HA17458 Series Dual Operational Amplifier Description HA17458 is dual operational amplifiers which provides internal phase compensation and high performance. It can be applied widely to measuring control equipment and to general use. Features * * * * High voltage gain: 100dB (Typ) Wide output amplitude: 13V (Typ) [at RL 2k] Protected from output shortcircuit Internal phase compensation Ordering Information Type No. Application Package HA17485FP Industrial use FP-8D HA17458F Commercial use FP-8D HA17458 Commercial use DP-8 HA17458PS Industrial use DP-8 HA17458 Series Pin Arrangement Vout1 1 8 VCC 7 Vout2 Vin(-)1 2 1 Vin(+)1 3 - + 2 + - 6 Vin(-)2 5 Vin(+)2 VEE 4 (Top View) Circuit Schematic (1/2) VCC Vin(+) Vin(-) Vout to VEE to VCC to VCC VEE 2 HA17458 Series Absolute Maximum Ratings (Ta = 25C) Ratings Item Symbol HA17458 HA17458PS HA17458F HA17458FP Unit Supply voltage VCC +18 +18 +18 +18 V -18 -18 -18 -18 V 15 15 15 15 V VEE 3 Intput voltage VIN* Differential input voltage VIN(diff) 30 30 1 670* 30 1 385* 30 2 385* V 2 Power dissipation PT 670* mW Operating temperature Topr -20 to +75 -20 to +75 -20 to +75 -20 to +75 C Storage temperature Tstg -55 to +125 -55 to +125 -55 to +125 -55 to +125 C Notes: 1. These are the allowable values up to Ta = 45 C. Derate by 8.3mW/C above that temperature. 2. These are the allowable values up to Ta = 31 C mounting on 30% wiring density glass epoxy board. Derate by 7.14mW/C above that temperature. 3. If the supply voltage is less than 15V, input voltage should be less than supply voltage. 3 HA17458 Series Electrical Characteristics 1 (VCC = -VEE = 15V, Ta = 25C) Item Symbol Min Typ Max Unit Test conditions Input offset voltage VIO -- 2.0 6.0 mV RS 10k Input offset current I IO -- 6 200 nA Input bias current I IB -- 30 500 nA Line regulation VIO/VCC -- 30 150 V/V RS 10k VIO/VEE -- 30 150 V/V RS 10k Voltage gain AVD 86 100 -- dB RL 2k, Vout = 10V Common mode rejection ratio CMR 70 90 -- dB RS 10k Common mode input voltage range VCM 12 13 -- V Peak-to-peak output voltage Vop-p 12 14 -- V RL = 10k Power dissipation Pd -- 90 200 mW No load, 2 channel Slew rate SR -- 0.6 -- V/s AVD = 1 Input resistance Rin 0.3 1.0 -- M Input capacitance Cin -- 6.0 -- pF Output resistance Rout -- 75 -- Electrical Characteristics 2 (VCC = -VEE = 15V, Ta = -20 to +75C) Item Symbol Min Typ Max Unit Test conditions Input offset voltage VIO -- -- 9.0 mV RS 10k Input offset current I IO -- -- 400 nA Input bias current I IB -- -- 1100 nA Voltage gain AVD 80 -- -- dB RL 2k, Vout = 10V Peak-to-peak output voltage Vop-p 10 13 -- V RL = 2k 4 HA17458 Series Characteristic Curves Input Offset Voltage vs. Ambient Temperature Input Bias Current vs. Ambient Temperature 100 VCC = + 15 V VEE = -15 V RS < = 10 k 4 Input Bias Current IIB (nA) Input Offset Voltage VIO (mV) 5 3 2 1 0 -20 0 20 40 60 60 40 20 0 20 40 60 Ambient Temperature Ta (C) Ambient Temperature Ta (C) Input Offset Current vs. Ambient Temperature Power Dissipation vs. Ambient Temperature 200 VCC = + 15 V VEE = -15 V Power Dissipation Pd (mW) Input Offset Current IIO (nA) 80 0 -20 80 20 16 12 8 4 0 -20 VCC = + 15 V VEE = -15 V 0 20 40 60 Ambient Temperature Ta (C) 80 80 VCC = + 15 V VEE = -15 V No Load Both Amplifiers 100 0 -20 0 20 40 60 80 Ambient Temperature Ta (C) 5 HA17458 Series Output Short Current vs. Ambient Temperature Voltage Gain vs. Ambient Temperature 50 110 Output Short Current IOS (mA) VCC = + 15 V VEE = -15 V RL = 2 k 100 90 80 70 -20 0 20 40 60 Power Dissipation Pd (mW) 6 Source 20 Sink 10 0 20 40 60 Ambient Temperature Ta (C) Power Dissipation vs. Supply Voltage Maximum Output Voltage Swing vs. Supply Voltage Ta = 25C No Load Both Amplifiers 100 50 0 3 30 Ambient Temperature Ta (C) 200 150 VCC = + 15 V VEE = -15 V VOP-P = 0 V 40 0 -20 80 6 9 12 15 Supply Voltage VCC, VEE (V) 18 Maximum Output Voltage Swing VOP-P (V) Voltage Gain AVD (dB) 120 80 20 Ta = 25C RL = 2 k 16 12 +V 8 -P OP -V -P OP 4 0 3 6 9 12 15 Supply Voltage VCC, VEE (V) 18 HA17458 Series Voltage Gain vs. Frequency 120 VCC = +15 V VEE = -15 V Ta = 25C RL = 2 k Voltage Gain AVD (dB) 100 80 60 40 20 0 10 30 100 300 1k 3 k 10 k Frequency (Hz) 30 k 100 k 300 k 1M Phase Angle vs. Frequency VCC = +15 V VEE = -15 V Ta = 25C RL = 2 k 0 Phase Angle (deg) -40 -80 -120 -160 100 300 1k 3k 10 k 30 k Frequency (Hz) 100 k 300 k 1M 3M 7 HA17458 Series Maximum Output Voltage Swing Vop-p (V) 28 VCC = +15 V VEE = -15 V Ta = 25C RL = 10 k 24 20 16 12 8 4 0 100 500 1k 5k 10k 50k 100k Frequency f (Hz) Maximum Output Voltage Swing Vop-p (V) Maximum Output Voltage Swing vs. Frequency Maximum Output Voltage Swing vs. Load Resistance 16 12 8 VCC = +15 V VEE = -15 V Ta = 25C 4 0 -4 -8 -12 500k -16 200 500 1k 5k 10k Load Resistance RL () Voltage Follower Large Signal Pulse Response Input and Output Voltage (V) 10 Output VCC = +15 V VEE = -15 V RL = 2 k CL = 100 pF Ta = 25C 0 Input -10 0 8 20 40 60 Time (s) 80 HA17458 Series Package Dimensions Unit: mm 6.3 7.4 Max 9.6 10.6 Max 8 5 1 0.89 4 1.3 7.62 0.1 Min 2.54 Min 5.06 Max 1.27 Max + 0.10 0.25 - 0.05 0.48 0.10 2.54 0.25 0 - 15 Hitachi Code JEDEC EIAJ Mass (reference value) DP-8 Conforms Conforms 0.54 g Unit: mm 4.85 4.4 5.25 Max 5 8 1 0.75 Max *0.22 0.05 0.20 0.04 2.03 Max 4 0.25 6.50 +- 0.15 1.05 1.27 *0.42 0.08 0.40 0.06 0.10 0.10 0 - 8 0.25 0.60 +- 0.18 0.15 0.12 M *Dimension including the plating thickness Base material dimension Hitachi Code JEDEC EIAJ Mass (reference value) FP-8D -- Conforms 0.10 g 9 HA17458 Series Cautions 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Hitachi, Ltd. Semiconductor & Integrated Circuits. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: Tokyo (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica : http:semiconductor.hitachi.com/ Europe : http://www.hitachi-eu.com/hel/ecg Asia (Singapore) : http://www.has.hitachi.com.sg/grp3/sicd/index.htm Asia (Taiwan) : http://www.hitachi.com.tw/E/Product/SICD_Frame.htm Asia (HongKong) : http://www.hitachi.com.hk/eng/bo/grp3/index.htm Japan : http://www.hitachi.co.jp/Sicd/indx.htm For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive, San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe GmbH Electronic components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Hitachi Europe Ltd. Electronic Components Group. Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 778322 Hitachi Asia Pte. Ltd. 16 Collyer Quay #20-00 Hitachi Tower Singapore 049318 Tel: 535-2100 Fax: 535-1533 Hitachi Asia Ltd. Taipei Branch Office 3F, Hung Kuo Building. No.167, Tun-Hwa North Road, Taipei (105) Tel: <886> (2) 2718-3666 Fax: <886> (2) 2718-8180 Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower, World Finance Centre, Harbour City, Canton Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: <852> (2) 735 9218 Fax: <852> (2) 730 0281 Telex: 40815 HITEC HX Copyright ' Hitachi, Ltd., 1998. All rights reserved. Printed in Japan. 10