PCA9555D,118-CUT TAPE - NXP SEMICONDUCTORS

A78

1.27mm Pitch Connector

FX1 Series

DIN duplex density mount has been achieved.

(DIN 96 contacts and FX1 192 (96x2)

Photo 1

Sequence Structure

(Pin contact sequence)

Row B

Row A, row C

*FX1 Series (2 step sequence)

Figure 2

Setting row B to ground, if active cable insertion and

extraction are performed as power supply, arc will

occur between contact and contact. The row B

contact structure is constructed to separate arc

occurrence point a and normal contact point b, and

minimizes affects on the contact.

■Features

High density and space saved-DIN Duplex Mount Achieved

The alignment of the mating area in 4-row allows to duplex the

number of contacts in the nearly equivalent mount square as for

the conventional DIN connector.(Refer to photo (1).)

2. High Current and High Voltage

Two-thirds of total contact numbers are used for half pitch

signaling contact, while the other one-third thereof is used for the

power ground contact. Power ground contact corresponds to

high current (1A) and high voltage (250V).

3. Sequence Structure

Considering insertion/extraction in active power mode and

maintenance on the end user side, the FX1 series is designed in

a mechanism that can afford the time different contact at two

steps. (For details, refer to Figure (2) as shown on the right.)

4. Mis-insertion Prevent

Provide the insertion guide on both ends of connector, and widen

an inductive area in order to prevent mis-insertion.

C2 C1 B2 B1 A2 A1

24.4

13.69

1.8 2.5

2.82.2

(Effective contact length)

(Contact start position)

Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

A79

FX1 Series●1.27mm Pitch Connector

■Product Specifications

Rating

Current rating

Voltage rating

Signal Contact: 0.5A

Signal Contact: 125V AC

Operating Temperature Range-55 to 85ç(Note 1)

Storage Temperature Range -10 to +60ç(Note 2)

Power Supply Contact: 1A

Power Supply Contact: 250V AC

Operating Humidity Range -40 to 80%

Operating Humidity Range -40 to 70%(Note 2)

Item Specification Condition

1. Insulation Resistance 1000M ohms min. 250V DC

2. Withstanding Voltage No flashover or insulation breakdown. 1 minute Signal contact 300V AC

Power supply contact 600V AC

3. Contact Resistance 60m ohms max. (conductor resistance included) 100mA

4. Vibration No electrical discontinuity of 1μs or more

Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.

Humidity (Steady state)

Contact resistance: 70m ohms max.

96 hours at temperature of 40ç and humidity of 90% to 95%

Insulation resistance: 1000M ohms min.

6. Temperature Cycle Contact resistance: 70m ohms max.

(-55ç: 30 minutes→15- to 35ç: 5 minutes max.→

Insulation resistance: 1000M ohms min.

(-85ç: 30 minutes→15- to 35ç: 5 minutes max.) 5 cycles

Durability (Mating/un-mating)

Contact resistance: 70 m ohms max. 500 cycles

■Material

Contact

Prefixed pin

Insulator

Straight header

Right angle header

Receptacle

Header

Receptacle

Brass

Phosphor bronze

PPS

PPS/ PTB

Contact area:Tin plated

Lead area:Tin plated

Tin plated

Black

________

UL94V-0

Parts Material Finish Remarks

●FX1 Series

Note 1: Includes temperature rise caused by current flow.

Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and

Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for

a specific part number shown.

Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

A80

FX1 Series●1.27mm Pitch Connector

■Ordering Information

FX1 - 192 P - 1.27 DSA L

qewrty

rContact pitch: 1.27mm

tContact type:

DS : Right angle

DSA

Straight

yL: Board prefixed pin

qSeries Name : FX1

Number of contacts

: 144, 192, 216

eConnector type : P-header

: S-receptacle

●FX1 Series

Note: The cleaning type only is applied on the header side to FX1 series.

BApplication Pattern

Mar.1.2019Copyright2019HIROSEELECTRICCO.,LTD.AllRightsReserved.

A81

FX1 Series●1.27mm Pitch Connector

■Receptacle : Right Angle Type

BPCB mounting pattern Applicable board thickness t=1.6mm

FX1 Series

RoHS

YES

C D

Part Number CL No. BA

Number of Contacts

144

192

216

73.29

93.61

103.77

68.08

88.4

98.56

59.69

80.01

90.17

____

67.31

____

87.63

____

97.79

FX1-144S-1.27DS(71)

FX1-144S-1.27DSL(71)

FX1-192S-1.27DS(71)

FX1-192S-1.27DSL(71)

FX1-216S-1.27DS(71)

FX1-216S-1.27DSL(71)

571-0003-7-71

571-0053-5-71

571-0004-0-71

571-0054-8-71

571-0005-2-71

571-0055-0-71

Unit: mm

A82

FX1 Series●1.27mm Pitch Connector

■Header : Straight Type

BPCB mounting pattern Applicable board thickness t=1.6mm

CRoHS

Part Number CL No. BA

Number of Contacts

144

192

216

73.29

93.61

103.77

59.69

80.01

90.17

____

69.85

____

90.17

____

100.33

YES

FX1-144P-1.27DSA(71)

FX1-144P-1.27DSAL(71)

FX1-192P-1.27DSA(71)

FX1-192P-1.27DSAL(71)

FX1-216P-1.27DSA(71)

FX1-216P-1.27DSAL(71)

571-0303-0-71

571-0353-9-71

571-0304-3-71

571-0354-1-71

571-0305-6-71

571-0355-4-71

Unit: mm

A83

FX1 Series●1.27mm Pitch Connector

■Header : Right Angle Type

BPCB mounting pattern Applicable board thickness t=1.6mm

RoHS

YES

Part Number CL No.

Number of Contacts

144

FX1-144P-1.27DS(71)

FX1-144P-1.27DSL(71) 571-0203-6-71

571-0253-4-71

A84

FX1 Series●1.27mm Pitch Connector

BPrecautions

1. Soldering

(1)In the case of manual soldering, complete services under the condition of soldering iron bit temperature below 360çfor

5 seconds max. Please be sure to coat the contacts with solder so that no force is given.

(2)In the case of dip soldering bath, complete service under the condition of soldering iron bit temperature below 260çfor

10 seconds max.

2. Prefixed function

If the prefixed function is required, please use to the board prefixed pin type.