5063JD Series (spacemiser) Vishay Professional Leaded Resistors FEATURES * Professional resistors in small outlines * Low noise. APPLICATIONS * All general purpose applications. DESCRIPTION A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper are welded to the end-caps. The resistors are coated with lacquer which provides electrical, mechanical, and climatic protection. Four or five colour code rings designate the resistance value and tolerance according to IEC 60 062. The resistors are completely Lead (Pb)-free, the pure tin plating provides compatibility with Lead (Pb)-free and lead-containing soldering processes. Please note: The resistors have to be ordered and will be delivered as MBA 0204-50. The equivalence with 5063JD series (spacemiser) is ensured. TECHNICAL SPECIFICATIONS VALUE DESCRIPTION 5063JD CECC size A 1 to 10 M Resistance range 1% Resistance tolerance 50 ppm/K Temperature coefficient Operation mode long term standard Climatic category (LCT/UCT/days) 55/125/56 55/155/56 0.25 W 0.4 W Rated dissipation, P70 Operating voltage, Umax AC/DC 200 V Film temperature 125 C 155 C 1 000 h 0.25 % 0.5 % 8 000 h 0.5 % 1.0 % 225 000 h 1.5 % - 225 000 h 8 000 h Max. resistance change at P70 for resistance range, Specified lifetime Permissible voltage against ambient: 1 minute 300 V continuous 75 V Stability (R/R max.) after: load (1 000 hours) 0.25 % + 0.05 0.50 % + 0.05 climatic test 1.0 % + 0.05 resistance to soldering heat 0.25 % + 0.05 short time overload (400 V max.) 0.25 % + 0.05 For detailed specifications, please see datasheet MBA 0204 Professional Series. Document Number: 28753 Revision: 23-May-05 For technical questions contact: ff3cresistors@vishay.com www.vishay.com 1 5063JD Series (spacemiser) Vishay Professional Leaded Resistors DIMENSIONS L2 d JW34 D L1 DIMENSIONS - leaded resistor type and relevant physical dimensions L1 max (mm) 3.6 ODmax (mm) 1.6 TYPE 5063JD L2 max (mm) 29 Od (mm) 0.5 MECHANICAL DATA MOUNTING Mass per 100 units = 13 g The resistors are suitable for processing on automatic insertion equipment in addition to cutting and bending machines. The minimum bending is 5 mm (.200 inch). MARKING OUTLINES The nominal resistance and tolerance are marked on the resistor using four or five colored bands in accordance with IEC publication 60062 "Color codes for fixed resistors". The length of the body (L1) is measured by inserting the leads into holes of two identical gauge plates and moving these plates parallel to each other until the resistor body is clamped without deformation ("IEC publication 60294"). HISTORICAL PART NUMBER INFORMATION TC (X 10-6/K) TYPE 5063JD 50 TOL. (%) RESISTANCE RANGE PART NUMBER SPQ (units) - jumper(1) 5063JD0R000J12AF5 5 000; tape & reel - jumper(1) 5063JD0R000J18AF5 5 000; ammopack 1 1 to 10M 5063JDxxxxxF12AF5 5 000; tape & reel 1 1 to 10M 5063JDxxxxxF18AF5 5 000; ammopack Note 1. A 0 jumper is available with maximum resistance Rmax 10 m at 3 A. EXAMPLE HISTORICAL PART NUMBER The historical part number of a 5063JD resistor, value 5 600 1 %, taped on a bandolier of 5 000 units in tape on reel is: 5063JD5K600F12AF5. PART NUMBER AND PRODUCT DESCRIPTION Part Numbering: MBA02040C562RFCT M B A 0 2 0 4 0 C 5 6 2 0 F C T 0 0 Model SPECIAL CHARACTER TC VALUE TOLERANCE PACKAGING Special MBA 0204 0 = Neutral C = 50 ppm/K Z = Jumper 3 digit value 1 digit multiplier MULTIPLIER 7 = *10-3 8 = *10-2 9 = *10-1 0 = *100 1 = *101 2 = *102 3 = *103 4 = *104 5 = *105 6 = *106 F=1% CT = CT (5 000 pcs ammopack) RP = RP (5 000 pcs tape and reel) 00 = Standard Product Description: MBA 0204-50 1% 562R CT MBA0204 www.vishay.com 2 50 1.0 % 562R CT MODEL TC TOLERANCE RESISTANCE VALUE PACKAGING MBA 0204 50 ppm/K 1% 49K9 = 49.9 K 50R1 = 50.1 CT RP For technical questions contact: ff3cresistors@vishay.com Document Number: 28753 Revision: 23-May-05