Keysight Technologies DSO1000A/B Series Portable Oscilloscopes Data Sheet Engineered to give you more scope than you thought you could afford 02 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet More scope than you thought you could afford Keysight Technologies, Inc. 1000 Series oscilloscopes deliver the performance and features you expect in a big scope - and the portability and low price you require in a small one. We've redeined the economy scope by giving you powerful signal capture and display, advanced measurement capabilities and accelerated productivity. 2-channel models 4-channel models DSO1052B 50 MHz DSO1004A 60 MHz DSO1072B 70 MHz DSO1014A 100 MHz DSO1102B 100 MHz DSO1024A 200 MHz DSO1152B 150 MHz DSO1022A 200 MHz Weighing less than 7 pounds with a small footprint, the 1000 Series can go anywhere with ease. Whether your job is designing products in R&D, teaching the next generation in education, or testing in manufacturing or service, the new 1000 Series oscilloscopes can help get it done with conidence. R&D Figure 1. Features normally only found on much higher priced scopes equip the 1000 Series to be a powerful choice for R&D applications. Education Figure 2. Economical prices make the 1000 Series ideal for teaching basic scientiic and engineering measurements at lab stations in schools and universities. For more information, visit www.keysight.com/find/DSO1000 Manufacturing Figure 3. Standard go/no-go mask testing is just one of the reasons manufacturing and service test demand 1000 Series solutions. 03 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet Powerful signal capture and display - - - - - Wide viewing angle, bright color display Up to 20 kpts memory, up to 8x more than other scope Up to 2 GSa/s sample rate Simultaneous viewing of main and zoomed waveforms 25% more viewing area with menus switched off Capture long time periods with high resolution 1000A Series models provide up to 20 kpts and 1000B models provide up to 16 kpts of acquisition memory standard. The scope will maintain high-resolutionacquisitions even at slower timebase settings so you can see the details on your signals. Figure 4. The bright, crisp display on the 1000 Series oscilloscope and its wide viewing angle let you quickly identify your signal activity. See your signals more clearly Every 1000 Series scope incorporates a bright, crisp LCD color display (300 cd/m2). You can quickly view your signal from almost any angle. Unlike conventional scopes that always require menus to be on, the entire 5.7-inch diagonal screen is available for full waveform display as needed. Simultaneous viewing of main and zoomed waveforms Dual display shows your entire signal and zoomed in waveform details at the same time. Figure 5. Turning off the menu gives almost 25% more viewing area for your signals. Figure 6. View a long record and the details of a zoom window simultaneously. 04 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet Advanced measurement capability - - - - - 23 automatic measurements Waveform math including FFT Standard go/no-go mask testing Sequential acquisition of up to 1000 trigger events Selectable high-pass, low-pass, band-pass, and band-reject digital ilters 23 automatic measurements All 1000 Series scopes come equipped with 23 automatic voltage, time and frequency measurements. Press the Measure key to bring up the three you use most often or display all single-channel measurements on the screen simultaneously. Figure 7. Display all single-channel measurements on screen simultaneously. Sequence mode for easier debug Record up to 1000 occurrences of a trigger event and then play them back to easily spot glitches or other anomalies for further examination. Store the waveforms to internal or external memory (USB lash drive). Segment 1000 Segment 2 Segment 1 Digital iltering on waveforms Apply a real-time digital ilter of your choice to the input source waveform to eliminate unwanted frequencies from your display. Digital iltering selections include Low-pass, high-pass, band-pass and band-reject ilters. Frequency limits are selectable between 250 Hz and the full bandwidth of your oscilloscope. Figure 8. Use sequence mode to record up to 1000 triggers and review in playback mode for anomalies. Advanced triggering Triggering options for the 1000 Series include edge, pulse width, composite video, pattern ("A" models only) and alternate channel trigger modes. These modes ensure that you can capture and view hard-to-ind signal conditions. Remote programming (Only available on "A" models) For remote instrument control over the built-in USB device port, utilize Keysight's I/O libraries with direct command control from Keysight VEE Pro, or National Instrument's I/O libraries and available instrument drivers for the 1000A Series scope in your application. These NI certiied drivers include Plug and Play for LabView and IVI for LabVIEW, LabWindows/CVI, and Measurement Studio for Visual Studio. Figure 9. The Ch 1 waveform (Yellow) shows an uniltered input and the Ch 2 waveform (Green) shows the same input signal with a low pass ilter. 05 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet Accelerated productivity - Autoscale - 11-Language localization of user interface, front panel controls, and manuals - Context-sensitive built-in help menus - USB connectivity - Free education student lab guide and professor slide set Make fast go/no-go decisions Automatic pass/fail mask testing comes as a standard feature on all 1000 Series scopes. Acquire a "golden" waveform and deine tolerance limits to create a test envelope. Create custom mask's based on XY tolerances and input those into the scope. Incoming signals will be compared to the allowable range and quickly lagged as pass or fail. This is ideal for manufacturing or service where you need to make decisions quickly. Figure 10. Mask testing provides a quick pass/fail comparison of an incoming signal to a test envelope you deine. Waveform math and FFT Standard math functions include addition, subtraction or multiplication of any two input channels and Fast Fourier Transform (FFT) with four user-selectable windows (Rectangle, Hanning, Hamming and Blackman). Multi-language interface Operate the oscilloscope in the language most familiar to you. The built-in help system, graphical user interface, front panel overlays and user's manual are available in eleven languages. Choose from: English, Japanese, simpliied Chinese, traditional Chinese, Korean, German, French, Spanish, Russian, Portuguese, and Italian. Figure 11. Built-in FFT enables easy spectral analysis on the time-domain signal. Autoscale Quickly display any active signals and automatically set the vertical, horizontal and trigger controls for optimal viewing with the press of the autoscale button. (This feature can be disabled or enabled for education customers). Connectivity Built-in USB host and device ports and free IntuiLink software make documentation and PC connectivity easy. Store waveforms and setups to a USB lash drive, easily update scope irmware, document directly to a connected PC running Microsoft Word or Excel, and print to any PictBridge compatible printer. Education Resource Kit Keysight provides a variety of oscilloscope resource training tools to help your EE students come up-to-speed on what an oscilloscope is and how to use one. Downloadable resources include: EE student's oscilloscope lab guide and tutorial, Professor's Oscilloscope Fundamentals slide-set, probe loading experiment and oscilloscope application notes. Figure 12. Choose from 11 different languages for oscilloscope interface and help. 06 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet Keysight 1000A Series portable oscilloscopes: Engineered to give you more scope than you thought you could afford Powerful Signal Capture and Display Turn menu off for almost 25% more viewing area (or set to turn off automatically on timeout) Bright and crisp 5.7-inch color LCD display with wide angle viewing Acquisition memory bar shows full 20 kpts of memory and highlights portion displayed Sturdy snap handle for easy carrying Two USB host ports facilitate saving data to a USB lash drive and enable quick irmware updates Secure with cable lock Secure with a Kensington lock or looped cable USB device port for USBTMC remote PC control also allows easy printing to all PictBridge compatible printers 07 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet Advanced Measurement Capabilities User-friendly menu facilitates access to advanced features like mask test, sequence mode, and digital iltering Push-button knobs enhance usability, for example, the Main/Zoom knob zooms in on a particular section of waveform. Push to toggle zoom on and off. Measurement cursors can be placed manually or automatically 23 automatic measurements with a "measure all" feature Comprehensive trigger functions including edge, pulse width, pattern ("A" models only), composite video and alternate channel Accelerated Productivity Multi-language interface support and built-in context-sensitive help in 11 languages Four math functions for quick display: +, -, x, FFT AutoScale to get your signal on screen fast with vertical, horizontal, and trigger controls automatically adjusted for best signal display Save up to 10 setups and waveform memories internally Default setup quickly returns the scope to a known starting point 08 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet Keysight 1000B Series portable oscilloscopes: Engineered to give you more scope than you thought you could afford Powerful Signal Capture and Display Turn menu off for almost 25% more viewing area (or set to turn off automatically on timeout) Bright and crisp 5.7-inch color LCD display with wide angle viewing Acquisition memory bar shows full 16 kpts of memory and highlights portion displayed Sturdy snap handle for easy carrying USB host port facilitates saving data to a USB lash drive and enable quick irmware updates Secure with cable lock Secure with a Kensington lock or looped cable MaskTesting Pass/Fail BNC output USB device port 09 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet Advanced Measurement Capabilities User-friendly menu facilitates access to advanced features like mask test, sequence mode, and digital iltering Push-button knobs enhance usability, for example, the Main/Zoom knob zooms in on a particular section of waveform. Push to toggle zoom on and off. Measurement cursors can be placed manually or automatically 23 automatic measurements with a "measure all" feature Comprehensive trigger functions including edge, pulse width, pattern ("A" models only), composite video and alternate channel Accelerated Productivity Multi-language interface support and built-in context-sensitive help in 11 languages Save up to 10 setups and waveform memories internally Default setup quickly returns the scope to a known starting point Four math functions for quick display: +, -, x, FFT AutoScale to get your signal on screen fast with vertical, horizontal, and trigger controls automatically adjusted for best signal display 10 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet Performance characteristics Bandwidth (-3dB)1, 2 DSO1052B: DSO1002A, DSO1004A: DSO1072B: DSO1102B, DSO1012A, DSO1014A: DSO1152B: DSO1022A, DSO1024A: Real-time sample rate 2 GSa/sec half channel interleaved, 1 GSa/sec all channels (A models) 1 GSa/sec half channel interleaved, 500 MSa/sec all channela (B models) Memory depth 20 kpts half channel interleaved, 10 kpts all channels (A models) 16 kpts half channel interleaved, 8 kpts all channels (B models) Channels DSO1052B, DSO1002A, DSO1072B, DSO1102B, DSO1012A, DSO1152B, DSO1022A : 2 channels DSO1004A, DSO1014A, DSO1024A : 4 channels Vertical resolution 8 bits Vertical sensitivity (range) 2 mV/div to 10 V/div 1 1. 2. DC to 50 MHz DC to 60 MHz DC to 70 MHz DC to 100 MHz DC to 150 MHz DC to 200 MHz DC gain accuracy 2 mV/div to 5 mV/div: 4.0% full scale (A and B models) 10 mV/div to 5 V/div: 3.0% full scale (A models only) 10 mV/div to 10 V/div: 3.0% full scale (B models only) Vertical zoom Vertical expand Maximum input voltage CAT I 300 Vrms, 400 Vpk; transient overvoltage 1.6kVpk Dynamic range +6 divisions from center screen Time-base range DSO1022A, DSO1024A: 1 nsec/div to 50 sec/div DSO1012A, DSO1014A, DSO1102B: 2 nsec/div to 50 sec/div DSO1002A, DSO1004A, DSO1052B, DSO1072B:5 nsec/div to 50 sec/div Selectable BW limit 20 MHz Horizontal modes Main (Y-T), XY, delayed zoom and roll Input coupling DC, AC and ground Input impedance 1 M 1% in parallel with 18 pF 3 pF (A models) 1 M 2% in parallel with 15 pF 3 pF (B models) Time scale accuracy1 50 ppm from 0 C to 30 C, (A models) 50 ppm + 2 ppm per C from 30 C to 45 C + 5 ppm x (years since manufacture) (A models) 50 ppm over 1 ms (B models only) Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and 10C from firmware calibration temperature. 20 MHz (when vertical scale is set to < 5 mV) 11 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet Performance characteristics Acquisition modes Normal Averaging Sequence Roll Displays sampled data directly to the screen in real time Selectable from 2, 4, 8,16, 32, 64, 128 or 256 Selectable 1 to 1,000 acquisition frames can be recorded, played back and stored in the scope memory or external USB memory Captures high-frequency glitches as narrow as 10 nsec (A models) and 20 nsec (B models) when viewing signals at slow sweep speeds Waveform display rolls from right to left. minimum horizontal scale setting is 50 msec/div. Interpolation Sin (x)/x Trigger coupling AC, DC, LF reject, HF reject Peak Detect Trigger modes Force Edge Video Pulse width Alternate Triggers immediately when front panel button is pressed Triggers on the positive and/or negative slope on any channel Triggers on NTSC, PAL or SECAM video signals Triggers on pulse width greater than, equal to or less than a specific time limit, ranging from 20 nsec to 10 sec (A models) and 50ns to 10 sec (B models) Triggers on two non-synchronized active channels Trigger source Ch 1, 2, Ext, Ext/5, AC Line (edge only) (2 channel A models) Ch 1, 2, Ext, AC Line (edge only) (B Models) Ch 1, 2, 3, 4, Ext, Ext/5, AC Line (edge only) (4-channel A models) Trigger sensitivity1 5 mV/div: 1 div from DC to 10 MHz, 1.5 div from 10 MHz to full bandwidth <5 mV/div: 1 div from DC to 10 MHz, 1.5 div from 10 MHz to 20 MHz Cursor measurement Manual, track waveform or automatic measurement selections. Manual and track waveform selections provide readout of Horizontal (X, DX) and Vertical (Y, DY) Auto measurement Voltage Time Counter Maximum, minimum, peak-to-peak, top, base, amplitude, average, RMS, overshoot, preshoot Period, frequency, rise time, fall time, + width, - width, +duty cycle, -duty cycle, delay A-->B (rising edge), delay A-->B (falling edge), phase A-->B (rising edge) and phase A-->B (falling edge)Integrated 6-digit frequency counter on any channel. Counts up to the scope's bandwidth Display all measurements Mode to display all single-channel automatic measurements simultaneously on the display Math Functions A+B, A-B, AxB, FFT Source channel selection for A and B can be any combination of oscilloscope channels 1 and 2 (or 3 and 4 on 4 channel A models). Auto Scale Finds and displays all active channels, sets edge trigger modes on highest numbered channels, sets vertical sensitivity on channels, time base to display ~2 periods. Requires minimum voltage >20 mVpp, 1% duty cycle and minimum frequency >50 Hz Display Display persistence Display types 5.7 inch diagonal color QVGA TFT LCD display with 300 cd/m2 backlight intensity OFF, Infinite Dots, Vectors Waveform update rate 400 waveforms/sec (A models) 200 wfm/sec (B models) Save/Recall internal 10 setups and 10 waveforms can be saved and recalled using internal non-volatile memory locations. 1 reference waveform can be saved and recalled using an internal volatile memory location for visual comparisons. Save/Recall external Setups: STP saved and recalled (Note: setups not transferable between A and B models) Waveforms: WFM saved and recalled, CSV saved Reference waveforms: REF saved and recalled for visual comparisons Images: 8-bit BMP, 24-bit BMP, PNG saved 1. Denotes warranted specifications, all others are typical. Specifications are valid after a 30-minute warm-up period and 10C from firmware calibration temperature. 12 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet Performance characteristics I/O Standard ports USB 2.0-compliant host port on front panel (A and B models) and rear panel (A models only) compatible with USB flash drives. USB 2.0 device port for PictBridge compatible printing (A and B models) and USBTMC remote PC control (A models only) Max transfer rate USB 2.0 full-speed up to 12 Mb/sec USB flash drive compatibility Most FAT formatted <2 GB or FAT32 formatted <32 GB flash drives Printer compatibility PictBridge-compliant printers via USB device port General characteristics Physical size 12.78 inches W x 6.21 inches H x 5.08 inches D (32.46 cm W x 15.78 cm H x 12.92 cm D) (A models) 11.9 inches W x 6.06 inches H x 5.23 inches D (30.3 cm W X 15.4 cm H X 13.3 cm D) (B models) Weight Net: 3.03 kgs (6.68 lbs) Shipping: 4.87 kgs (10.74 lbs) (A models) Net: 2.4 kgs (5.3lbs) Shipping: 3.87 kgs (8.3lbs) (B models) Probe comp output Frequency ~1 kHz; Amplitude ~3 V Scope lock Secure with a Kensington lock or looped cable through notch built into chassis Power requirements Line range 100-240 VAC, 50/60 Hz 10% Power usage ~60 W max (A models) ~50 W max (B models) Environmental characteristics (A models) Ambient temperature Operating 0C to +40C; non-operating -20C to +60C Humidity Operating 90% RH at 40C for 24 hr; non-operating 60% RH at 60C for 24 hr Altitude Operating to 4,400 m (15,000 ft); non-operating to 15,000 m (49,213 ft) Vibration Keysight class GP and MIL-PRF-28800F; class 3 random Shock Keysight class GP and MIL-PRF-28800F Pollution degree2 Normally only dry non-conductive pollution occurs. Occasionally a temporary conductivity caused by condensation must be expected Indoor use Rated for indoor use only Environmental characteristics (B models) Ambient temperature Operating 10C to +40C; non-operating -20C to +60C Cooling Method Fan force air flow Humidity Operating; +35C or below 90 % relative humidity ; non-operating +40C 60 % relative humidity Altitude Operating Operating to 3,000 m (9.842 ft); non-operating to 15,000 m (49,213 ft) Vibration Keysight class GP and M-PRF-28800F; class 3 random Shock Keysight class GP and M-PRF-28800F; 2 Pollution degree Normally only dry non-conductive pollution occurs. Occasionally a temporary conductivity caused by condensation must be expected Regulatory Safety - UL61010-1:2003, CSA22.2 No. 61010-1:2003, EN61010-1:2001, IEC61010-1:2001. EMI - Passes IEC 61236 -1:2004 / EN 61326-1:2006 Meets EU EMC Directive 2004/108/EC requirements Indoor use Rated for indoor use only 13 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet Ordering information 2 - Channel Models Description DSO1052B 50 MHz, 1 GSa/s, 16 kpts, 2-ch DSO1072B 70 MHz, 1 GSa/s, 16 kpts, 2-ch DSO1102B 100 MHz, 1 GSa/s, 16 kpts, 2-ch DSO1152B 150 MHz, 1 GSa/s, 16 kpts, 2-ch DSO1022A 200 MHz, 2 GSa/s, 20 kpts, 2-ch 4 - Channel Models Description DSO1004A 60 MHz, 2 GSa/s, 20 kpts, 4-ch DSO1014A 100 MHz, 2 GSa/s, 20 kpts, 4-ch DSO1024A 200 MHz, 2 GSa/s, 20 kpts, 4-ch Soft carrying case for 1000 Series Accessories included: - IntuiLink toolbar connectivity software downloadable free from www.keysight.com/find/intuilink - Documentation CD - Localized front panel overlay (if language option other than English is chosen) - Power cord - 10:1 passive probe for each input channel (2 or 4) - Education student lab guide and professor slide set downloadable free from: www.Keysight.com/find/1000edu Optional accessories: - N2738A Soft carrying case for 1000A/B Series - N2739A Rackmount kit for 1000A Series (A models only) Recommended probes - N2862B 150 MHz 10:1 passive probe (standard with 50, 60, 70, 100 MHz models) - N2863B 300 MHz 10:1 passive probe (standard with 150, 200 MHz models) - 10070D 20 MHz 1:1 passive probe - 10076B 250 MHz, 100:1, 4 kV passive probe - N2771B 50 MHz, 1000:1 30 kV passive probe - N2791A 25 MHz, 700V differential probe - N2891A 70 MHz, 7 kV differential probe - 1146A 100 kHz, 100A AC/DC current probe (requires 9V battery) Software and Drivers - IntuiLink toolbar connectivity software downloadable free from www.keysight.com/find/intuilink Rackmount kit for 1000A Series only 14 | Keysight | DSO1000A/B Series Portable Oscilloscopes - Data Sheet myKeysight www.keysight.com/find/mykeysight A personalized view into the information most relevant to you. www.axiestandard.org AdvancedTCA(R) Extensions for Instrumentation and Test (AXIe) is an open standard that extends the AdvancedTCA for general purpose and semiconductor test. Keysight is a founding member of the AXIe consortium. ATCA(R), AdvancedTCA(R), and the ATCA logo are registered US trademarks of the PCI Industrial Computer Manufacturers Group. For more information on Keysight Technologies' products, applications or services, please contact your local Keysight office. The complete list is available at: www.keysight.com/find/contactus Americas Canada Brazil Mexico United States (877) 894 4414 55 11 3351 7010 001 800 254 2440 (800) 829 4444 Asia Paciic Australia China Hong Kong India Japan Korea Malaysia Singapore Taiwan Other AP Countries 1 800 629 485 800 810 0189 800 938 693 1 800 112 929 0120 (421) 345 080 769 0800 1 800 888 848 1 800 375 8100 0800 047 866 (65) 6375 8100 www.lxistandard.org LAN eXtensions for Instruments puts the power of Ethernet and the Web inside your test systems. Keysight is a founding member of the LXI consortium. www.pxisa.org PCI eXtensions for Instrumentation (PXI) modular instrumentation delivers a rugged, PC-based high-performance measurement and automation system. Three-Year Warranty www.keysight.com/find/ThreeYearWarranty Keysight's commitment to superior product quality and lower total cost of ownership. The only test and measurement company with three-year warranty standard on all instruments, worldwide. Keysight Assurance Plans www.keysight.com/find/AssurancePlans Up to five years of protection and no budgetary surprises to ensure your instruments are operating to specification so you can rely on accurate measurements. www.keysight.com/quality Keysight Technologies, Inc. DEKRA Certified ISO 9001:2008 Quality Management System Keysight Channel Partners www.keysight.com/find/channelpartners Get the best of both worlds: Keysight's measurement expertise and product breadth, combined with channel partner convenience. www.keysight.com/find/DSO1000A/B Europe & Middle East Austria Belgium Finland France Germany Ireland Israel Italy Luxembourg Netherlands Russia Spain Sweden Switzerland United Kingdom 0800 001122 0800 58580 0800 523252 0805 980333 0800 6270999 1800 832700 1 809 343051 800 599100 +32 800 58580 0800 0233200 8800 5009286 0800 000154 0200 882255 0800 805353 Opt. 1 (DE) Opt. 2 (FR) Opt. 3 (IT) 0800 0260637 For other unlisted countries: www.keysight.com/find/contactus (BP-07-01-14) This information is subject to change without notice. (c) Keysight Technologies, 2012 - 2014 Published in USA, August 2, 2014 5989-9368EN www.keysight.com