SPEC NO: DSAH3789 REV NO: V.1 DATE: APR/26/2007 PAGE: 1 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000603
Part Number: APTK2012RWC/A-F01 WHITE
Description
The source color devices are made with InGaN on SiC
Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Features
2.0mmx1.25mm SMT LED, 0.75mm THICKNESS.
LOW POWER CONSUMPTION.
WIDE VIEWING ANGLE.
IDEAL FOR BACK LIGHT AND INDICATOR.
VARIOUS COLORS AND LENS TYPES AVAILABLE.
PACKAGE : 2000PCS / REEL.
MOISTURE SENSITIVITY LEVEL : LEVEL 4.
ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V.
TYP. COLOR TEMPERATURE:6500K
COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO
CIE1931(WHITE).
OPTICAL EFFICIENCY:10.5 lm/W(TYP.)
COLOR REPRODUCTION INDEX:80
RoHS COMPLIANT.
Applications
traffic signaling.
backlighting (illuminated advertising , general lighting).
interior and exterior automotive lighting.
substitution of micro incandescent lamps.
Reading camps.
signal and symbol luminaire for orientation.
marker lights (e.g. steps, exit ways, etc).
decorative and entertainment lighting.
indoor and outdoor commercial and residential
architectural lighting.
Package Dimensions
2.0x1.25mm SMD CHIP LED LAMP
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
PRELIMINARY SPEC
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH3789 REV NO: V.1 DATE: APR/26/2007 PAGE: 2 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000603
Selection Guide
Parameter Symbol Value Unit
Power dissipation Pt120 mW
Reverse Voltage VR5 V
Junction temperature TJ110 °C
Operating Temperature Top -40 To +85 °C
Storage Temperature Tstg -40 To +100 °C
DC Forward Current IF30 mA
Peak Forward Current Note4 IFM 100 mA
Thermal resistance
Junction/ambient Note5
Junction/solder point
Rth JA
Rth JS 350
130 °C/W
°C/W
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Parameter Symbol Value Unit
Chromaticity coordinate x acc.to CIE1931
IF=20mA [Typ.] XNote1 0.31 -
Chromaticity coordinate y acc.to CIE1931
IF=20mA [Typ.] YNote1 0.31 -
Forward Voltage IF=20mA [Min.]
VFNote2
2.7
VForward Voltage IF=20mA [Typ.] 3.2
Forward Voltage IF=20mA [Max.] 4.0
Reverse Current (VR=5V) [Typ.] IR0.01 µA
Reverse Current (VR=5V) [Max.] 10
Temperature coefficient of x
IF=20mA, -10°CT100°C [Typ.] TCx -0.1 10-3 /°C
Temperature coefficient of y
IF=20mA, -10°CT100°C [Typ.] TCy -0.2 10-3 /°C
Temperature coefficient of VF
IF=20mA, -10°CT100°C [Typ.] TCV-2.5 mV/°C
Part No. Dice Lens Type luminous Intensity Note2
Iv(mcd) @ 20 mA v (mlm) Note3
@ 20 mA
Viewing
Angle Note1
Min. Typ. Typ. 2θ1/2
APTK2012RWC/A-F01 WHITE (InGaN) WATER CLEAR 70 200 700 100°
Notes:
1.θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%.
3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data.
For the purpose of product enhancement, the typical data is subject to change without prior notice.
4.1/10 Duty Cycle, 0.1ms Pulse Width.
5.Rth(J-A) Results from mounting on PC board FR4 (pad size≥16 mm2per pad),
Notes:
1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of ±0.01 in X and Y color coordinates.
2.Forward voltage is measured with a current pulse of 10ms at a tolerance of ±0.1V.
SPEC NO: DSAH3789 REV NO: V.1 DATE: APR/26/2007 PAGE: 3 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000603
White APTK2012RWC/A-F01
Brightness codes
v(mlm) Note2
@ 20 mA
Code. Min. Max. Typ.
M 70 130 300
N 110 220 480
P 180 320 710
Q 280 420 960
luminous IntensityNote1
Iv(mcd) @ 20 mA
Notes:
1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of ±15%.
2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the
typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice.
SPEC NO: DSAH3789 REV NO: V.1 DATE: APR/26/2007 PAGE: 4 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000603
APTK2012RWC/A-F01
SPEC NO: DSAH3789 REV NO: V.1 DATE: APR/26/2007 PAGE: 5 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000603
APTK2012RWC/A-F01
0.22
0.24
0.26
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
0.44
0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44
a1
a0
b3 b1
b2
b4 c0
c1
a0 a1
X 0.264 0.283 0.296 0.280 X 0.248 0.275 0.283 0.264
Y 0.267 0.305 0.276 0.248 Y 0.286 0.321 0.305 0.267
Reference CCT: 14000~9000k Reference CCT: 14000~9000k
b1 b2
X 0.283 0.330 0.330 0.287 X 0.287 0.330 0.330 0.296
Y 0.305 0.360 0.339 0.295 Y 0.295 0.339 0.318 0.276
Reference CCT: 9000~5600k Reference CCT: 9000~5600k
b3 b4
X 0.275 0.298 0.306 0.283 X 0.298 0.321 0.330 0.306
Y 0.321 0.350 0.332 0.305 Y 0.350 0.379 0.360 0.332
Reference CCT: 9000~7000k Reference CCT: 7600~5600k
c0 c1
X 0.330 0.361 0.356 0.330 X 0.321 0.366 0.361 0.330
Y 0.360 0.385 0.351 0.318 Y 0.379 0.419 0.385 0.360
Reference CCT: 5600~4600k Reference CCT: 6000~4600k
White CIE
SPEC NO: DSAH3789 REV NO: V.1 DATE: APR/26/2007 PAGE: 6 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000603
Tape Specifications
(Units : mm)
APTK2012RWC/A-F01
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
Reel Dimension
SPEC NO: DSAH3789 REV NO: V.1 DATE: APR/26/2007 PAGE: 7 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI ERP: 1204000603
PACKING & LABEL SPECIFICATIONS APTK2012RWC/A-F01
