Plastic Film Capacitors Stacked Metallized PEN Film Chip Capacitor Type: ECWU(C) Stacked metallized PEN film as dielectric with simple mold-less construction Features * Small in size * For reflow soldering * RoHS directive compliant Recommended Applications * General purpose (Coupling, By-pass) Explanation of Part Numbers 1 2 3 4 E C W U Product code Dielectric & construction 5 6 7 8 9 10 11 12 C Rated voltage 1 2 Nominal capacitance Cap. Tol. Suffix Suffix J 5 % K 10 % 100 VDC 250 VDC 9 V Tape width 12 mm 16 mm Specifications Category temp.range (Including temperature-rise on unit surface) -55 C to +125 C Rated voltage 100 VDC, 250 VDC (Derating of rated voltage by 1.25 %/C more than 85 C) Capacitance range Capacitance tolerance 100 VDC 0.012 F to 1.0 F (E12) 250 VDC 0.0010 F to 0.12 F (E12) 100 VDC >0.18 F : 10 %(K)only) 5 %(J), 10 %(K) (C= Withstand voltage 5 %(J), 10 %(K) 250 VDC Between terminals: Rated volt. (VDC)150 % 60 s Dissipation factor (tan ) tan < =1.0 %(20 C, 1 kHz) Insulation resistance (IR) C< =0.33 F C>0.33 F Soldering conditions Reflow soldering : 240 C max. and 60 s max. at more than 220 C (Temp. at cap. surface) (Please consult us for Reflow 250 C max. product.) >3000 M * (20 C,100 VDC, 60 s) 100 VDC, 250 VDC : IR= >1000 M * F (20 C,100 VDC, 60 s) 100 VDC : IR= In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of "Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage". Please consult us for capacitance range between 0.15 F and 1.0 F for 250 VDC type. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors Construction Dimensions in mm (not to scale) Size code E1 E2 E3a E3 D1 D2 D3 D4 D5 B Z X V L 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 6.0 7.1 7.7 9.8 W H 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 4.1 5.0 5.0 5.5 6.3 1.4 2.0 2.4 2.8 1.8 2.0 2.4 2.8 3.2 Refer to the column "Rating, Dimensions & Quantity". Taping Specification for Automatic Mounting Refer to the page of taping specifications. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors Rating, Dimensions & Quantity/Reel Capacitance tolerance : 5 % (J), 10 % (K) Cap. (F) 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Rated volt. 100 VDC Part No Dimensions (mm) L W H Rated volt. 250 VDC Size code Q'ty Please use 100 VDC rating ECWU(X) ECWU1123C9 ECWU1153C9 ECWU1183C9 ECWU1223C9 ECWU1273C9 ECWU1333C9 ECWU1393C9 ECWU1473C9 ECWU1563C9 ECWU1683C9 ECWU1823C9 ECWU1104C9 ECWU1124C9 ECWU1154C9 ECWU1184KC9 ECWU1224KC9 ECWU1274KC9 ECWU1334KC9 ECWU1394KCV ECWU1474KCV ECWU1564KCV ECWU1684KCV ECWU1824KCV ECWU1105KCV 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 7.1 7.1 7.1 7.1 7.7 7.7 9.8 9.8 9.8 9.8 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 5.0 5.0 5.0 5.0 5.5 5.5 6.3 6.3 6.3 6.3 1.4 1.4 1.4 1.4 1.4 1.4 1.4 2.0 2.0 2.4 2.8 1.8 2.4 2.8 2.0 2.4 2.9 3.5 3.4 4.0 3.0 3.6 4.3 5.1 E1 E1 E1 E1 E1 E1 E1 E2 E2 E3a E3 D1 D3 D4 Z Z Z Z X X V V V V 3000 2000 3000 2000 Dimensions (mm) Part No L 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 6.0 6.0 ECWU2102C9 ECWU2122C9 ECWU2152C9 ECWU2182C9 ECWU2222C9 ECWU2272C9 ECWU2332C9 ECWU2392C9 ECWU2472C9 ECWU2562C9 ECWU2682C9 ECWU2822C9 ECWU2103C9 ECWU2123C9 ECWU2153C9 ECWU2183C9 ECWU2223C9 ECWU2273C9 ECWU2333C9 ECWU2393C9 ECWU2473C9 ECWU2563C9 ECWU2683C9 ECWU2823C9 ECWU2104C9 ECWU2124C9 W 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 5.0 5.0 5.0 H 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 1.4 2.0 2.0 2.4 2.8 2.0 2.4 2.8 3.2 3.2 3.8 4.5 Size code E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E1 E2 E2 E3a E3 D2 D3 D4 D5 B B B Cap. tol. code 1500 1000 Cap. tol. code Recommened for Land Dimensions (mm) Land dimensions for reflow soldering Size code E1,E2,E3a,E3 D1,D2,D3,D4,D5 B Z X V A B C 2.6 3.8 3.8 4.5 5.1 7.2 6.6 7.8 7.8 9.0 9.7 11.9 3.0 3.8 4.6 4.6 5.0 5.7 It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when "Recommender for Land dimensions" is adopted. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Q'ty 3000 2000 3000 2000 1500