TPS3836E18DBVRG4 - Texas Instruments

N/C(1)

VDD

GND

RESET

TPS3838DRV

2mmx2mmSON-6

(TOPVIEW)

GND

(TOPVIEW)

GND

VDD

RESET

TPS3836,TPS3838

DBVPACKAGE

(TOPVIEW)

GND

VDD

RESET

TPS3837

DBVPACKAGE

VDD

GND

RESET

TPS3836K33

VCC

VSS

RST

MSP430

Lithium

Battery

3.6V

TypicalApplicationCircuit

TPS3836

TPS3837

TPS3838

www.ti.com

SLVS292E –JUNE 2000–REVISED OCTOBER 2010

NanoPower Supervisory Circuits

Check for Samples: TPS3836,TPS3837,TPS3838

1FEATURES DESCRIPTION

23• Supply Current: 220 nA (typical) The TPS3836, TPS3837, and TPS3838 families of

supervisory circuits provide circuit initialization and

• Precision Supply Voltage Supervision Range: timing supervision, primarily for DSP and

1.8 V, 2.5 V, 3.0 V, and 3.3 V processor-based systems.

• Power-On Reset Generator With Selectable During power-on, RESET is asserted when the

Delay Time: 10 ms or 200 ms supply voltage VDD becomes higher than 1.1 V.

• Push/Pull RESET Output (TPS3836), Push/Pull Thereafter, the supervisory circuit monitors VDD and

RESET Output (TPS3837), or Open-Drain keeps the RESET output active as long as VDD

RESET Output (TPS3838) remains below the threshold voltage of VIT. An

• Manual Reset internal timer delays the return of the output to the

inactive state (high) to ensure proper system reset.

• SOT23-5 and 2x2 SON-6 Packages The delay time starts after VDD has risen above the

• Temperature Range: –40°C to +85°C threshold voltage VIT.

When CT is connected to GND, a fixed delay time of

APPLICATIONS typical 10 ms is asserted. When connected to VDD,

• Applications Using Low-Power DSPs, the delay time is typically 200 ms. When the supply

Microcontrollers, or Microprocessors voltage drops below the threshold voltage VIT, the

• Portable- and Battery-Powered Equipment output becomes active (low) again. All the devices of

• Intelligent Instruments this family have a fixed-sense threshold voltage (VIT)

• Wireless Communication Systems set by an internal voltage divider.

• Notebook Computers The TPS3836 has an active-low, push-pull RESET

• Automotive Systems output. The TPS3837 has an active-high, push-pull

RESET, and the TPS3838 integrates an active-low,

• Applications Using the MSP430™ open-drain RESET output. The product spectrum is

blank designed for supply voltages of 1.8 V, 2.5 V, 3.0 V,

blank and 3.3 V. The circuits are available in either a

SOT23-5 or 2x2 SON-6 package. The TPS3836,

TPS3837, and TPS3838 families are characterized

for operation over a temperature range of –40°C to

+85°C.

(1) N/C: Not connected.

1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas

Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2MSP430 is a trademark of Texas Instruments.

3All other trademarks are the property of their respective owners.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

TPS3836

TPS3837

TPS3838

SLVS292E –JUNE 2000–REVISED OCTOBER 2010

www.ti.com

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

Table 1. ORDERING INFORMATION(1)

PRODUCT NOMINAL SUPPLY VOLTAGE THRESHOLD VOLTAGE (VIT)(2)

TPS383xE18 1.8 V 1.71 V

TPS383xJ25 2.5 V 2.25 V

TPS383xH30 3.0 V 2.79 V

TPS383xL30 3.0 V 2.64 V

TPS383xK33 3.3 V 2.93 V

(1) For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com.

(2) Custom threshold voltages are available. Minimum order quantities apply. Contact factory for details and availability.

ABSOLUTE MAXIMUM RATINGS(1)

Over operating free-air temperature range, unless otherwise noted. TPS383xx UNIT

Supply voltage, VDD (2) 7 V

All other pins(2) (3) –0.3 to 7 V

Maximum low output current, IOL 5 mA

Maximum high output current, IOH –5 mA

Input clamp current, IIK (VI< 0 or VI> VDD) ±10 mA

Output clamp current, IOK (VO< 0 or VO> VDD) ±10 mA

Continuous total power dissipation See Dissipation Ratings Table

Operating temperature range, TA–40 to +85 °C

Storage temperature range, TSTG –65 to +150 °C

Soldering temperature +260 °C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings

only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating

Conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) All voltage values are with respect to GND.

(3) If RESET or RESET are pulled above VDD, the internal ESD structure will present an effective 1.5 kΩresistor between these pins,

causing leakage current to flow into the RESET or RESET pin.

DISSIPATION RATINGS TA< +25°C DERATING FACTOR TA= +70°C TA= +85°C

PACKAGE POWER RATING ABOVE TA= +25°C POWER RATING POWER RATING

DBV 437 mW 3.5 mW/°C 280 mW 227 mW

DRV Low-K(1) 715 mW 7.1 mW/°C 395 mW 285 mW

DRV High-K(2) 1540 mW 15.4 mW/°C 845 mW 615 mW

(1) The JEDEC low-K (1s) board used to derive this data was a 3in x 3in, two-layer board with 2-ounce copper traces on top of the board.

(2) The JEDEC high-K (2s2p) board used to derive this data was a 3in x 3in, multilayer board with 1-ounce internal power and ground

planes and 2-ounce copper traces on the top and bottom of the board.

Pull-up

50 μA

TPS3836

TPS3837

TPS3838

www.ti.com

SLVS292E –JUNE 2000–REVISED OCTOBER 2010

RECOMMENDED OPERATING CONDITIONS MIN MAX UNIT

Supply voltage, VDD 1.6 6 V

Voltage range, CT, MR, RESET, and RESET pins 0 VDD + 0.3 V

High-level input voltage, VIH 0.7 × VDD V

Low-level input voltage, VIL 0.3 × VDD V

Input transition rise and fall rate at MR, Δt/ΔV 100 ns/V

Operating temperature range, TA–40 +85 °C

Pull-up resistor value, RESET pin (TPS3838 only) Ω

ELECTRICAL CHARACTERISTICS

Over recommended operating conditions, unless otherwise noted.

PARAMETER TEST CONDITIONS MIN TYP MAX UNIT

RESET VDD = 3.3 V, IOH = –2 mA

(TPS3836) VDD = 6 V, IOH = –3 mA

VOH High-level output voltage 0.8 × VDD V

RESET VDD = 1.8 V, IOH = –1 mA

(TPS3837) VDD = 3.3 V, IOL = –2 mA

RESET VDD = 1.8 V, IOL = 1 mA

(TPS3836, VDD = 3.3 V, IOL = 2 mA

TPS3838)

VOL Low-level output voltage 0.4 V

RESET VDD = 3.3 V, IOL = 2 mA

(TPS3837) VDD = 6 V, IOL = 3 mA

TPS3836, VDD ≥1.1 V, IOL = 50 mA 0.2 V

TPS3838

Power-up reset voltage(1)

TPS3837 VDD ≥1.1 V, IOL = –50 mA 0.8 × VDD V

TPS383xE18 1.66 1.71 1.74

TPS383xJ25 2.18 2.25 2.29

Negative-going input threshold

VIT TPS383xH30 TA= –40°C to +85°C 2.70 2.79 2.85 V

voltage(2) TPS383xL30 2.56 2.64 2.69

TPS383xK33 2.84 2.93 2.99

1.7 V < VIT < 2.5 V 30

VHYS Hysteresis at VDD input 2.5 V < VIT < 3.5 V 40 mV

3.5 V < VIT < 5 V 50

MR (3) MR = 0.7 × VDD, VDD = 6 V –40 –60 –100 mA

IIH High-level input current CT CT = VDD = 6 V –25 +25 nA

MR (3) MR = 0 V, VDD = 6 V –130 –200 –340 mA

IIL Low-level input current CT CT = 0 V, VDD = 6 V –25 +25 nA

IOH High-level output current TPS3838 VDD = VIT + 0.2 V, VOH = VDD 25 nA

VDD > VIT, VDD < 3 V 220 400 nA

IDD Supply current VDD > VIT, VDD > 3 V 250 450

VDD < VIT 10 15 mA

Internal pull-up resistor at MR 30 kΩ

CIInput capacitance at MR and CT VI= 0 V to VDD 5 pF

(1) The lowest voltage at which the RESET output becomes active. tR, VDD ≥15 ms/V.

(2) To ensure best stability of the threshold voltage, a bypass capacitor (ceramic, 0.1 mF) should be placed near the supply terminal.

(3) If manual reset is unused, MR should be connected to VDD to minimize current consumption.

TPS3836

TPS3837

TPS3838

SLVS292E –JUNE 2000–REVISED OCTOBER 2010

www.ti.com

SWITCHING CHARACTERISTICS

At TA= +25°C, RL= 1 MΩ, and CL= 50 pF, unless otherwise noted.

PARAMETER TEST CONDITIONS MIN TYP MAX UNIT

VDD ≥VIT + 0.2 V, MR = 0.7 × VDD,5 10 15

CT = GND, (See Timing Diagram)

tDDelay time ms

VDD ≥VIT + 0.2 V, MR = 0.7 × VDD,100 200 300

CT = VDD, (See Timing Diagram)

VDD to RESET VIL = VIT – 0.2 V, VIH = VIT + 0.2 V 10

Propagation (delay) time,

tPHL delay (TPS3836, ms

high-to-low-level output VIL = 1.6 V 50

TPS3838)

VIL = VIT – 0.2 V, VIH = VIT + 0.2 V 10

Propagation (delay) time, VDD to RESET

tPLH ms

low-to-high-level output delay (TPS3837) VIL = 1.6 V 50

MR to RESET

Propagation (delay) time, VDD ≥VIT + 0.2 V, VIL = 0.3 × VDD, VIL

tPHL delay (TPS3836, 0.1 ms

high-to-low-level output = 0.7 × VDD

TPS3838)

Propagation (delay) time, MR to RESET VDD ≥VIT + 0.2 V, VIL = 0.3 × VDD,

tPLH 0.1 ms

low-to-high-level output delay (TPS3837) VIL = 0.7 × VDD

TIMING REQUIREMENTS

At TA= +25°C, RL= 1 MΩ, and CL= 50 pF, unless otherwise noted.

PARAMETER TEST CONDITIONS MIN TYP MAX UNIT

at VDD VIH = VIT + 0.2 V, VIL = VIT – 0.2 V 6

tWPulse width ms

at MR VDD ≥VIT + 0.2 V, VIL = 0.3 × VDD, VIH = 0.7 × VDD 1

RESET (TPS3837-Push-Pull)

Band-Gap

Reference

–

Refresh

Timer

Reset Logic

and Timer

VDD

GND

RESET (TPS3836-Push-Pull

TPS3838-Open-Drain)

TPS3836

TPS3837

TPS3838

www.ti.com

SLVS292E –JUNE 2000–REVISED OCTOBER 2010

FUNCTIONAL BLOCK DIAGRAM

FUNCTION TABLE

MR VDD > VIT RESET (1) RESET(2)

L 0 L H

L 1 L H

H 0 L H

H 1 H L

(1) TPS3836 and TPS3838.

(2) TPS3837.

RESET

VDD

VIT

<1.1V

A B C D E F G

Undefined

Output

Undefined

Output

VDD -SupplyVoltage -V

MR =Open

CT=GND

I SupplyCurrent

DD - - mA

T = 40 C

A- °

TA=0°C

TA=25°C

TA=85°C

0 2 4 6

V ManualResetVoltage V-

MR -

-500

-400

-300

-200

-100

-2 0 2 4 6

100

I ManualResetCurrent

MR - - mA

V =6V

CT=GND

T =25 C°

T =85 C

A°

T =0 C°

T = 40 C- °

TPS3836

TPS3837

TPS3838

SLVS292E –JUNE 2000–REVISED OCTOBER 2010

www.ti.com

TIMING DIAGRAM

TYPICAL CHARACTERISTICS

SUPPLY CURRENT MANUAL RESET CURRENT

vs vs

SUPPLY VOLTAGE MANUAL RESET VOLTAGE

Figure 1. Figure 2.

I Low-LevelOutputCurrent mA- -

0 1 2 3 4 5 6 7

0.5

1.0

1.5

2.0

V =2V

MR =OPEN

CT=GND

V Low-LevelOutputVoltage V

OL - -

T =25 C

A°

T = 40 C- °

T =85 C°

T =0 C°

0 1 2 3 4 5

0.5

1.0

1.5

2.0

I High-LevelOutputCurrent mA- -

V High-LevelOutputVoltage V

OH - -

V =2V

MR =OPEN

CT=GND

T =85 C

A°

T = 40 C- °

T =0 C°

T =25 C°

0.995

0.996

0.997

0.998

0.999

1.001

-40 -15 10 35 60 85

NormalizedResetThresholdVoltage V-

T Free-AirTemperature

A- - °C

1.000

CT=GND

MR =Open

0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0

MR =Open

CT=GND

T =+25 C

A°

V ThresholdOverdrive V- -

MinimumPulseDurationatV s

DD - m

TPS3836

TPS3837

TPS3838

www.ti.com

SLVS292E –JUNE 2000–REVISED OCTOBER 2010

TYPICAL CHARACTERISTICS (continued)

LOW-LEVEL OUTPUT VOLTAGE HIGH-LEVEL OUTPUT VOLTAGE

vs vs

LOW-LEVEL OUTPUT CURRENT HIGH-LEVEL OUTPUT CURRENT

Figure 3. Figure 4.

NORMALIZED RESET THRESHOLD VOLTAGE MINIMUM PULSE DURATION AT VDD

VS vs

FREE-AIR TEMPERATURE VDD THRESHOLD OVERDRIVE

Figure 5. Figure 6.

PACKAGE OPTION ADDENDUM

www.ti.com 28-Oct-2010

Addendum-Page 1

PACKAGING INFORMATION

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

TPS3836E18DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3836E18DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3836E18DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3836E18DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3836H30DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3836H30DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3836H30DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3836H30DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3836J25DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3836J25DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3836J25DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3836J25DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3836K33DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3836K33DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3836K33DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3836K33DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3836L30DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

PACKAGE OPTION ADDENDUM

www.ti.com 28-Oct-2010

Addendum-Page 2

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

TPS3836L30DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3836L30DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3836L30DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3837E18DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3837E18DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3837J25DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3837J25DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3837J25DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3837J25DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3837K33DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3837K33DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3837K33DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3837K33DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3837L30DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3837L30DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3837L30DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3837L30DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3838E18DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

PACKAGE OPTION ADDENDUM

www.ti.com 28-Oct-2010

Addendum-Page 3

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

TPS3838E18DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3838E18DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3838E18DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3838J25DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3838J25DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3838J25DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3838J25DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3838K33DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3838K33DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3838K33DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3838K33DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3838K33DRVR ACTIVE SON DRV 6 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3838K33DRVRG4 ACTIVE SON DRV 6 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

TPS3838K33DRVT ACTIVE SON DRV 6 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3838K33DRVTG4 ACTIVE SON DRV 6 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3838L30DBVR ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3838L30DBVRG4 ACTIVE SOT-23 DBV 5 3000 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Purchase Samples

TPS3838L30DBVT ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

PACKAGE OPTION ADDENDUM

www.ti.com 28-Oct-2010

Addendum-Page 4

Orderable Device Status (1) Package Type Package

Drawing Pins Package Qty Eco Plan (2) Lead/

Ball Finish MSL Peak Temp (3) Samples

(Requires Login)

TPS3838L30DBVTG4 ACTIVE SOT-23 DBV 5 250 Green (RoHS

& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Request Free Samples

(1) The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.

LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.

PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

OBSOLETE: TI has discontinued the production of the device.

(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability

information and additional product content details.

TBD: The Pb-Free/Green conversion plan has not been defined.

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that

lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.

Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between

the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.

Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight

in homogeneous material)

(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information

provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and

continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.

TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

OTHER QUALIFIED VERSIONS OF TPS3836E18, TPS3836H30, TPS3836J25, TPS3836K33, TPS3836L30, TPS3837E18, TPS3837J25, TPS3837K33, TPS3837L30,

TPS3838E18, TPS3838J25, TPS3838K33, TPS3838L30 :

•Automotive: TPS3836E18-Q1, TPS3836H30-Q1, TPS3836J25-Q1, TPS3836K33-Q1, TPS3836L30-Q1, TPS3837E18-Q1, TPS3837J25-Q1, TPS3837K33-Q1,

TPS3837L30-Q1, TPS3838E18-Q1, TPS3838J25-Q1, TPS3838K33-Q1, TPS3838L30-Q1

•Enhanced Product: TPS3836J25-EP, TPS3836L30-EP, TPS3837K33-EP

NOTE: Qualified Version Definitions:

PACKAGE OPTION ADDENDUM

www.ti.com 28-Oct-2010

Addendum-Page 5

•Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects

•Enhanced Product - Supports Defense, Aerospace and Medical Applications

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device Package

Type Package

Drawing Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

(mm) B0

(mm) K0

(mm) P1

(mm) W

(mm) Pin1

Quadrant

TPS3836E18DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3836E18DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3836H30DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3836H30DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3836J25DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3836J25DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3836K33DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3836K33DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3836L30DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3836L30DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3837E18DBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3

TPS3837E18DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3

TPS3837J25DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3837J25DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3837K33DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3837L30DBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3

TPS3837L30DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3837L30DBVT SOT-23 DBV 5 250 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

PACKAGE MATERIALS INFORMATION

www.ti.com 27-Aug-2012

Pack Materials-Page 1

Device Package

Type Package

Drawing Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

(mm) B0

(mm) K0

(mm) P1

(mm) W

(mm) Pin1

Quadrant

TPS3837L30DBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3

TPS3838E18DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3

TPS3838E18DBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3

TPS3838E18DBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3

TPS3838E18DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3

TPS3838J25DBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3

TPS3838J25DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3838J25DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3

TPS3838J25DBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3

TPS3838J25DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3

TPS3838K33DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3838K33DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3

TPS3838K33DBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3

TPS3838K33DBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3

TPS3838K33DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3

TPS3838K33DRVR SON DRV 6 3000 179.0 8.4 2.2 2.2 1.2 4.0 8.0 Q2

TPS3838K33DRVT SON DRV 6 250 179.0 8.4 2.2 2.2 1.2 4.0 8.0 Q2

TPS3838L30DBVR SOT-23 DBV 5 3000 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3

TPS3838L30DBVR SOT-23 DBV 5 3000 178.0 9.0 3.23 3.17 1.37 4.0 8.0 Q3

TPS3838L30DBVR SOT-23 DBV 5 3000 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3

TPS3838L30DBVT SOT-23 DBV 5 250 180.0 9.0 3.15 3.2 1.4 4.0 8.0 Q3

TPS3838L30DBVT SOT-23 DBV 5 250 179.0 8.4 3.2 3.2 1.4 4.0 8.0 Q3

PACKAGE MATERIALS INFORMATION

www.ti.com 27-Aug-2012

Pack Materials-Page 2

*All dimensions are nominal

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

TPS3836E18DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0

TPS3836E18DBVT SOT-23 DBV 5 250 180.0 180.0 18.0

TPS3836H30DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0

TPS3836H30DBVT SOT-23 DBV 5 250 180.0 180.0 18.0

TPS3836J25DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0

TPS3836J25DBVT SOT-23 DBV 5 250 180.0 180.0 18.0

TPS3836K33DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0

TPS3836K33DBVT SOT-23 DBV 5 250 180.0 180.0 18.0

TPS3836L30DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0

TPS3836L30DBVT SOT-23 DBV 5 250 180.0 180.0 18.0

TPS3837E18DBVT SOT-23 DBV 5 250 203.0 203.0 35.0

TPS3837E18DBVT SOT-23 DBV 5 250 182.0 182.0 20.0

TPS3837J25DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0

TPS3837J25DBVT SOT-23 DBV 5 250 180.0 180.0 18.0

TPS3837K33DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0

TPS3837L30DBVR SOT-23 DBV 5 3000 203.0 203.0 35.0

TPS3837L30DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0

TPS3837L30DBVT SOT-23 DBV 5 250 180.0 180.0 18.0

TPS3837L30DBVT SOT-23 DBV 5 250 203.0 203.0 35.0

TPS3838E18DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0

PACKAGE MATERIALS INFORMATION

www.ti.com 27-Aug-2012

Pack Materials-Page 3

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

TPS3838E18DBVR SOT-23 DBV 5 3000 203.0 203.0 35.0

TPS3838E18DBVT SOT-23 DBV 5 250 203.0 203.0 35.0

TPS3838E18DBVT SOT-23 DBV 5 250 182.0 182.0 20.0

TPS3838J25DBVR SOT-23 DBV 5 3000 203.0 203.0 35.0

TPS3838J25DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0

TPS3838J25DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0

TPS3838J25DBVT SOT-23 DBV 5 250 203.0 203.0 35.0

TPS3838J25DBVT SOT-23 DBV 5 250 182.0 182.0 20.0

TPS3838K33DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0

TPS3838K33DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0

TPS3838K33DBVR SOT-23 DBV 5 3000 203.0 203.0 35.0

TPS3838K33DBVT SOT-23 DBV 5 250 203.0 203.0 35.0

TPS3838K33DBVT SOT-23 DBV 5 250 182.0 182.0 20.0

TPS3838K33DRVR SON DRV 6 3000 203.0 203.0 35.0

TPS3838K33DRVT SON DRV 6 250 203.0 203.0 35.0

TPS3838L30DBVR SOT-23 DBV 5 3000 182.0 182.0 20.0

TPS3838L30DBVR SOT-23 DBV 5 3000 180.0 180.0 18.0

TPS3838L30DBVR SOT-23 DBV 5 3000 203.0 203.0 35.0

TPS3838L30DBVT SOT-23 DBV 5 250 182.0 182.0 20.0

TPS3838L30DBVT SOT-23 DBV 5 250 203.0 203.0 35.0

PACKAGE MATERIALS INFORMATION

www.ti.com 27-Aug-2012

Pack Materials-Page 4

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other

changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest

issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and

complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale

supplied at the time of order acknowledgment.

TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms

and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary

to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily

performed.

TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and

applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide

adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or

other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information

published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or

endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the

third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration

and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered

documentation. Information of third parties may be subject to additional restrictions.

Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service

voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.

TI is not responsible or liable for any such statements.

Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements

concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support

that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which

anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause

harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use

of any TI components in safety-critical applications.

In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to

help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and

requirements. Nonetheless, such components are subject to these terms.

No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties

have executed a special agreement specifically governing such use.

Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in

military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components

which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and

regulatory requirements in connection with such use.

TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which

have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such

components to meet such requirements.

Products Applications

Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive

Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications

Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers

DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps

DSP dsp.ti.com Energy and Lighting www.ti.com/energy

Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial

Interface interface.ti.com Medical www.ti.com/medical

Logic logic.ti.com Security www.ti.com/security

Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense

Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video

RFID www.ti-rfid.com

OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com

Wireless Connectivity www.ti.com/wirelessconnectivity

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265