DF HIGHLY SENSITIVE DIP MINIATURE RELAY 16 .630 DF-RELAYS UL File No.: E43149 CSA File No.: LR26550 9.9 .390 * Smaller than most of 2 Form C relays Header area: 80% of DS2 relay Cubic measure: 57% of DS2 relay * High sensitivity -- 100 mW nominal power for 1 coil latching type * DIP - matching 14 pin IC socket 7.0 .276 mm inch SPECIFICATIONS Contact Characteristics Arrangement Initial contact resistance, max. (By voltage drop 6 V DC 1 A) Max. operating speed Initial insulation resistance*1 Between open contacts Initial breakdown Between contact sets voltage*2 Between contacts and coil Operate time*3 (at nominal voltage) Release time(without diode)*3 (at nominal voltage) Set time*3 (latching) (at nominal voltage) Reset time*3 (latching) (at nominal voltage) 50 m Gold-clad silver Contact material Nominal switching capacity Max. switching power Max. switching voltage Rating (resistive) Max. switching current Min. switching capacity UL/CSA rating Single side stable Mechanical (at 180 cpm) 1 coil & 2 coil latching Expected 1 A 30 V DC life (min. resistive operations) Electrical (at 20 cpm) 0.5 A 30 V AC resistive Coil (Polarized) (at 25C 77F) Single side stable 1 coil latching 2 coil latching 2 Form C 1A 30 VDC 0.5A 30 VAC 30 W, 30 V A 60 V DC, 125 V AC 1A 1 mA 1 V DC 1 A 30 V DC 0.3 A 125 V AC 0.3 A 110 V DC 5x106 Temperature rise (at 20C) 6 10 Shock resistance 105 Functional*4 Destructive*5 Functional*6 105 Vibration resistance Destructive Nominal 200 mW 100 mW 200 mW Minimum 100 mW 65 mW 130 mW Conditions for operation, Ambient transport and storage*7 (Not freezing and condens- temperature ing at low temperature) Humidity Unit weight 60 cpm Min. 1,000 M (at 500 V DC) 500 Vrms for 1 min. 500 Vrms for 1 min. 1,000 Vrms for 1 min. Max. 5 ms (Approx. 2.5 ms) Max. 3 ms (Approx. 1 ms) Max. 5 ms (Approx. 2.5 ms) Max. 3 ms (Approx. 2.5 ms) Max. 65C with nominal voltage across coil and at nominal switching capacity Min. 294 m/s2 {30 G} Min. 980 m/s2 {100 G} 89.6 m/s2 {9 G}, 10 to 55 Hz at double amplitude of 1.5 mm 89.6 m/s2 {9 G}, 10 to 55 Hz at double amplitude of 1.5 mm -40C to +70C -40F to +158F 5 to 85%R.H. Approx. 2.4 g .085 oz Remarks *5 Half-wave pulse of sine wave: 6ms *6 Detection time: 10s *7 Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 49) *1 Measurement at same location as "Intial breakdown voltage" section *2 Detection current: 10mA *3 Excluding contact bounce time *4 Half-wave pulse of sine wave: 6ms; detection time: 10s TYPICAL APPLICATIONS Signal transmission application requiring high sensitivity and low profile miniature size * Audio visual equipment * Telecommunication equipment * Computer peripherals ORDERING INFORMATION Ex. DF2 L DC5V Operating function Coil voltage Nil: Single side stable L: 1 coil latching L2: 2 coil latching DC 1.5, 3, 5, 6, 9, 12, 24 V (Notes) 1. For UL/CSA recognized type, add suffix UL/CSA. (Notes) 2. Standard packing: Carton: 50 pcs. Case: 500 pcs. 1 en_ds_61002_0000: 040804J DF TYPES AND COIL DATA (at 20C 68F) Single side stable Part No. DF2-DC1.5V DF2-DC3V DF2-DC5V DF2-DC6V DF2-DC9V DF2-DC12V DF2-DC24V Nominal voltage, V DC 1.5 3 5 6 9 12 24 Pick-up voltage, max. V DC 1.05 2.1 3.5 4.2 6.3 8.4 16.8 Drop-out voltage, min. DC 0.15 0.3 0.5 0.6 0.9 1.2 2.4 Coil resistance, (10%) 11.25 45 125 180 405 720 2,880 Nominal operating current, mA 133.3 66.7 40.0 33.3 22.2 16.7 8.3 Nominal operating power, mW 200 200 200 200 200 200 200 Nominal voltage, V DC 1.5 3 5 6 9 12 24 Set and Reset voltage, V DC (max.) 1.2 2.4 4.0 4.8 7.2 9.6 19.2 Coil resistance, (10%) 22.5 90 250 360 810 1,440 5,760 Nominal operating current, mA 66.7 33.3 20.0 16.7 11.1 8.3 4.1 Nominal operating power, mW 100 100 100 100 100 100 100 Max. allowable voltage, V DC (70C 158F) 1.8 3.6 6.0 7.2 10.8 14.4 28.8 Nominal voltage, V DC 1.5 3 5 6 9 12 24 Set and Reset voltage, V DC (max.) 1.2 2.4 4.0 4.8 7.2 9.6 19.2 Nominal operating current, mA 133.3 66.6 40.0 33.3 22.2 16.7 8.3 Nominal operating power, mW 200 200 200 200 200 200 200 Max. allowable voltage, V DC (70C 158F) 1.8 3.6 6.0 7.2 10.8 14.4 28.8 1 coil latching Part No. DF2-L-DC1.5V DF2-L-DC3V DF2-L-DC5V DF2-L-DC6V DF2-L-DC9V DF2-L-DC12V DF2-L-DC24V 2 coil latching Part No. DF2-L2-DC1.5V DF2-L2-DC3V DF2-L2-DC5V DF2-L2-DC6V DF2-L2-DC9V DF2-L2-DC12V DF2-L2-DC24V Coil resistance, (10%) Set coil Reset coil 11.25 45 125 180 405 720 2,880 11.25 45 125 180 405 720 2,880 Max. allowable voltage, V DC (70C 158F) 1.8 3.6 6.0 7.2 10.8 14.4 28.8 DIMENSIONS mm inch Single side stable PC board pattern (Copper-side view) 9.9 .390 8-0.9 dia. 8-.035 7.0 .276 3.5 .138 5.08 5.08 2.54 .200 .200 .100 7.62 .300 16 .630 9.9 .390 7.62 .300 2.54 .100 PC board pattern (Copper-side view) 8-0.9 dia. 8-.035 7.0 .276 3.5 .138 0.6 .024 5.08 5.08 2.54 .200 .200 .100 0.25 .010 7.62 .300 2.54 .100 9.9 .390 10-0.9 dia. 10-.035 7.0 .276 3.5 .138 5.08 2.54 .200 2.54 .100 .100 en_ds_61002_0000: 040804J 0.25 .010 7.62 .300 7 8 10 SET RST COM 12 SET RST COM 6 5 3 PC board pattern (Copper-side view) 0.6 .024 2.54 .100 Schematic (Bottom view) 1 Reset condition 2 coil latching (2.0) (.079) 2.54 .100 7.62 .300 16 .630 1 Deenergized condition 1 coil latching (2.0) (.079) N.O. N.C. COM 6 5 3 - Set + + Reset - (2.0) (.079) 0.25 .010 7 8 10 12 N.O. N.C. COM + 7.62 .300 2.54 .100 2.54 .100 Schematic (Bottom view) SET RST COM + + Set Coil 0.6 .024 2.54 .100 Schematic (Bottom view) Reset Coil 16 .630 SET RST COM - - Reset condition 2 DF REFERENCE DATA 1. Maximum switching power 2. Life curve 3. Mechanical life Tested sample: DF2-DC12V Tested sample: DF2-DC12V Tested sample: DF2-DC12V, 12 pcs. Ambient temperature: 15C to 25C 59F to 77F 0.5 100 Life, x104 Contact current, A 500 DC resistive load 0.2 DC inductive load (L/R=7mS) 0.1 AC inductive load (cos =0.4) 0.05 50 30 V DC resistive load 30 V AC resistive load 10 Pick-up/drop-out voltage, V 1,000 AC resistive load 1.0 8 Max. 7 x Min. 6 Pick-up voltage 5 4 3 Max. x Min. 2 Drop-out voltage 1 5 10 20 30 60 125 0 0.2 0.4 0.6 0.8 0 1.0 100 300 500 No. of operations, x104 No. of operations, x104 Contact voltage, V 4. Electrical life 5. Coil temperature rise Change of pick-up and drop-out voltage Tested sample: DF2-DC5V, 8 pcs. Condition: 1 mA 1 V DC resistive load Switching frequency: 10 Hz Ambient temperature: 20C to 25C 68F to 77F Change of contact resistance Tested sample: DF2-DC5V, 8 pcs. Condition: 1 mA 1 V DC resistive load Switching frequency: 10 Hz Ambient temperature: 20C to 25C 68F to 77F Tested sample: DF2-DC12V, 5 pcs. Max. 3 x Min. 2 Pick-up voltage Max. x 1 Min. 100 Max. 50 40 30 20 50 1 A (inside the coil) 40 0A (inside the coil) 30 20 1 A (contact) 10 Drop-out voltage 100 Temperature rise, C N.C. N.O. Contact resistance, m Pick-up/drop-out voltage, V 4 Min. 200 300 400 500 10 1 A (terminal) 0 100 200 300 400 500 No. of operations, x104 Switching current, A 80 100 120 140 Coil applied voltage, %V 6. Operate/release time characteristics 7. Ambient temperature characteristics 8. H2S gas test Tested sample: DF2-DC12V Tested sample: DF2-DC12V Gas density: 2 to 5 p.p.m. Ambient temperature: 20C to 26C 68F to 79F Humidity: 35 to 85% R.H. Operate time Release time 3 -40 -20 Max. x Min. 2 Max. x Min. 1 50 40 Drop-out voltage 30 20 10 0 20 40 Pick-up voltage 60 80 -10 Ambient temperature,C -20 Contact resistance, m 4 Variation ratio, % Operate/release time, ms 5 40 N.C. N.O. 30 Max. 20 Min. 10 -30 0 80 90 100 110 120 Coil applied voltage,%V -40 0 50 200 250 400 500 Exposed time, hr NOTE Soldering When soldering through hole terminals, soldering should be done at 245C 473F within 10 s. For Cautions for Use, see Relay Technical Information (Page 36 to 64). 126 en_ds_61002_0000: 040804J 2000 Matsushita Electric Works GroupWorks Europe(Europe) AG Matsushita Electric For Cautions forADOBE Use, see Relay produced TechnicalJanuary, Information. PDF-file 1999 / Technical data may change without notice (c)