RC201 DC COMPONENTS CO., LTD. R THRU RECTIFIER SPECIALISTS RC207 TECHNICAL SPECIFICATIONS OF SINGLE-PHASE SILICON BRIDGE RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 2.0 Amperes FEATURES * Surge overload ratings to 50 Amperes peak * Ideal for printed circuit board assembly RC-2 MECHANICAL DATA * * * * * * Case: Molded plastic Epoxy: UL 94V-0 rate flame retardant Lead: MIL-STD-202E, Method 208 guaranteed Polarity: As marked Mounting position: Any Weight: 1.88 grams MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. SPACING For capacitive load, derate current by 20%. Dimensions in inches and (millimeters) SYMBOL RC201 RC202 RC203 RC204 RC205 RC206 RC207 UNITS Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Bridge Input Voltage VRMS 35 70 140 280 420 560 700 Volts VDC 50 100 200 400 600 800 1000 Maximum DC Blocking Voltage Maximum Average Forward Output Current at T A = 25oC Peak Forward Surge Current 8.3 ms single half sine-wave Volts IO 2.0 Amps I FSM 50 Amps VF 1.1 Volts superimposed on rated load (JEDEC Method) Maximum Forward Voltage Drop per element at 1.0A DC Maximum DC Reverse Current at Rated @T A = 25 oC DC Blocking Voltage per element @T A = 100 o C 2 I t Rating for Fusing (t<8.3ms) Typical Junction Capacitance ( Note1) Typical Thermal Resistance (Note 2) Operating Temperature Range Storage Temperature Range 10 uAmps IR 500 2 I t CJ 25 RJ A 40 TJ T STG A 2 Sec 10 pF 0 C/W -55 to + 125 0 -55 to + 150 0 C C NOTES : 1.Measured at 1 MHZ and applied reverse voltage of 4.0 volts 2. Thermal Resistance from Junction to Ambient and from junction to lead mounted on P.C.B. with 0.47 x 0.47" (12x12mm) copper pads. 192 NEXT NEXT NEXT BACK BACK BACK EXIT EXIT EXIT RATING AND CHARACTERISTIC CURVES (RC201 THRU RC207) DC COMPONENTS CO., LTD. R 193 NEXT NEXT BACK BACK EXIT EXIT