ON Semiconductor 2N6056 NPN Darlington Silicon Power Transistor ON Semiconductor Preferred Device . . . designed for general-purpose amplifier and low frequency switching applications. DARLINGTON 8 AMPERE SILICON POWER TRANSISTOR 80 VOLTS 100 WATTS * High DC Current Gain -- * * * hFE = 3000 (Typ) @ IC = 4.0 Adc Collector-Emitter Sustaining Voltage -- @ 100 mA VCEO(sus) = 80 Vdc (Min) Low Collector-Emitter Saturation Voltage -- VCE(sat) = 2.0 Vdc (Max) @ IC = 4.0 Adc = 3.0 Vdc (Max) @ IC = 8.0 Adc Monolithic Construction with Built-In Base-Emitter Shunt Resistors IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIII IIIII IIII IIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIII IIIII IIII IIII IIIIIIIIIIIII IIIII IIII IIII IIIIIIIIIIIII IIIII IIII IIII IIIIIIIIIIIII IIIII IIII IIII IIIIIIIIIIIII IIIII IIII IIII IIIIIIIIIIIII IIIII IIII IIII IIIIIIIIIIIII IIIII IIII IIII IIIIIIIIIIIII IIIII IIII IIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIII IIIII IIII IIII IIIIIIIIIIIII IIIII IIII IIII IIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIII IIIII IIII IIII IIIIIIIIIIIII IIIII IIII IIII MAXIMUM RATINGS (1) Rating Collector-Emitter Voltage Symbol Max Unit VCEO 80 Vdc Collector-Base Voltage VCB 80 Vdc Emitter-Base Voltage VEB 5.0 Vdc Collector Current -- Continuous Peak IC 8.0 16 Adc Base Current IB 120 mAdc Total Device Dissipation @ TC = 25C Derate above 25C PD 100 0.571 Watts W/C TJ, Tstg -65 to +200 C Symbol Max Unit RJC 1.75 C/W Operating and Storage Junction Temperature Range CASE 1-07 TO-204AA (TO-3) THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case (1) Indicates JEDEC Registered Data PD, POWER DISSIPATION (WATTS) 100 80 60 40 20 0 0 25 50 75 100 125 TC, TEMPERATURE (C) 150 175 200 Figure 1. Power Derating Preferred devices are ON Semiconductor recommended choices for future use and best overall value. Semiconductor Components Industries, LLC, 2001 March, 2001 - Rev. 2 1 Publication Order Number: 2N6056/D 2N6056 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III IIIIIIIIIIIIIIIIIIIIII IIIII III IIII III *ELECTRICAL CHARACTERISTICS (TC = 25C unless otherwise noted) Characteristic Symbol Min Max 80 -- -- 0.5 -- -- 0.5 5.0 -- 2.0 750 100 18000 -- -- -- 2.0 3.0 Unit OFF CHARACTERISTICS Collector-Emitter Sustaining Voltage (2) (IC = 100 mAdc, IB = 0) VCEO(sus) Collector Cutoff Current (VCE = 40 Vdc, IB = 0) ICEO Collector Cutoff Current (VCE = Rated VCB, VBE(off) = 1.5 Vdc) (VCE = Rated VCB, VBE(off) = 1.5 Vdc, TC = 150C) ICEX Emitter Cutoff Current (VBE = 5.0 Vdc, IC = 0) IEBO Vdc mAdc mAdc mAdc ON CHARACTERISTICS (2) DC Current Gain (IC = 4.0 Adc, VCE = 3.0 Vdc) (IC = 8.0 Adc, VCE = 3.0 Vdc) hFE -- Collector-Emitter Saturation Voltage (IC = 4.0 Adc, IB = 16 mAdc) (IC = 8.0 Adc, IB = 80 mAdc) VCE(sat) Vdc Base-Emitter Saturation Voltage (IC = 8.0 Adc, IB = 80 mAdc) VBE(sat) -- 4.0 Vdc Base-Emitter On Voltage (IC = 4.0 Adc, VCE = 3.0 Vdc) VBE(on) -- 2.8 Vdc Magnitude of Common Emitter Small-Signal Short Circuit Current Transfer Ratio (IC = 3.0 Adc, VCE = 3.0 Vdc, f = 1.0 MHz) |hfe| 4.0 -- -- Output Capacitance (VCB = 10 Vdc, IE = 0, f = 0.1 MHz) Cob -- 200 pF Small-Signal Current Gain (IC = 3.0 Adc, VCE = 3.0 Vdc, f = 1.0 kHz) hfe 300 -- -- DYNAMIC CHARACTERISTICS *Indicates JEDEC Registered Data. (2) Pulse Test: Pulse Width = 300 s, Duty Cycle = 2.0% http://onsemi.com 2 2N6056 5.0 V RB & RC VARIED TO OBTAIN DESIRED CURRENT LEVELS -3CC 0V D1 MUST BE FAST RECOVERY TYPE, e.g., 1N5825 USED ABOVE IB 100 mA RC MSD6100 USED BELOW IB 100 mA SCOPE TUT V2 RB approx +12 V D1 8.0 k 50 51 0 V1 approx -8.0 V t, TIME (s) 2.0 +4.0 V 25 s for td and tr, D1 is disconnected and V2 = 0 tr, tf 10 ns DUTY CYCLE = 1.0% ts 3.0 tf 1.0 0.7 0.5 0.3 0.2 0.1 0.07 0.05 0.1 For NPN test circuit reverse diode, polarities and input pulses. VCC = 30 V IC/IB = 250 IB1 = IB2 TJ = 25C 0.2 r(t), TRANSIENT THERMAL RESISTANCE (NORMALIZED) Figure 2. Switching Times Test Circuit 1.0 0.7 0.5 0.3 0.07 0.05 0.01 0.1 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (AMP) 5.0 7.0 10 Figure 3. Switching Times 0.2 0.1 RJC(t) = r(t) RJC RJC = 1.75C/W 2N6056 D CURVES APPLY FOR POWER PULSE TRAIN SHOWN READ TIME AT t1 TJ(pk) - TC = P(pk) JC(t) 0.05 0.02 0.03 0.02 td @ VBE(off) = 0 D = 0.5 0.2 0.1 tr 0.01 SINGLE PULSE 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 t, TIME (ms) 20 30 Figure 4. Thermal Response http://onsemi.com 3 50 70 100 P(pk) t1 t2 DUTY CYCLE, D = t1/t2 200 300 500 700 1000 2N6056 ACTIVE-REGION SAFE OPERATING AREA 50 IC, COLLECTOR CURRENT (AMP) 20 There are two limitations on the power handling ability of a transistor: average junction temperature and second breakdown. Safe operating area curves indicate IC - VCE limits of the transistor that must be observed for reliable operation; i.e., the transistor must not be subjected to greater dissipation than the curves indicate. The data of Figure 5 is based on TJ(pk) = 200C; TC is variable depending on conditions. Second breakdown pulse limits are valid for duty cycles to 10% provided TJ(pk) 200C. TJ(pk) may be calculated from the data in Figure 4. At high case temperatures, thermal limitations will reduce the power that can be handled to values less than the limitations imposed by second breakdown. 0.1 ms 10 5.0 0.5 ms 1.0 ms 5.0 ms TJ = 200C 2.0 1.0 dc SECOND BREAKDOWN LIMIT BONDING WIRE LIMIT THERMALLY LIMITED @ TC = 25C (SINGLE PULSE) 0.5 0.2 0.1 0.05 1.0 2.0 5.0 7.0 10 3.0 20 30 50 70 100 VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS) Figure 5. Safe Operating Area 300 5000 3000 2000 200 TJ = 25C 1000 C, CAPACITANCE (pF) hfe , SMALL-SIGNAL CURRENT GAIN 10,000 TC = 25C VCE = 3.0 Vdc IC = 3.0 Adc 500 300 200 100 50 30 20 10 1.0 Cob 100 Cib 70 50 2.0 5.0 10 20 50 100 f, FREQUENCY (kHz) 200 500 1000 30 0.1 0.2 0.5 1.0 2.0 5.0 10 20 VR, REVERSE VOLTAGE (VOLTS) Figure 7. Capacitance Figure 6. Small-Signal Current Gain http://onsemi.com 4 50 100 2N6056 VCE = 3.0 V TJ = 150C 3000 2000 1000 500 300 200 0.1 25C -55C 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (AMP) 5.0 7.0 10 3.0 TJ = 25C 2.6 IC = 2.0 A 4.0 A 1.8 1.4 1.0 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 IB, BASE CURRENT (mA) TJ = 25C 2.5 2.0 1.0 0.5 0.1 10 Figure 9. Collector Saturation Region 3.0 1.5 6.0 A 2.2 Figure 8. DC Current Gain V, VOLTAGE (VOLTS) hFE, DC CURRENT GAIN 10,000 5000 VCE , COLLECTOR-EMITTER VOLTAGE (VOLTS) 20,000 VBE @ VCE = 3.0 V VBE(sat) @ IC/IB = 250 VCE(sat) @ IC/IB = 250 0.2 0.3 0.5 0.7 1.0 2.0 3.0 IC, COLLECTOR CURRENT (AMP) Figure 10. "On" Voltage http://onsemi.com 5 5.0 7.0 10 20 30 2N6056 PACKAGE DIMENSIONS CASE 1-07 TO-204AA (TO-3) ISSUE Z A N C -T- E D SEATING PLANE K 2 PL 0.13 (0.005) U T Q M M Y M DIM A B C D E G H K L N Q U V -Y- L V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. ALL RULES AND NOTES ASSOCIATED WITH REFERENCED TO-204AA OUTLINE SHALL APPLY. 2 H G B M T Y 1 -Q- 0.13 (0.005) M INCHES MIN MAX 1.550 REF --1.050 0.250 0.335 0.038 0.043 0.055 0.070 0.430 BSC 0.215 BSC 0.440 0.480 0.665 BSC --0.830 0.151 0.165 1.187 BSC 0.131 0.188 STYLE 1: PIN 1. BASE 2. EMITTER CASE: COLLECTOR http://onsemi.com 6 MILLIMETERS MIN MAX 39.37 REF --26.67 6.35 8.51 0.97 1.09 1.40 1.77 10.92 BSC 5.46 BSC 11.18 12.19 16.89 BSC --21.08 3.84 4.19 30.15 BSC 3.33 4.77 2N6056 Notes http://onsemi.com 7 2N6056 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION NORTH AMERICA Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line: 303-675-2167 or 800-344-3810 Toll Free USA/Canada N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (Mon-Fri 2:30pm to 7:00pm CET) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (Mon-Fri 2:00pm to 7:00pm CET) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (Mon-Fri 12:00pm to 5:00pm GMT) Email: ONlit@hibbertco.com CENTRAL/SOUTH AMERICA: Spanish Phone: 303-308-7143 (Mon-Fri 8:00am to 5:00pm MST) Email: ONlit-spanish@hibbertco.com Toll-Free from Mexico: Dial 01-800-288-2872 for Access - then Dial 866-297-9322 ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 1-303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong & Singapore: 001-800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-0031 Phone: 81-3-5740-2700 Email: r14525@onsemi.com ON Semiconductor Website: http://onsemi.com EUROPEAN TOLL-FREE ACCESS*: 00-800-4422-3781 *Available from Germany, France, Italy, UK, Ireland For additional information, please contact your local Sales Representative. http://onsemi.com 8 2N6056/D