SPEC NO: KDA0084 REV NO: V.1 DATE: SEP/07/2001 PAGE: 1 OF 4
APPROVED: J.LU CHECKED: DRAWN: S. H. CHEN
Description
The Hyper Red source color devices are made with DH
InGaAlP on GaAs substrate Light Emitting Diode.
2.0x1.2mm SMD CHIP LED LAMP
KP-2012SURCK HYPER RED
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Lead spacing is measured where the lead emerge package.
4. Specifications are subject to change without notice.
Features
!2.0mmx1.2mm SMT LED,1.1mm THICKNESS.
!LOW POWER CONSUMPTION.
!WIDE VIEWING ANGLE.
!IDEAL FOR BACKLIGHT AND INDICATOR.
!VARIOUS COLORS AND LENS TYPES AVAILABLE.
!PACKAGE : 2000PCS / REEL.
Package Dimensions
SPEC NO: KDA0084 REV NO: V.1 DATE: SEP/07/2001 PAGE: 2 OF 4
APPROVED: J.LU CHECKED: DRAWN: S. H. CHEN
Electrical / Optical Characteristics at T)=25°°
°°
°C
Absolute Maximum Ratings at T)=25°°
°°
°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Selection Guide
Note:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
.oNtraP.oNtraP .oNtraP .oNtraP.oNtraPeciDeciD eciD eciDeciDepyTsneLepyTsneL epyTsneL epyTsneLepyTsneL
)dcm(vI)dcm(vI )dcm(vI )dcm(vI)dcm(vI
Am02@
gniweiVgniweiV gniweiV gniweiVgniweiV
elgnA
.niM.niM .niM .niM.niM.pyT.pyT .pyT .pyT.pyT 2/1θ22/1θ2 2/1θ2 2/1θ22/1θ2
KCRUS2102-PK)PlAaGnI(DERREPYHRAELCRETAW05001°021
lobmySlobmyS lobmyS lobmySlobmySretemaraPretemaraP retemaraP retemaraPretemaraPeciveDeciveD eciveD eciveDeciveD.pyT.pyT .pyT .pyT.pyT.xaM.xaM .xaM .xaM.xaMstinUstinU stinU stinUstinUsnoitidnoCtseTsnoitidnoCtseT snoitidnoCtseT snoitidnoCtseTsnoitidnoCtseT
λkaep htgnelevaWkaePdeRrepyH046mnAm02=FI
λDhtgnelevaWetanimoDdeRrepyH036mnAm02=FI
λ∆ 2/1 htdiwflaHeniLlartcepSdeRrepyH82mnAm02=FI
CecnaticapaCdeRrepyH53FpzHM1=f;V0=FV
V
F
egatloVdrawroFdeRrepyH59.15.2V Am02=FI
I
R
tnerruCesreveRdeRrepyH01AuV5=RV
retemaraPretemaraP retemaraP retemaraPretemaraP deRrepyHdeRrepyH deRrepyH deRrepyHdeRrepyHstinUstinU stinU stinUstinU
noitapissidrewoP 071Wm
tnerruCdrawroFCD 03Am
]1[tnerruCdrawroFkaeP 581Am
egatloVesreveR 5V
erutarepmeTgnitarepO 04- °58+oTC °C
erutarepmeTegarotS 04- °58+oTC °C
SPEC NO: KDA0084 REV NO: V.1 DATE: SEP/07/2001 PAGE: 3 OF 4
APPROVED: J.LU CHECKED: DRAWN: S. H. CHEN
Hyper Red KP-2012SURCK
SPEC NO: KDA0084 REV NO: V.1 DATE: SEP/07/2001 PAGE: 4 OF 4
APPROVED: J.LU CHECKED: DRAWN: S. H. CHEN
Recommended Soldering Pattern
(Units : mm)
Tape Specifications
(Units : mm)
KP-2012SURCK
SMT Reflow Soldering Instructions
Number of reflow process shall be less than 2 times and cooling
process to normal temperature is required between first and
second soldering process.
