Document Number: 28753 For technical questions contact: ff3cresistors@vishay.com www.vishay.com
Revision: 23-May-05 1
5063JD Series (spacemiser)
Vishay
Professional Leaded Resistors
FEATURES
•Professional resistors in small outlines
•Low noise.
APPLICATIONS
•All general purpose applications.
DESCRIPTION
A homogeneous film of metal alloy is deposited on a high
grade ceramic body. After a helical groove has been cut in
the resistive layer, tinned connecting wires of electrolytic
copper are welded to the end-caps. The resistors are coated
with lacquer which provides electrical, mechanical, and
climatic protection. Four or five colour code rings designate
the resistance value and tolerance according to IEC 60 062.
The resistors are completely Lead (Pb)-free, the pure tin
plating provides compatibility with Lead (Pb)-free and
lead-containing soldering processes.
Please note:
The resistors have to be ordered and will be delivered as
MBA 0204-50. The equivalence with 5063JD series
(spacemiser) is ensured.
For detailed specifications, please see datasheet MBA 0204 Professional Series.
TECHNICAL SPECIFICATIONS
DESCRIPTION VALUE
5063JD
CECC size A
Resistance range 1Ωto 10 MΩ
Resistance tolerance ± 1 %
Temperature coefficient ± 50 ppm/K
Operation mode long term standard
Climatic category (LCT/UCT/days) 55/125/56 55/155/56
Rated dissipation, P70 0.25 W 0.4 W
Operating voltage, Umax AC/DC 200 V
Film temperature 125 °C 155 °C
Max. resistance change at P70 for resistance range,
1 000 h ≤ 0.25 % ≤ 0.5 %
8 000 h ≤ 0.5 % ≤ 1.0 %
225 000 h ≤ 1.5 % −
Specified lifetime 225 000 h 8 000 h
Permissible voltage against ambient:
1 minute 300 V
continuous 75 V
Stability (∆R/R max.) after:
load (1 000 hours) ± 0.25 % + 0.05 Ω± 0.50 % + 0.05 Ω
climatic test ± 1.0 % + 0.05 Ω
resistance to soldering heat ± 0.25 % + 0.05 Ω
short time overload (400 V max.) ± 0.25 % + 0.05 Ω
www.vishay.com For technical questions contact: ff3cresistors@vishay.com Document Number: 28753
2Revision: 23-May-05
5063JD Series (spacemiser)
Vishay Professional Leaded Resistors
DIMENSIONS
∅D
JW34
L2
L1
∅d
DIMENSIONS - leaded resistor type and relevant physical dimensions
TYPE ØDmax
(mm)
L1 max
(mm)
L2 max
(mm)
Ød
(mm)
5063JD 1.6 3.6 29 0.5
MECHANICAL DATA
Mass per 100 units = 13 g
MARKING
The nominal resistance and tolerance are marked on the
resistor using four or five colored bands in accordance with
IEC publication 60062 “Color codes for fixed resistors”.
MOUNTING
The resistors are suitable for processing on automatic
insertion equipment in addition to cutting and bending
machines. The minimum bending is 5 mm (.200 inch).
OUTLINES
The length of the body (L1) is measured by inserting the
leads into holes of two identical gauge plates and moving
these plates parallel to each other until the resistor body is
clamped without deformation (“IEC publication 60294”).
Note
1. A 0 Ω jumper is available with maximum resistance Rmax ≤ 10 mΩ at 3 A.
EXAMPLE HISTORICAL PART NUMBER
The historical part number of a 5063JD resistor, value 5 600 Ω ± 1 %, taped on a bandolier of 5 000 units in tape on reel is:
5063JD5K600F12AF5.
HISTORICAL PART NUMBER INFORMATION
TYPE TC
(X 10-6/K)
TOL.
(%)
RESISTANCE
RANGE PART NUMBER SPQ
(units)
5063JD ± 50
- jumper(1) 5063JD0R000J12AF5 5 000; tape & reel
- jumper(1) 5063JD0R000J18AF5 5 000; ammopack
± 1 1 Ω to 10MΩ5063JDxxxxxF12AF5 5 000; tape & reel
± 1 1 Ω to 10MΩ5063JDxxxxxF18AF5 5 000; ammopack
PART NUMBER AND PRODUCT DESCRIPTION
Part Numbering: MBA02040C562RFCT
MBA02040C5620FCT00
Model SPECIAL CHARACTER TC VALUE TOLERANCE PACKAGING Special
MBA 0204 0 = Neutral C = ± 50 ppm/K
Z = Jumper
3 digit value
1 digit multiplier
MULTIPLIER
7 = *10-3
8 = *10-2
9 = *10-1
0 = *100
1 = *101
2 = *102
3 = *103
4 = *104
5 = *105
6 = *106
F = ± 1 % CT = CT 00 = Standard
(5 000 pcs
ammopack)
RP = RP
(5 000 pcs
tape and
reel)
Product Description: MBA 0204-50 1% 562R CT
MBA0204 50 1.0 % 562R CT
MODEL TC TOLERANCE RESISTANCE VALUE PACKAGING
MBA 0204 ± 50 ppm/K ± 1 % 49K9 = 49.9 KΩ
50R1 = 50.1 Ω
CT
RP
