Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 3
Table of Contents
OVERVIEW –
Inductive Proximity Sensors
Introduction........................................4
Operation............................................5
CYLINDRICAL
Inductive Proximity Sensors
Introduction/Operation.......................8
Selection Guide, DC styles................12
Selection Guide, AC styles................14
Product Specifications......................16
LIMIT STYLE
Inductive Proximity Sensors
Introduction/Operation.....................68
Selection Guide.................................71
Product Specifications......................72
BLOCK STYLE
Inductive Proximity Sensors
Introduction/Operation.....................80
Selection Guide.................................82
Product Specifications......................84
RING STYLE
Inductive Proximity Sensors
Introduction/Operation.....................98
Selection Guide...............................100
Product Specifications....................102
OTHER INFORMATION
APPENDIX:
IP Codes .........................................132
NEMA requirements.......................133
Cross Reference.............................134
Glossary..........................................135
Conversion Charts..........................137
INDEX.............................................138
TERMS & CONDITIONS .................141
WARRANTY....................................143
ACCESSORIES for
Inductive Proximity Sensors
Introduction....................................113
Mounting Brackets .........................114
Cable Assemblies............................116
Switching Units...............................122
Motion Detectors............................128
All specifications subject to change without notice or obligation
CLICK FOR PDF FILE
CLICK FOR PDF FILE
CLICK FOR PDF FILE
CLICK FOR PDF FILE
CLICK FOR PDF FILE
CLICK FOR PDF FILE
NEXT
FIND IT
80 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
Block Sensors
PREVIOUS
NEXT
FIND IT
Sensor Wiring Systems – A C, DC Block Style
AC 2-Wire
DC 3-Wire 4-Wire
Operating Current– A C, DC Block Style
A C 180 mA 500 mA
DC 5 mA 200 mA 400 mA
Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 81
BLOCK INDUCTIVE
PROXIMITY SENSORS
The Altech Inductive Pr oximity
Block Sensor family has a wide
selection of housings, with both
fixed and adjustable sensing range.
Units are available in DC, AC and
AC/DC operating voltages.
OUTPUTS NORMALLY OPEN (NO)
OR NORMALLY CLOSED (NC)
AC – NO, NC. DC– NO, NC
FLUSH MOUNT VS.
NON-FLUSH MOUNT
Block Sensors that are flush mount
and have electromagnetic fields
directly in fr ont of the sensing head
may be mounted directly into metal
without causing a false output. The
sensing head must be clear or any
non-target metal.
Block sensors that are Non-Flush
mount have electromagnetic fields
with a wide sensing angle. Therefore
care must be taken to ensur e that no
non-target metal comes in contact
with the sensing head.
See Figure 11 for mounting details.
OUTPUT CONNECTIONS
Block sensors are available in 2
meter fixed PVC output cables,
quick disconnect connector, or 1/2”
14NPT hole opening for wiring to a
terminal block. Please see selection
guide on pages 82-83 and the
product specification for mor e infor-
mation.
HOUSING MATERIAL
The following housing materials are
used for housings in the Block
Sensor family:
Aluminum
PBTP (GV -30)
Trogamid T
Aluminum/Trogamid T
Nickel Plated Brass
Sensing Distances – A C, DC, Block Sensor s
Type Voltage Flush* P artially Flush* Non-Flush*
Mini Block DC 1.5
Standard DC , AC 2 70
W eld Immune DC , AC 13 2 - 15
Analog DC 15 - 40
*All Sensing Distances in mm.
Operating Voltages – AC,DC Bloc k Style
A C 20 - 250 90 - 250
DC 10 - 30 18 - 30
Fig.11
BLOCK SENSOR INSTALLATION
PREVIOUS
NEXT
FIND IT
Series Size (mm) Sensing Distance (mm) Mounting Function
1.5 2.0 4.0 6.0 13 15 40 50 70 Adjustable PF FL NF NPN PNP NO NC
8 x 8 x 40 •••••
53 x 22 x 9.5 ••••
50 x 50 x 47 ••••••
80 x 80 x 40 •• •• •••
100 x 50 x 40 •• ••••
40 x 12 x 26 •• ••••••
34 x 34 x 80 ••••
80 x 80 x 40 •••
82 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
DC BLOCK SENSORS – SELECTION GUIDE
A C BLOCK SENSORS – SELECTION GUIDE
Mini Housing
10-30V, 200 mA
• LED on Connector Styles
• Sensing Head at end or center
Standard Series
10-30V, 200/400 mA
• Plastic and Metal Housing
• Large Sensing Distances
• Adjustable Sensing for
some models
Weld Immune
10-30V, 200 mA
• Protection from electro-
magnetic interference
• 2 LED's
Analog Sensors
10-30V, 5 mA
• Output distance proportional
to target distance
• Excellent linearity ±3%
• Determine target position
information
Series Size (mm) Sensing Distance (mm) Mounting Function Connection
2.0 4.0 13.0 20 40 50 PF FL NF NO NC Cable 62 Terminal Block
40 x 26 x 12 •••••
34 x 34 x 80 •••••
50 x 50 x 41 ••••
70 x 66 x 60 •••
80 x 80 x 40 •••• •
34 x 34 x 80 •••••
Standard Series
20-250V AC/ 90-250V
• Metal and Plastic Housing
• Large Sensing Distance
Weld Immune
20V-250V, 500 mA
• Protection from electro-
magnetic interference
PREVIOUS
NEXT
FIND IT
Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 83
No. of Housing No. of Page
Terminal Wires Material LED's
Cable 59 64 Block
•• 3 Brass, Nickel Plated 1 84
•3 Tragamid T 1 88
•• 3 Aluminum 1 88
•3 PBTP 2 91
•• 3 Aluminum 1 90
•••
3 Trogamid T 1 86
•3 PBTP 2 93
•3 PBTP 0 92
Connection
Quick Disconnect
2 Tragamid T 1 94
2 PBTP 2 94
2 Aluminum 2 95
2 Aluminum 1 95
2 PBTP 2 95
2 PBTP 2 96
* A third wire is used for ground on metal sensors
No. of
Wires* Housing
Construction No. of
LED's Page
PREVIOUS
NEXT
FIND IT
Fixed Cable
PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.)
cable length, change the last two
digits of the part number to 02. For
other cable lengths and/or PUR cable,
please consult Altech.
64 Style Connector
3-pin, Pico style, 8mm (.31 in.).
DC - 3 WIRE – MINI BLOCK
HOUSING
Brass,Nickel Plated (BN),
Block,10-30V,200mA
active surface at front or
centrally located
•IEC (529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Pr otection
•Short Circuit Protection for PNP types
•Overload Protection
•Reverse Polarity Protection
• Wire Br eak Resistance
• Temperature Range: -25 to 70°C (-13 to 158°F)
84 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
Note:Sensor dimensions in mm.
PNP
NPN
•Connector styles have
LED for output ener gized
• Carries mark
l 8
40
5
10
20
5
l 8
40
10
20
5
20
l 8
5
10
20
60
LED
4 PORT
l 8
10
20
20
60
LED
4 PORT
Flush Mount Flush Mount
Active Surface in Fr ont Active Surface Centered
Sensing Distance 1.5mm (.059 in.) 1.5mm (.059)
Cable or Connector Style Cat.No. Cable 64 Cable 64
Normally Open 9861-1000 9861-1064 9861-1100 9861-1164
Normally Closed
Normally Open
Normally Closed
Ripple V oltage ≤10% ≤10%
Voltage Range 10V - 30V 10V - 30V
Supply Current ≤9 mA ≤9 mA
Max.Load Current 200 mA 200 mA
Voltage Drop Across Sensor ≤1V ≤1V
Max.Leakage Currrent ≤10 µA ≤10 µA
Switching F requency 2000 Hz 2000 Hz
Hysterisis ≤15% ≤15%
Temperature Drift ≤10% ≤10%
Repeatability .15mm (.006 in.) .15mm (.006 in.)
PREVIOUS
NEXT
FIND IT
Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 85
Metric/in.Conversion Table
1.0 mm = .04 in.
5.0 mm = .19 in.
8.0 mm = .31 in.
10.0 mm = .39 in.
20.0 mm = .78 in.
40.0 mm = 1.57 in.
60.0 mm = 2.36 in. This table
converts millimeters
to inches in reference
to the illustrations
included on these
pages
Wiring Diagrams
Accessories
2 meter (6 ft.6 in.) DC Cab le Assemblies
for Quic k Disconnect Sensors
64 Connector 8000-5220 Straight
64 Connector 8000-5230 PVC, Right Angle, 2 LED, PNP
64 Connector 8000-5240 PVC, Right Angle, 2 LED, NPN
Change last digit of connector number to 5
for 5 meter cable
Refer to pages 116-121 for more cable information
LOAD
+
–
•
BR
BLK
BL
Normally Open
Fixed Cable
PNP
LOAD
2/4
+
–
1
3
BR
BK
BL•
Normally Open
64 Connector
Note: Wire colors ar e applicable on cable
purchased fr om Altech
PREVIOUS
NEXT
FIND IT
Fixed Cable
PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.)
cable length, change the last two
digits of the part number to 02. For
other cable lengths and/or PUR cable,
please consult Altech.
64 Style Connector
3-pin, Pico style, 8mm (.310 in.).
DC - 3 WIRE
PLASTIC BLOCK HOUSING
10-30V,400mA
LED for Output Ener gized
•IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Pr otection
•Short Circuit Protection
•Overload Protection
•Reverse Polarity Pr otection
• Wire Br eak Resistance
• Temperature Range: -25 to 70°C (-13 to 158°F)
86 Altech Corp ®• 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
Note:Sensor dimensions in m
PNP
NPN
•Block Sensor s feature large
sensing distances
•Carries mark
40 x 26 x 12mm Bloc k Flush Mount 40 x 26 x 12mm Block Non-Flush Mount
Sensing Distance 2mm (.08 in.) 4mm (.16 in.)
Cable or Connector Style Cat.No. Cable 64 Cable 64
Normally Open 9863-0400 9863-0464 9863-2700 9863-2764
Normally Closed 9863-2900 9863-2964
Normally Open 9863-2100 9863-2164
Normally Closed
Ripple V oltage ≤10% ≤10%
Voltage Range 10v - 30V 10v - 30V
Supply Current ≤18mA ≤18mA
Maximum Load Current 400 mA (n.o.) 200 mA (n.c.) 400 mA (n.o.) 200 mA (n.c.)
Voltage Drop Across Sensor ≤2.2V ≤2.2V
Maximum Leakage Current ≤10µA ≤10µA
Switching F requency 800Hz 800Hz
Hysterisis ≤15% ≤15%
Temperature Drift ≤10% ≤10%
Repeatability .20mm (.008 in.) .20mm (.008 in.)
Housing Material T rogamid T T rogamid T
40
12
26
3
40
12
26
3
M 8
LED
40
12
26
3
40
12
26
3
M 8
LED
PREVIOUS
NEXT
FIND IT
Altech Corp ®• 35 Royal Road • Flemington NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 87
Metric/in.Conversion Table
3.0 mm = .11 in.
8.0 mm = .31 in.
12.0 mm = .47 in.
26.0 mm = 1.02 in.
40.0 mm = 1.57 in. This table
converts millimeters
to inches in reference
to the illustrations
included on these
pages
Wiring Diagrams
Accessories
2 meter (6 ft.6 in.) DC Cab le Assemblies
for Quic k Disconnect Sensors
64 Connector 8000-5220 Straight
64 Connector 8000-5230 PVC, Right Angle, 2LED, PNP
64 Connector 8000-5240 PVC, Right Angle, 2LED, NPN
Change last digit of connector number to 5
for 5 meter cable
Refer to pages 116-121 f or more
cable inf ormation
LOAD
BR +
BK
BL
Fixed Cable
Normally Open
–
•
PNP NPN
LOAD
64 Connector
Normally Open
2/4
+
–
1
3
BR
BK
BL•
Note: Wire colors ar e applicable to cable
purchased fr om Altech
+
Normally Closed
–
LOAD
BR +
BK
BL
Normally
•
Fixed Cable
LOAD
64 Connector
Normally Closed
2/4
+
–
1
3
BR
BK
BL•
LOAD
BR +
BK
BL
Fixed Cable
Normally Open
–
•
LOAD
64 Connector
Normally Open
2/4
+
–
1
3
BR
BK
BL
•
PREVIOUS
NEXT
FIND IT
Fixed Cable
PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.)
cable length, change the last two
digits of the part number to 02. For
other cable lengths and/or PUR cable,
please consult Altech.
59 Style Connector
4-pin, Metal, 19mm (.75 in.) device.
* Also av ailable
in a 65 Style Connector
4-pin Micro style, 12mm (.47 in.).
Consult Altech.
DC - 3 WIRE – METAL &
PLASTIC BLOCK HOUSING
10-30V,400mA
LED for Output Ener gized
•IEC(529) IP67 (NEMA 1, 3, 4, 6, 12, 13) Pr otection
•Short Circuit Protection
•Overload Protection
•Reverse Polarity Pr otection
• Wire Br eak Resistance
• Temperature Range: -25 to 70°C (-13 to 158°F)
88 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
Note:Sensor dimensions in m
PNP
NPN
•Block Sensor s feature large
sensing distances
•Some models feature
adjustable sensing distance
•Carries mark
53 x 22 x 9.5mm Bloc k Flush Mount 50 x 50 x 47mm Block Flush Mount
Sensing Distance 6mm (.24 in.) Adjustable to 40mm (1.57 in.)
Cable or Connector Style Cat.No. Cable Cable 59 65
Normally Open 9864-0200 9807-0900 9807-0959 9807-0965
Normally Closed
Normally Open 9807-0100 9807-0159 9807-0165
Normally Closed
Ripple V oltage ≤10% ≤10%
Voltage Range 10v - 30V 10v - 30V
Supply Current ≤18mA ≤18mA
Maximum Load Current 400 mA 400 mA
Voltage Drop Across Sensor ≤2.4V ≤2.4V
Maximum Leakage Current ≤10µ ≤10µ
Switching F requency 100Hz 300Hz
Hysterisis ≤15% ≤15%
Temperature Drift ≤10% ≤10%
Repeatability .3mm (.012 in.) 2mm (.08 in.)
Housing Material T rogamid T Aluminum
LED
12
53
9,5
R 3
22
15
36
50
47
6,5
l 46
LED
15
36
50
47
6,5
l 46
LED
PREVIOUS
NEXT
FIND IT
Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 89
Metric/in.Conversion Table
3.0 mm = .11 in.
6.5 mm = .25 in.
9.5 mm = .37 in.
12.0 mm = .47 in.
15.0 mm = .59 in.
22.0 mm = .86 in.
36.0 mm = 1.41 in.
46.0 mm = 1.81 in.
47.0 mm = 1.85 in.
50.0 mm = 1.96 in.
53.0 mm = 2.08 in.
This table
converts millimeters
to inches in reference
to the illustrations
included on these
pages
Wiring Diagrams
Accessories
2 meter (6 ft.6 in.) DC Cab le Assemblies
for Quic k Disconnect Sensors
59 Connector 9512-0200 PVC, Straight
Change last digit of connector number to 2
for 5 meter cable
65 Connector 8000-5110 PVC, Straight
65 Connector 8000-5120 PVC, Right Angle
65 Connector 8000-5150 PVC, Right Angle, 2LED, NPN
65 Connector 8000-5160 PVC, Right Angle, 2LED, PNP
Change last digit of connector number to 5
for 5 meter cable
Refer to pages 116-121 f or more
cable inf ormation
Mounting Brackets – see P ages 114-115
LOAD
BR +
BK
BL
Fixed Cable
Normally Open
–
•
PNP NPN
LOAD
+
–
1
3
4
2
Normally Open
59 Connector
•
RED
BL
WHT
Note: Wire colors ar e applicable to cable
purchased fr om Altech
LOAD
BR +
BK
BL
Fixed Cable
Normally Open
–
•
LOAD
+
–
1
34
2
Normally Open
59 Connector
•
RED
BL
WHT
PREVIOUS
NEXT
FIND IT
90 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
DC - 3 WIRE METAL
BLOCK HOUSING
10-30V,400mA
Selection of operating frequency
allows units to be mounted adja-
cently without interference
Note:Sensor dimensions in mm.
Metric/in.Conversion Table
6.5 mm = .25 in.
7.5 mm = .29 in.
40mm = 1.57 in.
This table converts millimeters to inches in reference
to the illustrations included on these pages
50 mm = 1.96 in.
100 mm = 3.93 in.
•Block Sensor s feature large
sensing distances
•Some models feature
adjustable sensing distance
• LED f or Output Energized
•Carries mark
•IEC(529) IP67 (NEMA 1, 3, 4, 6, 12,
13) Protection
•Short Circuit Protection
•Overload Protection
•Reverse Polarity Pr otection
• Wire Br eak Resistance
• Temperature Range: -25 to 70°C
(-13 to 158°F)
* For operation where units will be
located adjacently, models with
different operating
frequencies must be selected
Wiring Diagrams
LOAD
BR +
BK
BL
Fixed Cable
Normally Open
–
•
PNP NPN
Note: Wire colors ar e applicable to cable
purchased fr om Altech
LOAD
BR +
BK
BL
Fixed Cable
Normally Open
–
•
Fixed Cable
PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.)
cable length, change the last two
digits of the part number to 02. For
other cable lengths and/or PUR cable,
please consult Altech.
59 Style Connector
4-pin, Metal, 19mm (.75 in.) device
* Also av ailable
in a 65 Style Connector
4-pin Micro style, 12mm (.47 in.).
Consult Altech.
PNP
NPN
LED
100
40
50
6,5
R 7,5
LED
100
40
50
6,5
R 7,5
LOAD
+
–
1
3
4
2
Normally Open
59 Connector
•
RED
BL
WHT
LOAD
+
–
1
34
2
Normally Open
59 Connector
•
RED
BL
WHT
Accessories
2 meter (6 ft.6 in.) DC Cab le Assemblies
for Quic k Disconnect Sensors
59 Connector 9512-0200 PVC Straight
Change last digit of connector number to 2
for 5 meter cable
Refer to pages 116-121 for more cable information
100 x 50 x 40mm Block Non-Flush Mount
Sensing Distance Adjustable to 70mm (2.76 in.)
Cable or Connector Style Cat.No. Cable 59
Normally Open 9809-0100 (f1)* 9809-0159 (f1)*
9809-3400 (f2)* 9809-3459 (f2)*
9809-3500 (f3)* 9809-3559 (f3)*
Normally Open 9809-0300 (f1)* 9809-0359 (f1)*
9809-0400 (f2)* 9809-0459 (f2)*
9809-0500 (f3)* 9809-0559 (f3)*
Ripple V oltage ≤10% ≤10%
V oltage Range 10V - 30V 10V - 30V
Supply Curent ≤12 mA ≤12 mA
Maximum Load Current 400 mA 400 mA
V oltage Drop Across Sensor ≤2.4V ≤2.4V
Maximum Leakage Current ≤10 µA ≤10 µA
Switching F requency 300Hz 300Hz
Hysterisis ≤15% ≤15%
Temperature Drift ≤10% ≤10%
Repeatability 7mm (.28 in.) 7mm (.028 in.)
Housing Material Aluminum Aluminum
LED One LED One LED
PREVIOUS
NEXT
FIND IT
Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 91
DC - 3 WIRE
PLASTIC BLOCK HOUSING
10-30V, 200mA
2 LEDs for Operating Voltage
and Output Energized
Note:Sensor dimensions in mm.
Metric/in.Conversion Table
11 mm = .43 in.
40 mm = 1.57 in
80 mm = 3.15 in.
This table converts millimeters to inches in reference
to the illustrations included on these pages
•Block Sensor s feature large
sensing distances
• Complementary Outputs
•Carries mark
•IEC(529) IP67 (NEMA 1, 3, 4, 6, 12,
13) Protection
•Short Circuit Protection
•Overload Protection
•Reverse Polarity Protection
• Wire Br eak Resistance
• Temperature Range: -25 to 70°C
(-13 to 158°F)
Wiring Diagrams
–
LOAD
+
••
LOAD
1
2(N.C.)
4(N.O.)
3
PNP
Note: Wire colors ar e applicable to cable
purchased fr om Altech
Screw Terminals
Screw terminals are located
internally in housing for wire
connections.
PNP
NPN
2 LED
40
11 80
80
(1/2"-14 NPT) Internal
thread with screw
terminals
80 x 80 x 40mm Bloc k
Flush Mount Non-Flush Mount
Sensing Distance 40mm (1.57 in.) 50mm (1.97 in.)
Cable or Connector Style Cat.No. Screw T erminals Screw T erminals
(Complementary NO/NC) 9865-1133 9865-1033
(Complementary NO/NC)
Ripple V oltage ≤10% ≤10%
V oltage Range 10V - 30V 10V - 30V
Supply Curent ≤22 mA ≤22 mA
Maximum Load Current 200 mA 200 mA
V oltage Drop Across Sensor ≤2.4V ≤2.4V
Maximum Leakage Current ≤10 µA ≤10 µA
Switching F requency 100Hz 300Hz
Hysterisis ≤10% ≤15%
Temperature Drift ≤10% ≤10%
Repeatability 2mm (.08 in.) 2.5mm (.10 in.)
Housing Material PBTP PBTP
LED T wo LEDs T wo LEDs
PREVIOUS
NEXT
FIND IT
92 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
DC ANALOG SENSORS
BLOCK SERIES
Plastic (PBTP) Housing
18 - 30V DC
Analog Output 1V - 9V Analog
Note:Sensor dimensions in mm.
Metric/in.Conversion Table
11.0 mm = .43 in.
40.0 mm = 1.57 in.
80.0 mm = 3.15 in.
This table converts millimeters to inches in reference
to the illustrations included on these pages
Wiring Diagrams
LOAD
+
–
•
1
2
3
Screw Terminals
Screw terminals are located
internally for wire connections.
•Output v oltage proportional to
target distance
•Ideal for determining position
information
• Excellent linearity ± 3%
• Carries mark
• IEC(529) IP67 (NEMA 1, 3, 4, 6,
12, 13) Protection
•Short Circuit Protection
•Overload Protection
•Temperature Range:
-25 to 70°C (-13 to 158°F)
40
11 80
80
(1/2"-14 NPT)
Internal Thread with
Screw Terminals
Additional Inf ormation
The Analog output voltage can be
digitized by means of the 8100-2100
Switching Unit and the Modules
8100-2400/-2500
80 x 80 x 40mm Block Non-Flush Mount
Sensing Distance 15mm (.59 in.) to 40mm (1.57 in.)
Cable or Connector Style Cat.No. Screw T erminals
9814-2133
V oltage Range 18V - 30V
Supply Current ≤10 mA
Maximum Load Current 5 mA
Maximum Switching F requency 20Hz
Temperature Drift ≤0.3V
Repeatability ≤1%
Output V oltage Range 1-9V DC
Housing Material PBTP
PREVIOUS
NEXT
FIND IT
Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 93
DC - 3 WIRE WELD IMMUNE
BLOCK,Plastic (PBTP)
10-30V, 200mA
2 LEDs for Operating
Voltage and Output Energized
Note:Sensor dimensions in mm.
Metric/in.Conversion Table
1.0 mm = .04 in.
5.3 mm = .21 in.
34.0 mm = 1.57 in
This table converts millimeters to inches in reference
to the illustrations included on these pages
66.0 mm = 2.6 in.
80.0 mm = 3.5 in.
•Circuitry that pr otects for
electroma gnetic interference
•Carries mark
•IEC(529) IP67 (NEMA 1, 3, 4, 6, 12,
13) Protection
•Short Circuit Protection
•Overload Protection
•Reverse Polarity Protection
• Wire Br eak Resistance
• Temperature Range: -25 to 70°C
(-13 to 158°F)
Wiring Diagrams
LOAD
BR +
BK
BL
Fixed Cable
Normally Open
–
•
Note: Wire colors ar e applicable to cable
purchased fr om Altech
Fixed Cable
PVC 2m (6 ft. 6 in.). Other
cable lengths available,
please consult Altech.
2 LED
5,3
80
l 34
66
PNP
NPN
34 x 34 x 80mm Bloc k
P artiall y Flush Mount
Sensing Distance 13mm (.51 in.)
Cable or Connector Style Cat.No. Cable Cable
Normally Open 9863-3800 9863-3900
Normally Closed
Normally Open
Normally Closed
Ripple V oltage ≤10% ≤10%
V oltage Range 10V - 30V 10V - 30V
Supply Current ≤18 mA ≤18 mA
Maximum Load Current 200 mA 200 mA
V oltage Drop Across Sensor ≤2.4V ≤2.4V
Maximum Leakage Current ≤10 µA ≤10 µA
Switching F requency 15Hz 15Hz
Hysterisis ≤15% ≤15%
Temperature Drift ≤10% ≤10%
Repeatability 1.3mm (.051 in.) 1.3mm (.051 in.)
Housing Material PBTP (GV 30) PBTP (GV 30)
Sensing Head P osition Front T op/Side Rotatable
LED T wo LEDs T wo LEDs
PREVIOUS
NEXT
FIND IT
Fixed Cable
PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.)
cable length, change the last two
digits of the part number to 02. For
other cable lengths and/or PUR cable,
please consult Altech.
62 Connector
3-Pin Mini Style, 25.4mm (1.0 in.).
Screw Terminals
Screw terminals are located
internally in housing for
wire connection.
A C - 2 WIRE BLOCK
METAL & PLASTIC HOUSING
Models include:
90-250V A C,180 mA,
20-250V A C,500mA
•IEC (529) IP67 (NEMA 1, 3, 4, 6,
12, 13) Protection
• Temperature Range:
-25 to 50°C (-13 to 122°F)
-25 to 70°C (-13 to 158°F)
94 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
•
One LED models f or Output
Energized
• T w o LED models for Operating
Voltage and Output Energized
•
Large sensing
distances
• Carries mark
40
12
26
3
2 LED
5,3
80
34
34
66
40 x 26 x 12mm Bloc k 34 x 34 x 80mm Block
Flush Mount P artiall y Flush Mount
Sensing Distance 2mm (.08 in.) 13mm (.51 in.)
Cable or Connector Style Cat.No. Cable Cable Cable
Normally Open 9853-2400 9853-3800 9853-3900
Normally Closed 9853-2500 9853-3600 9853-3700
Voltage Range 90V-250V AC 20V - 250V AC 20V - 250V
Operating F requency 50/60Hz 50/60Hz 50/60Hz
Supply Current ≤5 mA ≤2 mA ≤2 mA
Max.Load Current 180 mA 500 mA 500 mA
Voltage Drop Across Sensor ≤12V ≤5V ≤5V
Max.Leakage Currrent ≤3mA/230V ≤1.5mA/110V ≤2mA ≤2mA
Short Term Current (20 ms, 1Hz) 1A 8A 8A
Switching F requency 25Hz 15Hz 15Hz
Hysterisis ≤15% ≤15% ≤15%
Temperature Drift ≤10% ≤10% ≤10%
Repeatability .2mm (.008 in.) 1.3mm (.051 in.) 1.3mm (.051 in.)
Housing Material T r ogamid T PBTP (GV 30) PBTP (GV 30)
Sensing Head P osition - Active Surface in Front Active Surface on T op - Rotatable
PREVIOUS
NEXT
FIND IT
Wiring Diagrams
Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 95
LOAD
BR
BL
Fixed Cable
Normally Open
Note:Sensor dimensions in mm.
Metric/in.Conversion Table
3.0 mm = 0.1 in.
5.3 mm = 0.2 in.
6.5 mm = .25 in.
12.0 mm = .47 in.
24.0 mm = .94 in.
26.0 mm =1.02 in.
34.0 mm =1.33 in.
40.0 mm =1.57 in.
41.0 mm =1.61 in.
45.0 mm =1.77 in.
50.0 mm = 1.96 in.
60.0 mm = 2.36 in.
64.0 mm = 2.52 in.
66.0 mm = 2.59 in.
70.0 mm = 2.75 in.
80.0 mm = 3.15 in.
90.0 mm = 3.54 in.
110.0mm= 4.33 in.
This table
converts millimeters
to inches in reference
to the illustrations
included on these
pages
LOAD
BR
Fixed Cable
Normally Closed
BL
LOAD
BR
Fixed Cable 9803-3000
Normally Open
BL
Yellow/GRN
LOAD
1
2
Screw Terminal
LOAD
13
2
62 Connector
GR
BLK
WHT
Accessories
2 meter (6 ft.6 in.) A C Cable Assemblies
for Quic k Disconnect Sensors
62 Connector 8000-5030 PVC Straight
Change last digit of connector number to 5
for 5 meter cable
Refer to pages 116-121 for more cable information
Mounting Brackets – see P ages 114-115
Note: Wire colors ar e applicable to cable
purchased fr om Altech
2 LED
50
50
41
40
5,3
6,5
LED
l 64
60
24
45
70
90
110
2 LED
40
11 80
80
50 x 50 x 41mm Bloc k 70 x 66 x 60mm Block 80 x 80 x 40mm Block
Flush Mount Flush Mount Non-Flush Mount
20mm (.79 in.) 40mm (1.57 in.) 50mm (1.97 in.)
62 Cable Scrrew Terminals
9855-0062 9803-3000 9855-1000
9855-1100
20V - 250V 20V - 250V 20V - 250V
50/60Hz 50/60Hz 50/60Hz
≤2 mA ≤2 mA ≤2 mA
500 mA 500 mA 500 mA
≤5V ≤5V ≤5V
≤2 mA ≤2 mA ≤2 mA
8A 8A 8A
15Hz 25Hz 10Hz
≤15% ≤15% ≤15%
≤10% ≤10% ≤10%
2mm (.079 in.) 4mm (.157 in.) 5mm (.197 in.)
Aluminum Aluminum PBTP (GV 30)
---
PREVIOUS
NEXT
FIND IT
96 Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490
A C - 2 WIRE WELD IMMUNE
BLOCK,Plastic Housing
20-250V A C,500mA
2 LEDs for Operating
Voltage and Output Energized
Mounting Brackets – see P ages 114-115
Note:Sensor dimensions in mm.
Metric/in.Conversion Table
1.0 mm = .04 in.
5.3 mm = .21 in.
34.0 mm = 1.57 in
This table converts millimeters to inches in reference
to the illustrations included on these pages
66.0 mm = 2.6 in.
80.0 mm = 3.5 in.
•Circuitry that pr otects for
electroma gnetic interference
•Carries mark
Wiring Diagrams
LOAD
BR
Fixed Cable
Normally Open
BL
Note: Wire colors ar e applicable to cable
purchased fr om Altech
Fixed Cable
PVC 2m (6ft. 6in.). For 5m (16 ft. 5 in.)
cable length, change the last two
digits of the part number to 02. For
other cable lengths and/or PUR cable,
please consult Altech.
2 LED
5,3
80
l 34
66
Accessories
•IEC(529) IP67 (NEMA 1, 3, 4, 6, 12,
13) Protection
• Temperature Range: -25 to 70°C
(-13 to 158°F)
34 x 34 x 80mm Bloc k
P artially Flush Mount
Sensing Distance 13mm (.51 in.)
Cable or Connector Style Cat.No. Cable Cable
Normally Open 9853-3800 9853-3900
Normally Closed 9853-3600 9853-3700
V oltage Range 20V - 250V AC 20V - 250V AC
Operating F requency 50/60Hz 50/60Hz
Supply Current ≤2 mA ≤2 mA
Maximum Load Current 500 mA 500 mA
V oltage Drop Across Sensor ≤5V ≤5V
Maximum Leakage Current ≤2 mA ≤2 mA
Short Term Current (20 ms, 1Hz) 8A 8A
Switching F requency 15Hz 15Hz
Hysterisis ≤15% ≤15%
Temperature Drift ≤10% ≤10%
Repeatability .65mm (.026 in.) .65mm (.026 in.)
Housing Material PBTP (GV 30) PBTP (GV 30)
Sensing Head P osition Front T op/Side Rotatable
LOAD
BR
Fixed Cable
Normally Closed
BL
PREVIOUS
NEXT
FIND IT
Altech Corp.®• 35 Royal Road • Flemington, NJ 08822-6000 • Phone (908) 806-9400 • Fax (908) 806-9490 97
PREVIOUS
NEXT
FIND IT