10 | 9 8 7 6 5 4 3 2 1 SEEC NOTES: 1. (ERIS MATERIAL C INDUYT s PPS,UL94V-0 HOUSING =: PPS, UL94V-0 [D}- S-EFIL: UVa (t=O. 25) TERMINAL : PHOSPHOR BRONZE +0.4 Avi TF iia a ao woe PLATING : TIN-BISMUTH OVER NICKEL (2.4) (A) ; I,25 28 US (t=0, 25) FITTING NAIL : PHOSPHOR BRONZE A El wt yA) Pax PLATING +: TIN OVER NICKEL L L LOYHAITTE { So3[0 0.35 l Ay [0.5], . | ate E) SABO gz) ep eur gad) OYEAIEOAL Ba. | | vy) WieALIGNMEN OF SOLDER TAIL AND FITTING NAIL FROM E] (PITGH) : UPPER DIRECTION 0.1 MAX. , LOWER DIRECTION 0.15 MAX. ba (3.7) FF CHARA S-STPIL | INSERTION DEPTH OF FFC 33.8 31.05 29 52852-3019 30 TERMINAL | _ (hk?) |, eine 32.8 | 30.05 28 -2919 | 29 | LENGTH TO CONTACT POINT 31.8 29,05 27 | -28|9 28 f yy 30.8 | 28.05 26 L -2719 | 27 ep " pes 29.8 | 27.05 25 -2619 | 26 | 28.8 | 26.05 24 -2519 | 25 | 21.8 25.05 23 -2419 24 26.8 | 24.05 22 -2319 | 23 Ss 25.8 | 23.05 2I -2219 | 22 ADD UTD_/ | A 24.8 | 22.05 20 -2119 2\ HOUSING | SECT.X-X 23.8 | 21.05 i9 -2019 | 20 22.8 | 20.05 18 -1919 Ig 21.8 19.05 7 -18 19 18 Bee! 20.8 | 18.05 IG -1719 7 Cpse= 1 Al os 19.8 17.05 5 -1619 IG ArApRe) (A) Beme CMD 4.8 2 18.8 16.05 4 -1519 I5 chr NO. | Xx CoN NT POINT 17.8 5.05 13 -1419 14 (CHAMFERING Cog 16.8 14.05 2 -1319 3 TO INDICATE La a a 15.8 13.05 I -1219 2 CKT.NO. I) aoe 4.8 | 12.05 i0 = 1119 iI | | | | = y = 13.8 11.05 9 -1019 10 HEHE m9 = 2.8 10.05 8 -0319 g 18 | 9.05 7 -08'9 | 8 +] (Sa j0.8 | 8.05 | 6 [-o719_ | 7 x \/ A 8 9.8 7.05 5 / -0619 6 A . FITTING NATL 3 8.8 6.05 4 -0519 5 ABBEY EGE EVEN ckT. 7.8 | 5.05 3 52852-0419 | 4 A. Bit 52852-**10 OMIU-BCHS, Cc B A MATERIAL_NO. | fi, THIS PRODUCT IS LEAD FREE OF 52852-#10 MODEL NO. BOGS 2-** 19 =a S GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE (UNLESS SPECIFIED) MM ONLY 77T METRIC [QC] PROJECTION oss DRAWN BY DATE TITLE = 5 /z[79 UNDER +02. M.NAGATA 04/02/27 1.0 FFC CONN NON ZIF SMT gi = TA OVER UNDER CHECKED BY DATE RA (BOTTOM CONTACT) ms &110 30 +0.25 k.TOJO 04/02/27 -LEAD FREE- SB acox{e OVER APPROVED BY DATE O8Ss_||30 03 Wy sasag ovioniz7| Kole ~=MOLEX INCORPORATED Y S = 4e@| [ANGULAR +3 MATERIAL NO. DOCUMENT NO. SHEET NO. noe=s DRAFT WHERE APPLICABLE SEE CAHRT | SD-52852-010 1 OF 2 Meu = MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A ip WITHIN DIMENSIONS A S|INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_A3_J_ME_S D2 9 8 7 6 | 5 | 4 | 3 | 2 | EN-o2JA(o2 Rev. D 2004/04/02Rev. D 2004/04/02 10 9 8 7 6 5 4 3 2 1 +0, 1 (N+ |) 70-05 (N= 1)0"! __ | 0-15 (N- "0-05 "0: I5 70! (0.6) p ol 20.05 +0. ChvF) _, | 0,770.05 (PITCH) ~ (ey F) ESE S 1 9 (PITCH) CKT.NO. | SIDE Oo = Y Yi, LL LL LL LL LL LL LL LL Yi Uf N LY) LA | | | | a | | | cL js +0,03 ) thiMeso. 8 azo [| U----4 ------=-------- _[---- HW oF PC/FF CHEATS CONNECTOR APPLICABLE FPC/FFC POSITION 2. 2.| RECOMMENDED DIMENSION. * * 4.2 4.2 FPC/FFCIZDUIT ? FIRE SEA GI S ERAS HER, VELET. ABOUT FPC/FFC BSB TVIR Wovhb) RECOMMENDED PUNCHER DIRECTION : FROM CONDUCTOR SIDE TO STIFFENER FILM SIDE. RECOMMENDED P.C.BOARD _ _ . PATTERN DIMENSION. (REF.) FP CICOUT & (MOUNTING AREA) #880 +) LLMBA 7S NERBELAG. SSRIS SERS HEEL A. ABOUT FPC RECOMMENDED MATERIAL : STIFFENER FILM : POLYIMIDE BONDING AGENT : THERMOSETTING BONDING AGENT MODEL _NO.| 52852-**|9 = = S GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE ==rzt (UNLESS SPECIFIED) MM ONLY 77T METRIC [QC] PROJECTION oss DRAWN BY DATE TITLE = 5 /z[79 UNDER +02. M.NAGATA 04/02/27 1.0 FFC CONN NON ZIF SMT my CHECKED BY ATE RA (BOTTOM CONTACT) wn _|8{10 30 +0.25 K.TOJO 04/02/27 -LEAD FREE- 8 |W OVER APPROVED BY DATE as Ssg"|30 03 i casao._gayoz/77| folk ~MOLEX INCORPORATED YW S 3S e ANGULAR +3 MATERIAL NO. DOCUMENT NO. SHEET NO. noe=s DRAFT WHERE APPLICABLE SEE CHART | SD-52852-010 2 OF 2 Meu = MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A iw WITHIN DIMENSIONS A SJINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_A3_J_ME_S D2 9 8 7 6 | 5 | 4 | 3 | 2 | EN-o2JA(o210 9 8 7 6 5 4 3 2 i NOTES |, Hansa AIRS AWHeSRLTPEw. FOR DETAIL OF CONNECTOR DIMENSIONS, PLEASE SEE THE DRAWING OF CONNECTOR ITSELF (NOT PACKAGED). 2. MOMS 2 10008 /'J)L NUMBER OF CONNECTORS =: IOOOPCS/REEL slnlA 3. J-N5=SEe LEAD TAPE LENGTH PULL OUT DIRECTION 20PCS.MIN Kw D5 SBoeak (ZU2T UMA) ZA WU DE L "| TOP TAPE BONDED PART. (EMPTY) SoeosesocrTeses A> 0 7 | PULL OUT oo o DIRECTION a _ unos b TO ~~ f sR | ra aa 3 e 2 COMPONENT (EMPTY) NM MIN, SUPPLIER MIN. | a 400 40 4, KY DT TORIBBRE 3 0.1 1. 3N(10 -~ 130g Ff) (SRA FRB) i, ZARB Wot CB. CIEL. SSRI SUA RAE LUN D _t PEELING OFF FORCE OF TOP TAPE =: 0.17 1.3N{IO ~\ I30gf} D+| (PEELING DIRECTION AS SHOWN IN FOLLOWING FIG,) THIS REQUIREMENT SHOULD BE APPLIED AT SHIPMENT. E+ | PEEL OFF SHOULD NOT BE ALLOWED , DURING TRANSPORTATION. | FIRE PEEL OFF (B10) S5/JaKLAMD 709 fo DIRECTION PULL OUT | ( DIRECTION } 5. ME (MATERIAL) FvUPTTI(CARRIER TAPE) : HU DORL YY (POLYPROPYLENE) bh wIF-T(TOPTAPE): PET , PE , PEF IJ-)L (REEL) : MUAFLY COPS) <UDTO)Meat > POLYSTYREN(PS) <RECYCLE MATERIAL CONTAINED> DETAIL "F" 6. RR 52852-**x90 OHI JU-RCHS, THIS PRODUCT IS LEAD FREE OF 52852-**90 [MODEL NO.| 52852-**70 2 3 6 CA GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE a (UNLESS SPECIFIED) MM ONLY TTT METRIC |OC PROJECTION oSss DRAWN BY DATE TITLE > = = 12/40 UNDER +02. M.NAGATA "4/02/27 1.0 FPC CONN NON ZIF SMT 50 =A OVER ONDER TS CHECKED BY DATE RA BOTTOM CONTACT EMBSTP se 18} 10 30 +0.25 k.T0JO 04/02/27 -LEAD FREE- SoOSS|u APPROVED BY DATE AS 23e\" 3OOVER + 0.3 M SASAO 04/02/27 ifole MOLEX INCORPORATED MS 3588) [ANGULAR +3 MATERIAL NO. DOCUMENT NO. SHEET NO. Oo 22 DRAFT WHERE APPLICABLE SEE TABLE SD-52852-011 10F 5 Or OO =e} MUST REMAIN SIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A i WITHIN DIMENSIONS A\ S|INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_f A3_J_ME_S Rev. E 2006/04/15 9 8 7 6 | 5 | 4 | 3 2 EN-02JA(021)10 9 8 7 6 5 4 3 2 i (7.5) __ sle@hl AM) (2.55) (3.05) (7.5) PULL OUT DIRECTION You 5.) Ky DFT 52852-*# 19 TOP TAPE | | : : ! | : I 5 Nx) 4, me ee AS : ud 3 N , ~ ; | LS NS =<); 2 g oT TEST It | _ S} 2) S A Lo N ~ , | SECT:X-X o = = SEU TiXaX_ = = Cr | (SCALE 4:1) {___ 1-6 -@- -G| -6-|-6- -6} -G - -O| a | _|[|_0.5*9 on x X 0. ~ 7 (2) | [4 | |RaKy 40*O- (4.4) ~ 0. Y ~" ACCUMULATIVE DI 5*O.| |2-> I PITCH 40#0.2 SECT:Y-Y a 8.1 | I5.1 | 1.4 | 52852-1170 | II 2Ammit-vUPFT 7.1 | 14.1 | 10.4 | 52852-1070| 10 24mm WIDTH CARRIER TAPE = Ss = nee ayo ; | oe e948) 29-8 Ta [ikl | 7.4 [52852-0770| 7 I3.1 | 10.1 | 6.4 [52852-0670] 6 2.1 | 9.1 | 5.4 | 52852-0570) 5 Jl.t | 8.1 | 4.4 | 52852-0470] 4 +p 7 The TE MODEL NO.| 52852-**/0 oo 3S GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS | THIRD ANGLE a (UNLESS SPECIFIED) MM ONLY 7 METRIC | OCI SRojECTION oSss DRAWN BY DATE TITLE > = = 12/40 UNDER +02. M.NAGATA 04/02/27 1.0 FRC CONN NON ZIF SMT co . |&I>~oyER ONDER T > CHECKED BY DATE RA BOTTOM CONTACT EMBSTP 6 = |e 10 30 0.25 k.T0J0 04/02/27 -LEAD FREE- SoHSssu OVER APPROVED BY DATE iN a S ele 30 +0.3 M SASAO 04/02/27 molex MOLEX INCORPORATED Y S 38 =| [ANGULAR +3 9 MATERIAL NO. DOCUMENT NO. SHEET NO. no 2= DRAFT WHERE APPLICABLE SEE TABLE SD-52852-011 2.0F 5 WOO sl MUST REMAIN SIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A i WITHIN DIMENSIONS /A\ SIINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_frame_A3_J_ME_S 9 3 7 6 | c | d | 3 5 EN-02JA(024) Rev. E 2006/04/1510 9 8 7 6 5 4 3 2 i slanlAm PULL OUT DIRECTION (7,5) (7,5) ORS? 9 (2.95) (3,05) 1K hy tr7 tet (Sal) TOP TAPE 5 0 2 7; _6-6-6-6- bdo ood | f | | ae = [ cet Ro 4 N ( \ | a| 3 | | i a| 3 3] / |i ec + tH 4 <=} | O SECT:X-X S| og 4 || ; (SCALE 4:I mf Sy | | (SCALE 4:1) } S ee Y S aa | 7 l ee ~ {el TI | _ , 4 +BO+OOF OF O- OF GO O -O ; Si wll 0, 520-05 ~ xX X | +0, | +0.2 (2) | |4_ |atecyy40 (4.4) i Y ACCUMULATIVE By.5S| \2*0.| | PITCH 40*0-2 SEC T:Y-Y 23.1 | 20.1 lo.4 | 52852- le 70 I6 _ _ 22. | IS. | I5.4 | 52852-1570 I5 a | | 77 Semmpay vi JPr 32 57.5 | 33.9 | 21. I8. | 4.4 | 52852-1470 I4 32mm WIDTH CARRIER TAPE 20.1 | I7.1 | 13.4 | 52852-1370] 13 IS. | IG. | 2.4 | 52852-1270 I2 4 P7 Te TEL MODEL NO.| 52852-**70 =o SS GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS THIRD ANGLE a (UNLESS SPECIFIED) MM ONLY 7 METRIC | OCI SRojECTION oSss DRAWN BY DATE TITLE > = = 12/40 UNDER +02. M.NAGATA 04/02/27 1.0 FRC CONN NON ZIF SMT co . |&I>~oyER ONDER T > CHECKED BY DATE RA BOTTOM CONTACT EMBSTP 6 = |e 10 30 0.25 k.T0J0 04/02/27 -LEAD FREE- SoHSssu OVER APPROVED BY DATE oN a S ele 30 +0.3 M SASAO 04/02/27 molex MOLEX INCORPORATED Y S 38 =| [ANGULAR +3 MATERIAL NO. DOCUMENT NO. SHEET NO. mo ext DRAFT WHERE APPLICABLE SEE TABLE SD-52852-011 3 0F 5 WOO sl MUST REMAIN SIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX i INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION A WITHIN DIMENSIONS tb_frame_A3_J_ME_S Rev. E 2006/04/15 9 8 7 6 | 5 | 4 | 3 2 EN-02JA(021)10 9 8 7 | 6 5 4 3 2 4 (7,5) sla (2,55) PULL OUT DIRECTION ~ 52852-*|9 TOP TAPE e-6+6-9- 64 > _ (5,1) vee N h r Js TIT: __| | o < 7 | | ~| N a th _1 <t am CO = Lt H < mM pO |, oy L | | Ry t fof ed) iyi q | | | SECT:X=X S | (SCALE 4:1) y v co TT | fluo a ea = , LI IB -&-B- -t -6--- -] Bt -6- -G) ml 0.5 20:05 #2 x X | Jeo. 34.1 | 31 | 27.4 |52852-2770| 27 [_0.5* 0, nto? 2) (2) | a 33.1 | 30.1 | 26.41 52852-2670] 26 a +0. p80. | Y PITCH 4020.2 32.1 | 29.1 | 25.4 | 52852-2570] 25 SECTeY-Y LP\5 0 Sil | 28.1 | 24.4 | 52852-2470] 24 4d 49.5 | 45.5 [s0e! [27.1 | 23.4 | 52852-2370] 23 | | | | | | | | | | 29.1 | 26.1 | 22.4 | 52852-2270] 22 | | | | | | | | | | 28. 20. 21.4 | 52852-2170 | 2 AAmmilp+v rr 7 20. 24. 20.4 |52852-2070| 20 44mm WIDTH CARRIER TAPE 26. 23. I9.4 | 52852-1970 IS 25. 22. I8.4 | 52852-1870 I8 24, 2 |. 17.4 | 52852-1770 7 $l PT Te TEE CARRIER TAPE WiTH} = D (C) (B) (A) | MATERIAL NO.} ey. > DIMENSION STYLE SCALE MODEL NO. peboc** [0 =e S GENERAL TOLERANCES THIRD. ANGLE ===] | UNLESS sPECRIED) MM ONLY --- | METRIC |Q Cl pRovECTION oSs DRAWN BY DATE TITLE > = = 12/40 UNDER +02. M.NAGATA 04/02/27 1.0 FRC CONN NON ZIF SMT co . |&I>~oyER ONDER CHECKED BY DATE RA BOTTOM CONTACT EMBSTP 2 = |S 10 30 +0.25 K.TOJO "04/02/27 -L FAD FREE- SoHSssu OVER APPROVED BY DATE oN AS S22 30 +0.3 M SASAO 04/02/27 molex MOLEX INCORPORATED Y S 38 =| [ANGULAR +3 MATERIAL NO. DOCUMENT NO. SHEET NO. tu aa DRAFT WHERE APPLICABLE - - mo ext SEE TABLE SD-52852-011 4 OF 5 Or OO =e} MUST REMAIN SIZE] THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A i WITHIN DIMENSIONS A\ S|INCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_f A3_J_ME_S Rev. E 2006/04/15 9 8 7 6 | 5 | 4 | 3 2 EN-02JA(021)10 9 8 7 6 5 4 3 2 i - (7.5), 3/e@Wl AG (2.55) _|(3.05) PULL OUT DIRECTION You +0. | Lol0 | 52852-** |9 50 do | KY ITF | 3 tS) / TOP TAPE 6-4o-0- 04 OO -G-6 6 i (5.1) E _| c= Ft tok A 7 f =| | | | ND _ | | | | e | | i : | | | a. BLL a; oA #4 N,, / a} AL OA , 48 fe) oe ay ye as aes | | it 5 | LO | | (i ; S | i fii | [= = ae ET Le WA C , tt 1B -@-|-G- -G -6-|-B- -G] -G -6- -G SLO . S xX X +0. | +0,2 0,5%0:05 (2) 4 RRR VF 40 | . Y ACCUMULATIVE (4.4) . B5o| (2 PITCH 40*0.2 4f.| 34, | 30.4 | 52852-3070} 30 SECTi-Y_ 56 61.5 | 57.5 | 36.1 | 33.1 | 29.4] 52852-2970] 29 3 5 emmtist-v UPeT 35.1 | 32.1 | 28.4 | 52852-2870| 28 vier Tig | og p | c) | B) | CA) | MATERIAL No.| BB 56mm WIDTH CARRIER TAPE CARRIER TAPE WIDTH "| CKT. MODEL NO.| 52852-**70 =e < GENERAL TOLERANCES DIMENSION STYLE SCALE DESIGN UNITS | THIRD ANGLE SSE (UNLESS SPECIFIED) MM ONLY --- METRIC C] pROECTION | DRAWN BY DATE TITLE > = = 12/40 UNDER +02. M.NAGATA 04/02/27 1.00 FRC CONN. N-ZIF R/A 50 =A OVER ONDER CHECKED BY DATE RA BOTTOM CONTACT EMBSTP > = _|8{10 30 +0.25 K.10J0 04/02/27 -LEAD FREE- Suse] OVER APPROVED BY DATE awn A a S ZA 30 + 0.3 M SASAO 04/02/27 molex MOLEX INCORPORATED Y) S = a = ANGULAR +3 MATERIAL NO. DOCUMENT NO. SHEET NO. no 2= DRAFT WHERE APPLICABLE SEE TABLE SD-52852-011 5 OF 5 Pwmoait = MUST REMAIN SIZE | THIS DRAWING CONTAINS INFORMATION THAT IS PROPRIETARY TO MOLEX A a WITHIN DIMENSIONS A\ 3JINCORPORATED AND SHOULD NOT BE USED WITHOUT WRITTEN PERMISSION tb_f A3_J_ME_S _frame_A3_J_ME_ 9 8 7 6 | 5 | 4 | 3 2 EN-02JA(021) Rev. E 2006/04/15