(R) SEMICONDUCTOR 500mW SOD-123 SURFACE MOUNT Green Product Flat Lead Surface Mount Plastic Package Zener Voltage Regulators Absolute Maximum Ratings Symbol PD TA = 25C unless otherwise noted Parameter Power Dissipation Value Units 500 mW TSTG Storage Temperature Range -65 to +150 C TOPR Operating Temperature Range -65 to +150 C These ratings are limiting values above which the serviceability of the diode may be impaired. SOD-123 Flat Lead Specification Features: Wide Zener Voltage Range Selection, 3.0V to 75V VZ Tolerance Selection of 5% Flat Lead SOD-123 Plastic Package Cathode Surface Device Type Mounting Anode ELECTRICAL SYMBOL RoHS Compliant Green EMC Matte Tin(Sn) Lead Finish Band Indicates Cathode Electrical Characteristics Device Type Device Marking MMSZ5221BW MMSZ5222BW MMSZ5223BW MMSZ5224BW MMSZ5225BW MMSZ5226BW MMSZ5227BW MMSZ5228BW MMSZ5229BW MMSZ5230BW MMSZ5231BW MMSZ5232BW MMSZ5233BW MMSZ5234BW MMSZ5235BW MMSZ5236BW MMSZ5237BW MMSZ5238BW MMSZ5239BW MMSZ5240BW MMSZ5241BW MMSZ5242BW MMSZ5243BW Z2V4 Z2V5 Z2V7 Z2V8 Z3V0 Z3V3 Z3V6 Z3V9 Z4V3 Z4V7 Z5V1 Z5V6 Z6V0 Z6V2 Z6V8 Z7V5 Z8V2 Z8V7 Z9V1 Z10V Z11V Z12V Z13V TA = 25C unless otherwise noted VZ @ IZT (Volts) Min Nom Max 2.28 2.38 2.57 2.66 2.85 3.14 3.42 3.71 4.09 4.47 4.85 5.32 5.70 5.89 6.46 7.13 7.79 8.27 8.65 9.50 10.45 11.40 12.35 2.4 2.5 2.7 2.8 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.0 6.2 6.8 7.5 8.2 8.7 9.1 10 11 12 13 2.52 2.63 2.84 2.94 3.15 3.47 3.78 4.10 4.52 4.94 5.36 5.88 6.30 6.51 7.14 7.88 8.61 9.14 9.56 10.50 11.55 12.60 13.65 IZT (mA) ZZT @ IZT () Max ZZK @ IZK = 0.25mA () Max IR @ VR (A) Max VR (Volts) 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 9.5 30 30 30 30 29 28 24 23 22 19 17 11 7 7 5 6 8 8 10 17 22 30 13 1200 1250 1300 1400 1600 1600 1700 1900 2000 1900 1600 1600 1600 1000 750 500 500 600 600 600 600 600 600 100 100 75 75 50 25 15 10 5 5 5 5 5 5 3 3 3 3 3 3 2 1 0.5 1 1 1 1 1 1 1 1 1 2 2 3 3.5 4 5 6 6.5 6.5 7 8 8.4 9.1 9.9 Nov. 2008 Release, Revision D Page 1 MMSZ5221BW through MMSZ5267BW TAK CHEONG TAK CHEONG (R) SEMICONDUCTOR Electrical Characteristics Device Type TA = 25C unless otherwise noted VZ @ IZT (Volts) Device Marking Min Nom 4. ZZT @ IZT () Max ZZK @ IZK = 0.25mA () Max IR @ VR (A) Max VR (Volts) 9 8.5 7.8 7.4 7 6.6 6.2 5.6 5.2 5 4.6 4.5 4.2 3.8 3.4 3.2 3 2.7 2.5 2.2 2.1 2.0 1.8 1.7 15 16 17 19 21 23 25 29 33 35 41 44 49 58 70 80 93 105 125 150 170 185 230 270 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 800 900 1000 1100 1300 1400 1400 1600 1700 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 10 11 12 13 14 14 15 17 18 19 21 21 23 25 27 30 33 36 39 43 46 47 52 56 Max MMSZ5244BW Z14V 13.30 14 14.70 MMSZ5245BW Z15V 14.25 15 15.75 MMSZ5246BW Z16V 15.20 16 16.80 MMSZ5247BW Z17V 16.15 17 17.85 MMSZ5248BW Z18V 17.10 18 18.90 MMSZ5249BW Z19V 18.05 19 19.95 MMSZ5250BW Z20V 19.00 20 21.00 MMSZ5251BW Z22V 20.90 22 23.10 MMSZ5252BW Z24V 22.80 24 25.20 MMSZ5253BW Z25V 23.75 25 26.25 MMSZ5254BW Z27V 25.65 27 28.35 MMSZ5255BW Z28V 26.60 28 29.40 MMSZ5256BW Z30V 28.50 30 31.50 MMSZ5257BW Z33V 31.35 33 34.65 MMSZ5258BW Z36V 34.20 36 37.80 MMSZ5259BW Z39V 37.05 39 40.95 MMSZ5260BW Z43V 40.85 43 45.15 MMSZ5261BW Z47V 44.65 47 49.35 MMSZ5262BW Z51V 48.45 51 53.55 MMSZ5263BW Z56V 53.20 56 58.80 MMSZ5264BW Z60V 57.00 60 63.00 MMSZ5265BW Z62V 58.90 62 65.10 MMSZ5266BW Z68V 64.60 68 71.40 MMSZ5267BW Z75V 71.25 75 78.75 VF Forward Voltage = 900mV Maximum @ IF = 10 mA for all types Notes: 1. 2. 3. IZT (mA) The zener voltage (VZ) is tested under pulse condition of 1mS. The device numbers listed have a standard tolerance on the nominal zener voltage of 5%. The zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an rms value equal to 10% of the dc zener current (IZT or IZK) is superimposed to IZT or IZK. For detailed information on price, availability and delivery of nominal zener voltages between the voltages shown and tighter voltage tolerances, contact your nearest Tak Cheong Electronics representative. Nov. 2008 Release, Revision D Page 2 TAK CHEONG (R) SEMICONDUCTOR RATING AND CHARACTERISTIC CURVES Fig.2 EFFECT OF ZENER VOLTAGE ON ZENER IMPEDANCE Fig.1 TYPICAL FORWARD VOLTAGE POWER PASSIPATION,mW 600 500 400 300 200 100 0 0 25 50 75 100 125 150 175 200 TEMPERATURE [ ] Fig.3 POWER DISSIPATION VS. AMBIENT TEMP. Fig.5 ZENER BREAKDOWN CHARACTERISTICS Fig.4 TYPICAL CAPACITANCE Fig.6 ZENER BREAKDOWN CHARACTERISTICS Nov. 2008 Release, Revision D Page 3 TAK CHEONG (R) SEMICONDUCTOR Fig.7 TYPICAL LEAKGE CURRENT Flat Lead SOD-123 Package Outline Note: Dimensions are exclusive of Burrs, Mold Flash & Tie Bar extrusions. Nov. 2008 Release, Revision D Page 4 TAK CHEONG (R) DISC LA I MER NOTIC E NOTICE The information presented in this document is for reference only. Tak Cheong reserves the right to make changes without notice for the specification of the products displayed herein. The product listed herein is designed to be used with ordinary electronic equipment or devices, and not designed to be used with equipment or devices which require high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), Tak Cheong Semiconductor Co., Ltd., or anyone on its behalf, assumes no responsibility or liability for any damagers resulting from such improper use of sale. This publication supersedes & replaces all information reviously supplied. For additional information, please visit our website http://www.takcheong.com, or consult your nearest Tak Cheong's sales office for further assistance. Number: DB-100 April 14, 2008 / A