GU PhotoMOS (AQW21PS) TESTING Super miniature design, SOP (2 Form A) 8-pin type. Controls load voltage 350V, 400V. SO package measuring (W) 4.4 x (L) 9.37 x (H) 2.1 mm (W) .173x (L) .369x (H) .083 inch --approx. 38% of the volume and 66% of the footprint size of DIP type PhotoMOS Relays. 4.4 .173 2.1 .083 9.37 .369 (DIP) mm inch 1 8 2 7 3 6 4 5 GU PhotoMOS (AQW21PS) 3. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 4. Low-level off state leakage current In contrast to the SSR with an off state leakage current of several milliamperes, the PhotoMOS relay features a very small off state leakage current of typ. 100 pA even with the rated load voltage of 400 V (AQW214S) (SOP) Approx. 38% Volume Approx. 66% Footprint TYPICAL APPLICATIONS FEATURES 1. 2 channels in super miniature design The device comes in a super-miniature * Telephones * Measuring instruments * Computer * Industrial robots * High-speed inspection machines. 2. Tape and reel The device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automatic insertion machines. TYPES Type Output rating* Part No. Load voltage Load current Picked from the 1/2/3/4-pin side Picked from the 5/6/7/8-pin side 350 V 100 mA AQW210SX AQW210SZ 400 V 80 mA AQW214SX AQW214SZ AC/DC Packing quantity in tape and reel 1,000 pcs. *Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" or "Z" is not needed when ordering; Tube: 50 pcs.; Case: 1,000 pcs.) (2) For space reasons, the package type indicator "X" and "Z" are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item Input Output Symbol AQW210S AQW214S LED forward current IF 50 mA LED reverse voltage VR 5V Peak forward current IFP 1A Power dissipation Pin 75 mW Load voltage (peak AC) VL 350 V 400 V Continuous load current IL 0.1 A (0.13 A) 0.08 A (0.1 A) Peak load current Ipeak 0.3 A Power dissipation Pout f = 100 Hz, Duty factor = 0.1% 0.24 A PT 650 mW I/O isolation voltage Viso 1,500 V AC Operating Topr -40C to +85C -40F to +185F Storage Tstg -40C to +100C -40F to +212F ds_aqw21s: 010404J ( ): in case of using only 1 channel Peak AC, DC A connection: 100 ms (1 shot), VL = DC 600 mW Total power dissipation Temperature limits Remarks Non-condensing at low temperatures 1 GU PhotoMOS (AQW21PS) 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol Typical LED operate current Maximum Minimum LED turn off current Input Typical Maximum IFon Maximum Output Off state leakage current Maximum Typical Turn on time* Transfer characteristics Maximum Typical Turn off time* Maximum Typical I/O capacitance Maximum Initial I/O isolation resistance Minimum Remarks IL = Max. 3 mA 0.4 mA IL = Max. 0.8 mA 1.25 V (1.14 V at IF = 5 mA) VF IF = 50 mA 1.5 V Typical On resistance AQW214S 0.9 mA IFoff Typical LED dropout voltage AQW210S Ron 16 30 35 50 IF = 5 mA IL = Max. Within 1 s on time IF = 0 mA VL = Max. 1 A Ileak 0.23 ms Ton 0.21 ms IF = 5 mA IL = Max. 0.5 ms 0.04 ms Toff IF = 5 mA IL = Max. 0.2 ms 0.8 pF Ciso f = 1 MHz VB = 0 V 1.5 pF 1,000 M Riso 500 V DC Note: Recommendable LED forward current IF = 5 mA. For type of connection, catalog. *Turn on/ Turn off time Input 90% Output 10% Ton Toff Q For Dimensions, seecatalog. Q For Schematic and Wiring Diagrams, seecatalog. Q For Cautions for Use, seecatalog. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Measured portion: between terminals 5 and 6, 7 and 8; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 50 1.0 AQW210S 100 AQW214S 80 60 AQW214S 40 30 AQW210S 20 0.8 Turn on time, ms On resistance, Load current, A 120 AQW210S 0.6 AQW214S 0.4 40 10 0.2 20 0 -40 -20 0 20 40 60 8085 100 Ambient temperature, C 2 0 -40 -20 0 20 40 60 Ambient temperature, C 8085 0 -40 -20 0 20 40 60 8085 Ambient temperature, C ds_aqw21s: 010404J GU PhotoMOS (AQW21PS) 4. Turn off time vs. ambient temperature characteristics 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED operate current, mA Turn off time, ms 0.3 0.2 AQW214S 5 LED turn off current, mA 5 0.4 4 3 2 4 3 2 0.1 1 1 AQW210S 0 -40 -20 0 20 40 60 0 8085 -40 -20 Ambient temperature, C 0 20 40 60 0 8085 -40 -20 0 20 40 60 80 85 Ambient temperature, C Ambient temperature, C 7. LED dropout voltage vs. ambient temperature characteristics 8. Current vs. voltage characteristics of output at MOS portion 9. Off state leakage current vs. load voltage characteristics Sample: All types; LED current: 5 to 50 mA Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Ambient temperature: 25C 77F 1.4 1.3 60 40 -60 10mA 5mA -20 10-6 10-9 AQW214S AQW210S 10-12 -100 -40 10-3 -80 1.0 0 AQW214S 1 2 3 4 5 -20 Voltage, V -40 30mA 20mA 1.1 80 20 -5 -4 -3 -2 -1 50mA 1.2 AQW210S 100 Off state leakage current, A Current, mA LED dropout voltage, V 1.5 0 0 20 40 60 8085 Ambient temperature, C 20 40 80 60 Load voltage, V 100 10. Turn on time vs. LED forward current characteristics 11. Turn off time vs. LED forward current characteristics 12. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 5 and 6, 7 and 8; Frequency: 1 MHz; Ambient temperature: 25C 77F 1.4 AQW210S Output capacitance, pF 1.2 50 0.10 Turn off time, ms Turn on time, ms 0.08 1.0 0.8 0.6 AQW214S 0.06 AQW214S 0.04 AQW210S 40 30 20 0.4 10 0.02 0.2 0 0 10 20 30 40 50 LED forward current, mA ds_aqw21s: 010404J 60 10 20 30 40 50 LED forward current, mA 0 0 10 20 30 40 50 Applied voltage, V 3