- 1 -
Apr. 2010
SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS, INFORMATION AND
SPECIFICATIONS WITHOUT NOTICE.
Products and specifications discussed herein are for reference purposes only. All information discussed
herein is provided on an "AS IS" basis, without warranties of any kind.
This document and all information discussed herein remain the sole and exclusive property of Samsung
Electronics. No license of any patent, copyright, mask work, trademark or any other intellectual property
right is granted by one party to the other party under this document, by implication, estoppel or other-
wise.
Samsung products are not intended for use in life support, critical care, medical, safety equipment, or
similar applications where product failure could result in loss of life or personal or physical harm, or any
military or defense application, or any governmental procurement to which special terms or provisions
may apply.
For updates or additional information about Samsung products, contact your nearest Samsung office.
All brand names, trademarks and registered trademarks belong to their respective owners.
ⓒ2010 Samsung Electronics Co., Ltd. All rights reserved.
Product Guide
Consumer Memory
- 2 -
Product Guide Consumer Memory
Apr. 2010
1. CONSUMER MEMORY ORDERING INFORMATION
3. Product
4. Density & Refresh
5. Organization
6. Bank
7. Interface ( VDD, VDDQ)
9. Package Type
8. Revision
1. SAMSUNG Memory : K
2. DRAM : 4
Revision
Bank
Organization
Density & Refresh
Product
DRAM
SAMSUNG Memory
Interface (VDD, VDDQ)
Package Type
Temperature & Power
K 4 X X X X X X X X - X X X X
1 2 3 4 5 6 7 8 9 10 11
Speed
10. Temperature & Power
S:SDRAM
H:DDR SDRAM
T:DDR2 SDRAM
B:DDR3 SDRAM
D:GDDR
J:GDDR3
64 :64Mb, 4K/64ms
28 :128Mb, 4K/64ms
56 :256Mb, 8K/64ms
51 :512Mb, 8K/64ms
1G :1Gb, 8K/64ms
2G :2Gb, 8K/64ms
10 :1Gb, 8K/32ms
04 :x4
08 :x8
16 :x16
32 :x32
31 :x32 (2CS)
2:2 Banks
3:4 Banks
4:8 Banks
2:LVTTL (3.3V, 3.3V)
8:SSTL_2 (2.5V, 2.5V)
Q:SSTL_18 (1.8V, 1.8V)
6:SSTL_15 (1.5V, 1.5V)
K:POD_18 (1.8V, 1.8V)
M:1st Gen. H :9th Gen.
A:2nd Gen. I :10th Gen.
B:3rd Gen. J :11th Gen.
C:4th Gen. K :12th Gen.
D:5th Gen. L :13th Gen.
E:6th Gen. N :14th Gen.
F:7th Gen. O :15th Gen.
G:8th Gen. S :19th Gen.
U:TSOPII (Lead-free)
100TQFP(Lead-free) only for 128Mb GDDR
Z:FBGA (Lead-free)
V:144FBGA (Lead-free) only for 128Mb GDDR
L:TSOPII (Lead-free & Halogen-free)
H:FBGA (Lead-free & Halogen-free)
F:FBGA(Lead-free & Halogen-free) for 64Mb DDR, 128Mb GDDR
M:FBGA DDP (Lead-free & Halogen-free)
B:FBGA FLIP-CHIP (Lead-free & Halogen-free)
C:Commercial Temp. & Normal Power
L:Commercial Temp. & Low Power
I:Industrial Temp. & Normal Power
P:Industrial Temp. & Low Power
D:Industrial Temp. & Super Low Power
Q:Commercial Temp. DDR3+ (Gapless, BL4)
- 3 -
Product Guide Consumer Memory
Apr. 2010
11. Speed
Revision
Bank
Organization
Density & Refresh
Product
DRAM
SAMSUNG Memory
Interface (VDD, VDDQ)
Package Type
Temperature & Power
K 4 X X X X X X X X - X X X X
1 2 3 4 5 6 7 8 9 10 11
Speed
75 :7.5ns, PC133 (133MHz CL=3)
60 :6.0ns (166MHz CL=3)
50 :5.0ns (200MHz CL=3)
40 :4.0ns (250MHz CL=3)
B0 :DDR266 (133MHz @ CL=2.5, tRCD=3, tRP=3)
B3 :DDR333 (166MHz @ CL=2.5, tRCD=3, tRP=3)
CC :DDR400 (200MHz @ CL=3, tRCD=3, tRP=3)
E6 :DDR2-667 (333MHz @ CL=5, tRCD=5, tRP=5)
E7 :DDR2-800 (400MHz @ CL=5, tRCD=5, tRP=5)
F7 :DDR2/3-800 (400MHz @ CL=6, tRCD=6, tRP=6)
F8 :DDR2/3-1066 (533MHz @ CL=7, tRCD=7, tRP=7)
H9 :DDR3-1333 (667MHz @ CL=9, tRCD=9, tRP=9)
K0 :DDR3-1600 (800MHz @ CL=11, tRCD=11, tRP=11)
7A :GDDR3-2.6Gbps (0.77ns)
08 :GDDR3-2.4Gbps (0.8ns)
1A :GDDR3-2.0Gbps (1.0ns)
12 :GDDR3-1.6Gbps (1.25ns)
14 :GDDR3-1.4Gbps (1.4ns)
- 4 -
Product Guide Consumer Memory
Apr. 2010
2. Commercial Temperature Consumer DRAM Component Product Guide
2.1 SDRAM
NOTE : 1. 128Mb K-die SDR and 256Mb J-die SDR DRAMs support Lead-free & Halogen-free package with Lead-free package code(-U)
2.2 DDR SDRAM
NOTE : 1. VDD/VDDQ SPEC for 128Mb DDR L-die
2. VDD/VDDQ SPEC for 256/512Mb DDR
Density Bank Part Number Package & Power,
Temp. (-C/-L) & Speed Org. Interface Refresh Power (V) Package Avail.
64Mb N-die 4Banks K4S640832N LC(L)75 8M x 8 LVTTL 4K/64ms 3.3±0.3V 54pin TSOP(II) Now
K4S641632N LC(L)50/C(L)60/C(L)75 4M x 16
128Mb K-die 4Banks K4S280832K U*1C(L)75 16M x 8 LVTTL 4K/64ms 3.3±0.3V 54pin TSOP(II)*1 Now
K4S281632K UC(L)50/C(L)60/C(L)75 8M x 16
128Mb O-die 4Banks K4S280832O LC(L)75 16M x 8 LVTTL 4K/64ms 3.3±0.3V 54pin TSOP(II) 3Q’10
K4S281632O LC(L)50/C(L)60/C(L)75 8M x 16
256Mb J-die 4Banks
K4S560432J U*1C(L)75 64M x 4
LVTTL 8K/64ms 3.3±0.3V 54pin TSOP(II)*1 Now
K4S560832J UC(L)75 32M x 8
K4S561632J UC(L)60/C(L)75 16M x 16
256Mb N-die 4Banks
K4S560432N LC(L)75 64M x 4
LVTTL 8K/64ms 3.3±0.3V 54pin TSOP(II) NowK4S560832N LC(L)75 32M x 8
K4S561632N LC(L)60/C(L)75 16M x 16
Density Bank Part Number Package & Power,
Temp. (-C/-L) & Speed Org. Interface Refresh Power (V) Package Avail.
64Mb N-die 4Banks K4H641638N LC(L)CC 4M x 16 SSTL_2 4K/64m 2.5±0.2V 66pinTSOPII Now
FC(L)CC 60ball FBGA
64Mb Q-die 4Banks K4H641638Q LC(L)CC 4M x 16 SSTL_2 4K/64m 2.5±0.2V 66pinTSOPII 2Q’10
128Mb L-die 4Banks K4H281638L LC(L)/C(L)CC 8M x 16 SSTL_2 4K/64m 2.5±0.2V*1 66pinTSOPII Now
128Mb O-die 4Banks K4H281638O LC(L)CC/C(L)B3 8M x 16 SSTL_2 4K/64m 2.5±0.2V*1 66pinTSOPII 2Q’10
256Mb J-die 4Banks
K4H560438J LC(L)B3/C(L)B0 64M x 4
SSTL_2 8K/64m 2.5±0.2V*2 66pinTSOPII NowK4H560838J LC(L)CC/C(L)B3 32M x 8
K4H561638J LC(L)CC/C(L)B3 16M x 16
256Mb N-die 4Banks
K4H560438N LC(L)B3/C(L)B0 64M x 4
SSTL_2 8K/64m 2.5±0.2V*2 66pinTSOPII NowK4H560838N LC(L)CC/C(L)B3 32M x 8
K4H561638N LC(L)CC/C(L)B3 16M x 16
512Mb F-die 4Banks
K4H510438F LC(L)B3/C(L)B0 128M x 4
SSTL_2 8K/64m 2.5±0.2V*2
66pinTSOPII
Now
HC(L)CC/C(L)B3 60ball FBGA
K4H510838F LC(L)CC/C(L)B3 64M x 8 66pinTSOPII
HC(L)CC/C(L)B3 60ball FBGA
K4H511638F LC(L)CC/C(L)B3 32M x 16 66pinTSOPII
HC(L)CC/C(L)B3 60ball FBGA
512Mb G-die 4Banks
K4H510438G LC(L)B3/C(L)B0 128M x 4
SSTL_2 8K/64m 2.5±0.2V*2
66pinTSOPII
Now
HC(L)CC/C(L)B3 60ball FBGA
K4H510838G LC(L)CC/C(L)B3 64M x 8 66pinTSOPII
HC(L)CC/C(L)B3 60ball FBGA
K4H511638G LC(L)CC/C(L)B3 32M x 16 66pinTSOPII
HC(L)CC/C(L)B3 60ball FBGA
DDR500 DDR400
VDD/VDDQ 2.5V ± 0.125V 2.5V ± 0.2V
DDR400 DDR333/266
VDD/VDDQ 2.6V ± 0.1V 2.5V ± 0.2V
- 5 -
Product Guide Consumer Memory
Apr. 2010
2.3 DDR2 SDRAM
NOTE : 1. 128Mb I-die DDR2 84ball FBGA supports Halogen-free package
2.4 DDR3 SDRAM
2.5 DDR3+ SDRAM
NOTE : For more details about product specifications or technical files, please contact us "semiconductor@samsung.com"
Density Banks Part Number Package & Power,
Temp. (-C/-L) & Speed Org. Interface Refresh Power (V) Package Avail.
128Mb O-die 4Banks K4T28163QO HCF8/E7/F7/E6 8M x 16 SSTL_18 4K/64m 1.8V±0.1V 84ball FBGA Now
256Mb I-die 4Banks K4T56163QI Z*1C(L)E7/F7/E6/D5/CC 16M x 16 SSTL_18 8K/64m 1.8V±0.1V 84ball FBGA Now
256Mb N-die 4Banks K4T56163QN HCF8/E7/F7/E6 16M x 16 SSTL_18 8K/64m 1.8V±0.1V 84ball FBGA Now
512Mb G-die 4Banks K4T51083QG HC(L)F8/E7/F7/E6 64M x 8 SSTL_18 8K/64m 1.8V±0.1V 60ball FBGA Now
K4T51163QG HC(L)F8/E7/F7/E6 32M x 16 84ball FBGA
512Mb I-die 4Banks
K4T51043QI HC(L)E7/F7/E6 128M x 4
SSTL_18 8K/64m 1.8V±0.1V 60ball FBGA Now
K4T51083QI HC(L)E7/F7/E6 64M x 8
K4T51163QI HC(L)F8/E7/F7/E6 32M x 16 84ball FBGA Now
1Gb E-die 8Banks K4T1G084QE HC(L)F8/E7/F7/E6 128M x 8 SSTL_18 8K/64m 1.8V±0.1V 60ball FBGA Now
K4T1G164QE HC(L)F8/E7/F7/E6 64M x 16 84ball FBGA
1Gb F-die 8Banks K4T1G084QF BC(L)F8/E7/F7/E6 128M x 8 SSTL_18 8K/64m 1.8V±0.1V 60ball FBGA Now
K4T1G164QF BC(L)F8/E7/F7/E6 64M x 16 84ball FBGA
Density Banks Part Number Package & Power,
Temp. (-C/-L) & Speed Org. Interface Refresh Power (V) PKG Avail.
1Gb E-die 8Banks K4B1G0846E HC(L)F7/F8/H9/K0 128M x 8 SSTL_15 8K/64m 1.5V±0.075V 78ball FBGA Now
K4B1G1646E HC(L)F7/F8/H9/K0 64M x 16 96ball FBGA
2Gb B-die 8Banks K4B2G0846B HC(L)F7/F8/H9/K0 256M x 8 SSTL_15 8K/64m 1.5V±0.075V 78ball FBGA Now
K4B2G1646B HC(L)F7/F8/H9/K0 128M x 16 96ball FBGA
2Gb C-die 8Banks K4B2G0846C HC(L)F8/H9/K0 256M x 8 SSTL_15 8K/64m 1.5V±0.075V 78ball FBGA Now
K4B2G1646C HC(L)F8/H9/K0 128M x 16 96ball FBGA
Density Banks Part Number Package & Power,
Temp. (-C/-L) & Speed Org. Interface Refresh Power (V) PKG Avail.
1Gb E-die 8Banks K4B1G1646E HQH9 64M x 16 SSTL_15 8K/64m 1.5V±0.075V 96ball FBGA Now
2Gb C-die 8Banks K4B2G1646C HQH9 128M x 16 SSTL_15 8K/64m 1.5V±0.075V 96ball FBGA Now
- 6 -
Product Guide Consumer Memory
Apr. 2010
2.6 GDDR SDRAM
NOTE : 1. 128Mb K-die GDDR TQFP supports Lead-free & Halogen-free package with Lead-free package code(-U)
2.7 GDDR3 SDRAM
Density Banks Part Number Package & Power,
Temp. (-C/-L) & Speed Org. Interface Refresh Power (V) PKG Avail.
128Mb K-die 4Banks K4D263238K
FC40/50
4M x 32 SSTL_2 4K/32m 2.5V±5%
Lead-free & Halogen-
free
144ball FBGA
3Q. ’10
EOL
VC40/50 Lead-free
144ball FBGA
U*1C40/50
Lead-free & Halogen-
free
100pin TQFP*1
Density Banks Part Number Package & Power,
Temp. (-C/-L) & Speed Org. Interface Refresh Power (V) PKG Avail.
1Gb E-die 8Banks K4J10324KE HC7A/08/1A/12/14 32M x 32 SSTL_2 8K/32m 1.8V±0.1V 136ball FBGA Now
- 7 -
Product Guide Consumer Memory
Apr. 2010
3. Industrial Temperature Consumer DRAM Component Product Guide
3.1 SDRAM
NOTE : 1. 128Mb K-die SDR and 256Mb J-die SDR DRAMs support Lead-free & Halogen-free package with Lead-free package code(-U)
3.2 DDR SDRAM
NOTE : 1. VDD/VDDQ SPEC for 256/512Mb DDR
3.3 DDR2 SDRAM
3.4 DDR3 SDRAM
Density Bank Part Number Package & Power,
Temp. & Speed Org. Interface Refresh Power (V) Package Avail.
64Mb N-die 4Banks KS641632N LI(P)60/I(P)75 4M x 16 LVTTL 4K/64ms 3.3±0.3V 54pin TSOP(II) Now
128Mb K-die 4Banks K4S281632K U*1I(P)60/I(P)75 8M x 16 LVTTL 4K/64ms 3.3±0.3V 54pin TSOP(II)*1 Now
128Mb O-die 4Banks K4S281632O LI(P)60/I(P)75 8M x 16 LVTTL 4K/64ms 3.3±0.3V 54pin TSOP(II) 3Q ’10
256Mb J-die 4Banks K4S561632J U*1I(P)60/I(P)75 16M x 16 LVTTL 8K/64ms 3.3±0.3V 54pin TSOP(II)*1 Now
256Mb N-die 4Banks K4S561632N LI(P)60/I(P)75 16M x 16 LVTTL 8K/64ms 3.3±0.3V 54pin TSOP(II) 2Q ’10
Density Bank Part Number Package & Power,
Temp. & Speed Org. Interface Refresh Power (V) Package Avail.
512Mb F-die 4Banks
K4H510838F LI(P)B3 64M x 8
SSTL_2 8K/64m 2.5±0.2V*1
66pinTSOPII
Now
K4H511638F LI(P)B3 32M x 16 66pinTSOPII
HI(P)B3 60ball FBGA
512Mb G-die 4Banks K4H511638G LI(P)CC/B3 32M x 16 SSTL_2 8K/64m 2.5±0.2V*1 66pinTSOPII Now
HI(P)CC/B3 60ball FBGA
DDR400 DDR333/266
VDD/VDDQ 2.6V ± 0.1V 2.5V ± 0.2V
Density Bank Part Number Package & Power,
Temp. & Speed Org. Interface Refresh Power (V) Package Avail.
512Mb G-die 4Banks K4T51163QG HI(P)F7/I(P)E6/I(P)D5/
I(P)CC 32M x 16 SSTL_18 8K/64m 1.8V±0.1V 84ball FBGA Now
K4T51163QG HDE6
512Mb I-die 4Banks K4T51163QI HI(P)E7/I(P)F7/I(P)E6 32M x 16 SSTL_18 8K/64m 1.8V±0.1V 84ball FBGA Now
K4T51163QI HDE7/E6
1Gb E-die 8Banks K4T1G084QE HI(P)F7/I(P)E6 128M x 8 SSTL_18 8K/64m 1.8V ± 0.1V 60ball FBGA Now
K4T1G164QE HI(P)F7/I(P)E6 64M x 16 84ball FBGA Now
1Gb F-die 8Banks K4T1G084QF BI(P)F7/I(P)E6 128M x 8 SSTL_18 8K/64m 1.8V ± 0.1V 60ball FBGA 2Q ’10
K4T1G164QF BI(P)F7/I(P)E6 64M x 16 84ball FBGA
Density Bank Part Number Package & Power,
Temp. & Speed Org. Interface Refresh Power (V) Package Avail.
1Gb E-die 8Banks K4B1G1646E HI(P)H9 64M x 16 SSTL_15 8K/64m 1.5V±0.075V 96ball FBGA Now
2Gb B-die 8Banks K4B2G1646B HI(P)H9 128M x 16 SSTL_15 8K/64m 1.5V±0.075V 96ball FBGA Now
2Gb C-die 8Banks K4B2G1646C HI(P)H9 128M x 16 SSTL_15 8K/64m 1.5V±0.075V 96ball FBGA 2Q ’10
- 8 -
Product Guide Consumer Memory
Apr. 2010
4. Package Dimension
54Pin TSOP(II) (for SDRAM)
#1
(1.50)
(1.50)
#54 #28
#27
10.16 ± 0.10
(R 0.15)
22.22 ± 0.10
0.210 ± 0.05
0.665 ± 0.05
(R 0.15)
(0.71) [0.80 ± 0.08]
0.80TYP
0.35 +0.10
- 0.05
(10°)
1.00 ± 0.10
0.05 MIN
(10°)
1.20 MAX
0.10 MAX
0.075 MAX
[
[
(10.76)
0.125 +0.075
- 0.035
(10°)
(10°)
11.76 ± 0.20
(0.80)
(0.80)
(0.50)
(4°)
0.45 ~ 0.75
(0° ∼ 8°)
0.25TYP
(R 0.25)
(R 0.25)
(0.50)
NOTE
1. ( ) IS REFERENCE
2. [ ] IS ASS’Y OUT QUALITY
Units : Millimeters
66Pin TSOP(II) (for DDR)
#1
(1.50)
(1.50)
#66 #34
#33
10.16 ± 0.10
(R 0.15)
22.22 ± 0.10
0.210 ± 0.05
0.665 ± 0.05
(R 0.15)
(0.71) [0.65 ± 0.08]
0.65TYP
0.30
(10°)
(10°)
(10.76)
0.125 +0.075
- 0.035
(10°)
(10°)
11.76 ± 0.20
(0.80)
(0.80)
(0.50)
(0.50)
(4°)
0.45 ~ 0.75
(0° ∼ 8°)
0.25TYP
(R 0.25)
(R 0.25)
± 0.08
1.00 ± 0.10
0.05 MIN
1.20 MAX
0.10 MAX
0.075 MAX
[
[
NOTE
1. ( ) IS REFERENCE
2. [ ] IS ASS’Y OUT QUALITY
Detail A Detail B
Detail BDetail A
0.25 ± 0.08
Units : Millimeters
- 9 -
Product Guide Consumer Memory
Apr. 2010
60Ball FBGA (For DDR 64Mb N-die)
8.0 0 ± 0.10
12.00 ± 0.10
0.10 Max
0.32 ± 0.05
1.10 ± 0.10
8.00 ± 0.10
A
B
C
D
E
F
G
H
J
K
L
M
0.80
0.50
1.00 x 11 = 11.00
12.00 ± 0.10
60 - ∅ 0.45 SOLDER BALL
1.00
#A1 1.60
#A1 MARK
∅0.20 MAB
0.80 x 8 = 6.40
A
123456789
(Post Reflow 0.50 ± 0.05)
Units : Millimeters
(Datum A)
(Datum B)
B
TOP VIEW BOTTOM VIEW
60Ball FBGA (For DDR 512Mb F-die, 512Mb G-die)
TOP VIEW BOTTOM VIEW
12.00 ± 0.10
9.00 ± 0.10
#A1
1.00MAX
1.20 MAX
0.45 ± 0.05
WINDOW MOLD AREA
Units : Millimeters
9.00 ± 0.10
0.80 6.40
1.60
x8 =
B
5.50
1.00 11.00
x11=
A
(Datum B)
12.00 ± 0.10
A
B
C
D
E
F
G
H
J
K
L
M
0.50
60-∅0.45 ± 0.05
0.20 MAB
0.80 x2= 1.600.80 x2 =
#A1 MARK(option)
1.00
0.80
4-CORNER MARK(option)
(Datum A)
98765432 1
(0.90)(0.90)
(1.80)
0.80 x4 =
0.50
3.20
- 10 -
Product Guide Consumer Memory
Apr. 2010
TOP VIEW BOTTOM VIEW
60Ball FBGA (For DDR2 x8)
9.50 ± 0.10
7.50 ± 0.10
0.50 ± 0.05
0.10MAX
0.35±0.05
1.10±0.10
#A1
9.50 ± 0.10
0.80
7.50 ± 0.10
0.80 1.60
(0.95)
(1.90)
# A1 INDEX MARK
(Datum A)
(Datum B)
MOLDING AREA A
B
123456789
0.80 x 10 = 8.00
B
C
D
E
F
G
H
J
K
L
A
0.80 x 8 = 6.40
60-∅0.45 Solder ball
0.2 MAB
(Post reflow 0.50 ± 0.05)
Units : Millimeters
TOP VIEW BOTTOM VIEW
84Ball FBGA (For DDR2 128Mb O-die/256Mb N-die/512Mb G-die, I-die/1Gb E-die)
0.50±0.05
0.10MAX
0.35±0.05
1.10±0.10
12.50 ± 0.10
7.50 ± 0.10
#A1
12.50 ± 0.10
0.80
7.50 ± 0.10
123456789
3.20
0.80 1.60
(0.95)
(1.90)
5.60
# A1 INDEX MARK
(Datum A)
(Datum B)
MOLDING AREA
A
B
0.80 x 14 = 11.20
0.80 x 8 = 6.40
B
C
D
E
F
G
H
K
L
N
A
J
M
P
R
84-∅0.45 Solder ball
0.2 MAB
(Post reflow 0.50 ± 0.05)
Units : Millimeters
- 11 -
Product Guide Consumer Memory
Apr. 2010
TOP VIEW BOTTOM VIEW
60Ball FBGA (for DDR2 1Gb F-die x8) Units : Millimeters
(0.30)
# A1 INDEX MARK
(0.60)
9.50 ± 0.10
0.80 x 10 = 8.00
0.80
7.50 ± 0.10
1.60
0.80 x 8 = 6. 40
4.00
0.80
A
B
A
B
C
D
E
F
H
J
K
L
G
3.20
0.80
987654321
60-∅0.48 Solder ball
0.2 MAB
(Post reflow 0.50 ± 0.05)
MOLDING AREA
(Datum A)
(Datum B)
9.50 ± 0.10
7.50 ± 0.10
#A1
0.37±0.05
1.10±0.10
0.10MAX
TOP VIEW BOTTOM VIEW
84Ball FBGA (for DDR2 1Gb F-die x16) Units : Millimeters
(0.30)
# A1 INDEX MARK
(0.60)
12.50 ± 0.10
0.80 x 14 = 11.20
0.80
7.50 ± 0.10
1.60
0.80 x 8 = 6. 40
5.60
0.80
A
B
A
B
C
D
E
F
H
J
K
L
G
3.20
0.80
987654321
84-∅0.48 Solder ball
0.2 MAB
(Post reflow 0.50 ± 0.05)
MOLDING AREA
(Datum A)
(Datum B)
M
N
P
R
12.50 ± 0.10
7.50 ± 0.10
#A1
0.37±0.05
1.10±0.10
0.10MAX
- 12 -
Product Guide Consumer Memory
Apr. 2010
TOP VIEW BOTTOM VIEW
84Ball FBGA (For DDR2 256Mb I-die) Units : Millimeters
B
C
D
E
F
G
H
J
K
L
A
9.00 ± 0.10
6.40
0.80 1.60
# A1 INDEX MARK
0.80 x 8 =
123456789
3.20
13.00 ± 0.10
0.80
0.80
0.80
11.20x 14 =
5.60
(0.95)
(1.90)
84-∅0.45 Solder ball
0.2 MAB
(Post reflow 0.50 ± 0.05)
(Datum A)
(Datum B)
A
B
MOLDING AREA
M
N
P
R
9.00 ± 0.10
13.00 ± 0.10
#A1
0.10MAX
0.35 ± 0.05
1.10 ± 0.10
0.10MAX
1.10 ± 0.10
#A1 7.50 ± 0.10
11.00 ± 0.10
0.35 ± 0.05
TOP VIEW
A
B
C
D
E
F
G
H
M
N
7.50 ± 0.10
0.80 x 12 = 9.60
3.20
0.80
4.80
78 - ∅0.45 Solder ball
0.2 ABM
(Datum B)
(Datum A) 1.60
MOLDING AREA
#A1 INDEX MARK
B
A
BOTTOM VIEW
11.00 ± 0.10
J
K
L
0.80 0.80
(Post Reflow ∅0.50 ± 0.05)
(0.95)
(1.90)
876543219
78Ball FBGA (for DDR3 1Gb x8 E-die / DDR3 2Gb x8 C-die) Units : Millimeters
- 13 -
Product Guide Consumer Memory
Apr. 2010
A
B
C
D
E
F
G
H
J
L
M
N
P
R
T
7.50 ± 0.10
3.20
0.80
6.00
(Datum B)
(Datum A)
0.10MAX
1.10 ± 0.10
#A1 1.60
7.50 ± 0.10
13.30 ± 0.10
0.35 ± 0.05
#A1 INDEX MARK
TOP VIEW
13.30 ± 0.10
K
0.80 x 15 = 12.00
B
A
0.80 0.40
96 - ∅0.45 Solder ball
0.2 ABM
MOLDING AREA
(Post Reflow ∅0.50 ± 0.05)
(0.95)
(1.90)
BOTTOM VIEW
876543219
96Ball FBGA (for DDR3 1Gb x16 E-die / DDR3+ 1Gb x16 E-die / DDR3 2Gb x16 C-die) Units : Millimeters
0.10MAX
1.10
±
0.10
#A1 9.00
±
0.10
11.50 ± 0.10
0.35
±
0.05
TOP VIEW
A
B
C
D
E
F
G
H
M
N
9.00
±
0.10
0.80 x 12 = 9.60
0.80 x 8 = 6.40
3.20
0.80
4.80
78 -
∅
0.45 Solder ball
0.2 ABM
(Datum B)
(Datum A)
876543219
1.60
MOLDING AREA
#A1 INDEX MARK
B
A
BOTTOM VIEW
11.50 ± 0.10
J
K
L
0.80 0.80
(Post Reflow
∅
0.50
±
0.05)
(0.95)
(1.90)
78Ball FBGA (for DDR3 2Gb x8 B-die) Units : Millimeters
- 14 -
Product Guide Consumer Memory
Apr. 2010
TOP VIEW BOTTOM VIEW
96Ball FBGA (for DDR3 2Gb x16 B-die) Units : Millimeters
0.10MAX
1.10 ± 0.10
#A1 9.00 ± 0.10
13.30 ± 0.10
0.35 ± 0.05
A
B
C
D
E
F
G
H
J
L
M
N
P
R
T
9.00 ± 0.10
3.20
0.80
6.00
(Datum B)
(Datum A)
876543219
1.60
#A1 INDEX MARK
13.30 ± 0.10
K
0.80 x 15 = 12.00
0.80 x 8 = 6.40
B
A
0.80 0.40
96 - ∅0.45 Solder ball
0.2 ABM
MOLDING AREA
(Post Reflow ∅0.50 ± 0.05)
(0.95)
(1.90)
TOP VIEW BOTTOM VIEW
136Ball FBGA (for GDDR3 1Gb E-die)
A
B
C
D
E
F
H
J
K
L
M
N
P
R
G
T
V
876543219101112
10.00 ± 0.10
0.80 2.00
4.40
0.80 x 11 = 8.80
14.00 ± 0.10
6.40
0.80 x 16 = 12.80
A
B
# A1 INDEX MARK
(Datum B)
MOLDING AREA
0.95
1.90
136-
∅
0.45 Solder ball
0.2 MAB
(Post reflow 0.50
±
0.05)
(Datum A)
0.800.80
10.00 ± 0.10
14.00 ± 0.10
#A1
0.10MAX
0.35 ± 0.05
1.10 ± 0.10
Units : Millimeters
- 15 -
Product Guide Consumer Memory
Apr. 2010
For further information,
semiconductor@samsung.com