36 Ohmite Mfg. Co. 1600 Golf Rd., Suite 850, Rolling Meadows, IL 60008 Tel. 1-866-9-OHMITE Fax 1-847-574-7522 www.ohmite.com info@ohmite.com
Ohmite Mfg. Co. 1600 Golf Rd., Suite 850, Rolling Meadows, IL 60008 • Tel. 1-866-9-OHMITE Fax 1-847-574-7522 www.ohmite.com info@ohmite.com 37
Resistor Mounting Hardware
For 200, 210, and 270 Series Resistors
MOUNTING BRACKETS
Brackets fit inside cores of 200, 210 and 270
type resistors and remain in place by spring ten-
sion. Standard brackets are plated steel and have
no suffix to part number. Spring steel brackets
are indicated with an “S” suffix following part
number.
WASHERS
THRU BOLTS
Thru-Bolts, with centering mica insulating wash-
ers, permit perpendicular mounting of 200, 210
and 270 type resistors to panels up to 0.25” thick.
ADJUSTABLE LUGS FOR 210 SERIES
One standard screwdriver type adjustable lug is
supplied with each unit.
Two types of lugs can be ordered separately:
standard or with a silver contact button; both
types are available with a screwdriver type lug.
Double thumb screw Lug
(Part Number 2160) The double thumb screw
adjustable lug permits easier adjustment and less
chance of damage to resistance wire. Available
for 1.125” cores only.
mica washer
E
.063"
1.588 mm
F
C
E
D
A
centering washer
F
C
E
H
Resistor length plus
.125" (3.175 mm)
G
mica washer
D
A
centering washer
B
Slotted type
Elongated type
Mounting
Brackets
Thru-bolts with
Centering and
Insulating Washers
Thru-bolts and
Mounting Brackets
Part number Mtg screw For resistors
Standard Spring steel size (max.) (power ratings)
5 5S 6 8, 12 watt
7 7S 6 20 watt
9 9S 6 25, 50, 75 watt
12 12S 10 100 watt
18 18S 10 175, 225 watt
Bolt size For resistors
Part No. Length No. (power rating)
7PA5 1.75” 8 8 watt
7PA10 2.5” 8 12 watt
7PA20 2.75” 8 20 watt
7PA25 2.75” 10 25 watt
7PA50 4.75” 10 50 watt
7PA75 6.75” 10 75 watt
7PA100 7.313” 10 100 watt
7PA160 9.5” 0.25” 175 watt
7PA200 11.5” 0.25” 225 watt
Metal Centering
Diameter For max. For resistors
Part No.* Outer Inner screw size (power ratings)
6000 0.563” 0.190 #10 25, 50, 75 watt
6001 0.75” 0.190 #10 100 watt
6003 1.125” 0.250 0.25” 175, 225 watt
Mica insulating
Diameter For resistors
Part No.* Outer Inner (power ratings)
6010 0.75” 0.063” 25, 50, 75 watt
6011† 0.75” 0.313” 25, 50, 75 watt
6012 1” 0.063” 100 watt
6013† 1” 0.5” 100 watt
6014 1.25” 0.063” core 1” O.D. x 0.625” I.D.
6015† 1.25” 0.625” core 1” O.D. x 0.625” I.D.
6016 1.5” 0.063” 175, 225 watt
6017† 1.5” 0.75” 175, 225 watt
† Use with centering washers.
Resistor core diam. Standard part numbers
(in. / mm) Standard Silver
0.313 / 7.94 2115 2116
0.563 / 14.3 2121 2123
0.750 / 19.05 2125 2127
1.125 / 28.58 2133 2135
THRU-BOLTS AND MOUNTING BRACKETS
Sturdy plated steel brackets, along with thru-bolts, centering washers and insu-
lating washers (included), allow for secure mounting of 210 type and 270 type
resistors. Mounting brackets are available in either slotted (one with end-slot/one
with side-slot) or elongated styles.
Type Dimensions
Slotted A B C D E F G H
6101— 0.781” 0.75” 0.031” 0.438” 0.25”
6104— 0.781” 0.75” 0.031” 0.438” 0.25”
6110— 1” 1.125” 0.063” 0.813” 0.313”
Elongated
6120— 1” 0.5” 0.031” 0.422” 0.219” .438 .750
6126— 1.5” 1.25” 0.063” 0.438” 0.281” .563 .875
6127— 1.5” 2” 1.25” 0.063” 0.438” 0.281” .563 .875
6128— 1.5” 2” 1.25” 0.063” 0.438” 0.281” .563 .875
6129— 1.5” 2” 1.25” 0.063” 0.438” 0.281” .563 .875
Part No. No. of resistors Resistor Resistor
Slotted Elongated per Bkt. Size Type
6120-D-1.75 1 12W 210/270
6101-2 6120-K-2 1 25W 210/270
6101-4 6120-K-4 1 50W 210/270
6101-6 1 75W 210
6104-6.5 1 100W 210/270
6110-8.5 6126-P-8.5 1 175W 210/270
6127-P-8.5 2 175W 210/270
6128-P-8.5 3 175W 210/270
6129-P-8.5 4 175W 210/270
6110-10.5 1 225W 210/270
= Most popular Standard
values
= Standard values
= Non-Standard values
subject to minimum
handling charge per
item
*** Some information duplicated from previous page ***