CD42__60B CD47__60B POW-R-BLOKTM Dual SCR/Diode Isolated Module 60 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Description: OUTLINE DRAWING Powerex SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. A C F G H 3 B 45 67 2 1 T J K "U" THREAD "S" FASTON TAB L D M P Q N 4 5 1 2 ~ 3 Electrically Isolated Heatsinking DBC Alumina (Al2O3) Insulator Copper Baseplate Low Thermal Impedance for Improved Current Capability UL Recognized (E78240) CD42 6 7 2 ~ Features: - + 1 CD42__60B, CD47__60B Dual SCR/Diode Isolated POW-R-BLOKTM Module 60 Amperes / Up to 1800 Volts 3 - + CD47 Benefits: CONNECTION DIAGRAM CD42, CD47 Outline Dimensions Dimension Inches Millimeters A 3.66 93 B 0.79 20 C 3.15 80 D 1.18 30 F 0.61 15.5 G 0.79 20 H 0.79 20 J 0.16 4 K 0.22 5.7 L 0.59 15 M 1.10 28 N 0.31 8 P 0.94 24 Q 1.16 29.4 S 0.11 x .03 2.8 x 0.8 T 0.25 6.4 U M5 M5 Ordering Information: Select the complete nine digit module part number from the table below. Example: CD421660B is a 1600Volt, 60 Ampere Dual SCR/Diode Isolated TM POW-R-BLOK Module No Additional Insulation Components Required Easy Installation No Clamping Components Required Reduce Engineering Time Applications: Type CD42 CD47 Voltage Current Volts Amperes (x100) 08 12 14 16 18 60 Version B Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders Note: Dimensions are for reference only. Revision Date: 04/28/2009 http://store.iiic.cc/ CD42__60B CD47__60B Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOKTM Dual SCR/Diode Isolated Module 60 Amperes / Up to 1800 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1800 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V 180 Conduction, TC=70C IT(RMS) 110 A RMS Forward Current Average Forward Current Peak One Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle, 8.3 milliseconds 180 Conduction, TC=70C IT(AV) 70 A 60 Hz, 100% VRRM reapplied, Tj=125C ITSM 1,470 A 60 Hz, No VRRM reapplied, Tj=125C ITSM 1,740 A 60 Hz, No VRRM reapplied, Tj=25C ITSM 1,940 A 50 Hz, 100% VRRM reapplied, Tj=125C ITSM 1,400 A 50 Hz, No VRRM reapplied, Tj=125C ITSM 1,665 A 50 Hz, No VRRM reapplied, Tj=25C ITSM 1,850 A 8.3 ms, 100% VRRM reapplied, Tj=125C It 2 8,960 A sec 8.3 ms, No VRRM reapplied, Tj=125C 2 It 12,560 A sec 8.3 ms, No VRRM reapplied, Tj=25C It 2 15,600 A sec 10 ms, 100% VRRM reapplied, Tj=125C It 2 9,800 A sec 10 ms, No VRRM reapplied, Tj=125C It 2 13,860 A sec 2 It 17,110 A sec di/dt 150 A/s TJ -40 to +125 C Tstg -40 to +125 C 25 3 44 5 95 in.-Lb. Nm in.-Lb. Nm g 3.35 oz. 3000 3500 V V 10 ms, No VRRM reapplied, Tj=25C Maximum Rate-of-Rise of On-State Current, (Non-Repetitive) Operating Temperature Tj=125C Storage Temperature Max. Mounting Torque, M5 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C Circuit to base, all terminals shorted together 50 - 60 Hz, 1 minute 50 - 60 Hz, 1 second Vrms Vrms 2 2 2 2 2 2 Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. Revision Date: 04/28/2009 http://store.iiic.cc/ CD42__60B CD47__60B POW-R-BLOKTM Dual SCR/Diode Isolated Module 60 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Electrical Characteristics, TJ=25C unless otherwise specified Characteristics Repetitive Peak Forward Leakage Current Repetitive Peak Reverse Leakage Current Symbol Test Conditions IDRM Up to 1800V, TJ=125C Min. Max. Units 20 mA IRRM Up to 1800V, TJ=125C 20 mA V TM / VFM ITM / IFM =300A 1.9 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125C, I = 16.7% x IT(AV) to IT(AV) 0.9 3.5 V m Minimum dV/dt dV/dt Tj=125C, Up to 800V Tj=125C, 1200V - 800V 1000 TJ = 25C 40 - 100 Peak On-State Voltage Turn-Off Time (Typical) t off 500 V/s (Typical) s Gate Trigger Current IGT Tj= 25C, VD=6V, Resistive Load 150 mA Gate Trigger Voltage VGT Tj= 25C, VD=6V, Resistive Load 3.0 Volts Non-Triggering Gate Voltage VGDM Tj=125C, VD=VDRM 0.25 Volts Non-Triggering Gate Current IGDM Tj=125C, VD=VDRM 6 mA Holding Current IH Tj= 25C 150 mA Latching Current IL Tj= 25C 300 mA Thermal Characteristics Characteristics Symbol Max. Units Thermal Resistance, Junction to Case DC Operation RJ-C Per Module, both conducting Per Junction, both conducting 0.18 0.35 C/W C/W Thermal Resistance, Case to Sink Lubricated RC-S Per Module 0.1 C/W Revision Date: 04/28/2009 http://store.iiic.cc/ CD42__60B CD47__60B POW-R-BLOKTM Dual SCR/Diode Isolated Module 60 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Maximum On-State Forward Voltage Drop Maximum Transient Thermal Impedance (Junction to Case) 4 0.40 3.5 0.35 Thermal Impedance - Rjc - C/W On-State Voltage - Vtm/Vfm - Volts ( Tj = 125 C ) 3 2.5 2 1.5 1 0.30 0.25 0.20 0.15 0.10 0.05 0.5 0.00 0.001 0 10 100 1000 0.01 0.1 Maximum On-State Power Dissipation 100 (Sinusoidal Waveform) 80 125 120 70 180 90 60 Max. Case Temperature - Tcase -C Max. Power Dissipation Per Junction - Watts 10 Maximum Allowable Case Temperature (Sinusoidal Waveform) 60 50 30 40 30 180 0 20 360 CONDUCTION ANGLE 10 120 115 180 0 110 105 100 180 30 60 90 120 95 0 5 10 15 20 25 30 35 40 45 50 55 360 CONDUCTION ANGLE 0 0 60 5 10 15 20 25 30 35 40 45 50 55 60 Average On-State Current - It/If(av) - Amperes Average On-State Current - It/If(av) - Amperes Maximum Allowable Case Temperature Maximum On-State Power Dissipation (Rectangular Waveform) (Rectangular Waveform) 125 120 360 100 120 Max. Case Temperature - Tcase -C Max. Power Dissipation Per Junction - Watts 1 Time - t - Seconds Instantaneous On-State Current - Itm/Ifm - Amperes 270 180 80 120 60 60 15 90 30 40 20 180 0 360 115 180 0 360 CONDUCTION ANGLE 110 105 100 30 95 60 90 120 360 180 90 CONDUCTION ANGLE 270 85 0 0 10 20 30 40 50 60 70 80 90 100 Average On-State Current - It/Ifav) - Amperes 0 10 20 30 40 50 60 70 80 90 100 Average On-State Current - It/If(av) - Amperes Revision Date: 04/28/2009 http://store.iiic.cc/