MIC94052/53 MIC94052/94053 84m P-Channel MOSFET in SC-70-6 General Description Features The MIC94052/94053 are low on-resistance, 84m(max) P-channel MOSFETs. They are housed in a TeenyTM SC70-6 package. Designed for high-side switch applications where space is critical, the MIC94052/3 exhibit a typical on-resistance of 70m at 4.5V gate-to-source voltage. The devices operate down to 1.8V gate-to-source voltage. Their operating voltage range makes the MIC94052/3 ideal for Li Ion applications as well as other sub-5V load switch applications. The MIC94053 is an option that includes an internal gate pullup resistor. The pull-up resistor ensures that the P-channel MOSFET is OFF until actively pulled down. Integrating the pull-up resistor saves valuable board space and reduces component placement cost. The MIC94052/3 have a junction temperature range of -40C to +150C. * 1.8V to 5.5V input voltage range * Low on-resistance P-channel MOSFET: 70m at VGS = 4.5V (typ) 2A continuous current * VGS pull-up resistor (MIC94053) * TeenyTM SC-70-6 package * -40C to +150C junction temperature range Applications * Load switch in portable applications: Cellular phones PDAs MP3 players Notebook PCs Barcode scanners Ordering Information Part Number Standard Marking Pb-Free Gate-Source Pull Up Junction Temp Range Package Marking* MIC94052BC6 P52 MIC94052YC6 P52 NO -40C to +150C SC-70-6 MIC94053BC6 P53 MIC94053YC6 P53 YES -40C to +150C SC-70-6 * Under bar symbol may not be to scale. Typical Application MIC94053 VIN 4 S OFF (High) ON (Low) 3 G D 1, 2, 5, 6 LOAD Load Switch Application Micrel, Inc. * 2180 Fortune Drive * San Jose, CA 95131 * USA * tel + 1 (408) 944-0800 * fax + 1 (408) 474-1000 * http://www.micrel.com June 2008 1 M9999-060508 MIC94052/53 Micrel, Inc. Pin Configuration G 3 4 S D 2 5 D D 1 6 D G 3 D 2 D 1 4 S 5 D 6 D MIC94053 SC-70-6 (C6) MIC94052 SC-70-6 (C6) SN - Pb Pb -Free P53 P53 Package Marking - Top View Pin Description Pin Number Pin Name 1, 2, 5, 6 D Drain. Ensure that all drain pins are connected together to optimize RDS(ON) performance. 3 G Gate 4 S Source M9999-060508 Pin Function 2 June 2008 MIC94052/53 Absolute Maximum Ratings (Note 1) Operating Ratings (Note 2) Drain-Source Voltage (VDS) .......................................... -6V Gate-Source Voltage (VGS) ........................................... -6V Continuous Drain Current (ID) Note 3 TA = 25C ................................................................... 2A TA = 85C ................................................................ 1.4A Pulsed Drain Current (IDP) Note 3 ................................ 6A Continous Diode Current (IS) Note 7........................ -50mA Power Dissipation Note 3 SC-70-6 lead (TA = 85C) .................................... 270mW Ambient Storage Temperature (TS) .......... -55C to +150C ESD Rating Note 4 Input Voltage Range .........................................1.8V to 5.5V Junction Temperature Range (TJ) ............ -40C to +150C Package Thermal Impedance Note 3 JA SC-70-6 lead .............................................. 240C/W Electrical Characteristics TA = 25C, unless otherwise specified. Bold values indicate -40C TJ +150C. Symbol Parameter Condition Min Typ Max Units Static VGS(th) Gate Threshold Voltage Gate Body Leakage (MIC94052 only) VDS = VGS, ID = -250A -0.5 IGSS VDS = 0V, VGS = -5.5V RGS Gate-Source Resistance (MIC94053 only) VDS = 0V, VGS = -5.5V 250 IDSS Zero Gate Voltage Drain Current RDS(ON) Drain-Source On-Resistance Note 8 VDS = -5.5V, VGS = 0V TJ = +85C Dynamic, Note 6 td(on) Turn-On Delay Time tr Turn-On Rise Time td(off) Turn-Off Delay Time tf Turn-Off Fall Time 400 -1.2 V 100 nA 550 k -1 -5 A A 84 110 130 180 m m m m VGS = -4.5V, IDS = -100 mA VGS = -3.6V, IDS = -100 mA VGS = -2.5V, IDS = -100 mA VGS = -1.8V, IDS = -100 mA 70 76 92 125 VDD = -5V, ID = -0.5A, VGS = -4.5V, RGEN = 50 15 ns VDD = -5V, ID = -0.5A, VGS = -4.5V, RGEN = 50 15 ns VDD = -5V, ID = -0.5A, VGS = -4.5V, RGEN = 50 60 ns VDD = -5V, ID = -0.5A, VGS = -4.5V, RGEN = 50 20 ns Note 1. TA = 25C unless otherwise noted. Absolute maximum ratings indicate limits beyond which damage to the component may occur. Electrical specifications do not apply when operating the device outside of its operating ratings. Note 2. This device is not guaranteed to operate beyond its specified operating rating. Note 3. Mounted on 1 square-inch pad of 2 oz. copper. Note 4. IC devices are inherently ESD sensitive. Handling precautions required. Note 5. Pulse test; pulse width = 300s, duty cycle = 2%. Note 6. Guaranteed by design. Note 7. Body diode current conduction is not recommended. Note 8. Ensure that all drain pins are connected together to optimize RDS(ON) perfomance. June 2008 3 M9999-060508 MIC94052/53 Micrel, Inc. Typical Characteristics V TH Variance vs. Temperature 5 0.7 4 0.5 ID (A) VTH (V) 0.6 0.4 0.3 0.2 1.3 3V VG S 4V VG S RDS(ON) (NORMALIZED) 0.8 RDS(ON) Variance VDS vs. ID 1.5VG S 3 2 1 0.1 I = -250A D 0 0 0 -50 -25 0 25 50 75 100 125 150 TEMPERATURE (C) On-Resistance vs. V GS 0.5 1 2 3 VDS (V) 4 5 vs. Temperature 1.2 1.1 1 0.9 0.8 VG S = -4.5V I = -1.8A D 0.7 -50 -25 0 25 50 75 100 125 150 TEMPERATURE (C) On-Resistance vs. I D 400 0.4 0.35 0.3 0.25 2.0A 0.2 0.15 0.1 0.05 0 1.8V V GS 300 RDS(ON) (m) RDS(ON) (m) 0.45 0.5A 0 M9999-060508 2 VGS(V) 4 6 200 2.5V V GS 100 0 4.5V VG S 0 1 3.3V VG S 2 3 CURRENT (A) 4 4 5 June 2008 MIC94052/53 Package Information 0.65 (0.0256) BSC 2.40 (0.094) 1.80 (0.071) 1.35 (0.053) 1.15 (0.045) 2.20 (0.087) 1.80 (0.071) DIMENSIONS: MM (INCH) 1.00 (0.039) 0.80 (0.032) 0.30 (0.012) 0.15 (0.006) 1.10 (0.043) 0.80 (0.032) 0.10 (0.004) 0.00 (0.000) 0.18 (0.007) 0.10 (0.004) 0.30 (0.012) 0.10 (0.004) SC-70-6 Pin (C6) MICREL INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com This information furnished by Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Pr Micrel for any damages resulting from such use or sale. (c) 2002 Micrel Incorporated June 2008 5 M9999-060508