19-1680; Rev 1; 2/03 12V, Ultra-Low IQ, Low-Dropout Linear Regulators Features 2A Supply Current Reverse-Battery Protection +2.5V to +12V Input Voltage Range Fixed 1.8V, 2.5V, 3.3V, and 5V Output Voltages (MAX1726) Adjustable 1.5V to 5V Output Voltages (MAX1725) 20mA Guaranteed Output Current 1.5% Output Voltage Accuracy Small 1F Output Capacitor Short-Circuit Protection Thermal Protection Tiny 5-Pin SOT23 Package Ordering Information ________________________Applications Smoke Detectors PART Remote Transmitters TEMP RANGE PINPACKAGE TOP MARK ADNK Smart Battery Packs MAX1725EUK-T -40C to +85C 5 SOT23-5 Industrial Control Systems MAX1726EUK18-T -40C to +85C 5 SOT23-5 ADNL MAX1726EUK25-T -40C to +85C 5 SOT23-5 ADNM MAX1726EUK33-T -40C to +85C 5 SOT23-5 ADNN MAX1726EUK5-T -40C to +85C 5 SOT23-5 ADNO Microcontroller Power Real-Time Clock Backup Power PDAs and Handy-Terminals Note: See the Selector Guide for the MAX1725/MAX1726 output options as they relate to the part number suffix. Battery-Powered Alarms Typical Operating Circuit VIN 2.5V TO 12V IN OUT MAX1726 ON OFF SHDN GND OUTPUT 1.5V TO 5V Selector Guide PART OUTPUT VOLTAGE (V) MAX1725EUK-T Adj 1.5 to 5.0 MAX1726EUK18-T Fixed 1.8 MAX1726EUK25-T Fixed 2.5 MAX1726EUK33-T Fixed 3.3 MAX1726EUK50-T Fixed 5.0 Pin Configuration appears at end of data sheet. ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 MAX1725/MAX1726 General Description The MAX1725/MAX1726 are ultra-low supply current, low-dropout linear regulators intended for low-power applications that demand the longest possible battery life. Unlike inferior PNP-based designs, the MAX1725/ MAX1726s' PMOS pass elements maintain an ultra-low 2A supply current throughout their entire operating range and in dropout. Despite their ultra-low power consumption, the MAX1725/MAX1726 have tight output accuracy (1.5%) and require just 1F output capacitance to achieve good load-transient response. These regulators have a wide input voltage range (+2.5V to +12V), making them excellent choices for systems powered from two lithium-ion (Li+) cells and 9V batteries. Other features include reverse-battery protection, short-circuit protection, and thermal protection. The MAX1725 provides an adjustable 1.5V to 5V output using an external resistor-divider. The MAX1726 provides factory preset 1.8V, 2.5V, 3.3V, or 5V output voltages (see the Ordering Information). Both devices are available in a tiny 5-pin SOT23 package. MAX1725/MAX1726 12V, Ultra-Low IQ, Low-Dropout Linear Regulators ABSOLUTE MAXIMUM RATINGS IN to GND ................................................................-14V to +14V SHDN to GND ..............................................-0.3V to (VIN + 0.3V) (-0.3V to + 0.3V when VIN < 0V) OUT, FB (MAX1725 only) to GND...................-0.3V to +6V when VIN >5.7V; -0.3V to (VIN + 0.3V) when 0V < VIN < 5.7V; -0.3V to +0.3V when VIN < 0V OUT Continuous Current...................................................200mA OUT Short Circuit...........................................................Indefinite Continuous Power Dissipation (TA = +70C) 5-Pin SOT23-5 (derate 7.1mW/C above +70C) ........571mW JA ...............................................................................+140C/W Junction Temperature ......................................................+150C Operating Temperature Range ...........................-40C to +85C Storage Temperature Range .............................-65C to +150C Lead Temperature (soldering, 10s) .................................+300C Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS (Circuit of Figure 1, VIN = VOUT + 1V, SHDN = IN, IOUT = 1mA, TA = -40C to +85C, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER SYMBOL CONDITIONS Input Voltage Range VIN (Note 2) Supply Current IIN VIN = 12V Shutdown Supply Current OUT Voltage Range FB Voltage IIN(SHDN) VOUT VFB TYP MAX 12 V 2 4.5 A 0.7 2 A 5 V 2.5 SHDN = 0V, VIN = 12V, VOUT = 0V MAX1725 only 1.5 MAX1725 only (Note 3) 1.245 TA = +25C OUT Voltage Accuracy (Note 3) MIN UNITS V -1.5 1.5 TA = 0C to +85C -2 +2 TA = -40C to +85C -3 +3 % Line Regulation VLNR VIN = 2.5V or (VOUT + 0.5V) to 12V 0.01 0.3 %/V Load Regulation VLDR IOUT = 1mA to 20mA, VIN = (VOUT + 1V) or 3V (min) 0.015 0.15 %/mA Maximum OUT Current IOUT VIN = (VOUT + 1V) or 3V (Note 4) Dropout Voltage (Note 4) VDO IOUT = 20mA for VOUT 2.5V, IOUT = 10mA for VOUT < 2.5V, not applicable for VOUT < 1.9V 300 VIN = 12V, VOUT = 0V 40 Foldback Current Limit SHDN Input Threshold SHDN Input Bias Current FB Input Bias Current (MAX1725 only) ISC VIH VIL I SHDN IFB VFB = 1.25V 80 mA 600 0.5 TA = +25C -50 TA = +85C TA = +25C TA = +85C +50 0.1 -20 2 mV mA 2 VIN = 2.5V to 12V V SHDN = 0V to 12V 20 +20 1.5 nA nA IN Reverse Leakage Current VIN = -12V, V SHDN = 0V 0.01 Thermal-Shutdown Threshold Temperature rising 150 C 15 C Thermal-Shutdown Hysteresis 2 _______________________________________________________________________________________ 10 V A 12V, Ultra-Low IQ, Low-Dropout Linear Regulators (Circuit of Figure 1, VIN = VOUT + 1V, SHDN = IN, IOUT = 1mA, TA = -40C to +85C, unless otherwise noted. Typical values are at TA = +25C.) (Note 1) PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS OUT Line-Transient Overshoot/Undershoot VIN = 0.25V, tR = tF = 5s 15 mV OUT Load-Transient Overshoot/Undershoot IOUT from 1mA to 10mA, tR = tF = 1s 200 mV f = 10Hz to 100kHz 350 VRMS OUT Noise Note 1: Note 2: Note 3: Note 4: en Limits are 100% production tested at +25C. All temperature limits are guaranteed by design. Guaranteed by OUT line-regulation testing. OUT accuracy from nominal voltage. The MAX1725 is tested at VOUT = 1.5V, 2.5V, and 5V. When VOUT falls to 4% below its value at VIN = VOUT + 1V. Typical Operating Characteristics (VOUT = +3.3V, IOUT = 1mA, TA = +25C, unless otherwise noted.) 2 3 2 5 6 7 8 9 10 11 2 0 0 12 3 1 0 4 VIN = 5V 4 1 0 MAX1725/26 toc03 MAX1725/26 toc02 4 1 5 10 15 -40 20 -20 0 20 40 60 TEMPERATURE (C) OUTPUT VOLTAGE vs. INPUT VOLTAGE OUTPUT VOLTAGE vs. LOAD CURRENT NORMALIZED OUTPUT VOLTAGE vs. TEMPERATURE -0.4 ILOAD = 1mA -0.6 -0.8 -1.0 ILOAD = 20mA -1.2 0.6 0.4 0.2 0 -0.2 -0.4 -0.6 -0.8 -1.4 4 5 6 7 8 9 INPUT VOLTAGE (V) 10 11 12 0.30 80 MAX1725/26 toc06 NOMINAL OUTPUT = 3.3V VIN = 4.5V NORMALIZED OUTPUT VOLTAGE (%) -0.2 0.8 OUTPUT VOLTAGE (% DEVIATION) NOMINAL OUTPUT = 3.3V MAX1725/26 toc05 LOAD CURRENT (mA) MAX1725/26 toc04 INPUT VOLTAGE (V) 0 OUTPUT VOLTAGE (%DEVIATION) VIN = 5V 5 SUPPLY CURRENT (A) 3 5 SUPPLY CURRENT (A) MAX1725/26 toc01 SUPPLY CURRENT (A) 4 SUPPLY CURRENT vs. TEMPERATURE SUPPLY CURRENT vs. LOAD CURRENT SUPPLY CURRENT vs. INPUT VOLTAGE 5 0.20 0.10 IOUT = 1mA 0 -0.10 -0.20 -0.30 0 2 4 6 8 10 12 14 16 18 20 LOAD CURRENT (mA) -40 -20 0 20 40 60 80 TEMPERATURE (C) _______________________________________________________________________________________ 3 MAX1725/MAX1726 ELECTRICAL CHARACTERISTICS (continued) Typical Operating Characteristics (continued) (VOUT = +3.3V, IOUT = 1mA, TA = +25C, unless otherwise noted.) POWER-SUPPLY REJECTION RATIO vs. FREQUENCY 200 VIN = 5V VOUT = 3.3V RL = 3.3k COUT = 1F 70 60 PSRR (dB) TA = +25C 150 LINE-TRANSIENT RESPONSE VIN 200mV/div 50 40 30 100 VOUT 20mV/div 20 TA = -40C 50 10 0 0 5 10 15 20 0.01 0.1 LOAD CURRENT (mA) 1 10 100s/div 100 FREQUENCY (kHz) LOAD TRANSIENT IOUT 20mA/div TURN-ON/TURN-OFF RESPONSE MAX1725/26 toc10 COUT = 1F IOUT = 1mA - 20mA MAX1725/26 toc11 0 COUT = 1F IOUT = 1mA VSHDN 2V/div VOUT 100mV/div VOUT 1V/div 400s/div Pin Description PIN NAME FUNCTION MAX1725 MAX1726 4 COUT = 1F IOUT = 1mA 1 1 IN Supply Voltage Input 2 2 GND Ground 3 3 OUT Voltage Output 4 -- FB -- 4 GND Ground 5 5 SHDN Active-Low Shutdown Input 4ms Detailed Description The MAX1725/MAX1726 are low-dropout, low-quiescentcurrent linear regulators designed primarily for batterypowered applications (Figure 1). The MAX1725 provides an adjustable output voltage from 1.5V to 5V using an external resistor-divider. The MAX1726 supplies preset output voltages of 1.8V, 2.5V, 3.3V, or 5V. These devices consist of a +1.245V error amplifier, MOSFET driver, and P-channel pass transistor (Figure 2). Feedback Voltage Input _______________________________________________________________________________________ MAX1725/26 toc09 TA = +85C 250 80 MAX1725/26 toc07 300 MAX1725/26 toc08 DROPOUT VOLTAGE vs. LOAD CURRENT DROPOUT VOLTAGE (mV) MAX1725/MAX1726 12V, Ultra-Low IQ, Low-Dropout Linear Regulators 12V, Ultra-Low IQ, Low-Dropout Linear Regulators INPUT 2.5V TO 12V CIN 1F OUTPUT 1.5V TO 5V IN OUT R1 MAX1725 ON SHDN OFF COUT 1F FB GND R2 1.2M pass to the output. The output voltage is fed back through either an internal resistor voltage-divider connected to OUT (MAX1726) or an external resistor network connected to FB (MAX1725). Additional features include an output current limiter, reverse-battery protection, a thermal sensor, and shutdown logic. Internal P-Channel Pass Transistor The MAX1725/MAX1726 feature a P-channel MOSFET pass transistor. This provides advantages over similar designs using PNP pass transistors, including longer battery life. The P-channel MOSFET requires no base drive, which reduces quiescent current considerably. PNP-based regulators waste considerable current in dropout when the pass transistor saturates; they also use high base-drive currents under large loads. The MAX1725/MAX1726 do not suffer from these problems, and consume only 2A of quiescent current throughout their load range (see the Typical Operating Characteristics). Shutdown To enter shutdown, drive the SHDN pin below 0.5V. When the MAX1725/MAX1726 are shut down, the output Figure 1. Typical Application Circuit IN OUT MAX1725 MAX1726 BIAS CIRCUITRY THERMAL SHUTDOWN 1.245V (MAX1726 ONLY) SHDN FB (MAX1725 ONLY) GND Figure 2. Functional Diagram _______________________________________________________________________________________ 5 MAX1725/MAX1726 The error amplifier compares 1.245V to the selected feedback voltage and amplifies the difference. If the feedback voltage is lower than 1.245V, the pass-transistor gate is pulled lower, allowing more current to pass, and thus increasing the output voltage. If the feedback voltage is higher than 1.245V, the pass-transistor gate is driven higher, allowing less current to MAX1725/MAX1726 12V, Ultra-Low IQ, Low-Dropout Linear Regulators pass transistor shuts off, the output falls to ground, and supply current drops from 2A to 0.7A. Connect SHDN to IN for normal operation. If reverse-battery protection is needed, drive SHDN through a 100k resistor. Thermal-Overload Protection Thermal-overload protection limits total power dissipation in the MAX1725/MAX1726. When the junction temperature exceeds T J = +150C, the thermal sensor signals the shutdown logic, turning off the pass transistor and allowing the IC to cool. The thermal sensor turns the pass transistor on again after the IC's junction temperature cools by 15C, resulting in a pulsed output during continuous thermal-overload conditions. Thermal-overload protection is designed to protect the devices in the event of fault conditions. For continuous operation, do not exceed the absolute maximum junction temperature rating of TJ = +150C. Foldback Current Limiting The MAX1725/MAX1726 also include a foldback current limiter. When the output is shorted to ground, the output PMOS drive is limited so that the output current does not exceed 40mA (typ). The output can be shorted to ground indefinitely without damaging the part. Reverse-Battery Protection The MAX1725/MAX1726 have a unique protection scheme that limits the reverse supply current to less than 10A when VIN is forced below ground. The circuitry monitors the polarity of the input, disconnecting the internal circuitry and parasitic diodes when the battery is reversed. This feature prevents the device, battery, and load from overheating and electrical stress. For reverse-battery protection, drive SHDN through a 100k resistor. Applications Information The MAX1725 features an adjustable output voltage from 1.5V to 5V, using two external resistors connected as a voltage-divider to FB (Figure 1). The MAX1725 is optimized for operation with R2 = 1.2M. The output voltage is set by the following equation: R1 VOUT = VFB 1 + R2 where typically VFB = 1.245V. To simplify resistor selection: V R1 = R2 OUT - 1 VFB Choose R2 = 1.2M for best accuracy. Power-Supply Rejection and Operation from Sources Other than Batteries The MAX1725/MAX1726 are designed to deliver low dropout voltages and low quiescent currents in batterypowered systems. Power-supply rejection is 60dB at low frequencies and rolls off above 100Hz. At high frequencies, the output capacitor is the major contributor to the rejection of power-supply noise (see the Power-Supply Rejection Ratio vs. Frequency graph in the Typical Operating Characteristics). When operating from sources other than batteries, improve supply-noise rejection and transient response by increasing the value of the input and output capacitors, and by using passive filtering techniques (see the Supply and Load Transient Response graph in the Typical Operating Characteristics). Chip Information TRANSISTOR COUNT: 112 Capacitor Selection and Regulator Stability For general purposes, use a 1F capacitor on the MAX1725/MAX1726 input and output. Larger input capacitor values and lower ESR provide better supplynoise rejection and transient response. A higher-value input capacitor (10F) may be necessary if large, fast transients are anticipated and the device is located several inches from the power source. For stable operation over the full temperature range, use a minimum of 1F on the output. Output Voltage Selection For fixed 1.8V, 2.5V, 3.3V, or 5V output voltages, use the MAX1726. 6 Pin Configuration TOP VIEW IN 1 GND 2 SHDN 4 FB (GND) MAX1725 MAX1726 OUT 3 ( ) ARE FOR MAX1726 ONLY. 5 SOT23-5 _______________________________________________________________________________________ 12V, Ultra-Low IQ, Low-Dropout Linear Regulators SOT5L.EPS Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 _____________________7 (c) 2003 Maxim Integrated Products Printed USA is a registered trademark of Maxim Integrated Products. MAX1725/MAX1726 Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages.)