KBPC1000G/W – KBPC1010G/W 1 of 3 © 2002 Won-Top Electronics
KBPC1000G/W – KBPC1010G/W
10A GLASS PASSIVATED BRIDGE RECTIFIER
Features
! Glass Passivated Die Construction A A
! Low Reverse Leakage Current C C
! Low Power Loss, High Efficiency G G
! Electrically Isolated Epoxy Case for ~ ~ +
Maximum Heat Dissipation D + C C
! Case to Terminal Isolation Voltage 2500V - ~ - ~ D
H H
Mechanical Data E E
! Case: Epoxy Case with Heat Sink Internally B B
Mounted in the Bridge Encapsulation M etal Heat Sink
! Terminals: Plated Leads Solderable per KBPC-G KBPC-GW
MIL-STD- 202, Met hod 208
! Polarity: Symbols Marked on Case
! Mounting: Through Hole for #10 Screw
! Weight: KBPC-G 24 grams (approx.)
KBPC-GW 21 grams (approx.)
! Marking: Type Number
"W” Suffix Designates Wire Leads
No Suffix Designates Faston Terminals
*All Models are Available on B(Height)=7.9mm Max. Epoxy Case
Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derat e current by 20%.
Characteristic Symbol KBPC
1000G/W KBPC
1001G/W KBPC
1002G/W KBPC
1004G/W KBPC
1006G/W KBPC
1008G/W KBPC
1010G/W Unit
Peak Repetit i ve Revers e Voltage
Working Peak Reverse Voltage
DC Blocking Voltage
VRRM
VRWM
VR50 100 200 400 600 800 1000 V
RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
Average Rectified Output Current @TA = 50°C IO10 A
Non-Repetiti ve P eak Forward Surge Current
8.3ms Si ngl e half sine-wave superimposed
on rated load (JEDE C Method) IFSM 200 A
Forward Voltage (per element) @IF = 5.0A VFM 1.1 V
Peak Reverse Current @TC = 25°C
At Rated DC Blocki ng Voltage @TC = 125°C IRM 5.0
500 µA
Typic al Junction Capacitance (Note 1) Cj300 pF
Typic al Therm al Resis t ance (Not e 2) RJC 5.3 K/W
RMS Isolation Voltage from Case to Lead VISO 2500 V
Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C
Note: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
2. Thermal resistanc e juncti on to case per element mounted on heats ink.
WTE
PO WER SEM ICO NDUC TOR S
KBPC-G KBPC-GW
Dim Min Max Min Max
A28.40 28.70 28.40 28.70
B10.97 11.23 10.97 11.23
C15.70 16.70 17.10 19.10
D17.50 18.50 10.90 11.90
E22.86 25.40 30.50 —
G
Hole for #10 screw, 5.08Ø Nominal
H6.35 Typical 0.97Ø 1.07Ø
All Dimension in mm
0.01
0.1
1.0
10
100
0 0.4 0.8 1.0 1.6 1.80.60.2 1.2 1.4
I , INSTANTANEOUS FORWARD CURRENT (A)
F
V , INSTANTANEOUS FORWARD VOLTAGE (V)
Fig. 2 Typical Forward Characteristics (per element)
F
T = 25°C
j
Pulse Width = 300µs
0
100
200
300
400
1 10 100
I , PEAK FWD. SURGE CURRENT (A)
FSM
NUMBER OF CYCLES AT 60 Hz
Fig. 3 Max Non-Repetitive Surge Current
Single Half-Sine Wave
(JEDEC Method)
T = 150°C
j
10
100
1000
0.1 1.0 10 100
C , CAPACITANCE (pF)
j
V , REVERSE VOLTAGE (V)
Fig. 4 Typical Junction Capacitance (per element)
R
f=1Mhz
T = 25°C
j
0.01
0.1
1.0
10
100
4020 60 80 100 120 140
I , INSTANTANEOUS REVERSE CURRENT (µA)
R
PERCENT OF RATED PEAK REVERSE VOLTAGE (%)
Fig. 5 Typical Reverse Characteristics (per element)
T = 125°C
j
T = 25°C
j
0
5
10
15
20
0 25 50 75 100 125 150
I , AVERAGE FORWARD CURRENT (A)
F
T,AMBIENT TEMPERATURE(°C)
Fig. 1 Forward. Current Derating Curve
A
Resistive or
Inductive load
Mounted on a
220x220x50mm
AL plate heatsink
KBPC1000G/W – KBPC1010G/W 2 of 3 © 2002 Won-Top Electronics
KBPC1000G/W – KBPC1010G/W 3 of 3 © 2002 Won-Top Electronics
ORDERING INFORMATION
Product No. Package Type Shipping Quantity
KBPC1000G Square Bridge 50 Units/B ox
KBPC1000GW Square Bridge 50 Units/B ox
KBPC1001G Square Bridge 50 Units/B ox
KBPC1001GW Square Bridge 50 Units/B ox
KBPC1002G Square Bridge 50 Units/B ox
KBPC1002GW Square Bridge 50 Units/B ox
KBPC1004G Square Bridge 50 Units/B ox
KBPC1004GW Square Bridge 50 Units/B ox
KBPC1006G Square Bridge 50 Units/B ox
KBPC1006GW Square Bridge 50 Units/B ox
KBPC1008G Square Bridge 50 Units/B ox
KBPC1008GW Square Bridge 50 Units/B ox
KBPC1010G Square Bridge 50 Units/B ox
KBPC1010GW Square Bridge 50 Units/B ox
Shipping quantity given is for minimum packing quantity only. For minimum order
quantity, please consult the Sales Department.
Won-Top Electronics Co., Ltd (WTE) has checked all information carefully and believes it to be correct and accurate. However, WTE cannot assume any
responsibility for inaccuracies. Furthermore, this information does not give the purchaser of semiconductor devices any license under patent rights to
manufacturer. WTE reserves the right to change any or all information herein without further notice.
WARNING: DO NOT USE IN LIFE SUPPORT EQUIPMENT. WTE power semiconductor products are not authorized for use as critical components in life
support devices or systems without the express written approval.
We power your everyday.
Won-Top Electronics Co., Ltd.
No. 44 Yu Kang North 3rd Road, Chine Chen Dist., Kaohsiung, Tai wan
Phone: 886-7-822-5408 or 886-7-822-5410
Fax: 886-7-822-5417
Email: sales@wontop.com
Internet: http://www.wontop. com
