GU PhotoMOS (AQW21PS)
1
ds_aqw21s: 010404J
TYPES
*Indicate the peak AC and DC values.
Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix “X” or “Z” is not needed when ordering; Tube: 50 pcs.;
Case: 1,000 pcs.)
(2) For space reasons, the package type indicator “X” and “Z” are omitted from the seal.
RATING
1. Absolute maximum ratings (Ambient temperature: 25°C 77°F)
Super miniature design,
SOP (2 Form A) 8-pin type.
Controls load voltage
350V, 400V.
GU PhotoMOS
(AQW21PS)
Type Output rating* Part No. Packing quantity in tape
and reel
Load voltage Load current Picked from the 1/2/3/4-pin side Picked from the 5/6/7/8-pin side
AC/DC 350 V 100 mA AQW210SX AQW210SZ 1,000 pcs.
400 V 80 mA AQW214SX AQW214SZ
Item Symbol AQW210S AQW214S Remarks
Input
LED forward current IF50 mA
LED reverse voltage VR5 V
Peak forward current IFP 1 A f = 100 Hz, Duty factor = 0.1%
Power dissipation Pin 75 mW
Output
Load voltage (peak AC) VL350 V 400 V
Continuous load current IL0.1 A (0.13 A) 0.08 A (0.1 A) ( ): in case of using only 1 channel
Peak AC, DC
Peak load current Ipeak 0.3 A 0.24 A A connection: 100 ms (1 shot), VL = DC
Power dissipation Pout 600 mW
Total power dissipation PT650 mW
I/O isolation voltage Viso 1,500 V AC
Temperature limits Operating Topr –40°C to +85°C –40°F to +185°FNon-condensing at low temperatures
Storage Tstg –40°C to +100°C –40°F to +212°F
TESTING
mm inch
FEATURES
1. 2 channels in super miniature
design
The device comes in a super-miniature
9.37
.369
4.4
.1732.1
.083
1
2
3
4
8
7
6
5
SO package measuring (W) 4.4 × (L)
9.37 × (H) 2.1 mm (W) .173× (L) .369×
(H) .083 inch —approx. 38% of the
volume and 66% of the footprint size of
DIP type PhotoMOS Relays.
2. Tape and reel
The device comes standard in a tape and
reel (1,000 pcs./reel) to facilitate
automatic insertion machines.
3. Controls low-level analog signals
PhotoMOS relays feature extremely low
closed-circuit offset voltage to enable
control of low-level analog signals without
distortion.
4. Low-level off state leakage current
In contrast to the SSR with an off state
leakage current of several milliamperes,
the PhotoMOS relay features a very
small off state leakage current of typ. 100
pA even with the rated load voltage of
400 V (AQW214S)
TYPICAL APPLICATIONS
• Telephones
• Measuring instruments
• Computer
• Industrial robots
• High-speed inspection machines.
Volume
(SOP)(DIP) Approx. 38%
Footprint Approx. 66%
GU PhotoMOS (AQW21PS)
2ds_aqw21s: 010404J
2. Electrical characteristics (Ambient temperature: 25°C 77°F)
Note: Recommendable LED forward current IF = 5 mA. For type of connection, catalog.
*Turn on/ Turn off time
Q For Dimensions, seecatalog.
Q For Schematic and Wiring Diagrams, seecatalog.
Q For Cautions for Use, seecatalog.
REFERENCE DATA
Item Symbol AQW210S AQW214S Remarks
Input
LED operate current Typical IFon
0.9 mA IL = Max.
Maximum 3 mA
LED turn off current Minimum IFoff
0.4 mA IL = Max.
Typical 0.8 mA
LED dropout voltage Typical VF
1.25 V (1.14 V at IF = 5 mA) IF = 50 mA
Maximum 1.5 V
Output
On resistance
Typical
Ron
16 Ω30 ΩIF = 5 mA
IL = Max.
Within 1 s on time
Maximum 35 Ω50 Ω
Off state leakage current Maximum Ileak 1 µAIF = 0 mA
VL = Max.
Transfer
characteristics
Turn on time* Typical Ton
0.23 ms 0.21 ms IF = 5 mA
IL = Max.
Maximum 0.5 ms
Turn off time* Typical Toff
0.04 ms IF = 5 mA
IL = Max.
Maximum 0.2 ms
I/O capacitance Typical Ciso
0.8 pF f = 1 MHz
VB = 0 V
Maximum 1.5 pF
Initial I/O isolation resistance Minimum Riso 1,000 MΩ500 V DC
Ton
Input
Output 10%
90%
Toff
1. Load current vs. ambient temperature
characteristics
Allowable ambient temperature: –40°C to +85°C
–40°F to +185°F
2. On resistance vs. ambient temperature
characteristics
Measured portion: between terminals 5 and 6, 7 and 8;
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
3. Turn on time vs. ambient temperature
characteristics
LED current: 5 mA;
Load voltage: Max. (DC);
Continuous load current: Max. (DC)
0
40
60
0 20 40 60 8085100-40 -20
20
AQW210S
AQW214S
80
100
120
Ambient temperature, °C
Load current, A
0
10
20
30
40
-40 -20
50
02040608085
AQW210S
AQW214S
Ambient temperature, °C
On resistance, Ω
0
0.4
0.6
-40 -20
1.0
02040608085
0.2
0.8 AQW210S
Ambient temperature, °C
Turn on time, ms
AQW214S
GU PhotoMOS (AQW21PS)
3
ds_aqw21s: 010404J
4. Turn off time vs. ambient temperature
characteristics
LED current: 5 mA; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
5. LED operate current vs. ambient
temperature characteristics
Sample: All types; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
6. LED turn off current vs. ambient temperature
characteristics
Sample: All types; Load voltage: Max. (DC);
Continuous load current: Max. (DC)
0
0.1
0.2
0.3
0.4
-40 -20 02040608085
AQW214S
AQW210S
Ambient temperature, °C
Turn off time, ms
0
1
2
3
4
-40 -20
5
02040608085
Ambient temperature, °C
LED operate current, mA
0
1
2
3
4
-40 -20
5
02040608085
Ambient temperature, °C
LED turn off current, mA
7. LED dropout voltage vs. ambient
temperature characteristics
Sample: All types;
LED current: 5 to 50 mA
8. Current vs. voltage characteristics of output
at MOS portion
Measured portion: between terminals 5 and 6, 7 and 8;
Ambient temperature: 25°C 77°F
9. Off state leakage current vs. load voltage
characteristics
Measured portion: between terminals 5 and 6, 7 and 8;
Ambient temperature: 25°C 77°F
0
1.0
1.1
1.2
1.3
-40 -20 02040608085
1.4
50mA
30mA
20mA
10mA
5mA
1.5
Ambient temperature, °C
LED dropout voltage, V
531
-5 -3 -1
-100
-60
-20
60
20
40
100
-40
-80
-2-4 24
80
AQW210S
AQW214S
Voltage, V
Current, mA
060 100
10-3
10-6
10-9
10-12
AQW214S
20 40 80
AQW210S
Load voltage, V
Off state leakage current, A
10. Turn on time vs. LED forward current
characteristics
Measured portion: between terminals 5 and 6, 7 and 8;
Load voltage: Max. (DC); Continuous load current:
Max. (DC); Ambient temperature: 25°C 77°F
11. Turn off time vs. LED forward current
characteristics
Measured portion: between terminals 5 and 6, 7 and 8;
Load voltage: Max. (DC); Continuous load current:
Max. (DC); Ambient temperature: 25°C 77°F
12. Output capacitance vs. applied voltage
characteristics
Measured portion: between terminals 5 and 6, 7 and 8;
Frequency: 1 MHz;
Ambient temperature: 25°C 77°F
0
0.2
0.4
0.6
0.8
1.4
1.0
10 20 30 40 50 60
AQW214S
AQW210S
1.2
LED forward current, mA
Turn on time, ms
0
0.02
0.04
0.08
0.06
10 20 30 40
0.10
50
AQW210S
AQW214S
LED forward current, mA
Turn off time, ms
0
10
20
50
10 20 30 40 50
30
40
0Applied voltage, V
Output capacitance, pF
