPC1000G/W - KBPC1010G/W 2 of 3 (c) 2002 Won-Top Electronics ORDERING INFORMATION Product No. Package Type Shipping Quantity KBPC1000G Square Bridge 50 Units/Box KBPC1000GW Square Bridge 50 Units/Box KBPC1001G Square Bridge 50 Units/Box KBPC1001GW Square Bridge 50 Units/Box KBPC1002G Square Bridge 50 Units/Box KBPC1002GW Square Bridge 50 Units/Box KBPC1004G Square Bridge 50 Units/Box KBPC1004GW Square Bridge 50 Units/Box KBPC1006G Square Bridge 50 Units/Box KBPC1006GW Square Bridge 50 Units/Box KBPC1008G Square Bridge 50 Units/Box KBPC1008GW Square Bridge 50 Units/Box KBPC1010G Square Bridge 50 Units/Box KBPC1010GW Square Bridge 50 Units/Box Shipping quantity given is for minimum packing quantity only. For minimum order quantity, please consult the Sales Department. Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to manufacturer. WTE reserves the right to change any or all information herein without further notice. WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life support devices or systems without the express written approval. Won-Top Electronics Co., Ltd. No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Taiwan Phone: 886-7-822-5408 or 886-7-822-5410 Fax: 886-7-822-5417 Email: sales@wontop.com Internet: http://www.wontop.com KBPC1000G/W - KBPC1010G/W We power your everyday. 3 of 3 (c) 2002 Won-Top Electronics