© 2000 IXYS All rights reserved 1 - 2
Features
Thyristor controller for AC (circuit
W3C acc. to IEC) for mains frequency
Package with metal base plate
Isolation voltage 3000 V~
Planar passivated chips
UL applied
Applications
Switching and control of
three phase AC circuits
Softstart AC motor controller
Solid state switches
Light and temperature control
Advantages
Easy to mount with two screws
Space and weight savings
Improved temperature and power
cycling
High power density
Symbol Test Conditions Maximum Ratings
VWO 80 VWO 95
IRMS TC = 85°C, 50 - 400 Hz (per phase) 82 96 A
ITRMS TVJ = TVJM 59 69 A
ITAVM TC = 85°C; (180° sine) 37 44 A
ITSM TVJ = 45°C; t = 10 ms (50 Hz), sine 1000 1150 A
VR = 0 t = 8.3 ms (60 Hz), sine 1100 1230 A
TVJ = TVJM t = 10 ms (50 Hz), sine 900 1000 A
VR = 0 t = 8.3 ms (60 Hz), sine 1000 1100 A
I2tTVJ = 45°C t = 10 ms (50 Hz), sine 5000 6600 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 5080 6280 A2s
TVJ = TVJM t = 10 ms (50 Hz), sine 4050 5000 A2s
VR = 0 t = 8.3 ms (60 Hz), sine 4200 5080 A2s
(di/dt)cr TVJ = TVJM repetitive, IT = 150 A 100 A/ms
f =50 Hz, tP =200 ms
VD = 2/3 VDRM
IG = 0.3 A non repetitive, IT = ITAVM 500 A/ms
diG/dt = 0.3 A/ms
(dv/dt)cr TVJ = TVJM;V
DR = 2/3 VDRM 1000 V/ms
RGK = ¥; method 1 (linear voltage rise)
PGM TVJ = TVJM tp = 30 ms10W
IT = ITAVM tp = 300 ms5W
PGAVM 0.5 W
VRGM 10 V
TVJ -40...+125 °C
TVJM 125 °C
Tstg -40...+125 °C
VISOL 50/60 Hz, RMS t = 1 min 2500 V~
IISOL £ 1 mA t = 1 s 3000 V~
MdMounting torque (M5) 5/44±15 % Nm/lb.in.
Terminal connection torque (M3; M5) 1.5/13±15 % Nm/lb.in.
Weight typ. 180 g
VRSM VRRM Type
VDSM VDRM
VV
800 800 VWO 80-08io7 VWO 95-08io7
1200 1200 VWO 80-12io7 VWO 95-12io7
1400 1400 VWO 80-14io7 VWO 95-14io7
VWO 80
VWO 95
Data according to IEC 60747 refer to a single thyristor/diode unless otherwise stated.
IXYS reserves the right to change limits, test conditions and dimensions
IRMS = 80/95 A
VRRM = 800-1400 V
Three Phase
AC Controller Modules
Preliminary data
3
2
19
8
7
16
14
17
1011
13
14 1 16 2 17 3
710 811 913
© 2000 IXYS All rights reserved 2 - 2
Symbol Test Conditions Characteristic Values
VWO 80 VWO 95
ID, IRTVJ = TVJM; VR = VRRM; VD = VDRM £55mA
VTIT= 150 A; TVJ = 25°C£1.65 1.57 V
VT0 For power-loss calculations only 0.85 0.85 V
rT5.2 4.8 mW
VGT VD = 6 V; TVJ = 25°C£1.0 1.0 V
TVJ = -40°C£1.6 1.6 V
IGT VD = 6 V; TVJ = 25°C£100 100 mA
TVJ = -40°C£150 150 mA
VGD TVJ = TVJM;V
D = 2/3 VDRM £0.2 0.2 V
IGD £55mA
ILTVJ = 25°C; tP = 10 ms£200 200 mA
IG = 0.3 A; diG/dt = 0.3 A/ms
IHTVJ = 25°C; VD = 6 V; RGK = ¥ £ 150 150 mA
tgd TVJ = 25°C; VD = 1/2 VDRM £22ms
IG = 0.3 A; diG/dt = 0.3 A/ms
tqTVJ = TVJM; IT = 20 A, tP = 200 ms;
di/dt = -10 A/ms typ. 150 150 ms
VR = 100 V; dv/dt = 15 V/ms; VD = 2/3 VDRM
RthJC per thyristor; sine 180°el 0.81 0.66 K/W
per module 0.135 0.11 K/W
RthJK per thyristor; sine 180°el 1.0 0.93 K/W
per module 0.167 0.155 K/W
dSCreeping distance on surface 8.0 mm
dACreepage distance in air 4.5 mm
aMax. allowable acceleration 50 m/s2
Dimensions in mm (1 mm = 0.0394")
VWO 80
VWO 95