P6KE SERIES - S TRANSIENT VOLTAGE SUPPRESSOR V BR : 6.8 - 440 Volts P PK : 600 Watts D2 FEATURES : * * * * 600W surge capability at 1ms Excellent clamping capability Low zener impedance Fast response time : typically less then 1.0 ps from 0 volt to V BR(min.) * Typical I R less then 1A above 10V * Pb / RoHS Free 1.00 (25.4) MIN. 0.161 (4.10) 0.154 (3.90) 0.284 (7.20) 0.268 (6.84) 0.034 (0.86) 0.028 (0.71) 1.00 (25.4) MIN. MECHANICAL DATA * Case : D2 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method method 208 208 guaranteed guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.465 gram Dimensions in inches and ( millimeters ) DEVICES FOR BIPOLAR APPLICATIONS For Bi-directional use CS or CAS Suffix Electrical characteristics apply in both directions MAXIMUM RATINGS Rating at 25 C ambient temperature unless otherwise specified. Rating Peak Power Dissipation at Ta = 25 C, Tp=1ms (Note1) Symbol Value Unit PPK Minimum 600 W PD 5.0 W IFSM 100 A TJ, TSTG - 65 to + 175 C Steady State Power Dissipation at TL = 75 C Lead Lengths 0.375", (9.5mm) (Note 2) Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) (Note 3) Operating and Storage Temperature Range Note : (1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 C per Fig. 1 (2) Mounted on Copper Leaf area of 1.57 in2 (40mm2). (3) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minutes maximum. Page 1 of 4 Rev. 03 : March 25, 2005 ELECTRICAL CHARACTERISTICS Rating at 25 C ambient temperature unless otherwise specified Breakdown Voltage @ It ( Note 1 ) TYPE VBR (V) P6KE6.8S P6KE6.8AS P6KE7.5S P6KE7.5AS P6KE8.2S P6KE8.2AS P6KE9.1S P6KE9.1AS P6KE10S P6KE10AS P6KE11S P6KE11AS P6KE12S P6KE12AS P6KE13S P6KE13AS P6KE15S P6KE15AS P6KE16S P6KE16AS P6KE18S P6KE18AS P6KE20S P6KE20AS P6KE22S P6KE22AS P6KE24S P6KE24AS P6KE27S P6KE27AS P6KE30S P6KE30AS P6KE33S P6KE33AS P6KE36S P6KE36AS P6KE39S P6KE39AS P6KE43S P6KE43AS P6KE47S P6KE47AS P6KE51S P6KE51AS P6KE56S P6KE56AS Page 2 of 4 W orking Peak Reverse Maximum Reverse Leakage Maximum Reverse Maximum Clamping Maximum Temperature Voltage V RWM (V) @ V RWM IR (A) Current IRSM (A) Voltage @ I RSM V RSM (V) Co-efficient of V BR Min. Max. It (mA) 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 1000 1000 500 500 200 200 150 150 150 150 150 150 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 55.5 57.0 51.0 53.0 48.0 50.0 44.0 45.0 40.0 41.0 37.0 38.0 35.0 36.0 32.0 33.0 27.0 28.0 26.0 27.0 23.0 24.0 21.0 22.0 19.0 20.0 17.0 18.0 15.0 16.0 14.0 14.4 12.6 13.2 11.6 12.0 10.6 11.2 9.6 10.1 8.9 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 0.057 0.057 0.061 0.061 0.065 0.065 0.068 0.068 0.073 0.073 0.075 0.075 0.078 0.078 0.081 0.081 0.084 0.084 0.086 0.086 0.088 0.088 0.090 0.090 0.092 0.092 0.094 0.094 0.096 0.096 0.097 0.097 0.098 0.098 0.099 0.099 0.100 0.100 0.101 0.101 0.101 44.7 45.9 48.5 50.4 49.4 56.1 53.6 61.6 1.0 1.0 1.0 1.0 40.2 41.3 43.6 45.4 5.0 5.0 5.0 5.0 9.3 8.2 8.6 7.4 64.8 73.5 70.1 80.5 0.101 0.102 0.102 0.103 53.2 58.8 1.0 47.8 5.0 7.8 77.0 0.103 (% / C) Rev. 03 : March 25, 2005 ELECTRICAL CHARACTERISTICS Rating at 25 C ambient temperature unless otherwise specified Breakdown Voltage @ It ( Note 1 ) Min. Max. It (mA) W orking Peak Reverse Voltage VRWM (V) 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 198 209 225 237 270 285 315 332 360 380 396 418 68.2 65.1 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 242 231 275 263 330 315 385 368 440 420 484 462 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 106 111 121 128 130 136 138 145 146 154 162 171 175 185 202 214 243 256 284 300 324 342 356 376 TYPE VBR (V) P6KE62S P6KE62AS P6KE68S P6KE68AS P6KE75S P6KE75AS P6KE82S P6KE82AS P6KE91S P6KE91AS P6KE100S P6KE100AS P6KE110S P6KE110AS P6KE120S P6KE120AS P6KE130S P6KE130AS P6KE150S P6KE150AS P6KE160S P6KE160AS P6KE170S P6KE170AS P6KE180S P6KE180AS P6KE200S P6KE200AS P6KE220S P6KE220AS P6KE250S P6KE250AS P6KE300S P6KE300AS P6KE350S P6KE350AS P6KE400S P6KE400AS P6KE440S P6KE440AS Maximum Reverse Leakage @ V RWM IR (A) Maximum Reverse Current IRSM (A) Maximum Clamping Voltage @ IRSM VRSM (V) Maximum Temperature Co-efficient of V BR 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 6.8 7.1 6.1 6.5 5.5 5.8 5.1 5.3 4.5 4.8 4.2 4.4 3.8 4.0 3.5 3.6 3.2 3.3 2.8 2.9 2.6 2.7 2.5 2.6 2.3 2.4 2.1 2.2 1.75 1.83 1.67 1.75 1.40 1.45 1.20 1.25 1.05 1.10 0.95 1.00 89.0 85.0 98.0 92.0 108 103 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 344 328 360 344 430 414 504 482 574 548 631 602 0.104 0.104 0.104 0.104 0.105 0.105 0.105 0.105 0.106 0.106 0.106 0.106 0.107 0.107 0.107 0.107 0.107 0.107 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.108 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 0.110 (% / C) Note: ( 1 ) VBR measured after It applied for 300 s., It = square wave pulse or equivalent. ( 2 ) VF = 3.5 Vmax., IF = 50 Amps. ( 6.8 Volts thru 91 Volts ) VF = 5.0 Vmax., IF = 50 Amps. ( 100 Volts thru 440 Volts ) per 1/2 square or equivalent sine wave. PW = 8.3 ms, duty cycle = 4 pulses per minute maximum. ( 3 ) For Bipolar types moving VR of 10 Volts and under, the IR limit is doubled. Page 3 of 4 Rev. 03 : March 25, 2005 RATING AND CHARACTERISTIC CURVES ( P6KE SERIES - S ) FIG.2 - MAXIMUM NON-REPETITIVE SURGE CURRENT 120 120 PEAK FORWARD SURGE CURRENT, AMPERES PEAK PULSE DERATING IN % OF PEAK POWER OR CURRENT FIG.1 - PULSE DERATING CURVE 100 80 60 40 20 0 0 25 50 75 100 125 150 100 80 60 40 0 175 8.3 ms SINGLE HALF SINE WAVE JEDEC METHOD 20 1 2 Ta, AMBIENT TEMPERATURE, ( C) FIG.3 - STEADY STATE POWER DERATING 6 10 20 40 60 100 FIG.4 - PULSE RATING CURVE 100 5.00 Pp,PEAK POWER (kW) PD, STEADY STATE POWER DISSIPATION (WATTS) 4 NUMBER OF CYCLES AT 60Hz 3.75 2.50 1.25 Single Phase Half W ave 60 Hz Resistive or Inductive load 10 1.0 0.1 0.1s 1.0s 10s 100s 1.0ms 10ms 0 0 25 50 75 100 125 150 175 200 tp, PULSE W IDTH T L, LEAD TEMPERATURE (C) PEAK PULSE CURRENT - % I RMS FIG.5 - PULSE WAVEFORM Tr = 10s 100 Peak Value IRMS TJ =25 C Pulse W idth (tp) is defined as that point where the peak current decays to 50% of IRSM Half Value - IRMS 2 50 10X1000 Waveform as defined by R.E.A. tp 0 0 1.0 2.0 3.0 4.0 T, TIME(ms) Page 4 of 4 Rev. 03 : March 25, 2005