（Radial Lead Type Aluminum Electrolytic Capacitors）
CATALOG
Electrolytic Capacitors
2014
industrial.panasonic.com/ww/
2014.11
.
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-63 –
010
Sleeve
14 min.
3 min.
L=
Pressure relief
06.3
=L16 : L±1.0 (=08L15, 016L15, 018L15 : L±1.5)
L20 : L±2.0
+
–
08
0D±0.5
F±0.5
0D±0.5
fd±0.05
■ Features
● Endurance : 105 °C 1000 h to 5000 h
● Low impedance
● AEC-Q200 qualifi ed✽
● RoHS directive compliant
Radial Lead Type
Series: FC Type: A
■ Speci cations
Category Temp. Range –55 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 10 0 V.DC
Nominal Cap. Range 2.2 μF to 15000 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan d
W.V. (V) 6.3 10 16 25 35 50 63 100 (120 Hz/+20 °C)
tan d0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07
For capacitance value > 1000 μF, add 0.02 per every 1000 μF.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum of DC
and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to
20 °C, the capacitors shall meet the limits specifi ed bellow.
Duration : 04 to 06.3: 1000 hours, 08: 2000 hours , 010: 3000 hours , 012.5 to 018: 5000 hours
Capacitance change ±20 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized at +20 °C,
capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.(V.DC) Cap (μF) Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 100
2.2 to 330 0.55 0.65 0.85 0.90 1.00
390 to 1000 0.70 0.75 0.90 0.95 1.00
1200 to 2200 0.75 0.80 0.90 0.95 1.00
2700 to 15000 0.80 0.85 0.95 1.00 1.00
■ Frequency correction factor for ripple current
L>11 L=7
Body Dia. 0D 4 5 6.3 8 10 12.5 16 18 4 5 6.3
Body Length L
15 to 25 30 to 40
Lead Dia. 0d 0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8 0.45 0.45 0.45
Lead space F 1.5 2.0 2.5 3.5 5.0 5.0 5.0 7.5 7.5 1.5 2.0 2.5
■ Di men sions in mm (not to scale) (Unit : mm)
✽ This product qualify for AEC-Q200, but it has some deviations.
05 Jul. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-64 –
■ Case size/ Impedance/ Ripple Current
W.V(V.DC) 6.3 V to 35 V 50 V 63 V 100 V
Case size
(0D×L)
Imped ance
(Ω)/(100 kHz)
Ripple
Current
(mA r.m.s)
/(100 kHz)
Imped ance
(Ω)/(100 kHz)
Ripple
Current
(mA r.m.s)
/(100 kHz)
Imped ance
(Ω)/(100 kHz)
Ripple
Current
(mA r.m.s)
/(100 kHz)
Imped ance
(Ω)/(100 kHz)
Ripple
Current
(mA r.m.s)
/(100 kHz)
20 °C –10 °C 20 °C –10 °C 20 °C –10 °C 20 °C –10 °C
4 × 7 2.00 5.00 65
5 × 70.9502.40 120
6.3 × 70.4501.20 200
4 × 11 1.302.60 1202.505.00 903.507.00 80
5 × 11 0 .8 0 0 1.6 0 17 5 ✽✽ ✽
2.00 4.00 145 4.10 8.20 80
5 × 15 0.500 1.00 235 0.900 1.80 215 1.30 2.60 200 2.80 5.60 90
6.3 × 11.2 0.350 0.700 290 0.600 1.20 260 1.00 2.00 240 1.80 3.60 114
6.3 × 15 0.250 0.500 400 0.400 0.800 360 0.700 1.40 330 1.10 2.20 155
8 × 11.5 0.117 0.234 555 0.234 0.468 485 0.342 0.684 405 0.680 1.36 260
8 × 15 0.085 0.170 730 0.155 0.310 635 0.230 0.460 535 0.450 0.900 340
8 × 20 0.065 0.130 995 0.120 0.240 860 0.178 0.356 690 0.330 0.660 455
10 × 12.5 0.090 0.180 755 0.162 0.324 615 0.256 0.512 535 0.530 1.06 306
10 × 16 0.068 0.136 1050 0.119 0.238 850 0.194 0.388 600 0.360 0.720 400
10 × 20 0.052 0.104 1220 0.090 0.180 1030 0.147 0.294 885 0.240 0.480 463
10 × 25 0.045 0.090 1440 0.082 0.164 1200 0.130 0.260 1050 0.210 0.420 599
10 × 30 0.035 0.070 1815 0.060 0.120 1610 0.090 0.180 1300 0.150 0.300 698
12.5 × 15 0.065 0.130 1205 0.110 0.220 1150 0.150 0.300 1020 0.230 0.460 511
12.5 × 20 0.038 0.076 1655 0.063 0.126 1480 0.085 0.170 1285 0.180 0.360 671
12.5 × 25 0.030 0.060 1945 0.050 0.100 1832 0.070 0.140 1720 0.110 0.220 807
12.5 × 30 0.025 0.050 2310 0.040 0.080 2215 0.055 0.110 2090 0.098 0.196 937
12.5 × 35 0.022 0.044 2510 0.034 0.068 2285 0.047 0.094 2265 0.087 0.174 1040
12.5 × 40 0.018 0.036 2655 0.030 0.060 2590 0.042 0.084 2560 0.072 0.144 1130
16 × 15 0.043 0.086 1690 0.080 0.160 1610 0.090 0.180 1410 0.140 0.280 793
16 × 20 0.029 0.058 2205 0.048 0.096 1835 0.059 0.118 1765 0.110 0.220 995
16 × 25 0.022 0.044 2555 0.034 0.068 2235 0.050 0.100 2160 0.089 0.178 1170
16 × 31.5 0.018 0.036 3010 0.028 0.056 2700 0.043 0.086 2670 0.062 0.124 1520
16 × 35.5 0.016 0.032 3150 0.025 0.050 2790 0.036 0.072 2770 0.053 0.106 1730
16 × 40 0.015 0.030 3360 0.023 0.046 2845 0.030 0.060 2825 0.047 0.094 1920
18 × 15 0.038 0.076 2000 0.068 0.136 1900 0.086 0.172 1690 0.120 0.240 917
18 × 20 0.028 0.056 2490 0.042 0.084 2420 0.055 0.110 2290 0.080 0.160 1230
18 × 25 0.020 0.040 2740 0.029 0.058 2610 0.043 0.086 2585 0.070 0.140 1420
18 × 31.5 0.016 0.032 3635 0.025 0.050 3000 0.032 0.064 2950 0.062 0.124 1600
18 × 35.5 0.015 0.030 3680 0.023 0.046 3100 0.030 0.060 3095 0.041 0.082 1770
18 × 40 0.014 0.028 3735 – – – 0.025 0.050 3205 0.036 0.072 2300
✽
Case size
(0D×L)
Capacitance
(μF)
Imped ance (Ω)/(100 kHz) Ripple Current
(mA r.m.s)(100 kHz)
20 °C –10 °C
5 × 11
1.0 2.40 4.80 20
2.2 1.80 3.60 45
3.3 1.30 2.60 65
4.7 1.30 2.60 95
10 1.30 2.60 125
12 1.30 2.60 135
15 1.30 2.60 145
18 1.30 2.60 155
22 1.30 2.60 155
05 Jul. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-65 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
6.3
27 4 7 65 2.000 1000 0.45 1.5 5.0 2.5
EEAFC0J270( )
200 2000
56 5 7 120 0.950 1000 0.45 2.0 5.0 2.5
EEAFC0J560( )
200 2000
68 4 11 120 1.300 1000 0.45 1.5 5.0 2.5
EEUFC0J680( )✽✽✽
200 2000
100 5 11 175 0.800 1000 0.50 2.0 5.0 2.5
EEUFC0J101( )
200 2000
120 6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5
EEAFC0J121( )
200 2000
150 5 15 235 0.500 1000 0.50 2.0 5.0 2.5
EEUFC0J151( )✽✽✽
200 2000
220 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5
EEUFC0J221( )
200 2000
270 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5
EEUFC0J271( )
200 2000
330 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5
EEUFC0J331S( )
200 2000
6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5
EEUFC0J331( )✽✽✽
200 2000
390 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC0J391( )
200 1000
470 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC0J471( )
200 1000
560 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC0J561( )
200 1000
820 8 15 730 0.085 2000 0.60 3.5 5.0
EEUFC0J821L( )
200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0
EEUFC0J821( )
200 500
1000 10 12.5 755 0.090 3000 0.60 5.0 5.0
EEUFC0J102( )
200 500
1200 8 20 995 0.065 2000 0.60 3.5 5.0
EEUFC0J122L( )
200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0
EEUFC0J122( )
200 500
1500 10 20 1220 0.052 3000 0.60 5.0 5.0
EEUFC0J152( )
200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0
EEUFC0J152S( )
200 500
1800 10 25 1440 0.045 3000 0.60 5.0 5.0
EEUFC0J182( )
200 500
2200 10 25 1440 0.045 3000 0.60 5.0 5.0
EEUFC0J222( )
200 500
16 15 1690 0.043 5000 0.80 7.5 7.5
EEUFC0J222S( )
100 250
2700
10 30 1815 0.035 3000 0.60 5.0
EEUFC0J272L
100
12.5 20 1655 0.038 5000 0.60 5.0 5.0
EEUFC0J272( )
200 500
16 15 1690 0.043 5000 0.80 7.5 7.5
EEUFC0J272S( )
100 250
3300 12.5 20 1655 0.038 5000 0.60 5.0 5.0
EEUFC0J332( )
200 500
18 15 2000 0.038 5000 0.80 7.5 7.5
EEUFC0J332S( )
100 250
3900 12.5 25 1945 0.030 5000 0.60 5.0 5.0
EEUFC0J392( )
200 500
4700 12.5 30 2310 0.025 5000 0.80 5.0
EEUFC0J472
100
16 20 2205 0.029 5000 0.80 7.5 7.5
EEUFC0J472S( )
100 250
5600 12.5 35 2510 0.022 5000 0.80 5.0
EEUFC0J562L
100
16 20 2205 0.029 5000 0.80 7.5 7.5
EEUFC0J562( )
100 250
6800
12.5 40 2655 0.018 5000 0.80 5.0
EEUFC0J682L
100
16 25 2555 0.022 5000 0.80 7.5 7.5
EEUFC0J682( )
100 250
18 20 2490 0.028 5000 0.80 7.5 7.5
EEUFC0J682S( )
100 250
8200 16 31.5 3010 0.018 5000 0.80 7.5
EEUFC0J822
100
10000 16 35.5 3150 0.016 5000 0.80 7.5
EEUFC0J103
100
18 25 2740 0.020 5000 0.80 7.5 7.5
EEUFC0J103S( )
100 250
12000 16 40 3360 0.015 5000 0.80 7.5
EEUFC0J123L
100
18 31.5 3635 0.016 5000 0.80 7.5
EEUFC0J123
50
15000 18 35.5 3680 0.015 5000 0.80 7.5
EEUFC0J153
50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 30/Jun/2015
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
05 Jul. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-66 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
10
22 4 7 65 2.000 1000 0.45 1.5 5.0 2.5
EEAFC1A220( )
200 2000
39 5 7 120 0.950 1000 0.45 2.0 5.0 2.5
EEAFC1A390( )
200 2000
47 4 11 120 1.300 1000 0.45 1.5 5.0 2.5
EEUFC1A470( )✽✽✽
200 2000
82 5 11 175 0.800 1000 0.50 2.0 5.0 2.5
EEUFC1A820( )
200 2000
6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5
EEAFC1A820( )
200 2000
100 5 11 175 0.800 1000 0.50 2.0 5.0 2.5
EEUFC1A101S( )
200 2000
5 15 235 0.500 1000 0.50 2.0 5.0 2.5
EEUFC1A101( )✽✽✽
200 2000
150 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5
EEUFC1A151( )
200 2000
180 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5
EEUFC1A181( )
200 2000
220 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5
EEUFC1A221S( )
200 2000
6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5
EEUFC1A221( )✽✽✽
200 2000
330 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC1A331( )
200 1000
390 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC1A391( )
200 1000
470 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC1A471( )
200 1000
560 10 12.5 755 0.090 3000 0.60 5.0 5.0
EEUFC1A561( )
200 500
680 8 15 730 0.085 2000 0.60 3.5 5.0
EEUFC1A681L( )
200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0
EEUFC1A681( )
200 500
820 10 16 1050 0.068 3000 0.60 5.0 5.0
EEUFC1A821( )
200 500
1000 8 20 995 0.065 2000 0.60 3.5 5.0
EEUFC1A102L( )
200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0
EEUFC1A102( )
200 500
1200 10 20 1220 0.052 3000 0.60 5.0 5.0
EEUFC1A122( )
200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0
EEUFC1A122S( )
200 500
1500 10 25 1440 0.045 3000 0.60 5.0 5.0
EEUFC1A152( )
200 500
1800 12.5 20 1655 0.038 5000 0.60 5.0 5.0
EEUFC1A182( )
200 500
16 15 1690 0.043 5000 0.80 7.5 7.5
EEUFC1A182S( )
100 250
2200 10 30 1815 0.035 3000 0.60 5.0
EEUFC1A222L
100
12.5 20 1655 0.038 5000 0.60 5.0 5.0
EEUFC1A222( )
200 500
2700 12.5 25 1945 0.030 5000 0.60 5.0 5.0
EEUFC1A272( )
200 500
18 15 2000 0.038 5000 0.80 7.5 7.5
EEUFC1A272S( )
100 250
3300 12.5 30 2310 0.025 5000 0.80 5.0
EEUFC1A332
100
16 20 2205 0.029 5000 0.80 7.5 7.5
EEUFC1A332S( )
100 250
3900 12.5 35 2510 0.022 5000 0.80 5.0
EEUFC1A392L
100
16 20 2205 0.029 5000 0.80 7.5 7.5
EEUFC1A392( )
100 250
4700 12.5 40 2655 0.018 5000 0.80 5.0
EEUFC1A472L
100
16 25 2555 0.022 5000 0.80 7.5 7.5
EEUFC1A472( )
100 250
5600 16 25 2555 0.022 5000 0.80 7.5 7.5
EEUFC1A562( )
100 250
18 20 2490 0.028 5000 0.80 7.5 7.5
EEUFC1A562S( )
100 250
6800 16 31.5 3010 0.018 5000 0.80 7.5
EEUFC1A682
100
18 25 2740 0.020 5000 0.80 7.5 7.5
EEUFC1A682S( )
100 250
8200 16 35.5 3150 0.016 5000 0.80 7.5
EEUFC1A822L
100
18 31.5 3635 0.016 5000 0.80 7.5
EEUFC1A822
50
10000 18 35.5 3680 0.015 5000 0.80 7.5
EEUFC1A103
50
12000 18 40 3735 0.014 5000 0.80 7.5
EEUFC1A123
50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 30/Jun/2015
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
05 Jul. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-67 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
16
15 4 7 65 2.000 1000 0.45 1.5 5.0 2.5
EEAFC1C150( )
200 2000
27 5 7 120 0.950 1000 0.45 2.0 5.0 2.5
EEAFC1C270( )
200 2000
39 4 11 120 1.30 1000 0.45 1.5 5.0 2.5
EEUFC1C390( )✽✽✽
200 2000
47 5 11 175 0.800 1000 0.50 2.0 5.0 2.5
EEUFC1C470( )
200 2000
56 5 11 175 0.800 1000 0.50 2.0 5.0 2.5
EEUFC1C560( )
200 2000
6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5
EEAFC1C560( )
200 2000
68 5 11 175 0.800 1000 0.50 2.0 5.0 2.5
EEUFC1C680( )
200 2000
82 5 15 235 0.500 1000 0.50 2.0 5.0 2.5
EEUFC1C820( )✽✽✽
200 2000
100 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5
EEUFC1C101( )
200 2000
120 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5
EEUFC1C121( )
200 2000
180 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5
EEUFC1C181( )✽✽✽
200 2000
220 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC1C221( )
200 1000
270 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC1C271( )
200 1000
330 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC1C331( )
200 1000
390 10 12.5 755 0.090 3000 0.60 5.0 5.0
EEUFC1C391( )
200 500
470 8 15 730 0.085 2000 0.60 3.5 5.0
EEUFC1C471L( )
200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0
EEUFC1C471( )
200 500
560 10 16 1050 0.068 3000 0.60 5.0 5.0
EEUFC1C561( )
200 500
680 8 20 995 0.065 2000 0.60 3.5 5.0
EEUFC1C681L( )
200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0
EEUFC1C681( )
200 500
820 10 20 1220 0.052 3000 0.60 5.0 5.0
EEUFC1C821( )
200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0
EEUFC1C821S( )
200 500
1000 10 20 1220 0.052 3000 0.60 5.0 5.0
EEUFC1C102S( )
200 500
10 25 1440 0.045 3000 0.60 5.0 5.0
EEUFC1C102( )
200 500
1200 10 25 1440 0.045 3000 0.60 5.0 5.0
EEUFC1C122( )
200 500
16 15 1690 0.043 5000 0.80 7.5 7.5
EEUFC1C122S( )
100 250
1500
10 30 1815 0.035 3000 0.60 5.0
EEUFC1C152L
100
12.5 20 1655 0.038 5000 0.60 5.0 5.0
EEUFC1C152( )
200 500
16 15 1690 0.043 5000 0.80 7.5 7.5
EEUFC1C152S( )
100 250
1800 12.5 25 1945 0.030 5000 0.60 5.0 5.0
EEUFC1C182( )
200 500
18 15 2000 0.038 5000 0.80 7.5 7.5
EEUFC1C182S( )
100 250
2200 12.5 25 1945 0.030 5000 0.60 5.0 5.0
EEUFC1C222( )
200 500
16 20 2205 0.029 5000 0.80 7.5 7.5
EEUFC1C222S( )
100 250
2700 12.5 30 2310 0.025 5000 0.80 5.0
EEUFC1C272L
100
16 20 2205 0.029 5000 0.80 7.5 7.5
EEUFC1C272( )
100 250
3300 12.5 35 2510 0.022 5000 0.80 5.0
EEUFC1C332
100
18 20 2490 0.028 5000 0.80 7.5 7.5
EEUFC1C332S( )
100 250
3900 16 25 2555 0.022 5000 0.80 7.5 7.5
EEUFC1C392( )
100 250
18 20 2490 0.028 5000 0.80 7.5 7.5
EEUFC1C392S( )
100 250
4700 16 31.5 3010 0.018 5000 0.80 7.5
EEUFC1C472
100
18 25 2740 0.020 5000 0.80 7.5 7.5
EEUFC1C472S( )
100 250
5600 16 35.5 3150 0.016 5000 0.80 7.5
EEUFC1C562L
100
18 31.5 3635 0.016 5000 0.80 7.5
EEUFC1C562
50
6800 16 40 3360 0.015 5000 0.80 7.5
EEUFC1C682
100
8200 18 35.5 3680 0.015 5000 0.80 7.5
EEUFC1C822
50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 30/Jun/2015
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
05 Jul. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-68 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
25
10 4 7 65 2.000 1000 0.45 1.5 5.0 2.5
EEAFC1E100( )
200 2000
22 5 7 120 0.950 1000 0.45 2.0 5.0 2.5
EEAFC1E220( )
200 2000
27 4 11 120 1.30 1000 0.45 1.5 5.0 2.5
EEUFC1E270( )✽✽✽
200 2000
39 5 11 175 0.800 1000 0.50 2.0 5.0 2.5
EEUFC1E390( )
200 2000
6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5
EEAFC1E390( )
200 2000
47 5 11 175 0.800 1000 0.50 2.0 5.0 2.5
EEUFC1E470( )
200 2000
56 5 15 235 0.500 1000 0.50 2.0 5.0 2.5
EEUFC1E560( )✽✽✽
200 2000
82 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5
EEUFC1E820( )
200 2000
100 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5
EEUFC1E101S( )
200 2000
120 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5
EEUFC1E121( )✽✽✽
200 2000
180 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC1E181( )
200 1000
220 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC1E221( )
200 1000
270 10 12.5 755 0.090 3000 0.60 5.0 5.0
EEUFC1E271( )
200 500
330 8 15 730 0.085 2000 0.60 3.5 5.0
EEUFC1E331L( )
200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0
EEUFC1E331( )
200 500
390 10 16 1050 0.068 3000 0.60 5.0 5.0
EEUFC1E391( )
200 500
470 8 20 995 0.065 2000 0.60 3.5 5.0
EEUFC1E471L( )
200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0
EEUFC1E471( )
200 500
560 10 20 1220 0.052 3000 0.60 5.0 5.0
EEUFC1E561( )
200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0
EEUFC1E561S( )
200 500
680 10 20 1220 0.052 3000 0.60 5.0 5.0
EEUFC1E681( )
200 500
820 10 25 1440 0.045 3000 0.60 5.0 5.0
EEUFC1E821( )
200 500
12.5 20 1655 0.038 5000 0.60 5.0 5.0
EEUFC1E821S( )
200 500
1000
10 30 1815 0.035 3000 0.60 5.0
EEUFC1E102L
100
12.5 20 1655 0.038 5000 0.60 5.0 5.0
EEUFC1E102( )
200 500
16 15 1690 0.043 5000 0.80 7.5 7.5
EEUFC1E102S( )
100 250
1200 12.5 25 1945 0.030 5000 0.60 5.0 5.0
EEUFC1E122( )
200 500
18 15 2000 0.038 5000 0.80 7.5 7.5
EEUFC1E122S( )
100 250
1500 12.5 25 1945 0.030 5000 0.60 5.0 5.0
EEUFC1E152( )
200 500
16 20 2205 0.029 5000 0.80 7.5 7.5
EEUFC1E152S( )
100 250
1800 12.5 30 2310 0.025 5000 0.80 5.0
EEUFC1E182L
100
16 20 2205 0.029 5000 0.80 7.5 7.5
EEUFC1E182( )
100 250
2200 12.5 35 2510 0.022 5000 0.80 5.0
EEUFC1E222
100
18 20 2490 0.028 5000 0.80 7.5 7.5
EEUFC1E222S( )
100 250
2700 16 25 2555 0.022 5000 0.80 7.5 7.5
EEUFC1E272( )
100 250
3300 16 31.5 3010 0.018 5000 0.80 7.5
EEUFC1E332
100
18 25 2740 0.020 5000 0.80 7.5 7.5
EEUFC1E332S( )
100 250
3900 16 35.5 3150 0.016 5000 0.80 7.5
EEUFC1E392L
100
18 31.5 3635 0.016 5000 0.80 7.5
EEUFC1E392
50
4700 18 35.5 3680 0.015 5000 0.80 7.5
EEUFC1E472
50
5600 18 40 3735 0.014 5000 0.80 7.5
EEUFC1E562
50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 30/Jun/2015
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
05 Jul. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-69 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
35
6.8 4 7 65 2.000 1000 0.45 1.5 5.0 2.5
EEAFC1V6R8( )
200 2000
12 5 7 120 0.950 1000 0.45 2.0 5.0 2.5
EEAFC1V120( )
200 2000
18 4 11 120 1.300 1000 0.45 1.5 5.0 2.5
EEUFC1V180( )✽✽✽
200 2000
22 5 11 175 0.800 1000 0.50 2.0 5.0 2.5
EEUFC1V220( )
200 2000
27 5 11 175 0.800 1000 0.50 2.0 5.0 2.5
EEUFC1V270( )
200 2000
6.3 7 200 0.450 1000 0.45 2.5 5.0 2.5
EEAFC1V270( )
200 2000
33 5 11 175 0.080 1000 0.50 2.0 5.0 2.5
EEUFC1V330( )
200 2000
39 5 15 235 0.500 1000 0.50 2.0 5.0 2.5
EEUFC1V390( )✽✽✽
200 2000
47 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5
EEUFC1V470( )
200 2000
56 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5
EEUFC1V560( )
200 2000
68 6.3 11.2 290 0.350 1000 0.50 2.5 5.0 2.5
EEUFC1V680( )
200 2000
82 6.3 15 400 0.250 1000 0.50 2.5 5.0 2.5
EEUFC1V820( )✽✽✽
200 2000
100 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC1V101( )
200 1000
120 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC1V121( )
200 1000
150 8 11.5 555 0.117 2000 0.60 3.5 5.0
EEUFC1V151( )
200 1000
180 10 12.5 755 0.090 3000 0.60 5.0 5.0
EEUFC1V181( )
200 500
220 8 15 730 0.085 2000 0.60 3.5 5.0
EEUFC1V221L( )
200 1000
10 12.5 755 0.090 3000 0.60 5.0 5.0
EEUFC1V221( )
200 500
270 10 16 1050 0.068 3000 0.60 5.0 5.0
EEUFC1V271( )
200 500
330 8 20 995 0.065 2000 0.60 3.5 5.0
EEUFC1V331L( )
200 1000
10 16 1050 0.068 3000 0.60 5.0 5.0
EEUFC1V331( )
200 500
390 10 20 1220 0.052 3000 0.60 5.0 5.0
EEUFC1V391( )
200 500
12.5 15 1205 0.065 5000 0.60 5.0 5.0
EEUFC1V391S( )
200 500
470 10 20 1220 0.052 3000 0.60 5.0 5.0
EEUFC1V471( )
200 500
560 10 25 1440 0.045 3000 0.60 5.0 5.0
EEUFC1V561( )
200 500
12.5 20 1655 0.038 5000 0.60 5.0 5.0
EEUFC1V561S( )
200 500
680
10 30 1815 0.035 3000 0.60 5.0
EEUFC1V681L
100
12.5 20 1655 0.038 5000 0.60 5.0 5.0
EEUFC1V681( )
200 500
16 15 1690 0.043 5000 0.80 7.5 7.5
EEUFC1V681S( )
100 250
820 12.5 25 1945 0.030 5000 0.60 5.0 5.0
EEUFC1V821L( )
200 500
18 15 2000 0.038 5000 0.80 7.5 7.5
EEUFC1V821( )
100 250
1000 12.5 25 1945 0.030 5000 0.60 5.0 5.0
EEUFC1V102( )
200 500
16 20 2205 0.029 5000 0.80 7.5 7.5
EEUFC1V102S( )
100 250
1200 12.5 30 2310 0.025 5000 0.80 5.0
EEUFC1V122L
100
16 20 2205 0.029 5000 0.80 7.5 7.5
EEUFC1V122( )
100 250
1500
12.5 35 2510 0.022 5000 0.80 5.0
EEUFC1V152L
100
16 25 2555 0.022 5000 0.80 7.5 7.5
EEUFC1V152( )
100 250
18 20 2490 0.028 5000 0.80 7.5 7.5
EEUFC1V152S( )
100 250
1800
12.5 40 2655 0.018 5000 0.80 5.0
EEUFC1V182L
100
16 25 2555 0.022 5000 0.80 7.5 7.5
EEUFC1V182( )
100 250
18 20 2490 0.028 5000 0.80 7.5 7.5
EEUFC1V182S( )
100 250
2200 16 31.5 3010 0.018 5000 0.80 7.5
EEUFC1V222
100
18 25 2740 0.020 5000 0.80 7.5 7.5
EEUFC1V222S( )
100 250
2700 16 35.5 3150 0.016 5000 0.80 7.5
EEUFC1V272L
100
18 31.5 3635 0.016 5000 0.80 7.5
EEUFC1V272
50
3300 18 35.5 3680 0.015 5000 0.80 7.5
EEUFC1V332
50
3900 18 40 3735 0.014 5000 0.80 7.5
EEUFC1V392
50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 30/Jun/2015
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
05 Jul. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-70 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
50
1.0 5 11 20 2.400 1000 0.50 2.0 5.0 2.5
EEUFC1H1R0( )✽✽
200 2000
2.2 5 11 45 1.800 1000 0.50 2.0 5.0 2.5
EEUFC1H2R2( )
200 2000
3.3 5 11 65 1.300 1000 0.50 2.0 5.0 2.5
EEUFC1H3R3( )
200 2000
4.7 5 11 95 1.300 1000 0.50 2.0 5.0 2.5
EEUFC1H4R7( )
200 2000
10 4 11 90 2.500 1000 0.45 1.5 5.0 2.5
EEUFC1H100( )✽✽✽
200 2000
5 11 125 1.300 1000 0.50 2.0 5.0 2.5
EEUFC1H100L( )
200 2000
12 5 11 135 1.300 1000 0.50 2.0 5.0 2.5
EEUFC1H120( )
200 2000
15 5 11 145 1.300 1000 0.50 2.0 5.0 2.5
EEUFC1H150( )
200 2000
18 5 11 155 1.300 1000 0.50 2.0 5.0 2.5
EEUFC1H180( )
200 2000
22 5 11 155 1.300 1000 0.50 2.0 5.0 2.5
EEUFC1H220( )
200 2000
27 5 15 215 0.900 1000 0.50 2.0 5.0 2.5
EEUFC1H270( )✽✽✽
200 2000
33 6.3 11.2 260 0.600 1000 0.50 2.5 5.0 2.5
EEUFC1H330( )
200 2000
39 6.3 11.2 260 0.600 1000 0.50 2.5 5.0 2.5
EEUFC1H390( )
200 2000
47 6.3 11.2 260 0.600 1000 0.50 2.5 5.0 2.5
EEUFC1H470( )
200 2000
56 6.3 15 360 0.400 1000 0.50 2.5 5.0 2.5
EEUFC1H560( )✽✽✽
200 2000
68 8 11.5 485 0.234 2000 0.60 3.5 5.0
EEUFC1H680( )
200 1000
82 8 11.5 485 0.234 2000 0.60 3.5 5.0
EEUFC1H820( )
200 1000
100 10 12.5 615 0.162 3000 0.60 5.0 5.0
EEUFC1H101( )
200 500
120 8 15 635 0.155 2000 0.60 3.5 5.0
EEUFC1H121L( )
200 1000
10 12.5 615 0.162 3000 0.60 5.0 5.0
EEUFC1H121( )
200 500
150 10 16 850 0.119 3000 0.60 5.0 5.0
EEUFC1H151( )
200 500
180 8 20 860 0.120 2000 0.60 3.5 5.0
EEUFC1H181L( )
200 1000
10 16 850 0.119 3000 0.60 5.0 5.0
EEUFC1H181( )
200 500
220 10 20 1030 0.090 3000 0.60 5.0 5.0
EEUFC1H221( )
200 500
12.5 15 1150 0.110 5000 0.60 5.0 5.0
EEUFC1H221S( )
200 500
270 10 25 1200 0.082 3000 0.60 5.0 5.0
EEUFC1H271( )
200 500
330 10 30 1610 0.060 3000 0.60 5.0
EEUFC1H331L
100
12.5 20 1480 0.063 5000 0.60 5.0 5.0
EEUFC1H331( )
200 500
390 12.5 20 1480 0.063 5000 0.60 5.0 5.0
EEUFC1H391( )
200 500
16 15 1610 0.080 5000 0.80 7.5 7.5
EEUFC1H391S( )
100 250
470 10 30 1610 0.060 3000 0.60 5.0
EEUFC1H471L
100
12.5 25 1832 0.050 5000 0.60 5.0 5.0
EEUFC1H471( )
200 500
560 12.5 25 1832 0.050 5000 0.60 5.0 5.0
EEUFC1H561( )
200 500
18 15 1900 0.068 5000 0.80 7.5 7.5
EEUFC1H561S( )
100 250
680 12.5 30 2215 0.040 5000 0.80 5.0
EEUFC1H681L
100
16 20 1835 0.048 5000 0.80 7.5 7.5
EEUFC1H681( )
100 250
820 12.5 35 2285 0.034 5000 0.80 5.0
EEUFC1H821L
100
18 20 2420 0.042 5000 0.80 7.5 7.5
EEUFC1H821( )
100 250
1000 12.5 40 2590 0.030 5000 0.80 5.0
EEUFC1H102L
100
16 25 2235 0.034 5000 0.80 7.5 7.5
EEUFC1H102( )
100 250
1200 16 31.5 2700 0.028 5000 0.80 7.5
EEUFC1H122
100
18 25 2610 0.029 5000 0.80 7.5 7.5
EEUFC1H122S( )
100 250
1500 16 35.5 2790 0.025 5000 0.80 7.5
EEUFC1H152L
100
1800 16 40 2845 0.023 5000 0.80 7.5
EEUFC1H182L
100
18 31.5 3000 0.025 5000 0.80 7.5
EEUFC1H182
50
2200 18 35.5 3100 0.023 5000 0.80 7.5
EEUFC1H222
50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽ Please kindly accept last shipment : 31/Mar/2015
✽✽✽ Please kindly accept last shipment : 30/Jun/2015
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
05 Jul. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-71 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
63
6.8 4 11 80 3.500 1000 0.45 1.5 5.0 2.5
EEUFC1J6R8( )✽✽✽
200 2000
12 5 11 145 2.000 1000 0.50 2.0 5.0 2.5
EEUFC1J120( )
200 2000
18 5 15 200 1.300 1000 0.50 2.0 5.0 2.5
EEUFC1J180( )✽✽✽
200 2000
22 6.3 11.2 240 1.000 1000 0.50 2.5 5.0 2.5
EEUFC1J220( )
200 2000
33 6.3 11.2 240 1.000 1000 0.50 2.5 5.0 2.5
EEUFC1J330( )
200 2000
39 6.3 15 330 0.700 1000 0.50 2.5 5.0 2.5
EEUFC1J390( )✽✽✽
200 2000
47 8 11.5 405 0.342 2000 0.60 3.5 5.0
EEUFC1J470( )
200 1000
56 8 11.5 405 0.342 2000 0.60 3.5 5.0
EEUFC1J560( )
200 1000
68 8 11.5 405 0.342 2000 0.60 3.5 5.0
EEUFC1J680( )
200 1000
82 10 12.5 535 0.256 3000 0.60 5.0 5.0
EEUFC1J820( )
200 500
100 8 15 535 0.230 2000 0.60 3.5 5.0
EEUFC1J101L( )
200 1000
10 12.5 535 0.256 3000 0.60 5.0 5.0
EEUFC1J101( )
200 500
120 10 16 600 0.194 3000 0.60 5.0 5.0
EEUFC1J121( )
200 500
150 8 20 690 0.178 2000 0.60 3.5 5.0
EEUFC1J151( )
200 1000
180 10 20 885 0.147 3000 0.60 5.0 5.0
EEUFC1J181( )
200 500
12.5 15 1020 0.150 5000 0.60 5.0 5.0
EEUFC1J181S( )
200 500
220
10 20 885 0.147 3000 0.60 5.0 5.0
EEUFC1J221X( )
200 500
10 25 1050 0.130 3000 0.60 5.0 5.0
EEUFC1J221( )
200 500
12.5 20 1285 0.085 5000 0.60 5.0 5.0
EEUFC1J221S( )
200 500
270 16 15 1410 0.090 5000 0.80 7.5 7.5
EEUFC1J271( )
100 250
330 10 30 1300 0.090 3000 0.60 5.0
EEUFC1J331L
100
12.5 20 1285 0.085 5000 0.60 5.0 5.0
EEUFC1J331( )
200 500
390 12.5 25 1720 0.070 5000 0.60 5.0 5.0
EEUFC1J391( )
200 500
18 15 1690 0.086 5000 0.80 7.5 7.5
EEUFC1J391S( )
100 250
470 12.5 30 2090 0.055 5000 0.80 5.0
EEUFC1J471L
100
16 20 1765 0.059 5000 0.80 7.5 7.5
EEUFC1J471( )
100 250
560 16 25 2160 0.050 5000 0.80 7.5 7.5
EEUFC1J561( )
100 250
680
12.5 35 2265 0.047 5000 0.80 5.0
EEUFC1J681L
100
16 25 2160 0.050 5000 0.80 7.5 7.5
EEUFC1J681( )
100 250
18 20 2290 0.055 5000 0.80 7.5 7.5
EEUFC1J681S( )
100 250
820
12.5 40 2560 0.042 5000 0.80 5.0
EEUFC1J821L
100
16 31.5 2670 0.043 5000 0.80 7.5
EEUFC1J821
100
18 25 2585 0.043 5000 0.80 7.5 7.5
EEUFC1J821S( )
100 250
1000 16 31.5 2670 0.043 5000 0.80 7.5
EEUFC1J102U
100
16 35.5 2770 0.036 5000 0.80 7.5
EEUFC1J102
100
1200 16 40 2825 0.030 5000 0.80 7.5
EEUFC1J122L
100
18 31.5 2950 0.032 5000 0.80 7.5
EEUFC1J122
50
1500 18 35.5 3095 0.030 5000 0.80 7.5
EEUFC1J152
50
1800 18 40 3205 0.025 5000 0.80 7.5
EEUFC1J182
50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 30/Jun/2015
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
05 Jul. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FC
– EEE-72 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
100
5.6 5 11 80 4.10 1000 0.5 2.0 5.0 2.5
EEUFC2A5R6( )
200 2000
8.2 5 15 90 2.80 1000 0.5 2.0 5.0 2.5
EEUFC2A8R2( )✽✽✽
200 2000
12 6. 3 11.2 114 1.80 10 0 0 0.5 2. 5 5.0 2.5
EEUFC2A120( )
200 2000
18 6.3 15 155 1.10 1000 0.5 2.5 5.0 2.5
EEUFC2A180( )✽✽✽
200 2000
22 8 11.5 260 0.680 2000 0.6 3.5 5.0
EEUFC2A220( )
200 1000
33 8 15 340 0.450 2000 0.6 3.5 5.0
EEUFC2A330L( )
200 1000
10 12.5 306 0.530 3000 0.6 5.0 5.0
EEUFC2A330( )
200 500
39 8 20 455 0.330 2000 0.6 5.0 5.0
EEUFC2A390L( )
200 1000
10 16 400 0.360 3000 0.6 5.0 5.0
EEUFC2A390( )
200 500
56 10 20 463 0.240 3000 0.6 5.0 5.0
EEUFC2A560( )
200 500
68 10 25 599 0.210 3000 0.6 5.0 5.0
EEUFC2A680L( )
200 500
12.5 15 511 0.230 5000 0.6 5.0 5.0
EEUFC2A680( )
200 500
100 10 30 698 0.150 3000 0.6 5.0
EEUFC2A101L
100
12.5 20 671 0.180 5000 0.6 5.0 5.0
EEUFC2A101( )
200 500
120 16 15 793 0.140 5000 0.8 7.5 7.5
EEUFC2A121S( )
100 250
150 12.5 25 807 0.110 5000 0.6 5.0 5.0
EEUFC2A151( )
200 500
18 15 917 0.120 5000 0.8 7.5 7.5
EEUFC2A151S( )
100 250
180 12.5 30 937 0.098 5000 0.8 5.0
EEUFC2A181L
100
16 20 995 0.110 5000 0.8 7.5 7.5
EEUFC2A181( )
100 250
220 12.5 35 1040 0.087 5000 0.8 5.0
EEUFC2A221L
100
16 25 1170 0.089 5000 0.8 7.5 7.5
EEUFC2A221( )
100 250
270 12.5 40 1130 0.072 5000 0.8 5.0
EEUFC2A271L
100
18 20 1230 0.080 5000 0.8 7.5 7.5
EEUFC2A271S( )
100 250
330 16 31.5 1520 0.062 5000 0.8 7.5
EEUFC2A331
100
18 25 1420 0.070 5000 0.8 7.5 7.5
EEUFC2A331S( )
100 250
390 16 35.5 1730 0.053 5000 0.8 7.5
EEUFC2A391L
100
18 31.5 1600 0.062 5000 0.8 7.5
EEUFC2A391
50
470 16 40 1920 0.047 5000 0.8 7.5
EEUFC2A471
100
560 18 35.5 1770 0.041 5000 0.8 7.5
EEUFC2A561
50
680 18 40 2300 0.036 5000 0.8 7.5
EEUFC2A681
50
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 30/Jun/2015
Endurance : 105 °C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h
05 Jul. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-73 –
010
Sleeve
14 min.
3 min.
L=
=L16 : L±1.5
L20 : L±2.0
Pressure relief +
–
08
0D±0.5
F±0.5
0D±0.5
fd±0.05
■ Features
● Low impedance (10 % to 30 % less than FC Se ries)
Miniaturization (30 % to 40 % less than FC Series)
● Endurance : 3000 h to 5000 h at +105 °C
● AEC-Q200 qualifi ed✽
● RoHS directive compliant
Radial Lead Type
Series: FK Type: A
■ Speci cations
Category Temp. Range –55 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 35 V.DC
Nominal Cap. Range 180 μF to 12000 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV (μA) After 2 minutes
tan d
W.V. 6.3 10 16 25 35
tan d0.22 0.19 0.16 0.14 0.12 (120 Hz/+20 °C)
Add 0.02 per 1000 μF for products of 1000 μF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed bellow.
Duration : 08: 3000 hours , 010: 4000 hours , 012.5 to 018: 5000 hours
Capacitance change ±20 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.(V.DC) Cap (μF) Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 35
180 to 330 0.60 0.70 0.85 0.95 1.00
390 to 1000 0.65 0.75 0.90 0.98 1.00
1200 to 12000 0.75 0.80 0.95 1.00 1.00
■ Frequency correction factor for ripple current
Body Dia. fD810 12.5 1618
Body Length L — — 12.5 to 25 30 to 40 — —
Lead Dia. fd 0.6 0.6 0.6 0.8 0.8 0.8
Lead space F 3.5 5.0 5.0 5.0 7.5 7.5
■ Di men sions in mm (not to scale) (Unit : mm)
✽ This product qualify for AEC-Q200, but it has some deviations.
01 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-74 –
■ Case size/Impedance/Ripple current
Case size
(0D×L)
Imped ance
(Ω)/(100 kHz)
Ripple Current
(mA r.m.s.)/(100 kHz)
+20 °C –10 °C +105 °C
8 × 11.5 0.090 0.180 630
8 × 15 0.062 0.124 860
8 × 20 0.044 0.088 1220
10 × 12.5 0.063 0.126 900
10 × 16 0.049 0.098 1240
10 × 20 0.035 0.070 1490
10 × 25 0.033 0.066 1680
10 × 30 0.025 0.050 2140
12.5 × 15 0.048 0.096 1400
12.5 × 20 0.029 0.058 1890
12.5 × 25 0.022 0.044 2280
12.5 × 30 0.018 0.036 2720
12.5 × 35 0.016 0.032 2940
12.5 × 40 0.014 0.028 3010
16 × 15 0.038 0.076 1800
16 × 20 0.026 0.052 2330
16 × 25 0.019 0.038 2760
18 × 15 0.036 0.072 2060
18 × 20 0.025 0.050 2640
18 × 25 0.018 0.036 2850
01 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-75 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C
)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (pcs) (pcs)
6.3
680 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK0J681( ) 200 1000
1000 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK0J102L( ) 200 1000
10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK0J102( ) 200 500
1500 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK0J152L( ) 200 1000
10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK0J152( ) 200 500
1800 12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK0J182S( ) 200 500
2200 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK0J222( ) 200 500
10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK0J222L( ) 200 500
3300
10 30 2140 0.025 4000 0.6 5.0 EEUFK0J332L 100
12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK0J332( ) 200 500
16 15 1800 0.038 5000 0.8 7.5 7.5 EEUFK0J332S( ) 100 250
4700 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK0J472( ) 200 500
18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK0J472S( ) 100 250
5600 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK0J562L 100
16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK0J562S( ) 100 250
6800 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK0J682L 100
8200
12.5 40 3010 0.014 5000 0.8 5.0 EEUFK0J822L 100
16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK0J822( ) 100 250
18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK0J822S( ) 100 250
12000 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK0J123S( ) 100 250
10
560 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK1A561( ) 200 1000
820 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK1A821L( ) 200 1000
10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK1A821( ) 200 500
1200 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK1A122L( ) 200 1000
10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK1A122( ) 200 500
1500 12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK1A152S( ) 200 500
1800 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK1A182( ) 200 500
10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK1A182L( ) 200 500
2700
10 30 2140 0.025 4000 0.6 5.0 EEUFK1A272L 100
12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK1A272( ) 200 500
16 15 1800 0.038 5000 0.8 7.5 7.5 EEUFK1A272S( ) 100 250
3900 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK1A392( ) 200 500
18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK1A392S( ) 100 250
4700 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK1A472L 100
16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK1A472S( ) 100 250
5600 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK1A562L 100
6800
12.5 40 3010 0.014 5000 0.8 5.0 EEUFK1A682L 100
16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK1A682( ) 100 250
18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK1A682S( ) 100 250
8200 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK1A822S( ) 100 250
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h
01 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-76 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C
)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (pcs) (pcs)
16
390 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK1C391( ) 200 1000
680 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK1C681L( ) 200 1000
10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK1C681( ) 200 500
820 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK1C821L( ) 200 1000
1000 10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK1C102( ) 200 500
1200 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK1C122( ) 200 500
12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK1C122S( ) 200 500
1500 10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK1C152L( ) 200 500
2200
10 30 2140 0.025 4000 0.6 5.0 EEUFK1C222L 100
12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK1C222( ) 200 500
16 15 1800 0.038 5000 0.8 7.5 7.5 EEUFK1C222S( ) 100 250
2700 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK1C272( ) 200 500
18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK1C272S( ) 100 250
3300 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK1C332L 100
3900 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK1C392L 100
16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK1C392S( ) 100 250
4700 12.5 40 3010 0.014 5000 0.8 5.0 EEUFK1C472L 100
18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK1C472S( ) 100 250
5600 16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK1C562( ) 100 250
6800 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK1C682S( ) 100 250
25
270 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK1E271( ) 200 1000
390 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK1E391L( ) 200 1000
470 10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK1E471( ) 200 500
560 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK1E561L( ) 200 1000
10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK1E561( ) 200 500
820 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK1E821( ) 200 500
12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK1E821S( ) 200 500
1000 10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK1E102L( ) 200 500
1200 12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK1E122( ) 200 500
1500 10 30 2140 0.025 4000 0.6 5.0 EEUFK1E152L 100
16 15 1800 0.038 5000 0.8 7.5 7.5 EEUFK1E152S( ) 100 250
1800 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK1E182( ) 200 500
18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK1E182S( ) 100 250
2200 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK1E222L 100
16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK1E222S( ) 100 250
2700 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK1E272L 100
3300
12.5 40 3010 0.014 5000 0.8 5.0 EEUFK1E332L 100
16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK1E332( ) 100 250
18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK1E332S( ) 100 250
4700 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK1E472S( ) 100 250
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h
01 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FK
– EEE-77 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C
)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (pcs) (pcs)
35
180 8 11.5 630 0.090 3000 0.6 3.5 5.0 EEUFK1V181( ) 200 1000
270 8 15 860 0.062 3000 0.6 3.5 5.0 EEUFK1V271L( ) 200 1000
10 12.5 900 0.063 4000 0.6 5.0 5.0 EEUFK1V271( ) 200 500
390 8 20 1220 0.044 3000 0.6 3.5 5.0 EEUFK1V391L( ) 200 1000
10 16 1240 0.049 4000 0.6 5.0 5.0 EEUFK1V391( ) 200 500
560 10 20 1490 0.035 4000 0.6 5.0 5.0 EEUFK1V561( ) 200 500
12.5 15 1400 0.048 5000 0.6 5.0 5.0 EEUFK1V561S( ) 200 500
680 10 25 1680 0.033 4000 0.6 5.0 5.0 EEUFK1V681L( ) 200 500
820 12.5 20 1890 0.029 5000 0.6 5.0 5.0 EEUFK1V821( ) 200 500
1000 10 30 2140 0.025 4000 0.6 5.0 EEUFK1V102L 100
16 15 1800 0.038 5000 0.8 7.5 7.5 EEUFK1V102S( ) 100 250
1200 12.5 25 2280 0.022 5000 0.6 5.0 5.0 EEUFK1V122( ) 200 500
18 15 2060 0.036 5000 0.8 7.5 7.5 EEUFK1V122S( ) 100 250
1500 12.5 30 2720 0.018 5000 0.8 5.0 EEUFK1V152L 100
1800 12.5 35 2940 0.016 5000 0.8 5.0 EEUFK1V182L 100
16 20 2330 0.026 5000 0.8 7.5 7.5 EEUFK1V182S( ) 100 250
2200
12.5 40 3010 0.014 5000 0.8 5.0 EEUFK1V222L 100
16 25 2760 0.019 5000 0.8 7.5 7.5 EEUFK1V222( ) 100 250
18 20 2640 0.025 5000 0.8 7.5 7.5 EEUFK1V222S( ) 100 250
3300 18 25 2850 0.018 5000 0.8 7.5 7.5 EEUFK1V332S( ) 100 250
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h
01 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FM
– EEE-78 –
010
Sleeve
14 min.
3 min.
L=
= L16 : L±1.5
L20 : L±2.0
Pressure relief
06.3+
–
08
0D±0.5
F±0.5
0D±0.5
fd±0.05
■ Features
● Low impedance (40 % to 70 % less than FC Se ries)
● Endurance : 2000 h to 7000 h at +105 °C
● RoHS directive compliant
Radial Lead Type
Series: FM Type: A
■ Speci cations
Category Temp. Range –40 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 50 V.DC
Nominal Cap. Range 22 μF to 6800 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV (μA) After 2 minutes
tan d
W.V. 6.3 10 16 25 35 50 (max.) (120 Hz/+20 °C)
tan d0.22 0.19 0.16 0.14 0.12 0.10
Add 0.02 per 1000 μF for products of 1000 μF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
05 to 06.3 : 2000 hours, 08×11.5 to 08×15: 3000 hours
08×20 to 010×16 : 4000 hours, 010×20 to 012.5×20/ 016×20: 5000 hours
012.5×25 to 012.5×35/ 016×25 : 7000 hours
Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %)
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.(V.DC) Cap (μF) Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 50
22 to 33 0.45 0.55 0.75 0.90 1.00
47 to 330 0.60 0.70 0.85 0.95 1.00
390 to 1000 0.65 0.75 0.90 0.98 1.00
1200 to 6800 0.75 0.80 0.95 1.00 1.00
■ Frequency correction factor for ripple current
Body Dia. 0D56.3810 12.5 16
Body Length L ————12.5 to 2530 to 40—
Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5
■ Attention
Not applicable for automotive
■ Di men sions in mm (not to scale) (Unit : mm)
01 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FM
– EEE-79 –
■ Case size/Impedance/Ripple current
W.V.(V.DC) 6.3 V to 35 V 50 V
Case size
(0D×L)
Imped ance
(Ω/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
Imped ance
(Ω/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
+20 °C –10 °C +105 °C +20 °C –10 °C +105 °C
5 × 11 0.300 1.000 280 0.340 1.130 250
6.3 × 11.2 0.130 0.430 455 0.140 0.460 405
8 × 11.5 0.056 0.168 950 0.061 0.183 870
8 × 15 0.041 0.123 1240 0.045 0.135 1140
8 × 20 0.030 0.090 1560 0.033 0.099 1430
10 × 12.5 0.038 0.114 1290 0.042 0.126 1170
10 × 16 0.026 0.078 1790 0.030 0.090 1650
10 × 20 0.019 0.057 2180 0.023 0.069 1890
10 × 25 0.018 0.054 2470 0.022 0.066 2150
12.5 × 20 0.018 0.045 2600 0.022 0.055 2260
12.5 × 25 0.015 0.038 3190 0.018 0.045 2660
12.5 × 30 0.013 0.033 3630 0.016 0.040 3160
12.5 × 35 0.012 0.030 3750 0.014 0.035 3270
16 × 20 0.017 0.043 3300 0.019 0.048 2870
16 × 25 0.014 0.035 3820 0.016 0.040 3320
01 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FM
– EEE-80 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Long
Lead Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
6.3
150 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM0J151( ) 200 2000
330 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM0J331( ) 200 2000
560 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM0J561( ) 200 1000
820 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM0J821L( ) 200 1000
1000 10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM0J102( ) 200 500
1200 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM0J122L( ) 200 1000
10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM0J122( ) 200 500
1500 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM0J152( ) 200 500
2200 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM0J222L( ) 200 500
3300 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM0J332( ) 200 500
3900 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM0J392( ) 200 500
4700 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM0J472L 100
5600 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM0J562L 100
16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM0J562S( ) 100 250
6800 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM0J682( ) 100 250
10
100 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1A101( ) 200 2000
220 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1A221( ) 200 2000
470 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1A471( ) 200 1000
680 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1A681L( ) 200 1000
10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1A681( ) 200 500
1000 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1A102L( ) 200 1000
10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1A102( ) 200 500
1200 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1A122( ) 200 500
1500 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1A152L( ) 200 500
2200 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1A222( ) 200 500
3300 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1A332( ) 200 500
3900 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1A392L 100
16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1A392S( ) 100 250
4700 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1A472L 100
5600 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1A562( ) 100 250
16
68 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1C680( ) 200 2000
120 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1C121( ) 200 2000
330 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1C331( ) 200 1000
470 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1C471L( ) 200 1000
10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1C471( ) 200 500
680 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1C681L( ) 200 1000
10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1C681( ) 200 500
1000 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1C102( ) 200 500
1200 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1C122L( ) 200 500
1500 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1C152( ) 200 500
2200 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1C222( ) 200 500
2700 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1C272L 100
16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1C272S( ) 100 250
3300 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1C332L 100
3900 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1C392( ) 100 250
· When requesting taped product, please put the letter "B" of "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
01 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FM
– EEE-81 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Long
Lead Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
25
47 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1E470( ) 200 2000
100 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1E101( ) 200 2000
220 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1E221( ) 200 1000
330 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1E331L( ) 200 1000
10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1E331( ) 200 500
470 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1E471L( ) 200 1000
10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1E471( ) 200 500
680 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1E681( ) 200 500
820 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1E821L( ) 200 500
1000 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1E102( ) 200 500
1500 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1E152( ) 200 500
1800 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1E182L 100
16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1E182S( ) 100 250
2200 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1E222L 100
2700 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1E272( ) 100 250
35
33 5 11 280 0.300 2000 0.5 2.0 5.0 2.5 EEUFM1V330( ) 200 2000
68 6.3 11.2 455 0.130 2000 0.5 2.5 5.0 2.5 EEUFM1V680( ) 200 2000
150 8 11.5 950 0.056 3000 0.6 3.5 5.0 EEUFM1V151( ) 200 1000
220 8 15 1240 0.041 3000 0.6 3.5 5.0 EEUFM1V221L( ) 200 1000
10 12.5 1290 0.038 4000 0.6 5.0 5.0 EEUFM1V221( ) 200 500
330 8 20 1560 0.030 4000 0.6 3.5 5.0 EEUFM1V331L( ) 200 1000
10 16 1790 0.026 4000 0.6 5.0 5.0 EEUFM1V331( ) 200 500
470 10 20 2180 0.019 5000 0.6 5.0 5.0 EEUFM1V471( ) 200 500
560 10 25 2470 0.018 5000 0.6 5.0 5.0 EEUFM1V561L( ) 200 500
680 12.5 20 2600 0.018 5000 0.6 5.0 5.0 EEUFM1V681( ) 200 500
1000 12.5 25 3190 0.015 7000 0.6 5.0 5.0 EEUFM1V102( ) 200 500
1200 12.5 30 3630 0.013 7000 0.8 5.0 EEUFM1V122L 100
16 20 3300 0.017 5000 0.8 7.5 7.5 EEUFM1V122S( ) 100 250
1500 12.5 35 3750 0.012 7000 0.8 5.0 EEUFM1V152L 100
1800 16 25 3820 0.014 7000 0.8 7.5 7.5 EEUFM1V182( ) 100 250
50
22 5 11 250 0.340 2000 0.5 2.0 5.0 2.5 EEUFM1H220( ) 200 2000
56 6.3 11.2 405 0.140 2000 0.5 2.5 5.0 2.5 EEUFM1H560( ) 200 2000
100 8 11.5 870 0.061 3000 0.6 3.5 5.0 EEUFM1H101( ) 200 1000
120 8 15 1140 0.045 3000 0.6 3.5 5.0 EEUFM1H121L( ) 200 1000
150 10 12.5 1170 0.042 4000 0.6 5.0 5.0 EEUFM1H151( ) 200 500
180 8 20 1430 0.033 4000 0.6 3.5 5.0 EEUFM1H181L( ) 200 1000
220 10 16 1650 0.030 4000 0.6 5.0 5.0 EEUFM1H221( ) 200 500
270 10 20 1890 0.023 5000 0.6 5.0 5.0 EEUFM1H271( ) 200 500
330 10 25 2150 0.022 5000 0.6 5.0 5.0 EEUFM1H331L( ) 200 500
470 12.5 20 2260 0.022 5000 0.6 5.0 5.0 EEUFM1H471( ) 200 500
560 12.5 25 2660 0.018 7000 0.6 5.0 5.0 EEUFM1H561( ) 200 500
680 12.5 30 3160 0.016 7000 0.8 5.0 EEUFM1H681L 100
820 12.5 35 3270 0.014 7000 0.8 5.0 EEUFM1H821L 100
16 20 2870 0.019 5000 0.8 7.5 7.5 EEUFM1H821S( ) 100 250
1000 16 25 3320 0.016 7000 0.8 7.5 7.5 EEUFM1H102( ) 100 250
· When requesting taped product, please put the letter "B" of "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
01 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FR
– EEE-82 –
010
Sleeve
14 min.
3 min.
L=
= L16 : L±1.5
L20 : L±2.0
Pressure relief
06.3+
–
08
0D±0.5
F±0.5
0D±0.5
fd±0.05
■ Country of origin
Malaysia
Radial Lead Type
Series: FR Type: A
■ Speci cations
Category Temp. Range –40 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 100 V.DC
Nominal Cap. Range 4.7 μF to 8200 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV (μA) After 2 minutes
tan d
W.V. 6.3 10 16 25 35 50 63 100 (120 Hz/+20 °C)
tan d0.22 0.19 0.16 0.14 0.12 0.10 0.09 0.08
Add 0.02 per 1000 μF for products of 1000 μF or more.
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
05×11/ 06.3×11.2 : 5000 hours
08×11.5/ 010×12.5 : 6000 hours (✽ Only EEUFR1V331U (010×12.5) 5000 hours)
08×15/ 010×16 : 8000 hours, 08×20 : 9000 hours
010×20 to 010×25/ 012.5×20 to 012.5×35/ 016×20 to 016×25 : 10000 hours
Capacitance change ±25 % of initial measured value (6.3 V to 10 V : ±30 %)
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■ Di men sions in mm (not to scale)
W.V.(V.DC) Cap (μF) Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 100
4.7 to 33 0.45 0.55 0.75 0.90 1.00
47 to 330 0.60 0.70 0.85 0.95 1.00
390 to 1000 0.65 0.75 0.90 0.98 1.00
1200 to 8200 0.75 0.80 0.95 1.00 1.00
■ Frequency correction factor for ripple current
Body Dia. 0D56.38 10 12.5 16
Body Length L————12.5 to 2530 to 35—
Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5
■ Features
● Low ESR (Same as FM Series)
● Endurance : 5000 h to 10000 h at +105 °C
● RoHS directive compliant
■ Attention
Not applicable for automotive
(Unit : mm)
06 Nov. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FR
– EEE-83 –
■ Case size/Impedance/Ripple current
W.V.(V.DC) 6.3 V to 35 V 50 V
Case size
(0D×L)
Imped ance
(Ω/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
Imped ance
(Ω/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
+20 °C –10 °C +105 °C +20 °C –10 °C +105 °C
5 × 11 0.300 1.000 280 0.340 1.130 250
6.3 × 11.2 0.130 0.430 455 0.140 0.460 405
8 × 11.5 0.056 0.168 950 0.061 0.183 870
8 × 15 0.041 0.123 1240 0.045 0.135 1140
8 × 20 0.030 0.090 1560 0.033 0.099 1430
10 × 12.5 0.043 0.114 1290 0.042 0.126 1170
10 × 16 0.028 0.078 1790 0.030 0.090 1650
10 × 20 0.020 0.057 2180 0.023 0.069 1890
10 × 25 0.018 0.054 2470 0.022 0.066 2150
12.5 × 20 0.018 0.045 2600 0.022 0.055 2260
12.5 × 25 0.015 0.038 3190 0.018 0.045 2660
12.5 × 30 0.013 0.033 3630 0.016 0.040 3160
12.5 × 35 0.012 0.030 3750 0.014 0.035 3270
16 × 20 0.017 0.043 3300 0.019 0.048 2870
16 × 25 0.014 0.035 3820 0.016 0.040 3320
W.V.(V.DC) 63 V
Case size
(0D×L)
Imped ance
(Ω/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
+20 °C –10 °C +105 °C
5 × 11 0.510 2.040 175
6.3 × 11.2 0.210 0.840 28 4
8 × 11.5 0.092 0.368 566
8 × 15 0.068 0.272 741
8 × 20 0.050 0.200 930
10 × 12.5 0.063 0.252 761
10 × 16 0.045 0.180 1073
10 × 20 0.035 0.140 1229
10 × 25 0.033 0.132 1500
12.5 × 20 0.033 0.125 1582
12.5 × 25 0.027 0.092 1995
12.5 × 30 0.024 0.082 2528
12.5 × 35 0.021 0.071 2780
16 × 20 0.029 0.093 2153
16 × 25 0.024 0.074 2988
W.V.(V.DC) 100 V
Case size
(0D×L)
Imped ance
(Ω/100 kHz)
Ripple Current
(mA r.m.s./100 kHz)
+20 °C –10 °C +105 °C
10 × 20 0.084 0.336 1500
06 Nov. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FR
– EEE-84 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
6.3
150 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR0J151( ) 200 2000
220 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR0J221( ) 200 2000
330 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR0J331( ) 200 2000
470 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR0J471( ) 200 2000
820 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR0J821( ) 200 1000
1000 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR0J102( ) 200 1000
1200 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR0J122L( ) 200 1000
10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR0J122( ) 200 500
1500 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR0J152L( ) 200 1000
1800 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR0J182( ) 200 500
2200 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR0J222( ) 200 500
2700 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR0J272L( ) 200 500
3300 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR0J332L( ) 200 500
3900 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR0J392( ) 200 500
4700 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR0J472( ) 200 500
5600 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR0J562L 100
6800 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR0J682L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR0J682S( ) 100 250
8200 16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR0J822( ) 100 250
10
100 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1A101( ) 200 2000
150 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1A151( ) 200 2000
220 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1A221( ) 200 2000
270 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1A271( ) 200 2000
470 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1A471( ) 200 1000
680 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1A681( ) 200 1000
820 10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR1A821( ) 200 500
1000 10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1A102( ) 200 500
8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1A102L( ) 200 1000
1500 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1A152L( ) 200 1000
10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1A152( ) 200 500
1800 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1A182( ) 200 500
2200 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1A222L( ) 200 500
3300 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR1A332( ) 200 500
3900 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR1A392( ) 200 500
4700 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1A472L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1A472S( ) 100 250
5600 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1A562L 100
6800 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1A682L 100
16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1A682( ) 100 250
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
06 Nov. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FR
– EEE-85 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
16
68 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1C680( ) 200 2000
100 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1C101( ) 200 2000
120 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1C121( ) 200 2000
220 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1C221( ) 200 2000
470 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1C471( ) 200 1000
680 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1C681L( ) 200 1000
10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR1C681( ) 200 500
1000 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1C102L( ) 200 1000
10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1C102( ) 200 500
1500 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1C152( ) 200 500
10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1C152L( ) 200 500
1800 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1C182L( ) 200 500
2200 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR1C222( ) 200 500
2700 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR1C272( ) 200 500
3300 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1C332L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1C332S( ) 100 250
3900 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1C392L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1C392S( ) 100 250
4700 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1C472L 100
16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1C472( ) 100 250
5600 16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1C562( ) 100 250
25
47 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1E470( ) 200 2000
68 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1E680( ) 200 2000
100 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1E101( ) 200 2000
150 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1E151( ) 200 2000
220 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1E221( ) 200 1000
330 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1E331( ) 200 1000
390 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1E391L( ) 200 1000
470
8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1E471Y( ) 200 1000
8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1E471L( ) 200 1000
10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR1E471( ) 200 500
560 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1E561L( ) 200 1000
680 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1E681L( ) 200 1000
10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1E681( ) 200 500
820 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1E821( ) 200 500
1000 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1E102( ) 200 500
10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1E102L( ) 200 500
1200 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1E122L( ) 200 500
1500 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR1E152( ) 200 500
1800 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR1E182( ) 200 500
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1E182S( ) 100 250
2200 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1E222L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1E222S( ) 100 250
2700 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1E272L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1E272S( ) 100 250
3300 16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1E332( ) 100 250
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
06 Nov. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ FR
– EEE-86 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
35
33 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 EEUFR1V330( ) 200 2000
68 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 EEUFR1V680( ) 200 2000
100 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1V101( ) 200 1000
180 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1V181( ) 200 1000
220 8 11.5 950 0.056 6000 0.6 3.5 5.0 EEUFR1V221( ) 200 1000
270 8 15 1240 0.041 8000 0.6 3.5 5.0 EEUFR1V271L( ) 200 1000
10 12.5 1290 0.043 6000 0.6 5.0 5.0 EEUFR1V271( ) 200 500
330 10 12.5 1330 0.043 5000 0.6 5.0 5.0 EEUFR1V331U( ) 200 500
390 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1V391L( ) 200 1000
470 8 20 1560 0.030 9000 0.6 3.5 5.0 EEUFR1V471L( ) 200 1000
10 16 1790 0.028 8000 0.6 5.0 5.0 EEUFR1V471( ) 200 500
560 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1V561( ) 200 500
680 10 20 2180 0.020 10000 0.6 5.0 5.0 EEUFR1V681( ) 200 500
10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1V681L( ) 200 500
820 10 25 2470 0.018 10000 0.6 5.0 5.0 EEUFR1V821L( ) 200 500
1000 12.5 20 2600 0.018 10000 0.6 5.0 5.0 EEUFR1V102( ) 200 500
1200 12.5 25 3190 0.015 10000 0.6 5.0 5.0 EEUFR1V122( ) 200 500
1500 12.5 30 3630 0.013 10000 0.8 5.0 EEUFR1V152L 100
16 20 3300 0.017 10000 0.8 7.5 7.5 EEUFR1V152S( ) 100 250
1800 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1V182L 100
16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1V182( ) 100 250
2200 12.5 35 3750 0.012 10000 0.8 5.0 EEUFR1V222L 100
16 25 3820 0.014 10000 0.8 7.5 7.5 EEUFR1V222( ) 100 250
50
4.7 5 11 185 0.620 5000 0.5 2.0 5.0 2.5 EEUFR1H4R7( ) 200 2000
10 5 11 250 0.340 5000 0.5 2.0 5.0 2.5 EEUFR1H100( ) 200 2000
22 5 11 250 0.340 5000 0.5 2.0 5.0 2.5 EEUFR1H220( ) 200 2000
47 6.3 11.2 405 0.140 5000 0.5 2.5 5.0 EEUFR1H470( ) 200 2000
56 6.3 11.2 405 0.140 5000 0.5 2.5 5.0 2.5 EEUFR1H560( ) 200 2000
100 8 11.5 870 0.061 6000 0.6 3.5 5.0 EEUFR1H101( ) 200 1000
120 8 15 1140 0.045 8000 0.6 3.5 5.0 EEUFR1H121L( ) 200 1000
150 10 12.5 1170 0.042 6000 0.6 5.0 5.0 EEUFR1H151( ) 200 500
180 8 20 1430 0.033 9000 0.6 3.5 5.0 EEUFR1H181L( ) 200 1000
220 10 16 1650 0.030 8000 0.6 5.0 5.0 EEUFR1H221( ) 200 500
270 10 20 1890 0.023 10000 0.6 5.0 5.0 EEUFR1H271( ) 200 500
330 10 25 2150 0.022 10000 0.6 5.0 5.0 EEUFR1H331L( ) 200 500
470 12.5 20 2260 0.022 10000 0.6 5.0 5.0 EEUFR1H471( ) 200 500
560 12.5 25 2660 0.018 10000 0.6 5.0 5.0 EEUFR1H561( ) 200 500
680 12.5 30 3160 0.016 10000 0.8 5.0 EEUFR1H681L 100
820 12.5 35 3270 0.014 10000 0.8 5.0 EEUFR1H821L 100
16 20 2870 0.019 10000 0.8 7.5 7.5 EEUFR1H821S( ) 100 250
1000 16 25 3320 0.016 10000 0.8 7.5 7.5 EEUFR1H102( ) 100 250
63
18 5 11 175 0.510 5000 0.5 2.0 5.0 2.5 EEUFR1J180( ) 200 2000
47 6.3 11.2 284 0.210 5000 0.5 2.5 5.0 2.5 EEUFR1J470( ) 200 2000
82 8 11.5 566 0.092 6000 0.6 3.5 5.0 EEUFR1J820( ) 200 1000
100 8 15 741 0.068 8000 0.6 3.5 5.0 EEUFR1J101L( ) 200 1000
10 12.5 761 0.063 6000 0.6 5.0 5.0 EEUFR1J101( ) 200 500
120 8 20 930 0.050 9000 0.6 3.5 5.0 EEUFR1J121L( ) 200 1000
10 16 1073 0.045 8000 0.6 5.0 5.0 EEUFR1J121( ) 200 500
150 8 20 930 0.050 9000 0.6 3.5 5.0 EEUFR1J151L( ) 200 1000
10 16 1073 0.045 8000 0.6 5.0 5.0 EEUFR1J151( ) 200 500
180 10 20 1229 0.035 10000 0.6 5.0 5.0 EEUFR1J181( ) 200 500
220 10 25 1500 0.033 10000 0.6 5.0 5.0 EEUFR1J221L( ) 200 500
270
10 20 1229 0.035 10000 0.6 5.0 5.0 EEUFR1J271U( ) 200 500
10 25 1500 0.033 10000 0.6 5.0 5.0 EEUFR1J271L( ) 200 500
12.5 20 1582 0.033 10000 0.6 5.0 5.0 EEUFR1J271( ) 200 500
330 12.5 20 1582 0.033 10000 0.6 5.0 5.0 EEUFR1J331( ) 200 500
390 12.5 25 1995 0.027 10000 0.6 5.0 5.0 EEUFR1J391( ) 200 500
470 12.5 25 1995 0.027 10000 0.6 5.0 5.0 EEUFR1J471( ) 200 500
560 12.5 30 2528 0.024 10000 0.8 5.0 EEUFR1J561L 100
16 20 2153 0.029 10000 0.8 7.5 7.5 EEUFR1J561S( ) 100 250
680 12.5 35 2780 0.021 10000 0.8 5.0 EEUFR1J681L 100
820 16 25 2988 0.024 10000 0.8 7.5 7.5 EEUFR1J821( ) 100 250
100 100 10 20 1500 0.084 10000 0.6 5.0 5.0 EEUFR2A101( ) 200 500
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
06 Nov. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EB
– EEE-87 –
0D±0.5
08010
F±0.5
Sleeve
14 min.
3 min.
L=
(08L15 only L±1.5)=L16 : L±1.0
L20 : L±2.0
Pressure relief
06.3+
–
0D±0.5
fd±0.05
■ Features
● Endurance : +105 °C 5000 h to 10000 h
● Hight ripple hight frequency (Hight Voltage)
● RoHS directive compliant
Radial Lead Type
Series: EB Type: A
■ Speci cations
Category Temp. Range –40 °C to +105 °C –25 °C to +105 °C
Rated W.V. Range 10 V.DC to 63 V.DC 160 V.DC to 450 V.DC
Nominal Cap. Range 2.2 μF to 3300 μF 10 μF to 330 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA)
After 2 minutes ap pli ca tion of rated working voltage at +20 °C (Whichever is greater)
tan dPlease see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when
the capacitors are restord to 20 °C, the capacitors shall meet the limits specified below.
(10 to 63 V.DC)
Duration : 05×11 to 08×11.5 : 5000 hours 08×15 to 012.5×25 : 10000 hours
Capacitance change ±30 % of initial measured value
tan d< 300 % of initial specifi ed value
DC leakage current < initial specifi ed value
(160 to 450 V.DC)
Duration : 5000 hours
Capacitance change ±20 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Body Dia. 0D 5 6.3 8 10 12.5 16 18
Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
■ Frequency correction factor for ripple current
(10 ~ 63 V.DC)
Capacitance
(μF)
Frequency (Hz)
60 120 1 k 10 k 100 k
2.2 to 10 0.75 1.00 1.40 1.55 1.65
22 to 470 0.85 1.00 1.20 1.25 1.30
1000 to 3300 0.95 1.00 1.05 1.10 1.15
W. V.
(V. DC)
Frequency (Hz)
120 1 k
10 k to 30k 30 k to 100k
160 to 250 0.55 0.85 0.90 1.00
350 to 450 0.50 0.80 0.90 1.00
■ Di men sions in mm (not to scale) (Unit : mm)
03 Jun. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EB
– EEE-88 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+10 5 °C)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
10
100 5 15 105 0.30 7000 0.5 2.0 5.0 2.5
EEUEB1A101( )✽✽✽
200 2000
5 11 66 0.30 5000 0.5 2.0 5.0 2.5
EEUEB1A101S( )
200 2000
220 6.3 15 152 0.30 7000 0.5 2.5 5.0 2.5
EEUEB1A221( )✽✽✽
200 2000
6.3 11.2 100 0.30 5000 0.5 2.5 5.0 2.5
EEUEB1A221S( )
200 2000
470 8 15 278 0.30 10000 0.6 3.5 5.0
EEUEB1A471( )
200 1000
8 11.5 180 0.30 5000 0.6 3.5 5.0
EEUEB1A471S( )
200 1000
2200 12.5 20 540 0.32 10000 0.6 5.0 5.0
EEUEB1A222( )
200 500
3300 12.5 25 802 0.34 10000 0.6 5.0 5.0
EEUEB1A332( )
200 500
16 1000 10 20 430 0.25 10000 0.6 5.0 5.0
EEUEB1C102( )
200 500
2200 12.5 25 706 0.27 10000 0.6 5.0 5.0
EEUEB1C222( )
200 500
25
47 5 15 78 0.22 7000 0.5 2.0 5.0 2.5
EEUEB1E470( )✽✽✽
200 2000
5 11 55 0.22 5000 0.5 2.0 5.0 2.5
EEUEB1E470S( )
200 2000
100 6.3 15 135 0.22 7000 0.5 2.5 5.0 2.5
EEUEB1E101( )✽✽✽
200 2000
6.3 11.2 95 0.22 5000 0.5 2.5 5.0 2.5
EEUEB1E101S( )
200 2000
220 8 11.5 125 0.22 5000 0.6 3.5 5.0
EEUEB1E221S( )
200 1000
330 8 15 255 0.22 10000 0.6 3.5 5.0
EEUEB1E331( )
200 1000
470 10 16 321 0.22 10000 0.6 5.0 5.0
EEUEB1E471( )
200 500
1000 12.5 20 498 0.22 10000 0.6 5.0 5.0
EEUEB1E102( )
200 500
35
33 5 15 66 0.18 7000 0.5 2.0 5.0 2.5
EEUEB1V330( )✽✽✽
200 2000
5 11 46 0.18 5000 0.5 2.0 5.0 2.5
EEUEB1V330S( )
200 2000
220 8 15 197 0.18 10000 0.6 3.5 5.0
EEUEB1V221( )
200 1000
330 10 16 278 0.18 10000 0.6 5.0 5.0
EEUEB1V331( )
200 500
470 10 20 349 0.18 10000 0.6 5.0 5.0
EEUEB1V471( )
200 500
1000 12.5 25 586 0.18 10000 0.6 5.0 5.0
EEUEB1V102( )
200 500
50
0.47 5 11 4 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1HR47S( )✽✽
200 2000
1 5 11 8 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1H1R0S( )✽✽
200 2000
2.2 5 11 15 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1H2R2S( )
200 2000
3.3 5 11 18 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1H3R3S( )
200 2000
4.7 5 11 18 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1H4R7S( )
200 2000
10 5 11 27 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1H100S( )
200 2000
22 5 15 55 0.15 7000 0.5 2.0 5.0 2.5
EEUEB1H220( )✽✽✽
200 2000
5 11 39 0.15 5000 0.5 2.0 5.0 2.5
EEUEB1H220S( )
200 2000
47 6.3 15 87 0.15 7000 0.5 2.5 5.0 2.5
EEUEB1H470( )✽✽✽
200 2000
6.3 11.2 61 0.15 5000 0.5 2.5 5.0 2.5
EEUEB1H470S( )
200 2000
100 8 11.5 99 0.15 5000 0.6 3.5 5.0
EEUEB1H101S( )
200 1000
220 10 16 234 0.15 10000 0.6 5.0 5.0
EEUEB1H221( )
200 500
330 10 20 293 0.15 10000 0.6 5.0 5.0
EEUEB1H331( )
200 500
470 12.5 20 370 0.15 10000 0.6 5.0 5.0
EEUEB1H471( )
200 500
63
0.47 5 15 6 0.12 7000 0.5 2.0 5.0 2.5
EEUEB1JR47( )✽✽
200 2000
5 11 4.5 0.12 5000 0.5 2.0 5.0 2.5
EEUEB1JR47S( )✽✽
200 2000
1 5 15 12 0.12 7000 0.5 2.0 5.0 2.5
EEUEB1J1R0( )✽✽
200 2000
5 11 9 0.12 5000 0.5 2.0 5.0 2.5
EEUEB1J1R0S( )✽✽
200 2000
2.2 5 11 16.5 0.12 5000 0.5 2.0 5.0 2.5
EEUEB1J2R2S( )
200 2000
3.3 5 15 30 0.12 7000 0.5 2.0 5.0 2.5
EEUEB1J3R3( )✽✽✽
200 2000
5 11 20 0.12 5000 0.5 2.0 5.0 2.5
EEUEB1J3R3S( )
200 2000
4.7 5 15 30 0.12 7000 0.5 2.0 5.0 2.5
EEUEB1J4R7( )✽✽✽
200 2000
5 11 23 0.12 5000 0.5 2.0 5.0 2.5
EEUEB1J4R7S( )
200 2000
10 5 15 46 0.12 7000 0.5 2.0 5.0 2.5
EEUEB1J100( )✽✽✽
200 2000
5 11 30 0.12 5000 0.5 2.0 5.0 2.5
EEUEB1J100S( )
200 2000
22 6.3 15 55 0.12 7000 0.5 2.5 5.0 2.5
EEUEB1J220( )✽✽✽
200 2000
6.3 11.2 40 0.12 5000 0.5 2.5 5.0 2.5
EEUEB1J220S( )
200 2000
33 6.3 15 71 0.12 7000 0.5 2.5 5.0 2.5
EEUEB1J330( )✽✽✽
200 2000
6.3 11.2 50 0.12 5000 0.5 2.5 5.0 2.5
EEUEB1J330S( )
200 2000
47 8 15 94 0.12 10000 0.6 3.5 5.0
EEUEB1J470( )
200 1000
8 11.5 80 0.12 5000 0.6 3.5 5.0
EEUEB1J470S( )
200 1000
100 8 15 180 0.12 10000 0.6 3.5 5.0
EEUEB1J101( )
200 1000
220 10 20 292 0.12 10000 0.6 5.0 5.0
EEUEB1J221( )
200 500
330 12.5 20 381 0.12 10000 0.6 5.0 5.0
EEUEB1J331( )
200 500
470 12.5 25 454 0.12 10000 0.6 5.0 5.0
EEUEB1J471( )
200 500
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽ Please kindly accept last shipment : 31/Mar/2015
✽✽✽ Please kindly accept last shipment : 30/Jun/2015
Endurance : 105 °C 05×11 to 08×11.5=5000 h, 05×15 to 06.3×15=7000 h, 08×15 to 012.5×25=10000 h
03 Jun. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EB
– EEE-89 –
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (pcs) (pcs)
160
22 10 20 470 0.15 5000 0.6 5.0 5.0 EEUEB2C220( ) 200 500
33 10 20 470 0.15 5000 0.6 5.0 5.0 EEUEB2C330( ) 200 500
47 12.5 20 600 0.15 5000 0.6 5.0 5.0 EEUEB2C470( ) 200 500
68 12.5 25 750 0.15 5000 0.6 5.0 5.0 EEUEB2C680( ) 200 500
16 20 750 0.15 5000 0.8 7.5 7.5 EEUEB2C680S( ) 100 250
100 16 25 1060 0.15 5000 0.8 7.5 7.5 EEUEB2C101( ) 100 250
18 20 1060 0.15 5000 0.8 7.5 7.5 EEUEB2C101S( ) 100 250
150 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2C151 100 –
18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2C151S( ) 100 250
220 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2C221 100 –
18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2C221S( ) 100 250
330 18 31.5 1690 0.15 5000 0.8 7.5 – EEUEB2C331 50 –
200
22 10 20 470 0.15 5000 0.6 5.0 5.0 EEUEB2D220( ) 200 500
33 12.5 20 600 0.15 5000 0.6 5.0 5.0 EEUEB2D330( ) 200 500
47 12.5 20 600 0.15 5000 0.6 5.0 5.0 EEUEB2D470( ) 200 500
68 12.5 25 750 0.15 5000 0.6 5.0 5.0 EEUEB2D680( ) 200 500
16 20 750 0.15 5000 0.8 7.5 7.5 EEUEB2D680S( ) 100 250
100 16 25 1060 0.15 5000 0.8 7.5 7.5 EEUEB2D101( ) 100 250
18 20 1060 0.15 5000 0.8 7.5 7.5 EEUEB2D101S( ) 100 250
150 16 31.5 1280 0.15 5000 0.8 7.5 – EEUEB2D151 100 –
18 25 1280 0.15 5000 0.8 7.5 7.5 EEUEB2D151S( ) 100 250
220 18 31.5 1690 0.15 5000 0.8 7.5 – EEUEB2D221 50 –
250
22 12.5 20 560 0.15 5000 0.6 5.0 5.0 EEUEB2E220( ) 200 500
33 12.5 20 560 0.15 5000 0.6 5.0 5.0 EEUEB2E330( ) 200 500
47 12.5 25 710 0.15 5000 0.6 5.0 5.0 EEUEB2E470( ) 200 500
16 20 710 0.15 5000 0.8 7.5 7.5 EEUEB2E470S( ) 100 250
68 16 25 990 0.15 5000 0.8 7.5 7.5 EEUEB2E680( ) 100 250
18 20 990 0.15 5000 0.8 7.5 7.5 EEUEB2E680S( ) 100 250
100 16 31.5 1200 0.15 5000 0.8 7.5 – EEUEB2E101 100 –
18 25 1200 0.15 5000 0.8 7.5 7.5 EEUEB2E101S( ) 100 250
150 18 31.5 1470 0.15 5000 0.8 7.5 – EEUEB2E151 50 –
350
10 10 20 270 0.20 5000 0.6 5.0 5.0 EEUEB2V100( ) 200 500
22 12.5 20 350 0.20 5000 0.6 5.0 5.0 EEUEB2V220( ) 200 500
33 16 20 480 0.20 5000 0.8 7.5 7.5 EEUEB2V330S( ) 100 250
47 16 25 640 0.20 5000 0.8 7.5 7.5 EEUEB2V470( ) 100 250
18 20 640 0.20 5000 0.8 7.5 7.5 EEUEB2V470S( ) 100 250
68 16 31.5 780 0.20 5000 0.8 7.5 – EEUEB2V680 100 –
18 25 780 0.20 5000 0.8 7.5 7.5 EEUEB2V680S( ) 100 250
100 18 31.5 970 0.20 5000 0.8 7.5 – EEUEB2V101 50 –
400
10 10 20 250 0.24 5000 0.6 5.0 5.0 EEUEB2G100( ) 200 500
22 12.5 25 410 0.24 5000 0.6 5.0 5.0 EEUEB2G220( ) 200 500
16 20 410 0.24 5000 0.8 7.5 7.5 EEUEB2G220S( ) 100 250
33 16 25 600 0.24 5000 0.8 7.5 7.5 EEUEB2G330( ) 100 250
18 20 600 0.24 5000 0.8 7.5 7.5 EEUEB2G330S( ) 100 250
47 16 31.5 730 0.24 5000 0.8 7.5 – EEUEB2G470 100 –
18 25 730 0.24 5000 0.8 7.5 7.5 EEUEB2G470S( ) 100 250
450
10 12.5 20 310 0.24 5000 0.6 5.0 5.0 EEUEB2W100( ) 200 500
22 16 25 560 0.24 5000 0.8 7.5 7.5 EEUEB2W220( ) 100 250
18 20 560 0.24 5000 0.8 7.5 7.5 EEUEB2W220S( ) 100 250
33 16 31.5 680 0.24 5000 0.8 7.5 – EEUEB2W330( ) 100 –
18 25 680 0.24 5000 0.8 7.5 7.5 EEUEB2W330S( ) 100 250
47 18 31.5 850 0.24 5000 0.8 7.5 – EEUEB2W470 50 –
■ Standard Prod ucts
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C 5000 h
03 Jun. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EE
– EEE-90 –
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L±2.0
Pressure relief +
–
fd±0.05
Radial Lead Type
Series: EE Type: A
■ Di men sions in mm (not to scale)
■ Frequency correction factor for ripple current
Body Dia. 0D10 12.5 16 18
Lead Dia. 0d 0.6 0.6 0.8 0.8
Lead space F 5.0 5.0 7.5 7.5
■ Features
● High ripple current (at high frequency):
40 % higher than ED Series
● Endurance: 105 °C 8000 h to 10000 h
● RoHS directive compliant
■ Speci cations
Category Temp. Range –25 °C to + 105 °C
Rated W.V. Range 160 V .DC to 450 V .DC
Nominal Cap. Range 10 μF to 330 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.06 CV +10 (μA) After 2 minutes
tan dW.V. 160 200 250 350 400 450 (120 Hz/+20 °C)
tan d0.15 0.15 0.15 0.20 0.24 0.24
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied
(The sum of DC and ripple peak voltage shall not exceed the rated working voltage),
when the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
010 : 8000 hours
012.5 to 018 : 10000 hours
Capacitance change ±20 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W. V.
(V. DC)
Cap.
(μF)
Frequency (Hz)
60 <120 <300 <1 k <10 k <100 k <
160 to 450 10 to 82 0.25 0.35 0.50 0.65 0.90 1.00
100 to 330 0.30 0.40 0.55 0.70 0.90 1.00
(Unit : mm)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EE
– EEE-91 –
■ Case size/Ripple current
Cap.
(μF)
160 V 200 V
Case size
(0D×L)
Ripple current
(mA r.m.s.) 105 °C
Case size
(0D×L)
Ripple current
(mA r.m.s.) 105 °C
120 Hz 100 kHz 120 Hz 100 kHz
22 10 × 20 245 700 10 × 20 300 850
33 10 × 20 280 810 10 × 20 320 920
47 10 × 20 370 1065 12.5 × 20 385 1100
68 12.5 × 20 470 1350 12.5 × 25
16 × 20S
465
465
1330
1330
82 12.5 × 25 520 1480 16 × 20S 510 1460
100 12.5 × 25
16 × 20S
660
680
1660
1700
16 × 25
18 × 20S
690
670
1730
1665
150 16 × 25
18 × 20S
755
730
1890
1820 16 × 25 740 1860
220 16 × 31.5
18 × 25S
910
780
2280
1950 18 × 31.5 1175 2600
330 18 × 31.5 1040 2600 18 × 40 1250 3120
Cap.
(μF)
250 V 350 V
Case size
(0D×L)
Ripple current
(mA r.m.s.) 105 °C
Case size
(0D×L)
Ripple current
(mA r.m.s.) 105 °C
120 Hz 100 kHz 120 Hz 100 kHz
15 10 × 20 170 480
22 10 × 20 275 785 12.5 × 20 230 660
33 12.5 × 20 350 995 12.5 × 25
16 × 20S
275
315
790
900
47 12.5 × 25
16 × 20S
450
490
1290
1400
16 × 25
18 × 20S
375
375
1070
1070
68 16 × 20S 490 1400 16 × 31.5
18 × 25S
535
465
1530
1330
82 16 × 25
18 × 20S
590
590
1680
1680 18 × 25S 535 1530
100 16 × 31.5
18 × 25S
840
840
2100
2100 18 × 31.5 640 1600
150 18 × 31.5 1010 2520
220 18 × 40 1175 2940
Cap.
(μF)
400 V 450 V
Case size
(0D×L)
Ripple current
(mA r.m.s.) 105 °C
Case size
(0D×L)
Ripple current
(mA r.m.s.) 105 °C
120 Hz 100 kHz 120 Hz 100 kHz
10 10 × 20 150 430 10 × 20U
12.5 × 20
115
170
330
490
15 12.5 × 20 205 590 12.5 × 25 270 780
22 12.5 × 25
16 × 20S
265
300
760
860 16 × 20S 330 945
33 16 × 20S 355 1020 16 × 25
18 × 20S
350
350
1000
1000
47 16 × 25
18 × 20S
410
410
118 0
118 0
16 × 31.5
18 × 25S
420
420
1200
1200
56 18 × 31.5 480 1380
68 18 × 25 515 1470 18 × 40 630 1800
82 18 × 31.5 575 1645
100 18 × 40 825 2060
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EE
– EEE-92 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C
)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (pcs) (pcs)
160
22 10 20 700 0.15 8000 0.6 5.0 5.0 EEUEE2C220( ) 200 500
33 10 20 810 0.15 8000 0.6 5.0 5.0 EEUEE2C330( ) 200 500
47 10 20 1065 0.15 8000 0.6 5.0 5.0 EEUEE2C470( ) 200 500
68 12.5 20 1350 0.15 10000 0.6 5.0 5.0 EEUEE2C680( ) 200 500
82 12.5 25 1480 0.15 10000 0.6 5.0 5.0 EEUEE2C820( ) 200 500
100 12.5 25 1660 0.15 10000 0.6 5.0 5.0 EEUEE2C101( ) 200 500
16 20 1700 0.15 10000 0.8 7.5 7.5 EEUEE2C101S( ) 100 250
150 16 25 1890 0.15 10000 0.8 7.5 7.5 EEUEE2C151( ) 100 250
18 20 1820 0.15 10000 0.8 7.5 7.5 EEUEE2C151S( ) 100 250
220 16 31.5 2280 0.15 10000 0.8 7.5 EEUEE2C221 100
18 25 1950 0.15 10000 0.8 7.5 7.5 EEUEE2C221S( ) 100 250
330 18 31.5 2600 0.15 10000 0.8 7.5 EEUEE2C331 50
200
22 10 20 850 0.15 8000 0.6 5.0 5.0 EEUEE2D220( ) 200 500
33 10 20 920 0.15 8000 0.6 5.0 5.0 EEUEE2D330( ) 200 500
47 12.5 20 1100 0.15 10000 0.6 5.0 5.0 EEUEE2D470( ) 200 500
68 12.5 25 1330 0.15 10000 0.6 5.0 5.0 EEUEE2D680( ) 200 500
16 20 1330 0.15 10000 0.8 7.5 7.5 EEUEE2D680S( ) 100 250
82 16 20 1460 0.15 10000 0.8 7.5 7.5 EEUEE2D820S( ) 100 250
100 16 25 1730 0.15 10000 0.8 7.5 7.5 EEUEE2D101( ) 100 250
18 20 1665 0.15 10000 0.8 7.5 7.5 EEUEE2D101S( ) 100 250
150 16 25 1860 0.15 10000 0.8 7.5 7.5 EEUEE2D151( ) 100 250
220 18 31.5 2600 0.15 10000 0.8 7.5 EEUEE2D221 50
330 18 40 3120 0.15 10000 0.8 7.5 EEUEE2D331 50
250
22 10 20 785 0.15 8000 0.6 5.0 5.0 EEUEE2E220( ) 200 500
33 12.5 20 995 0.15 10000 0.6 5.0 5.0 EEUEE2E330( ) 200 500
47 12.5 25 1290 0.15 10000 0.6 5.0 5.0 EEUEE2E470( ) 200 500
16 20 1400 0.15 10000 0.8 7.5 7.5 EEUEE2E470S( ) 100 250
68 16 20 1400 0.15 10000 0.8 7.5 7.5 EEUEE2E680S( ) 100 250
82 16 25 1680 0.15 10000 0.8 7.5 7.5 EEUEE2E820( ) 100 250
18 20 1680 0.15 10000 0.8 7.5 7.5 EEUEE2E820S( ) 100 250
100 16 31.5 2100 0.15 10000 0.8 7.5 EEUEE2E101 100
18 25 2100 0.15 10000 0.8 7.5 7.5 EEUEE2E101S( ) 100 250
150 18 31.5 2520 0.15 10000 0.8 7.5 EEUEE2E151 50
220 18 40 2940 0.15 10000 0.8 7.5 EEUEE2E221 50
350
15 10 20 480 0.20 8000 0.6 5.0 5.0 EEUEE2V150( ) 200 500
22 12.5 20 660 0.20 10000 0.6 5.0 5.0 EEUEE2V220( ) 200 500
33 12.5 25 790 0.20 10000 0.6 5.0 5.0 EEUEE2V330( ) 200 500
16 20 900 0.20 10000 0.8 7.5 7.5 EEUEE2V330S( ) 100 250
47 16 25 1070 0.20 10000 0.8 7.5 7.5 EEUEE2V470( ) 100 250
18 20 1070 0.20 10000 0.8 7.5 7.5 EEUEE2V470S( ) 100 250
68 16 31.5 1530 0.20 10000 0.8 7.5 EEUEE2V680 100
18 25 1330 0.20 10000 0.8 7.5 7.5 EEUEE2V680S( ) 100 250
82 18 25 1530 0.20 10000 0.8 7.5 7.5 EEUEE2V820S( ) 100 250
100 18 31.5 1600 0.20 10000 0.8 7.5 EEUEE2V101 50
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C 010=8000 h, 012.5 to 018=10000 h
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EE
– EEE-93 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+10 5 °C
)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (pcs) (pcs)
400
10 10 20 430 0.24 8000 0.6 5.0 5.0 EEUEE2G100( ) 200 500
15 12.5 20 590 0.24 10000 0.6 5.0 5.0 EEUEE2G150( ) 200 500
22 12.5 25 760 0.24 10000 0.6 5.0 5.0 EEUEE2G220( ) 200 500
16 20 860 0.24 10000 0.8 7.5 7.5 EEUEE2G220S( ) 100 250
33 16 20 1020 0.24 10000 0.8 7.5 7.5 EEUEE2G330S( ) 100 250
47 16 25 1180 0.24 10000 0.8 7.5 7.5 EEUEE2G470( ) 100 250
18 20 1180 0.24 10000 0.8 7.5 7.5 EEUEE2G470S( ) 100 250
68 18 25 1470 0.24 10000 0.8 7.5 7.5 EEUEE2G680( ) 100 250
82 18 31.5 1645 0.24 10000 0.8 7.5 EEUEE2G820 50
100 18 40 2060 0.24 10000 0.8 7.5 EEUEE2G101 50
450
10 10 20 330 0.24 8000 0.6 5.0 5.0 EEUEE2W100U( ) 200 500
12.5 20 490 0.24 10000 0.6 5.0 5.0 EEUEE2W100( ) 200 500
15 12.5 25 780 0.24 10000 0.6 5.0 5.0 EEUEE2W150( ) 200 500
22 16 20 945 0.24 10000 0.8 7.5 7.5 EEUEE2W220S( ) 100 250
33 16 25 1000 0.24 10000 0.8 7.5 7.5 EEUEE2W330( ) 100 250
18 20 1000 0.24 10000 0.8 7.5 7.5 EEUEE2W330S( ) 100 250
47 16 31.5 1200 0.24 10000 0.8 7.5 EEUEE2W470 100
18 25 1200 0.24 10000 0.8 7.5 7.5 EEUEE2W470S( ) 100 250
56 18 31.5 1380 0.24 10000 0.8 7.5 EEUEE2W560 50
68 18 40 1800 0.24 10000 0.8 7.5 EEUEE2W680 50
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 105 °C 010=8000 h, 012.5 to 018=10000 h
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TA
– EEE-94 –
08
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L=
=L16 : L±1.0 (016L15, 018L15 : L±1.5)
L20 : L±2.0
Pressure relief +
–
010
0D±0.5
fd±0.05
Radial Lead Type
Series: TA Type: A
■ Di men sions in mm (not to scale)
Body Dia. 0D81012.51618
Lead Dia. 0d 0.6 0.6 0.6 0.8 0.8
Lead space F 3.5 5.0 5.0 7.5 7.5
■ Features
● Endurance: 125 °C 2000 h
● Heat cycle: 1000 cycle –40 °C to +125 °C
● AEC-Q200 qualifi ed✽
● RoHS directive compliant
■ Speci cations
Category Temp. Range –40 °C to + 125 °C
Rated W.V. Range 10 V .DC to 63 V .DC
Nominal Cap. Range 2.2 μF to 4700 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan d
W.V.(V) 10 16 25 35 50 63 (120Hz / +20 °C)
tan d0.20 0.16 0.14 0.12 0.10 0.09
For capacitance value > 1000 μF , add 0.02 per every 1000 μF.
Endurance
After following life test with DC voltage and +125 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours,
when the capacitors are restored to 20 °C, the capacitors, shall meet the limits specifi ed below.
Capacitance change ±30% of initial measured value
tan d< 300 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.
(V.DC) Cap. (μF) Frequency (Hz)
60 120 1 k 10 k 100 k
10 to 63
1 to 330 0.55 0.65 0.85 0.90 1.00
470 to 1000 0.70 0.75 0.90 0.95 1.00
2200 to 4700 0.75 0.80 0.90 0.95 1.00
■ Frequency correction factor for ripple current
(Unit : mm)
✽ This product qualify for AEC-Q200, but it has some deviations.
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TA
– EEE-95 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+125 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads Taping
Straight Taping
✽B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (mm) (mm) (mm) (pcs) (pcs)
10
330 8 11.5 500 0.130 0.6 3.5 5.0 EEUTA1A331( ) 200 1000
470 10 12.5 680 0.100 0.6 5.0 5.0 EEUTA1A471( ) 200 500
1000 10 20 1100 0.057 0.6 5.0 5.0 EEUTA1A102( ) 200 500
12.5 15 1085 0.070 0.6 5.0 5.0 EEUTA1A102S( ) 200 500
2200
12.5 25 1750 0.033 0.6 5.0 5.0 EEUTA1A222L( ) 200 500
16 20 1985 0.032 0.8 7.5 7.5 EEUTA1A222( ) 100 250
18 15 1800 0.042 0.8 7.5 7.5 EEUTA1A222S( ) 100 250
3300 16 25 2300 0.024 0.8 7.5 7.5 EEUTA1A332( ) 100 250
18 20 2250 0.031 0.8 7.5 7.5 EEUTA1A332S( ) 100 250
4700 16 31.5 2710 0.020 0.8 7.5 EEUTA1A472 100
18 25 2470 0.022 0.8 7.5 7.5 EEUTA1A472S( ) 100 250
16
220 8 11.5 500 0.130 0.6 3.5 5.0 EEUTA1C221( ) 200 1000
330 10 12.5 680 0.100 0.6 5.0 5.0 EEUTA1C331( ) 200 500
470 10 16 945 0.075 0.6 5.0 5.0 EEUTA1C471( ) 200 500
1000 12.5 20 1490 0.042 0.6 5.0 5.0 EEUTA1C102( ) 200 500
16 15 1520 0.047 0.8 7.5 7.5 EEUTA1C102S( ) 100 250
2200 16 25 2300 0.024 0.8 7.5 7.5 EEUTA1C222( ) 100 250
18 20 2250 0.031 0.8 7.5 7.5 EEUTA1C222S( ) 100 250
3300 16 31.5 2710 0.020 0.8 7.5 EEUTA1C332 100
18 25 2470 0.022 0.8 7.5 7.5 EEUTA1C332S( ) 100 250
4700 18 31.5 3270 0.018 0.8 7.5 EEUTA1C472 50
25
100 8 11.5 500 0.130 0.6 3.5 5.0 EEUTA1E101( ) 200 1000
220 10 12.5 680 0.100 0.6 5.0 5.0 EEUTA1E221( ) 200 500
330 10 16 945 0.075 0.6 5.0 5.0 EEUTA1E331( ) 200 500
470 10 20 1100 0.057 0.6 5.0 5.0 EEUTA1E471( ) 200 500
12.5 15 1085 0.070 0.6 5.0 5.0 EEUTA1E471S( ) 200 500
1000
12.5 25 1750 0.033 0.6 5.0 5.0 EEUTA1E102L( ) 200 500
16 20 1985 0.032 0.8 7.5 7.5 EEUTA1E102( ) 100 250
18 15 1800 0.042 0.8 7.5 7.5 EEUTA1E102S( ) 100 250
2200 16 31.5 2710 0.020 0.8 7.5 EEUTA1E222 100
18 25 2470 0.022 0.8 7.5 7.5 EEUTA1E222S( ) 100 250
3300 18 35.5 3310 0.017 0.8 7.5 EEUTA1E332 50
35
100 10 12.5 555 0.180 0.6 5.0 5.0 EEUTA1V101( ) 200 500
220 10 16 765 0.130 0.6 5.0 5.0 EEUTA1V221( ) 200 500
330 10 20 930 0.100 0.6 5.0 5.0 EEUTA1V331( ) 200 500
470 12.5 20 1330 0.070 0.6 5.0 5.0 EEUTA1V471( ) 200 500
16 15 1450 0.088 0.8 7.5 7.5 EEUTA1V471S( ) 100 250
1000 16 25 2010 0.037 0.8 7.5 7.5 EEUTA1V102( ) 100 250
18 20 2180 0.046 0.8 7.5 7.5 EEUTA1V102S( ) 100 250
2200 18 35.5 2790 0.025 0.8 7.5 EEUTA1V222 50
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 125 °C 2000 h
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TA
– EEE-96 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(100 kHz)
(+125 °C)
Imped-
ance
(100 kHz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads Taping
Straight Taping
✽B
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (mm) (mm) (mm) (pcs) (pcs)
50
1 8 11.5 352.00 0.6 3.5 5.0EEUTA1H1R0( )✽✽✽ 200 1000
10 8 11.5 180 0.950 0.6 3.5 5.0 EEUTA1H100( ) 200 1000
22 8 11.5 250 0.650 0.6 3.5 5.0 EEUTA1H220( ) 200 1000
33 8 11.5 300 0.450 0.6 3.5 5.0 EEUTA1H330( ) 200 1000
47 8 11.5 440 0.350 0.6 3.5 5.0 EEUTA1H470S( ) 200 1000
100 10 12.5 555 0.180 0.6 5.0 5.0 EEUTA1H101( ) 200 500
220 10 20 930 0.100 0.6 5.0 5.0 EEUTA1H221( ) 200 500
330 12.5 20 1330 0.070 0.6 5.0 5.0 EEUTA1H331( ) 200 500
16 15 1450 0.088 0.8 7.5 7.5 EEUTA1H331S( ) 100 250
470
12.5 25 1650 0.055 0.6 5.0 5.0 EEUTA1H471L( ) 200 500
16 20 1650 0.053 0.8 7.5 7.5 EEUTA1H471( ) 100 250
18 15 1710 0.075 0.8 7.5 7.5 EEUTA1H471S( ) 100 250
1000 16 31.5 2430 0.031 0.8 7.5 EEUTA1H102 100
18 25 2350 0.032 0.8 7.5 7.5 EEUTA1H102S( ) 100 250
63
22 8 11.5 310 0.470 0.6 3.5 5.0 EEUTA1J220( ) 200 1000
33 10 12.5 410 0.360 0.6 5.0 5.0 EEUTA1J330( ) 200 500
47 10 16 460 0.270 0.6 5.0 5.0 EEUTA1J470( ) 200 500
100 10 20 680 0.205 0.6 5.0 5.0 EEUTA1J101( ) 200 500
220
12.5 25 1325 0.100 0.6 5.0 5.0 EEUTA1J221L( ) 200 500
16 20 1360 0.085 0.8 7.5 7.5 EEUTA1J221( ) 100 250
18 15 1300 0.120 0.8 7.5 7.5 EEUTA1J221S( ) 100 250
330 16 25 1660 0.070 0.8 7.5 7.5 EEUTA1J331( ) 100 250
18 20 1760 0.077 0.8 7.5 7.5 EEUTA1J331S( ) 100 250
470 16 31.5 2055 0.060 0.8 7.5 EEUTA1J471 100
18 25 1990 0.060 0.8 7.5 7.5 EEUTA1J471S( ) 100 250
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
Endurance : 125 °C 2000 h
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TP
– EEE-97 –
08
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L=
=L16 : L±1.5
L20 : L±2.0
Pressure relief +
–
010
0D±0.5
fd±0.05
Radial Lead Type
Series: TP Type: A
■ Di men sions in mm (not to scale)
Body Dia. 0D81012.51618
Lead Dia. 0d 0.6 0.6 0.6 0.8 0.8
Lead space F 3.5 5.0 5.0 7.5 7.5
■ Features
● Endurance: 125 °C 2000 h to 5000 h or 135 °C 1000 h to 2000 h
● Smaller than series TA
● High ripple current (at high frequency) : 20 to 40% higher than TA series
● AEC-Q200 qualifi ed✽
● RoHS directive compliant
■ Speci cations
Category Temp. Range –40 °C to + 135 °C
Rated W.V. Range 25 V .DC to 35 V .DC
Nominal Cap. Range 100 μF to 5100 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV After 2 minutes
tan d
W.V.(V) 25 35 (120Hz / +20 °C)
tan d0.14 0.12
For capacitance value > 1000 μF , add 0.02 per every 1000 μF.
Endurance 1
After following life test with DC voltage and +125 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
08 : 2000 hours, 010 : 3000 hours, 012.5 : 4000 hours, 016 to 018 : 5000 hours
Capacitance change ±30% of initial measured value
tan d< 300 % of initial specifi ed value
DC leakage current < initial specifi ed value
Endurance 2
After following life test with DC voltage and +135 °C±2 °C ripple current value applied. (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration
08 : 1000 hours, 010 to 018 : 2000 hours
Capacitance change ±30% of initial measured value
tan d< 300 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life 1 After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Shelf Life 2 After storage for 1000 hours at +135 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
W.V.
(V.DC) Cap. (μF) Frequency (Hz)
60 120 1 k 10 k 100 k
25 to 35
to 330 0.55 0.65 0.85 0.90 1.00
390 to 1000 0.70 0.75 0.90 0.95 1.00
1200 to 0.75 0.80 0.90 0.95 1.00
■ Frequency correction factor for ripple current
(Unit : mm)
✽ This product qualify for AEC-Q200, but it has some deviations.
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ TP
– EEE-98 –
■ Standard Prod ucts
· When requesting taped product, please put the letter "B" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm.
· Please refer to the page of “Taping Dimensions”.
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia.
Length
Ripple
Current
(100 kHz)
(+125 °C)
Ripple
Current
(100 kHz)
(+135 °C)
E.S.R
(100 kHz)
(+20 °C)
tan d
(120 kHz)
(+20 °C)
125 °C
Enduance
135 °C
Enduance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight Taping
✽B
(V) (μF) (mm) (mm)
(mA r.m.s.) (mA r.m.s.)
(Ω)
(hours) (hours)
(mm) (mm) (mm) (pcs) (pcs)
25
220 10 12.5 580 500 0.190 0.14
3000 2000
0.6 5.0 5.0
EEUTP1E221( )
200 500
330 10 16 1100 945 0.130 0.14
3000 2000
0.6 5.0 5.0
EEUTP1E331( )
200 500
470 8 20 1060 760 0.067 0.14
2000 1000
0.6 3.5 5.0
EEUTP1E471L( )
200 1000
10 16 1100 945 0.130 0.14
3000 2000
0.6 5.0 5.0
EEUTP1E471( )
200 500
510 10 16 110 0 945 0.130 0.14
3000 2000
0.6 5.0 5.0
EEUTP1E511( )✽
200 500
820 10 20 1540 1100 0.052 0.14
3000 2000
0.6 5.0 5.0
EEUTP1E821( )
200 500
1000 12.5 20 1860 1490 0.038 0.14
4000 2000
0.6 5.0 5.0
EEUTP1E102( )
200 500
1200 12.5 20 1860 1490 0.038 0.14
4000 2000
0.6 5.0 5.0
EEUTP1E122( )
200 500
1800 12.5 25 2180 1750 0.030 0.14
4000 2000
0.6 5.0 5.0
EEUTP1E182( )
200 500
16 20 2380 1985 0.029 0.14
5000 2000
0.8 7.5 7.5
EEUTP1E182S( )
100 250
2000 16 20 2380 1985 0.029 0.16
5000 2000
0.8 7.5 7.5
EEUTP1E202S( )✽
100 250
2200 16 25 2760 2300 0.022 0.16
5000 2000
0.8 7.5 7.5
EEUTP1E222( )
100 250
18 20 2700 2250 0.028 0.16
5000 2000
0.8 7.5 7.5
EEUTP1E222S( )
100 250
2700 16 25 2760 2300 0.022 0.16
5000 2000
0.8 7.5 7.5
EEUTP1E272( )
100 250
18 20 2700 2250 0.028 0.16
5000 2000
0.8 7.5 7.5
EEUTP1E272S( )
100 250
3300 16 31.5 3250 2710 0.018 0.18
5000 2000
0.8 7.5
EEUTP1E332
100
18 25 2960 2470 0.020 0.18
5000 2000
0.8 7.5 7.5
EEUTP1E332S( )
100 250
3900 16 31.5 3250 2710 0.018 0.18
5000 2000
0.8 7.5
EEUTP1E392
100
18 25 2960 2470 0.020 0.18
5000 2000
0.8 7.5 7.5
EEUTP1E392S( )
100 250
4700 18 31.5 3480 2900 0.016 0.20
5000 2000
0.8 7.5
EEUTP1E472
50
5100 18 31.5 3480 2900 0.016 0.22
5000 2000
0.8 7.5
EEUTP1E512✽
50
35
100 10 12.5 580 500 0.190 0.12
3000 2000
0.6 5.0 5.0
EEUTP1V101( )
200 500
120 10 12.5 580 500 0.190 0.12
3000 2000
0.6 5.0 5.0
EEUTP1V121( )
200 500
220 8 20 1060 760 0.067 0.12
2000 1000
0.6 3.5 5.0
EEUTP1V221L( )
200 1000
10 16 1100 945 0.130 0.12
3000 2000
0.6 5.0 5.0
EEUTP1V221( )
200 500
270 8 20 1060 760 0.067 0.12
2000 1000
0.6 3.5 5.0
EEUTP1V271L( )
200 1000
10 16 1100 945 0.130 0.12
3000 2000
0.6 5.0 5.0
EEUTP1V271( )
200 500
330 10 20 1540 1100 0.052 0.12
3000 2000
0.6 5.0 5.0
EEUTP1V331( )
200 500
390 10 20 1540 1100 0.052 0.12
3000 2000
0.6 5.0 5.0
EEUTP1V391( )
200 500
470 12.5 20 1860 1490 0.038 0.12
4000 2000
0.6 5.0 5.0
EEUTP1V471( )
200 500
560 12.5 20 1860 1490 0.038 0.12
4000 2000
0.6 5.0 5.0
EEUTP1V561( )
200 500
620 12.5 20 1860 1490 0.038 0.12
4000 2000
0.6 5.0 5.0
EEUTP1V621( )✽
200 500
820 12.5 25 2180 1750 0.030 0.12
4000 2000
0.6 5.0 5.0
EEUTP1V821( )
200 500
1000 16 20 2380 1985 0.029 0.12
5000 2000
0.8 7.5 7.5
EEUTP1V102( )
100 250
1200 16 20 2380 1985 0.029 0.12
5000 2000
0.8 7.5 7.5
EEUTP1V122( )
100 250
1500 16 25 2760 2300 0.022 0.12
5000 2000
0.8 7.5 7.5
EEUTP1V152( )
100 250
18 20 2700 2250 0.028 0.12
5000 2000
0.8 7.5 7.5
EEUTP1V152S( )
100 250
1600 16 25 2760 2300 0.022 0.12
5000 2000
0.8 7.5 7.5
EEUTP1V162( )✽
100 250
1800 16 31.5 3250 2710 0.018 0.12
5000 2000
0.8 7.5
EEUTP1V182
100
18 25 2960 2470 0.020 0.12
5000 2000
0.8 7.5 7.5
EEUTP1V182S( )
100 250
2000 16 31.5 3250 2710 0.018 0.14
5000 2000
0.8 7.5
EEUTP1V202✽
100
18 25 2960 2470 0.020 0.14
5000 2000
0.8 7.5 7.5
EEUTP1V202S( )✽
100 250
2200 18 31.5 3480 2900 0.016 0.14
5000 2000
0.8 7.5
EEUTP1V222
50
2700 18 31.5 3480 2900 0.016 0.14
5000 2000
0.8 7.5
EEUTP1V272
50
✽ :
Substandard
(
E24series numbers
)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ NHG
– EEE-99 –
08
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L=
=L16 : L±1.0
L20 : L±2.0
Pressure relief
06.3+
–
010
0D±0.5
fd±0.05
■ Features
● Endurance : 105 °C 1000 h to 2000 h
● RoHS directive compliant
Radial Lead Type
Series: NHG Type: A
■ Speci cations
Category Temp. Range –55 °C to +105 °C –25 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC
Nominal Cap. Range 2.2 μF to 22000 μF 1 μF to 330 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes
(Which is greater) I < 0.06 CV +10 (μA) After 2 minutes
tan dPlease see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration : 6.3 V.DC to 100 V.DC : (05 to 08)=1000 hours, (010 to 018)=2000 hours
160 V.DC to 450 V.DC : 2000 hours
Capacitance change ±20 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■ Di men sions in mm (not to scale)
W.V.(V.DC) Cap. (μF) Frequency (Hz)
60 120 1 k 10 k 100 k
6.3 to 100
2.2 to 33 0.75 1.00 1.55 1.80 2.00
47 to 470 0.80 1.00 1.35 1.50 1.50
1000 to 22000 0.85 1.00 1.10 1.15 1.15
160 to 450 1 to 330 0.80 1.00 1.35 1.50 1.50
■ Frequency correction factor for ripple current
Body Dia. 0D5 6.3 8 1012.516 18
Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
(Unit : mm)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ NHG
– EEE-100 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+10 5 °C)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
6.3
220 5 11 140 0.28 1000 0.5 2.0 5.0 2.5 ECA0JHG221( ) 200 2000
470 6.3 11.2 230 0.28 1000 0.5 2.5 5.0 2.5 ECA0JHG471( ) 200 2000
1000 8 11.5 380 0.28 1000 0.6 3.5 5.0 ECA0JHG102( ) 200 1000
2200 10 16 710 0.30 2000 0.6 5.0 5.0 ECA0JHG222( ) 200 500
3300 10 20 840 0.32 2000 0.6 5.0 5.0 ECA0JHG332( ) 200 500
4700 12.5 20 1090 0.34 2000 0.6 5.0 5.0 ECA0JHG472( ) 200 500
6800 12.5 25 1350 0.38 2000 0.6 5.0 5.0 ECA0JHG682( ) 200 500
10000 16 25 1650 0.46 2000 0.8 7.5 7.5 ECA0JHG103( ) 100 250
15000 16 31.5 2010 0.56 2000 0.8 7.5 ECA0JHG153 100
22000 18 35.5 2350 0.70 2000 0.8 7.5 ECA0JHG223 50
10
330 6.3 11.2 200 0.24 1000 0.5 2.5 5.0 2.5 ECA1AHG331( ) 200 2000
470 8 11.5 250 0.24 1000 0.6 3.5 5.0 ECA1AHG471( ) 200 1000
1000 10 12.5 460 0.24 2000 0.6 5.0 5.0 ECA1AHG102( ) 200 500
2200 10 20 760 0.26 2000 0.6 5.0 5.0 ECA1AHG222( ) 200 500
3300 12.5 20 1000 0.28 2000 0.6 5.0 5.0 ECA1AHG332( ) 200 500
4700 12.5 25 1260 0.30 2000 0.6 5.0 5.0 ECA1AHG472( ) 200 500
6800 16 25 1570 0.34 2000 0.8 7.5 7.5 ECA1AHG682( ) 100 250
10000 16 31.5 1890 0.42 2000 0.8 7.5 ECA1AHG103 100
15000 18 35.5 2180 0.52 2000 0.8 7.5 ECA1AHG153 50
16
10 0 5 11 110 0. 2 0 10 0 0 0 .5 2. 0 5.0 2 .5 ECA1CHG101( ) 200 2000
220 6.3 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 ECA1CHG221( ) 200 2000
330 8 11.5 260 0.20 1000 0.6 3.5 5.0 ECA1CHG331( ) 200 1000
470 8 11.5 310 0.20 1000 0.6 3.5 5.0 ECA1CHG471( ) 200 1000
1000 10 16 560 0.20 2000 0.6 5.0 5.0 ECA1CHG102( ) 200 500
2200 12.5 20 920 0.22 2000 0.6 5.0 5.0 ECA1CHG222( ) 200 500
3300 12.5 25 1170 0.24 2000 0.6 5.0 5.0 ECA1CHG332( ) 200 500
4700 16 25 1480 0.26 2000 0.8 7.5 7.5 ECA1CHG472( ) 100 250
6800 16 31.5 1780 0.30 2000 0.8 7.5 ECA1CHG682 100
10000 18 35.5 2060 0.38 2000 0.8 7.5 ECA1CHG103 50
25
47 5 11 91 0.16 1000 0.5 2.0 5.0 2.5 ECA1EHG470( ) 200 2000
100 6.3 11.2 130 0.16 1000 0.5 2.5 5.0 2.5 ECA1EHG101( ) 200 2000
220 8 11.5 230 0.16 1000 0.6 3.5 5.0 ECA1EHG221( ) 200 1000
330 8 11.5 310 0.16 1000 0.6 3.5 5.0 ECA1EHG331( ) 200 1000
470 10 12.5 380 0.16 2000 0.6 5.0 5.0 ECA1EHG471( ) 200 500
1000 10 20 680 0.16 2000 0.6 5.0 5.0 ECA1EHG102( ) 200 500
2200 12.5 25 1090 0.18 2000 0.6 5.0 5.0 ECA1EHG222( ) 200 500
3300 16 25 1400 0.20 2000 0.8 7.5 7.5 ECA1EHG332( ) 100 250
4700 16 31.5 1750 0.22 2000 0.8 7.5 ECA1EHG472 100
6800 18 35.5 2040 0.26 2000 0.8 7.5 ECA1EHG682 50
35
47 5 11 90 0.14 1000 0.5 2.0 5.0 2.5 ECA1VHG470( ) 200 2000
100 6.3 11.2 150 0.14 1000 0.5 2.5 5.0 2.5 ECA1VHG101( ) 200 2000
220 8 11.5 270 0.14 1000 0.6 3.5 5.0 ECA1VHG221( ) 200 1000
330 10 12.5 350 0.14 2000 0.6 5.0 5.0 ECA1VHG331( ) 200 500
470 10 16 460 0.14 2000 0.6 5.0 5.0 ECA1VHG471( ) 200 500
1000 12.5 20 810 0.14 2000 0.6 5.0 5.0 ECA1VHG102( ) 200 500
2200 16 25 1260 0.16 2000 0.8 7.5 7.5 ECA1VHG222( ) 100 250
3300 16 31.5 1610 0.18 2000 0.8 7.5 ECA1VHG332 100
4700 18 35.5 1910 0.20 2000 0.8 7.5 ECA1VHG472 50
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ NHG
– EEE-101 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+10 5 °C)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
50
0.1 5 11 1.1 0.12 1000 0.5 2.0 5.0 2.5
ECA1HHG0R1( )✽✽✽
200 2000
0.22 5 11 2.3 0.12 1000 0.5 2.0 5.0 2.5
ECA1HHGR22( )✽✽✽
200 2000
0.33 5 11 3.5 0.12 1000 0.5 2.0 5.0 2.5
ECA1HHGR33( )✽✽✽
200 2000
0.47 5 11 5 0.12 1000 0.5 2.0 5.0 2.5
ECA1HHGR47( )✽✽✽
200 2000
1 5 11 10 0.12 1000 0.5 2.0 5.0 2.5
ECA1HHG010( )✽✽✽
200 2000
2.2 5 11 18 0.12 1000 0.5 2.0 5.0 2.5
ECA1HHG2R2( )
200 2000
3.3 5 11 22 0.12 1000 0.5 2.0 5.0 2.5
ECA1HHG3R3( )
200 2000
4.7 5 11 26 0.12 1000 0.5 2.0 5.0 2.5
ECA1HHG4R7( )
200 2000
10 5 11 39 0.12 1000 0.5 2.0 5.0 2.5
ECA1HHG100( )
200 2000
22 5 11 65 0.12 1000 0.5 2.0 5.0 2.5
ECA1HHG220( )
200 2000
33 5 11 90 0.12 1000 0.5 2.0 5.0 2.5
ECA1HHG330( )
200 2000
47 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5
ECA1HHG470( )
200 2000
100 8 11.5 180 0.12 1000 0.6 3.5 5.0
ECA1HHG101( )
200 1000
220 10 12.5 300 0.12 2000 0.6 5.0 5.0
ECA1HHG221( )
200 500
330 10 16 410 0.12 2000 0.6 5.0 5.0
ECA1HHG331( )
200 500
470 10 20 530 0.12 2000 0.6 5.0 5.0
ECA1HHG471( )
200 500
1000 12.5 25 950 0.12 2000 0.6 5.0 5.0
ECA1HHG102( )
200 500
2200 16 31.5 1470 0.14 2000 0.8 7.5
ECA1HHG222
100
3300 18 35.5 1770 0.16 2000 0.8 7.5
ECA1HHG332
50
63
10 5 11 46 0.10 1000 0.5 2.0 5.0 2.5
ECA1JHG100( )
200 2000
22 5 11 71 0.10 1000 0.5 2.0 5.0 2.5
ECA1JHG220( )
200 2000
33 6.3 11.2 100 0.10 1000 0.5 2.5 5.0 2.5
ECA1JHG330( )
200 2000
47 6.3 11.2 120 0.10 1000 0.5 2.5 5.0 2.5
ECA1JHG470( )
200 2000
100 10 12.5 215 0.10 2000 0.6 5.0 5.0
ECA1JHG101( )
200 500
220 10 16 335 0.10 2000 0.6 5.0 5.0
ECA1JHG221( )
200 500
330 10 20 510 0.10 2000 0.6 5.0 5.0
ECA1JHG331( )
200 500
470 12.5 20 640 0.10 2000 0.6 5.0 5.0
ECA1JHG471( )
200 500
1000 16 25 930 0.10 2000 0.8 7.5 7.5
ECA1JHG102( )
100 250
2200 18 35.5 1610 0.12 2000 0.8 7.5
ECA1JHG222
50
100
0.47 5 11 9 0.08 1000 0.5 2.0 5.0 2.5
ECA2AHGR47( )✽✽✽
200 2000
1 5 11 14 0.08 1000 0.5 2.0 5.0 2.5
ECA2AHG010( )✽✽✽
200 2000
2.2 5 11 21 0.08 1000 0.5 2.0 5.0 2.5
ECA2AHG2R2( )
200 2000
3.3 5 11 31 0.08 1000 0.5 2.0 5.0 2.5
ECA2AHG3R3( )
200 2000
4.7 5 11 38 0.08 1000 0.5 2.0 5.0 2.5
ECA2AHG4R7( )
200 2000
10 6.3 11.2 54 0.08 1000 0.5 2.5 5.0 2.5
ECA2AHG100( )
200 2000
22 6.3 11.2 93 0.08 1000 0.5 2.5 5.0 2.5
ECA2AHG220( )
200 2000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ NHG
– EEE-102 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+10 5 °C)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
100
33 8 11.5 130 0.08 1000 0.6 3.5 5.0 ECA2AHG330( ) 200 1000
47 10 12.5 165 0.08 2000 0.6 5.0 5.0 ECA2AHG470( ) 200 500
100 10 20 265 0.08 2000 0.6 5.0 5.0 ECA2AHG101( ) 200 500
220 12.5 25 440 0.08 2000 0.6 5.0 5.0 ECA2AHG221( ) 200 500
330 16 25 540 0.08 2000 0.8 7.5 7.5 ECA2AHG331( ) 100 250
470 16 25 715 0.08 2000 0.8 7.5 7.5 ECA2AHG471( ) 100 250
1000 18 35.5 985 0.08 2000 0.8 7.5 ECA2AHG102 50
160
1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG010( ) 200 2000
2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG2R2( ) 200 2000
3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG3R3( ) 200 2000
4.7 6.3 11.2 43 0.15 2000 0.5 2.5 5.0 2.5 ECA2CHG4R7( ) 200 2000
10 10 12.5 70 0.15 2000 0.6 5.0 5.0 ECA2CHG100( ) 200 500
22 10 20 130 0.15 2000 0.6 5.0 5.0 ECA2CHG220( ) 200 500
33 10 20 180 0.15 2000 0.6 5.0 5.0 ECA2CHG330( ) 200 500
47 12.5 20 220 0.15 2000 0.6 5.0 5.0 ECA2CHG470( ) 200 500
100 16 25 335 0.15 2000 0.8 7.5 7.5 ECA2CHG101( ) 100 250
220 16 31.5 540 0.15 2000 0.8 7.5 ECA2CHG221 100
330 18 31.5 705 0.15 2000 0.8 7.5 ECA2CHG331 50
200
1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 ECA2DHG010( ) 200 2000
2.2 6.3 11.2 25 0.15 2000 0.5 2.5 5.0 2.5 ECA2DHG2R2( ) 200 2000
3.3 6.3 11.2 36 0.15 2000 0.5 2.5 5.0 2.5 ECA2DHG3R3( ) 200 2000
4.7 8 11.5 50 0.15 2000 0.6 3.5 5.0 ECA2DHG4R7( ) 200 1000
10 10 16 80 0.15 2000 0.6 5.0 5.0 ECA2DHG100( ) 200 500
22 10 20 140 0.15 2000 0.6 5.0 5.0 ECA2DHG220( ) 200 500
33 12.5 20 190 0.15 2000 0.6 5.0 5.0 ECA2DHG330( ) 200 500
47 12.5 20 220 0.15 2000 0.6 5.0 5.0 ECA2DHG470( ) 200 500
100 16 25 335 0.15 2000 0.8 7.5 7.5 2.5 ECA2DHG101( ) 100 250
220 18 31.5 575 0.15 2000 0.8 7.5 ECA2DHG221 50
250
1 6.3 11.2 17 0.15 2000 0.5 2.5 5.0 2.5 ECA2EHG010( ) 200 2000
2.2 6.3 11.2 29 0.15 2000 0.5 2.5 5.0 2.5 ECA2EHG2R2( ) 200 2000
3.3 8 11.5 42 0.15 2000 0.6 3.5 5.0 ECA2EHG3R3 200 1000
4.7 8 11.5 50 0.15 2000 0.6 3.5 5.0 ECA2EHG4R7( ) 200 1000
10 10 16 88 0.15 2000 0.6 5.0 5.0 ECA2EHG100( ) 200 500
22 12.5 20 155 0.15 2000 0.6 5.0 5.0 ECA2EHG220( ) 200 500
33 12.5 20 190 0.15 2000 0.6 5.0 5.0 ECA2EHG330( ) 200 500
47 12.5 25 230 0.15 2000 0.6 5.0 5.0 ECA2EHG470( ) 200 500
100 16 31.5 365 0.15 2000 0.8 7.5 ECA2EHG101 100
350
1 6.3 11.2 18 0.20 2000 0.5 2.5 5.0 2.5 ECA2VHG010( ) 200 2000
2.2 8 11.5 31 0.20 2000 0.6 3.5 5.0 ECA2VHG2R2( ) 200 1000
3.3 10 12.5 38 0.20 2000 0.6 5.0 5.0 ECA2VHG3R3( ) 200 500
4.7 10 16 50 0.20 2000 0.6 5.0 5.0 ECA2VHG4R7( ) 200 500
10 10 20 82 0.20 2000 0.6 5.0 5.0 ECA2VHG100( ) 200 500
22 12.5 20 130 0.20 2000 0.6 5.0 5.0 ECA2VHG220( ) 200 500
33 16 25 195 0.20 2000 0.8 7.5 7.5 ECA2VHG330( ) 100 250
47 16 25 230 0.20 2000 0.8 7.5 7.5 ECA2VHG470( ) 100 250
100 18 31.5 375 0.20 2000 0.8 7.5 ECA2VHG101 50
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ NHG
– EEE-103 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+10 5 °C)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
400
1 6.3 11.2 18 0.24 2000 0.5 2.5 5.0 2.5 ECA2GHG010( ) 200 2000
2.2 8 11.5 30 0.24 2000 0.6 3.5 5.0 ECA2GHG2R2( ) 200 1000
3.3 10 12.5 40 0.24 2000 0.6 5.0 5.0 ECA2GHG3R3( ) 200 500
4.7 10 16 50 0.24 2000 0.6 5.0 5.0 ECA2GHG4R7( ) 200 500
10 10 20 80 0.24 2000 0.6 5.0 5.0 ECA2GHG100( ) 200 500
22 12.5 25 145 0.24 2000 0.6 5.0 5.0 ECA2GHG220( ) 200 500
33 16 25 195 0.24 2000 0.8 7.5 7.5 ECA2GHG330( ) 100 250
47 16 31.5 250 0.24 2000 0.8 7.5 ECA2GHG470 100
450
1 8 11.5 18 0.24 2000 0.6 3.5 5.0 ECA2WHG010( ) 200 1000
2.2 10 12.5 29 0.24 2000 0.6 5.0 5.0 ECA2WHG2R2( ) 200 500
3.3 10 16 41 0.24 2000 0.6 5.0 5.0 ECA2WHG3R3( ) 200 500
4.7 10 20 49 0.24 2000 0.6 5.0 5.0 ECA2WHG4R7( ) 200 500
10 12.5 20 75 0.24 2000 0.6 5.0 5.0 ECA2WHG100( ) 200 500
22 16 25 115 0.24 2000 0.8 7.5 7.5 ECA2WHG220( ) 100 250
33 16 31.5 155 0.24 2000 0.8 7.5 ECA2WHG330 100
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HD
– EEE-104 –
08
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L=
= L16 : L±1.5
L20 : L±2.0
Pressure relief
06.3+
–
010
0D±0.5
fd±0.05
■Features
●Endurance : 105 °C 1000 h to 2000 h
●Minaturize, Higher Capacitance :
1 Size Miniturized Product of Current A-NHG
●RoHS directive compliant
Radial Lead Type
Series: HD Type: A
■Speci cations
Category Temp. Range –55 °C to +105 °C
Rated W.V. Range 10 V.DC to 50 V.DC
Nominal Cap. Range 2.2 μF to 22000 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes
(Which is greater)
tan dPlease see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration : 05 to 08=1000 hours, 010 to 018=2000 hours
Capacitance change ±20 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■Di men sions in mm (not to scale)
■Frequency correction factor for ripple current
Body Dia. 0D 5 6.3 8 10 12.5 16 18
Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
W.V.(V.DC) Cap. (μF) Frequency (Hz)
60 120 1 k 10 k 100 k
10 to 50
2.2 to 33 0.75 1.00 1.55 1.80 2.00
47 to 470 0.80 1.00 1.35 1.50 1.50
1000 to 22000 0.85 1.00 1.10 1.15 1.15
(Unit : mm)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HD
– EEE-105 –
■Standard Prod ucts
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+10 5 °C)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours)
(mm) (mm) (mm) (mm) (pcs) (pcs)
10
330 6.3 11.2 200 0.24 1000 0.5 2.5 5.0 2.5 EEUHD1A331( ) 200 2000
470 8 11.5 250 0.24 1000 0.6 3.5 5.0 EEUHD1A471( ) 200 1000
1000 10 12.5 460 0.24 2000 0.6 5.0 5.0 EEUHD1A102( ) 200 500
2200 10 16 760 0.26 2000 0.6 5.0 5.0 EEUHD1A222( ) 200 500
4700 12.5 20 1260 0.30 2000 0.6 5.0 5.0 EEUHD1A472( ) 200 500
6800 12.5 25 1570 0.34 2000 0.6 5.0 5.0 EEUHD1A682( ) 200 500
10000 16 25 1890 0.42 2000 0.8 7.5 7.5 EEUHD1A103( ) 100 250
15000 16 31.5 2180 0.52 2000 0.8 7.5 EEUHD1A153 100
22000 18 35.5 2400 0.66 2000 0.8 7.5 EEUHD1A223 50
16
10 0 5 11 110 0. 2 0 10 0 0 0 .5 5.0 2.5 EEUHD1C101( ) 200 2000
220 6.3 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 EEUHD1C221( ) 200 2000
330 8 11.5 260 0.20 1000 0.6 3.5 5.0 EEUHD1C331( ) 200 1000
470 8 11.5 310 0.20 1000 0.6 3.5 5.0 EEUHD1C471( ) 200 1000
3300 12.5 20 1170 0.24 2000 0.6 5.0 5.0 EEUHD1C332( ) 200 500
4700 12.5 25 1480 0.26 2000 0.6 5.0 5.0 EEUHD1C472( ) 200 500
6800 16 25 1780 0.30 2000 0.8 7.5 7.5 EEUHD1C682( ) 100 250
8200 16 25 1780 0.34 2000 0.8 7.5 7.5 EEUHD1C822( ) 100 250
10000 16 31.5 2060 0.38 2000 0.8 7.5 EEUHD1C103 100
15000 18 35.5 2210 0.48 2000 0.8 7.5 EEUHD1C153 50
25
47 5 11 91 0.16 1000 0.5 5.0 2.5 EEUHD1E470( ) 200 2000
68 5 11 91 0.16 1000 0.5 5.0 2.5 EEUHD1E680( ) 200 2000
100 6.3 11.2 130 0.16 1000 0.5 2.5 5.0 2.5 EEUHD1E101( ) 200 2000
220 8 11.5 230 0.16 1000 0.6 3.5 5.0 EEUHD1E221( ) 200 1000
330 8 11.5 310 0.16 1000 0.6 3.5 5.0 EEUHD1E331( ) 200 1000
470 10 12.5 380 0.16 2000 0.6 5.0 5.0 EEUHD1E471( ) 200 500
1000 10 16 680 0.16 2000 0.6 5.0 5.0 EEUHD1E102( ) 200 500
2200 12.5 20 1090 0.18 2000 0.6 5.0 5.0 EEUHD1E222( ) 200 500
3300 12.5 25 1400 0.20 2000 0.6 5.0 5.0 EEUHD1E332( ) 200 500
4700 16 25 1750 0.22 2000 0.8 7.5 7.5 EEUHD1E472( ) 100 250
5600 16 25 1750 0.24 2000 0.8 7.5 7.5 EEUHD1E562( ) 100 250
6800 16 31.5 2040 0.26 2000 0.8 7.5 EEUHD1E682 100
10000 18 35.5 2200 0.34 2000 0.8 7.5 EEUHD1E103 50
35
47 5 11 90 0.14 1000 0.5 5.0 2.5 EEUHD1V470( ) 200 2000
100 6.3 11.2 150 0.14 1000 0.5 2.5 5.0 2.5 EEUHD1V101( ) 200 2000
220 8 11.5 270 0.14 1000 0.6 3.5 5.0 EEUHD1V221( ) 200 1000
330 10 12.5 350 0.14 2000 0.6 5.0 5.0 EEUHD1V331( ) 200 500
470 10 16 460 0.14 2000 0.6 5.0 5.0 EEUHD1V471( ) 200 500
680 10 16 460 0.14 2000 0.6 5.0 5.0 EEUHD1V681( ) 200 500
2200 12.5 25 1260 0.16 2000 0.6 5.0 5.0 EEUHD1V222( ) 200 500
3300 16 25 1610 0.18 2000 0.8 7.5 7.5 EEUHD1V332( ) 100 250
4700 16 31.5 1910 0.20 2000 0.8 7.5 EEUHD1V472 100
6800 18 35.5 2050 0.24 2000 0.8 7.5 EEUHD1V682 50
Endurance : 105 °C
05 to 08=1000 h, 010 to 018=2000 h
02 May. 2014
2.0
2.0
2.0
2.0
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HD
– EEE-106 –
■Standard Prod ucts
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+10 5 °C)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours)
(mm) (mm) (mm) (mm) (pcs) (pcs)
50
0.1 5 11 1.1 0.12 1000 0.5 5.0 2.5
EEUHD1HR10( )✽✽✽
200 2000
0.22 5 11 2.3 0.12 1000 0.5 5.0 2.5
EEUHD1HR22( )✽✽✽
200 2000
0.33 5 11 3.5 0.12 1000 0.5 5.0 2.5
EEUHD1HR33( )✽✽✽
200 2000
0.47 5 11 5 0.12 1000 0.5 5.0 2.5
EEUHD1HR47( )✽✽✽
200 2000
1 5 11 10 0.12 1000 0.5 5.0 2.5
EEUHD1H1R0( )✽✽✽
200 2000
2.2 5 11 18 0.12 1000 0.5 5.0 2.5
EEUHD1H2R2( )
200 2000
3.3 5 11 22 0.12 1000 0.5 5.0 2.5
EEUHD1H3R3( )
200 2000
4.7 5 11 26 0.12 1000 0.5 5.0 2.5
EEUHD1H4R7( )
200 2000
10 5 11 39 0.12 1000 0.5 5.0 2.5
EEUHD1H100( )
200 2000
22 5 11 65 0.12 1000 0.5 5.0 2.5
EEUHD1H220( )
200 2000
33 5 11 90 0.12 1000 0.5 5.0 2.5
EEUHD1H330( )
200 2000
47 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5
EEUHD1H470( )
200 2000
68 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5
EEUHD1H680( )
200 2000
100 8 11.5 180 0.12 1000 0.6 3.5 5.0
EEUHD1H101( )
200 1000
220 10 12.5 300 0.12 2000 0.6 5.0 5.0
EEUHD1H221( )
200 500
330 10 16 410 0.12 2000 0.6 5.0 5.0
EEUHD1H331( )
200 500
470 10 20 530 0.12 2000 0.6 5.0 5.0
EEUHD1H471( )
200 500
560 16 15 650 0.12 2000 0.8 7.5 7.5
EEUHD1H561S( )
100 250
680 16 15 650 0.12 2000 0.8 7.5 7.5
EEUHD1H681S( )
100 250
1000 12.5 25 950 0.12 2000 0.6 5.0 5.0
EEUHD1H102( )
200 500
2200 16 31.5 1470 0.14 2000 0.8 7.5
EEUHD1H222
100
3300 18 35.5 1770 0.16 2000 0.8 7.5
EEUHD1H332
50
Endurance : 105 °C
05 to 08=1000 h, 010 to 018=2000 h
02 May. 2014
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ GA
– EEE-107 –
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L±1.0
+
–
fd±0.05
■ Features
● Endurance : 105 °C 1000 h
● RoHS directive compliant
Radial Lead Type
Series: GA Type: A
■ Speci cations
Category Temp. Range –55 °C to +105 °C
Rated W.V. Range 10 V.DC to 50 V.DC
Nominal Cap. Range 1.5 μF to 220 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan dPlease see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), for 1000 hours, when
the capacitors are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Capacitance change ±20 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■ Di men sions in mm(not to scale)
Body Dia. 0D4 5 6.3 8
Lead Dia. 0d 0.45 0.45 0.45 0.45
Lead space F 1.5 2.0 2.5 2.5
W.V.(V.DC) Cap (μF) Frequency (Hz)
60 120 1 k 10 k 100 k to
10 to 50 1.5 to 220 0.85 1.00 1.30 1.40 1.55
■ Frequency correction factor for ripple current
(Unit : mm)
03 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ GA
– EEE-108 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+10 5 °C)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours) (mm) (mm) (mm) (mm) (pcs) (pcs)
10
22 4 7 30 0.22 1000 0.45 1.5 5.0 2.5
EEAGA1A220( )
200 2000
33 5 7 50 0.22 1000 0.45 2.0 5.0 2.5
EEAGA1A330( )
200 2000
47 6.3 7 65 0.22 1000 0.45 2.5 5.0 2.5
EEAGA1A470( )
200 2000
68 6.3 7 75 0.22 1000 0.45 2.5 5.0 2.5
EEAGA1A680( )
200 2000
100 6.3 7 110 0.22 1000 0.45 2.5 5.0 2.5
EEAGA1A101( )
200 2000
220 8 7 160 0.22 1000 0.45 2.5 5.0 2.5
EEAGA1A221( )
200 1000
16
10 4 7 30 0.18 1000 0.45 1.5 5.0 2.5
EEAGA1C100( )
200 2000
15 4 7 33 0.18 1000 0.45 1.5 5.0 2.5
EEAGA1C150( )
200 2000
22 5 7 50 0.18 1000 0.45 2.0 5.0 2.5
EEAGA1C220( )
200 2000
33 6.3 7 65 0.18 1000 0.45 2.5 5.0 2.5
EEAGA1C330( )
200 2000
47 6.3 7 77 0.18 1000 0.45 2.5 5.0 2.5
EEAGA1C470( )
200 2000
100 8 7 120 0.18 1000 0.45 2.5 5.0 2.5
EEAGA1C101( )
200 1000
25
10 4 7 33 0.16 1000 0.45 1.5 5.0 2.5
EEAGA1E100( )
200 2000
15 5 7 45 0.16 1000 0.45 2.0 5.0 2.5
EEAGA1E150( )
200 2000
22 5 7 50 0.16 1000 0.45 2.0 5.0 2.5
EEAGA1E220( )
200 2000
33 6.3 7 75 0.16 1000 0.45 2.5 5.0 2.5
EEAGA1E330( )
200 2000
68 8 7 100 0.16 1000 0.45 2.5 5.0 2.5
EEAGA1E680( )
200 1000
35
6.8 4 7 33 0.13 1000 0.45 1.5 5.0 2.5
EEAGA1V6R8( )
200 2000
10 5 7 35 0.13 1000 0.45 2.0 5.0 2.5
EEAGA1V100( )
200 2000
15 6.3 7 50 0.13 1000 0.45 2.5 5.0 2.5
EEAGA1V150( )
200 2000
22 6.3 7 70 0.13 1000 0.45 2.5 5.0 2.5
EEAGA1V220( )
200 2000
47 8 7 96 0.13 1000 0.45 2.5 5.0 2.5
EEAGA1V470( )
200 1000
50
0.1 4 7 1.1 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1HR10( )✽✽✽
200 2000
0.15 4 7 1.7 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1HR15( )✽✽✽
200 2000
0.22 4 7 2.3 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1HR22( )✽✽✽
200 2000
0.33 4 7 3.5 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1HR33( )✽✽✽
200 2000
0.47 4 7 5 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1HR47( )✽✽✽
200 2000
0.68 4 7 7 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1HR68( )✽✽✽
200 2000
1 4 7 10 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1H1R0( )✽✽✽
200 2000
1.5 4 7 16 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1H1R5( )
200 2000
2.2 4 7 18 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1H2R2( )
200 2000
3.3 4 7 22 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1H3R3( )
200 2000
4.7 4 7 26 0.10 1000 0.45 1.5 5.0 2.5
EEAGA1H4R7( )
200 2000
6.8 5 7 35 0.10 1000 0.45 2.0 5.0 2.5
EEAGA1H6R8( )
200 2000
10 6.3 7 39 0.10 1000 0.45 2.5 5.0 2.5
EEAGA1H100( )
200 2000
15 6.3 7 55 0.10 1000 0.45 2.5 5.0 2.5
EEAGA1H150( )
200 2000
22 8 7 70 0.10 1000 0.45 2.5 5.0 2.5
EEAGA1H220( )
200 1000
33 8 7 91 0.10 1000 0.45 2.5 5.0 2.5
EEAGA1H330( )
200 1000
· When requesting taped product, please put the letter "B" or "H" be tween the "( )". Lead wire pitch ✽B=5 mm, H=2.5 mm.
Suffi x "BQ" for 08×7, 5mm pitch products
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
Endurance : 105 °C 1000 h
03 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ GA(Bi-polar)
– EEE-109 –
010
Sleeve
14 min.
3 min.
L=
Pressure relief
06.3
=L16 : L±1.0
L20 : L±2.0
08
0D±0.5
F±0.5
0D±0.5
fd±0.05
■ Features
● Endurance : 105 °C 1000 h to 2000 h
● RoHS directive compliant
Radial Lead Type
Series: GA(Bi-polar) Type: A
■ Di men sions in mm (not to scale)
Body Dia. 0D5 6.3 8 10
Lead Dia. 0d 0.5 0.5 0.6 0.6
Lead space F 2.0 2.5 3.5 5.0
■ Speci cations
Category Temp. Range –40 °C to +105 °C
Rated W.V. Range 6.3 V.DC to 50 V.DC
Nominal Cap. Range 2.2 μF to 330 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent
I < 0.03 CV +3 (μA) After 2 minutes
or
I < 0.03 CV or 3 (μA) After 5 minutes (Whichever is greater)
tan dPlease see the attached standard products list
Endurance
After following life test of DC working voltage at +105 °C±2 °C
when the capacitors are restored to 20 °C, the capacitors shall meet the following limits.
Duration
05 to 08 : 1000 hours (500 hours for each polarity)
010 : 2000 hours (1000 hours for each polarity)
Capacitance change ± 20% of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Frequency (Hz)
50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
■ Frequency correction factor for ripple current
(Unit : mm)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ GA(Bi-polar)
– EEE-110 –
■ Standard Prod ucts (Bi-polar)
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+10 5 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
6.3 100 6.3 11.2 130 0.30 0.5 2.5 5.0 2.5
ECA0JEN101( )
200 2000
330 8 11.5 250 0.30 0.6 3.5 5.0
ECA0JEN331( )
200 1000
10 47 5 11 90 0.24 0.5 2.0 5.0 2.5
ECA1AEN470( )
200 2000
16
10 5 11 40 0.20 0.5 2.0 5.0 2.5
ECA1CEN100( )
200 2000
22 5 11 60 0.20 0.5 2.0 5.0 2.5
ECA1CEN220( )
200 2000
33 5 11 80 0.20 0.5 2.0 5.0 2.5
ECA1CEN330( )
200 2000
47 6.3 11.2 100 0.20 0.5 2.5 5.0 2.5
ECA1CEN470( )
200 2000
25
10 5 11 45 0.15 0.5 2.0 5.0 2.5
ECA1EEN100( )
200 2000
22 6.3 11.2 60 0.15 0.5 2.5 5.0 2.5
ECA1EEN220( )
200 2000
33 6.3 11.2 90 0.15 0.5 2.5 5.0 2.5
ECA1EEN330( )
200 2000
47 6.3 11.2 110 0.15 0.5 2.5 5.0 2.5
ECA1EEN470( )
200 2000
100 8 11.5 180 0.15 0.6 3.5 5.0
ECA1EEN101( )
200 1000
35 33 8 11.5 100 0.15 0.6 3.5 5.0
ECA1VEN330( )
200 1000
100 10 16 230 0.15 0.6 5.0 5.0
ECA1VEN101( )
200 500
50
0.47 5 11 10 0.15 0.5 2.0 5.0 2.5
ECA1HENR47( )✽✽✽
200 2000
1 5 11 10 0.15 0.5 2.0 5.0 2.5
ECA1HEN010( )✽✽✽
200 2000
2.2 5 11 18 0.15 0.5 2.0 5.0 2.5
ECA1HEN2R2( )
200 2000
3.3 5 11 25 0.15 0.5 2.0 5.0 2.5
ECA1HEN3R3( )
200 2000
4.7 5 11 30 0.15 0.5 2.0 5.0 2.5
ECA1HEN4R7( )
200 2000
10 6.3 11.2 50 0.15 0.5 2.5 5.0 2.5
ECA1HEN100( )
200 2000
22 8 11.5 90 0.15 0.6 3.5 5.0
ECA1HEN220( )
200 1000
33 8 11.5 110 0.15 0.6 3.5 5.0
ECA1HEN330( )
200 1000
47 10 12.5 140 0.15 0.6 5.0 5.0
ECA1HEN470( )
200 500
100 10 20 250 0.15 0.6 5.0 5.0
ECA1HEN101( )
200 500
· When requesting taped product, please put the letter "B" or "i" be tween the "( )". Lead wire pitch ✽B=5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
Endurance : 105 °C 05 to 08=1000 h (500 h for each polarity), 010=2000 h (1000 h for each polarity)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ M
– EEE-111 –
010
Sleeve
14 min.
3 min.
L=
06.3
=L16 : L±1.0
L20 : L±2.0
Pressure relief +
–
08
0D+0.5
F±0.5
0D+0.5
fd±0.05
■ Features
● Endurance : 85 °C 2000 h
● Smaller than series SU
● RoHS directive compliant
Radial Lead Type
Series: M Type: A
■ Speci cations
Category Temp. Range –40 °C to + 85 °C –25 °C to +85 °C
Rated W.V. Range 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC
Nominal Cap. Range 2.2 μF to 22000 μF 1 μF to 470 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes
(Whichever is greater) I < 0.06 CV +10 (μA) After 2 minutes
tan dPlease see the attached standard products list
Endurance
After applying rated working voltage for 2000 hours at +85°C±2 °C, when the capacitors are
restored to 20 °C, capacitors shall meet the following limits.
Capacitance change ±20 % of initial measured value
tan d<150 % of initial specifi ed value
DC leakage current <initial specifi ed value
Shelf Life After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■ Di men sions in mm (not to scale)
Body Dia. 0D5 6.3 8 1012.516 18
Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
Frequency (Hz)
50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
■ Frequency correction factor for ripple current
(Unit : mm)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ M
– EEE-112 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
6.3
220 5 11 240 0.28 0.5 2.0 5.0 2.5 ECA0JM221( ) 200 2000
470 6.3 11.2 380 0.28 0.5 2.5 5.0 2.5 ECA0JM471( ) 200 2000
1000 8 11.5 580 0.28 0.6 3.5 5.0 ECA0JM102( ) 200 1000
2200 10 16 890 0.30 0.6 5.0 5.0 ECA0JM222( ) 200 500
3300 10 20 1020 0.32 0.6 5.0 5.0 ECA0JM332( ) 200 500
4700 12.5 20 1170 0.34 0.6 5.0 5.0 ECA0JM472( ) 200 500
6800 12.5 25 1270 0.38 0.6 5.0 5.0 ECA0JM682( ) 200 500
10000 16 25 1450 0.46 0.8 7.5 7.5 ECA0JM103( ) 100 250
15000 16 31.5 1700 0.56 0.8 7.5 ECA0JM153 100
22000 18 35.5 1900 0.70 0.8 7.5 ECA0JM223 50
10
330 6.3 11.2 330 0.24 0.5 2.5 5.0 2.5 ECA1AM331( ) 200 2000
1000 10 12.5 630 0.24 0.6 5.0 5.0 ECA1AM102( ) 200 500
2200 10 20 920 0.26 0.6 5.0 5.0 ECA1AM222( ) 200 500
3300 12.5 20 1090 0.28 0.6 5.0 5.0 ECA1AM332( ) 200 500
4700 12.5 25 1200 0.30 0.6 5.0 5.0 ECA1AM472( ) 200 500
6800 16 25 1400 0.34 0.8 7.5 7.5 ECA1AM682( ) 100 250
10000 16 31.5 1600 0.42 0.8 7.5 ECA1AM103 100
15000 18 35.5 1850 0.52 0.8 7.5 ECA1AM153 50
16
10 5 11 30 0.20 0.5 2.0 5.0 2.5 ECA1CM100( ) 200 2000
22 5 11 75 0.20 0.5 2.0 5.0 2.5 ECA1CM220( ) 200 2000
33 5 11 110 0.20 0.5 2.0 5.0 2.5 ECA1CM330( ) 200 2000
47 5 11 130 0.20 0.5 2.0 5.0 2.5 ECA1CM470( ) 200 2000
100 5 11 180 0.20 0.5 2.0 5.0 2.5 ECA1CM101( ) 200 2000
220 6.3 11.2 280 0.20 0.5 2.5 5.0 2.5 ECA1CM221( ) 200 2000
470 8 11.5 440 0.20 0.6 3.5 5.0 ECA1CM471( ) 200 1000
1000 10 16 680 0.20 0.6 5.0 5.0 ECA1CM102( ) 200 500
2200 12.5 20 1000 0.22 0.6 5.0 5.0 ECA1CM222( ) 200 500
3300 12.5 25 1200 0.24 0.6 5.0 5.0 ECA1CM332( ) 200 500
4700 16 25 1360 0.26 0.8 7.5 7.5 ECA1CM472( ) 100 250
6800 16 31.5 1600 0.30 0.8 7.5 ECA1CM682 100
10000 18 35.5 1800 0.38 0.8 7.5 ECA1CM103 50
25
100 6.3 11.2 180 0.16 0.5 2.5 5.0 2.5 ECA1EM101( ) 200 2000
330 8 11.5 390 0.16 0.6 3.5 5.0 ECA1EM331( ) 200 1000
470 10 12.5 480 0.16 0.6 5.0 5.0 ECA1EM471( ) 200 500
1000 10 20 850 0.16 0.6 5.0 5.0 ECA1EM102( ) 200 500
2200 12.5 25 1200 0.18 0.6 5.0 5.0 ECA1EM222( ) 200 500
3300 16 25 1300 0.20 0.8 7.5 7.5 ECA1EM332( ) 100 250
4700 16 31.5 1500 0.22 0.8 7.5 ECA1EM472 100
6800 18 35.5 1750 0.26 0.8 7.5 ECA1EM682 50
35
47 5 11 130 0.14 0.5 2.0 5.0 2.5 ECA1VM470( ) 200 2000
100 6.3 11.2 210 0.14 0.5 2.5 5.0 2.5 ECA1VM101( ) 200 2000
220 8 11.5 350 0.14 0.6 3.5 5.0 ECA1VM221( ) 200 1000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 85 °C 2000 h
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ M
– EEE-113 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
35
330 10 12.5 440 0.14 0.6 5.0 5.0 ECA1VM331( ) 200 500
470 10 16 550 0.14 0.6 5.0 5.0 ECA1VM471( ) 200 500
1000 12.5 20 900 0.14 0.6 5.0 5.0 ECA1VM102( ) 200 500
2200 16 25 1250 0.16 0.8 7.5 7.5 ECA1VM222( ) 100 250
3300 16 31.5 1400 0.18 0.8 7.5 ECA1VM332 100
4700 18 35.5 1600 0.20 0.8 7.5 ECA1VM472 50
50
0.1 5 11 1.3 0.12 0.5 2.0 5.0 2.5 ECA1HM0R1( )✽✽✽ 200 2000
0.22 5 11 2.9 0.12 0.5 2.0 5.0 2.5 ECA1HMR22( )✽✽✽ 200 2000
0.33 5 11 4.4 0.12 0.5 2.0 5.0 2.5 ECA1HMR33( )✽✽✽ 200 2000
0.47 5 11 5 0.12 0.5 2.0 5.0 2.5 ECA1HMR47( )✽✽✽ 200 2000
1 5 11 10 0.12 0.5 2.0 5.0 2.5 ECA1HM010( )✽✽✽ 200 2000
2.2 5 11 20 0.12 0.5 2.0 5.0 2.5 ECA1HM2R2( ) 200 2000
3.3 5 11 35 0.12 0.5 2.0 5.0 2.5 ECA1HM3R3( ) 200 2000
4.7 5 11 45 0.12 0.5 2.0 5.0 2.5 ECA1HM4R7( ) 200 2000
10 5 11 65 0.12 0.5 2.0 5.0 2.5 ECA1HM100( ) 200 2000
22 5 11 100 0.12 0.5 2.0 5.0 2.5 ECA1HM220( ) 200 2000
33 5 11 110 0.12 0.5 2.0 5.0 2.5 ECA1HM330( ) 200 2000
47 6.3 11.2 130 0.12 0.5 2.5 5.0 2.5 ECA1HM470( ) 200 2000
100 8 11.5 250 0.12 0.6 3.5 5.0 ECA1HM101( ) 200 1000
220 10 12.5 400 0.12 0.6 5.0 5.0 ECA1HM221( ) 200 500
330 10 16 500 0.12 0.6 5.0 5.0 ECA1HM331( ) 200 500
470 10 20 650 0.12 0.6 5.0 5.0 ECA1HM471( ) 200 500
1000 12.5 25 1050 0.12 0.6 5.0 5.0 ECA1HM102( ) 200 500
2200 16 31.5 1300 0.14 0.8 7.5 ECA1HM222 100
3300 18 35.5 1500 0.16 0.8 7.5 ECA1HM332 50
63
10 5 11 70 0.11 0.5 2.0 5.0 2.5 ECA1JM100( ) 200 2000
22 5 11 105 0.11 0.5 2.0 5.0 2.5 ECA1JM220( ) 200 2000
33 6.3 11.2 130 0.11 0.5 2.5 5.0 2.5 ECA1JM330( ) 200 2000
47 6.3 11.2 160 0.11 0.5 2.5 5.0 2.5 ECA1JM470( ) 200 2000
100 8 11.5 270 0.11 0.6 3.5 5.0 ECA1JM101( ) 200 1000
220 10 16 450 0.11 0.6 5.0 5.0 ECA1JM221( ) 200 500
330 10 20 550 0.11 0.6 5.0 5.0 ECA1JM331( ) 200 500
470 12.5 20 750 0.11 0.6 5.0 5.0 ECA1JM471( ) 200 500
1000 16 25 1100 0.11 0.8 7.5 7.5 ECA1JM102( ) 100 250
2200 18 35.5 1400 0.13 0.8 7.5 ECA1JM222 50
100
0.47 5 11 10 0.10 0.5 2.0 5.0 2.5 ECA2AMR47( )✽✽✽ 200 2000
1 5 11 20 0.10 0.5 2.0 5.0 2.5 ECA2AM010( )✽✽✽ 200 2000
2.2 5 11 30 0.10 0.5 2.0 5.0 2.5 ECA2AM2R2( ) 200 2000
3.3 5 11 40 0.10 0.5 2.0 5.0 2.5 ECA2AM3R3( ) 200 2000
4.7 5 11 50 0.10 0.5 2.0 5.0 2.5 ECA2AM4R7( ) 200 2000
10 5 11 70 0.10 0.5 2.0 5.0 2.5 ECA2AM100( ) 200 2000
22 6.3 11.2 115 0.10 0.5 2.5 5.0 2.5 ECA2AM220( ) 200 2000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
Endurance : 85 °C 2000 h
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ M
– EEE-114 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
100
33 8 11.5 145 0.10 0.6 3.5 5.0 ECA2AM330( ) 200 1000
47 8 11.5 180 0.10 0.6 3.5 5.0 ECA2AM470( ) 200 1000
100 10 16 350 0.10 0.6 5.0 5.0 ECA2AM101( ) 200 500
220 12.5 20 550 0.10 0.6 5.0 5.0 ECA2AM221( ) 200 500
330 12.5 25 700 0.10 0.6 5.0 5.0 ECA2AM331( ) 200 500
470 16 25 900 0.10 0.8 7.5 7.5 ECA2AM471( ) 100 250
1000 18 35.5 1300 0.10 0.8 7.5 ECA2AM102 50
160
1 6.3 11.2 36 0.16 0.5 2.5 5.0 2.5 ECA2CM010( ) 200 2000
2.2 6.3 11.2 53 0.16 0.5 2.5 5.0 2.5 ECA2CM2R2( ) 200 2000
3.3 6.3 11.2 66 0.16 0.5 2.5 5.0 2.5 ECA2CM3R3( ) 200 2000
4.7 6.3 11.2 78 0.16 0.5 2.5 5.0 2.5 ECA2CM4R7( ) 200 2000
10 10 12.5 105 0.16 0.6 5.0 5.0 ECA2CM100( ) 200 500
22 10 16 175 0.16 0.6 5.0 5.0 ECA2CM220( ) 200 500
33 10 20 235 0.16 0.6 5.0 5.0 ECA2CM330( ) 200 500
47 12.5 20 320 0.16 0.6 5.0 5.0 ECA2CM470( ) 200 500
100 12.5 25 515 0.16 0.6 5.0 5.0 ECA2CM101( ) 200 500
220 16 31.5 830 0.16 0.8 7.5 ECA2CM221 100
330 18 31.5 1090 0.16 0.8 7.5 ECA2CM331 50
470 18 40 1440 0.16 0.8 7.5 ECA2CM471 50
200
1 6.3 11.2 34 0.18 0.5 2.5 5.0 2.5 ECA2DM010( ) 200 2000
2.2 6.3 11.2 50 0.18 0.5 2.5 5.0 2.5 ECA2DM2R2( ) 200 2000
3.3 6.3 11.2 62 0.18 0.5 2.5 5.0 2.5 ECA2DM3R3( ) 200 2000
4.7 8 11.5 86 0.18 0.6 3.5 5.0 ECA2DM4R7( ) 200 1000
10 10 12.5 100 0.18 0.6 5.0 5.0 ECA2DM100( ) 200 500
22 10 20 180 0.18 0.6 5.0 5.0 ECA2DM220( ) 200 500
33 10 20 220 0.18 0.6 5.0 5.0 ECA2DM330( ) 200 500
47 12.5 20 300 0.18 0.6 5.0 5.0 ECA2DM470( ) 200 500
100 16 25 475 0.18 0.8 7.5 7.5 ECA2DM101( ) 100 250
220 18 31.5 835 0.18 0.8 7.5 ECA2DM221 50
330 18 40 1140 0.18 0.8 7.5 ECA2DM331 50
250
1 6.3 11.2 34 0.18 0.5 2.5 5.0 2.5 ECA2EM010( ) 200 2000
2.2 6.3 11.2 50 0.18 0.5 2.5 5.0 2.5 ECA2EM2R2( ) 200 2000
3.3 8 11.5 72 0.18 0.6 3.5 5.0 ECA2EM3R3( ) 200 1000
4.7 8 11.5 86 0.18 0.6 3.5 5.0 ECA2EM4R7( ) 200 1000
10 10 16 110 0.18 0.6 5.0 5.0 ECA2EM100( ) 200 500
22 10 20 180 0.18 0.6 5.0 5.0 ECA2EM220( ) 200 500
33 12.5 20 250 0.18 0.6 5.0 5.0 ECA2EM330( ) 200 500
47 12.5 25 330 0.18 0.6 5.0 5.0 ECA2EM470( ) 200 500
100 16 31.5 530 0.18 0.8 7.5 ECA2EM101 100
220 18 40 930 0.18 0.8 7.5 ECA2EM221 50
350 1 6.3 11.2 32 0.20 0.5 2.5 5.0 2.5 ECA2VM010( ) 200 2000
2.2 8 11.5 55 0.20 0.6 3.5 5.0 ECA2VM2R2( ) 200 1000
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 85 °C 2000 h
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ M
– EEE-115 –
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
350
3.3 8 11.5 60 0.20 0.6 3.5 5.0 ECA2VM3R3( ) 200 1000
4.7 10 12.5 65 0.20 0.6 5.0 5.0 ECA2VM4R7( ) 200 500
10 10 20 115 0.20 0.6 5.0 5.0 ECA2VM100( ) 200 500
22 12.5 20 195 0.20 0.6 5.0 5.0 ECA2VM220( ) 200 500
33 16 25 300 0.20 0.8 7.5 7.5 ECA2VM330( ) 100 250
47 16 25 325 0.20 0.8 7.5 7.5 ECA2VM470( ) 100 250
100 18 31.5 535 0.20 0.8 7.5 ECA2VM101 50
400
1 6.3 11.2 32 0.20 0.5 2.5 5.0 2.5 ECA2GM010( ) 200 2000
2.2 8 11.5 50 0.20 0.6 3.5 5.0 ECA2GM2R2( ) 200 1000
3.3 10 12.5 54 0.20 0.6 5.0 5.0 ECA2GM3R3( ) 200 500
4.7 10 16 72 0.20 0.6 5.0 5.0 ECA2GM4R7( ) 200 500
10 10 20 115 0.20 0.6 5.0 5.0 ECA2GM100( ) 200 500
22 12.5 25 215 0.20 0.6 5.0 5.0 ECA2GM220( ) 200 500
33 16 25 275 0.20 0.8 7.5 7.5 ECA2GM330( ) 100 250
47 16 31.5 350 0.20 0.8 7.5 ECA2GM470 100
100 18 40 600 0.20 0.8 7.5 ECA2GM101 50
450
1 8 11.5 37 0.20 0.6 3.5 5.0 ECA2WM010( ) 200 1000
2.2 10 12.5 44 0.20 0.6 5.0 5.0 ECA2WM2R2( ) 200 500
3.3 10 16 60 0.20 0.6 5.0 5.0 ECA2WM3R3( ) 200 500
4.7 10 20 79 0.20 0.6 5.0 5.0 ECA2WM4R7( ) 200 500
10 12.5 20 130 0.20 0.6 5.0 5.0 ECA2WM100( ) 200 500
22 16 25 210 0.20 0.8 7.5 7.5 ECA2WM220( ) 100 250
33 16 31.5 285 0.20 0.8 7.5 ECA2WM330 100
■ Standard Prod ucts
· When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance : 85 °C 2000 h
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ SU(Bi-polar)
– EEE-116 –
08
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L=
Pressure relief
06.3
=L16 : L±1.0
L20 : L±2.0
010
0D±0.5
fd±0.05
■ Features
● Endurance : 85 °C 2000 h
● RoHS directive compliant
Radial Lead Type
Series: SU(Bi-polar) Type: A
■ Di men sions in mm (not to scale)
■ Speci cations
Category Temp. Range –40 °C to +85 °C
Rated W.V. Range 6.3 V.DC to 50 V.DC
Nominal Cap. Range 2.2 μF to 6800 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.03 CV +3 (μA) After 5 minutes
tan dPlease see the attached standard products list.
Endurance
After 2000 hours application of DC working voltage (1000 hours for each polarity) at +85 °C±2 °C,
when the capacitors are restored to 20 °C, the capacitors shall meet the following limits.
Capacitance change ± 20 % of initial measured value
tan d< 150 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
Body Dia. 0D5 6.3 8 1012.516 18
Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
Frequency (Hz)
50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
■ Frequency correction factor for ripple current
(Unit : mm)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ SU(Bi-polar)
– EEE-117 –
■ Standard Prod ucts (Bi-polar)
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (mm) (mm) (mm) (mm) (pcs) (pcs)
6.3
330 8 11.5 250 0.30 0.6 3.5 5.0 ECEA0JN331U( ) 200 1000
470 10 12.5 310 0.30 0.6 5.0 5.0 ECEA0JN471X( ) 200 500
1000 10 20 430 0.30 0.6 5.0 5.0 ECEA0JN102U( ) 200 500
2200 12.5 25 660 0.32 0.6 5.0 5.0 ECEA0JN222U( ) 200 500
3300 16 25 760 0.34 0.8 7.5 7.5 ECEA0JN332U( ) 100 250
4700 16 31.5 1170 0.36 0.8 7.5 ECEA0JN472U 100
6800 18 35.5 1450 0.40 0.8 7.5 ECEA0JN682U 50
10
47 5 11 90 0.25 0.5 2.0 5.0 2.5 ECEA1AN470U( ) 200 2000
100 6.3 11.2 130 0.25 0.5 2.5 5.0 2.5 ECEA1AN101X( ) 200 2000
220 8 11.5 200 0.25 0.6 3.5 5.0 ECEA1AN221U( ) 200 1000
330 10 16 280 0.25 0.6 5.0 5.0 ECEA1AN331U( ) 200 500
470 10 16 340 0.25 0.6 5.0 5.0 ECEA1AN471U( ) 200 500
1000 12.5 20 470 0.25 0.6 5.0 5.0 ECEA1AN102X( ) 200 500
2200 16 25 690 0.27 0.8 7.5 7.5 ECEA1AN222U( ) 100 250
3300 16 31.5 1090 0.29 0.8 7.5 ECEA1AN332U 100
4700 18 35.5 1200 0.31 0.8 7.5 ECEA1AN472U 50
16
10 5 11 40 0.20 0.5 2.0 5.0 2.5 ECEA1CN100U( ) 200 2000
22 5 11 60 0.20 0.5 2.0 5.0 2.5 ECEA1CN220U( ) 200 2000
33 5 11 80 0.20 0.5 2.0 5.0 2.5 ECEA1CN330U( ) 200 2000
47 6.3 11.2 100 0.20 0.5 2.5 5.0 2.5 ECEA1CN470U( ) 200 2000
220 10 12.5 260 0.20 0.6 5.0 5.0 ECEA1CN221X( ) 200 500
330 10 16 330 0.20 0.6 5.0 5.0 ECEA1CN331U( ) 200 500
470 10 20 380 0.20 0.6 5.0 5.0 ECEA1CN471U( ) 200 500
1000 12.5 25 560 0.20 0.6 5.0 5.0 ECEA1CN102U( ) 200 500
2200 16 31.5 750 0.22 0.8 7.5 ECEA1CN222U 100
3300 18 35.5 900 0.24 0.8 7.5 ECEA1CN332U 50
25
10 5 11 45 0.15 0.5 2.0 5.0 2.5 ECEA1EN100U( ) 200 2000
22 5 11 60 0.15 0.5 2.0 5.0 2.5 ECEA1EN220X( ) 200 2000
33 6.3 11.2 90 0.15 0.5 2.5 5.0 2.5 ECEA1EN330U( ) 200 2000
47 6.3 11.2 110 0.15 0.5 2.5 5.0 2.5 ECEA1EN470U( ) 200 2000
100 8 11.5 180 0.15 0.6 3.5 5.0 ECEA1EN101U( ) 200 1000
220 10 16 320 0.15 0.6 5.0 5.0 ECEA1EN221U( ) 200 500
330 12.5 20 350 0.15 0.6 5.0 5.0 ECEA1EN331U( ) 200 500
470 12.5 20 430 0.15 0.6 5.0 5.0 ECEA1EN471U( ) 200 500
1000 16 25 680 0.15 0.8 7.5 7.5 ECEA1EN102U( ) 100 250
2200 18 35.5 900 0.17 0.8 7.5 ECEA1EN222U 50
35
10 5 11 43 0.15 0.5 2.0 5.0 2.5 ECEA1VN100U( ) 200 2000
22 6.3 11.2 80 0.15 0.5 2.5 5.0 2.5 ECEA1VN220U( ) 200 2000
33 8 11.5 100 0.15 0.6 3.5 5.0 ECEA1VN330U( ) 200 1000
47 8 11.5 120 0.15 0.6 3.5 5.0 ECEA1VN470U( ) 200 1000
100 10 16 230 0.15 0.6 5.0 5.0 ECEA1VN101U( ) 200 500
220 12.5 20 360 0.15 0.6 5.0 5.0 ECEA1VN221U( ) 200 500
330 12.5 20 450 0.15 0.6 5.0 5.0 ECEA1VN331U( ) 200 500
470 12.5 25 590 0.15 0.6 5.0 5.0 ECEA1VN471U( ) 200 500
· When requesting taped product, please put the letter "B" or "i" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
Endurance: 85 °C 2000 h (1000 hours for each polarity)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ SU(Bi-polar)
– EEE-118 –
■ Standard Prod ucts (Bi-polar)
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(Ω) (mm) (mm) (mm) (mm) (pcs) (pcs)
50
0.47 5 11 10 0.15 0.5 2.0 5.0 2.5
ECEA1HNR47U( )
✽✽✽
200 2000
1 5 11 10 0.15 0.5 2.0 5.0 2.5
ECEA1HN010U( )
✽✽✽
200 2000
2.2 5 11 18 0.15 0.5 2.0 5.0 2.5
ECEA1HN2R2U( )
200 2000
3.3 5 11 25 0.15 0.5 2.0 5.0 2.5
ECEA1HN3R3U( )
200 2000
4.7 5 11 30 0.15 0.5 2.0 5.0 2.5
ECEA1HN4R7U( )
200 2000
10 6.3 11.2 50 0.15 0.5 2.5 5.0 2.5
ECEA1HN100U( )
200 2000
22 8 11.5 90 0.15 0.6 3.5 5.0
ECEA1HN220U( )
200 1000
33 8 11.5 110 0.15 0.6 3.5 5.0
ECEA1HN330U( )
200 1000
47 10 12.5 140 0.15 0.6 5.0 5.0
ECEA1HN470U( )
200 500
100 10 20 250 0.15 0.6 5.0 5.0
ECEA1HN101U( )
200 500
220 12.5 25 360 0.15 0.6 5.0 5.0
ECEA1HN221U( )
200 500
330 16 25 450 0.15 0.8 7.5 7.5
ECEA1HN331U( )
100 250
470 16 31.5 590 0.15 0.8 7.5
ECEA1HN471U
100
· When requesting taped product, please put the letter "B" or "i" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
Endurance: 85 °C 2000 h (1000 hours for each polarity)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ KA
– EEE-119 –
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L±1.0
+
–
fd±0.05
■ Features
● Endurance : 85° C 1000 h
● 7 mm height
● RoHS directive compliant
■ Di men sions in mm (not to scale)
■ Speci cations
Category Temp. Range –40 °C to +85 °C
Rated W.V. Range 4 V.DC to 50 V.DC
Nominal Cap. Range 2.2 μF to 470 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan dPlease see the attached standard products list
Endurance
After applying rated working voltage for 1000 hours at +85 °C±2 °C when the capacitors are
restored to 20 °C, capacitors shall meet the following limits.
Capacitance change ± 20% of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Radial Lead Type
Series: KA Type: A
M
KA
7 mm height
↑
Low Profi le
Body Dia. 0D4 5 6.3 8
Lead Dia. 0d 0.45 0.45 0.45 0.45
Lead space F 1.5 2.0 2.5 2.5
Frequency (Hz)
50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
■ Frequency correction factor for ripple current
(Unit : mm)
02 Apr. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ KA
– EEE-120 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
4
47 4 7 34 0.35 0.45 1.5 5.0 2.5
ECEA0GKA470( )
200 2000
100 5 7 61 0.35 0.45 2.0 5.0 2.5
ECEA0GKA101( )
200 2000
220 6.3 7 82 0.35 0.45 2.5 5.0 2.5
ECEA0GKA221( )
200 2000
330 871100.350.452.5 2.5
ECEA0GKA331( )
200 1000
871100.350.45 5.0
ECEA0GKA331Q
1000
470 871400.350.452.5 2.5
ECEA0GKA471( )
200 1000
871400.350.45 5.0
ECEA0GKA471Q
1000
6.3
47 4 7 46 0.24 0.45 1.5 5.0 2.5
ECEA0JKA470( )
200 2000
100 5 7 71 0.24 0.45 2.0 5.0 2.5
ECEA0JKA101( )
200 2000
220 6.3 7 103 0.24 0.45 2.5 5.0 2.5
ECEA0JKA221( )
200 2000
330 871300.240.452.5 2.5
ECEA0JKA331( )
200 1000
871300.240.45 5.0
ECEA0JKA331Q
1000
10
33 4 7 43 0.20 0.45 1.5 5.0 2.5
ECEA1AKA330( )
200 2000
100 6.3 7 80 0.20 0.45 2.5 5.0 2.5
ECEA1AKA101( )
200 2000
220 871200.200.452.5 2.5
ECEA1AKA221( )
200 1000
871200.200.45 5.0
ECEA1AKA221Q
1000
16
10 4 7 28 0.16 0.45 1.5 5.0 2.5
ECEA1CKA100( )
200 2000
22 4 7 39 0.16 0.45 1.5 5.0 2.5
ECEA1CKA220( )
200 2000
33 5 7 60 0.16 0.45 2.0 5.0 2.5
ECEA1CKA330( )
200 2000
47 5 7 70 0.16 0.45 2.0 5.0 2.5
ECEA1CKA470( )
200 2000
100 6.3 7 91 0.16 0.45 2.5 5.0 2.5
ECEA1CKA101( )
200 2000
25
10 4 7 28 0.14 0.45 1.5 5.0 2.5
ECEA1EKA100( )
200 2000
22 5 7 55 0.14 0.45 2.0 5.0 2.5
ECEA1EKA220( )
200 2000
33 6.3 7 65 0.14 0.45 2.5 5.0 2.5
ECEA1EKA330( )
200 2000
47 6.3 7 70 0.14 0.45 2.5 5.0 2.5
ECEA1EKA470( )
200 2000
35
10 5 7 30 0.12 0.45 2.0 5.0 2.5
ECEA1VKA100( )
200 2000
22 6.3 7 60 0.12 0.45 2.5 5.0 2.5
ECEA1VKA220( )
200 2000
33 6.3 7 65 0.12 0.45 2.5 5.0 2.5
ECEA1VKA330( )
200 2000
47 8 7 85 0.12 0.45 2.5 2.5
ECEA1VKA470( )
200 1000
8 7 85 0.12 0.45 5.0
ECEA1VKA470Q
1000
50
0.1 4 7 1 0.10 0.45 1.5 5.0 2.5
ECEA1HKA0R1( )✽✽✽
200 2000
0.22 4 7 2 0.10 0.45 1.5 5.0 2.5
ECEA1HKAR22( )✽✽✽
200 2000
0.33 4 7 3 0.10 0.45 1.5 5.0 2.5
ECEA1HKAR33( )✽✽✽
200 2000
0.47 4 7 5 0.10 0.45 1.5 5.0 2.5
ECEA1HKAR47( )✽✽✽
200 2000
1 4 7 10 0.10 0.45 1.5 5.0 2.5
ECEA1HKA010( )✽✽✽
200 2000
2.2 4 7 16 0.10 0.45 1.5 5.0 2.5
ECEA1HKA2R2( )
200 2000
3.3 4 7 18 0.10 0.45 1.5 5.0 2.5
ECEA1HKA3R3( )
200 2000
4.7 4 7 23 0.10 0.45 1.5 5.0 2.5
ECEA1HKA4R7( )
200 2000
10 5 7 35 0.10 0.45 2.0 5.0 2.5
ECEA1HKA100( )
200 2000
22 6.3 7 60 0.10 0.45 2.5 5.0 2.5
ECEA1HKA220( )
200 2000
33 8 7 75 0.10 0.45 2.5 2.5
ECEA1HKA330( )
200 1000
8 7 75 0.10 0.45 5.0
ECEA1HKA330Q
1000
· When requesting taped product, please put the letter "B" or "i" be tween the "( )". Lead wire pitch ✽B=5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
Endurance : 85 °C 1000 h
02 Apr. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ KA-(Bi-polar)
– EEE-121 –
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L±1.0
fd±0.05
Radial Lead Type
Series: KA(Bi-polar) Type: A
■ Speci cations
Category Temp. Range –40 °C to +85 °C
Rated W.V. Range 4 V.DC to 50 V.DC
Nominal Cap. Range 2.2 μF to 100 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.05 CV or 10 (μA) After 2 minutes (Whichever is greater)
tan dPlease see the attached standard products list
Endurance
After 1000 hours application of DC working voltage (500 hours for each polarity) at +85 °C±2 °C,
when the capacitors are restored to 20 °C, the capacitors shall meet the following limits.
Capacitance change ± 20% of initial measured value
tan d<200 % of initial specifi ed value
DC leakage current <initial specifi ed value
Shelf Life After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
■ Features
● Endurance : 85° C 1000 h
● 7 mm height
● RoHS directive compliant
Body Dia. 0D4 5 6.3
Lead Dia. 0d 0.45 0.45 0.45
Lead space F 1.5 2.0 2.5
Frequency (Hz)
50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
■ Frequency correction factor for ripple current
■ Di men sions in mm (not to scale) (Unit : mm)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ KA-(Bi-polar)
– EEE-122 –
■ Standard Prod ucts (Bi-polar)
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
4100 6.3 7 61 0.35 0.45 2.5 5.0 2.5
ECEA0GKN101( )
200 2000
6.3
22 5 7 29 0.24 0.45 2.0 5.0 2.5
ECEA0JKN220( )
200 2000
33 5 7 38 0.24 0.45 2.0 5.0 2.5
ECEA0JKN330( )
200 2000
47 6.3 7 46 0.24 0.45 2.5 5.0 2.5
ECEA0JKN470( )
200 2000
10
10 4 7 25 0.20 0.45 1.5 5.0 2.5
ECEA1AKN100( )
200 2000
22 5 7 35 0.20 0.45 2.0 5.0 2.5
ECEA1AKN220( )
200 2000
33 6.3 7 43 0.20 0.45 2.5 5.0 2.5
ECEA1AKN330( )
200 2000
47 6.3 7 65 0.20 0.45 2.5 5.0 2.5
ECEA1AKN470( )
200 2000
16
4.7 4 7 20 0.16 0.45 1.5 5.0 2.5
ECEA1CKN4R7( )
200 2000
10 5 7 25 0.16 0.45 2.0 5.0 2.5
ECEA1CKN100( )
200 2000
22 6.3 7 39 0.16 0.45 2.5 5.0 2.5
ECEA1CKN220( )
200 2000
33 6.3 7 60 0.16 0.45 2.5 5.0 2.5
ECEA1CKN330( )
200 2000
25
3.3 4 7 16 0.16 0.45 1.5 5.0 2.5
ECEA1EKN3R3( )
200 2000
4.7 5 7 21 0.16 0.45 2.0 5.0 2.5
ECEA1EKN4R7( )
200 2000
10 6.3 7 28 0.16 0.45 2.5 5.0 2.5
ECEA1EKN100( )
200 2000
22 6.3 7 55 0.16 0.45 2.5 5.0 2.5
ECEA1EKN220( )
200 2000
35
2.2 4 7 12 0.14 0.45 1.5 5.0 2.5
ECEA1VKN2R2( )
200 2000
3.3 5 7 16 0.14 0.45 2.0 5.0 2.5
ECEA1VKN3R3( )
200 2000
4.7 5 7 22 0.14 0.45 2.0 5.0 2.5
ECEA1VKN4R7( )
200 2000
10 6.3 7 30 0.14 0.45 2.5 5.0 2.5
ECEA1VKN100( )
200 2000
50
0.1 4 7 1 0.12 0.45 1.5 5.0 2.5
ECEA1HKN0R1( )✽✽✽
200 2000
0.22 4 7 2 0.12 0.45 1.5 5.0 2.5
ECEA1HKNR22( )✽✽✽
200 2000
0.33 4 7 3 0.12 0.45 1.5 5.0 2.5
ECEA1HKNR33( )✽✽✽
200 2000
0.47 4 7 5 0.12 0.45 1.5 5.0 2.5
ECEA1HKNR47( )✽✽✽
200 2000
1 4 7 10 0.12 0.45 1.5 5.0 2.5
ECEA1HKN010( )✽✽✽
200 2000
2.2 5 7 16 0.12 0.45 2.0 5.0 2.5
ECEA1HKN2R2( )
200 2000
3.3 5 7 16 0.12 0.45 2.0 5.0 2.5
ECEA1HKN3R3( )
200 2000
4.7 6.3 7 23 0.12 0.45 2.5 5.0 2.5
ECEA1HKN4R7( )
200 2000
· When requesting taped product, please put the letter "B" or "i" be tween the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
Endurance : 85 °C 1000 h (500hours for each polarity)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ KS
– EEE-123 –
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L±1.0
+
–
fd±0.05
■ Features
● Endurance : 85° C 1000 h
● 5 mm height
● RoHS directive compliant
■ Speci cations
Category Temp. Range –40 °C to +85 °C
Rated W.V. Range 4 V.DC to 50 V.DC
Nominal Cap. Range 2.2 μF to 330 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes (Whichever is greater)
tan dPlease see the attached standard products list
Endurance
After applying rated working voltage for 1000 hours at +85 °C±2 °C, when the capacitors are
restored to 20°C capacitors, shall meet the following limits.
Capacitance change ± 20% of initial measured value (4 V : ±30 %)
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
Radial Lead Type
Series: KS Type: A
M
KA
7 mm height
↑
Low Profi le
Body Dia. 0D4 5 6.3 8
Lead Dia. 0d 0.45 0.45 0.45 0.45
Lead space F 1.5 2.0 2.5 2.5
↑
KS
5 mm height
Frequency (Hz)
50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
■ Frequency correction factor for ripple current
■ Di men sions in mm (not to scale) (Unit : mm)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ KS
– EEE-124 –
■ Standard Prod ucts
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
4
33 4 5 26 0.35 0.45 1.5 5.0 2.5
ECEA0GKS330( )
200 2000
47 4 5 34 0.35 0.45 1.5 5.0 2.5
ECEA0GKS470( )
200 2000
100 5 5 61 0.35 0.45 2.0 5.0 2.5
ECEA0GKS101( )
200 2000
220 6.3 5 82 0.35 0.45 2.5 5.0 2.5
ECEA0GKS221( )
200 2000
6.3
22 4 5 29 0.24 0.45 1.5 5.0 2.5
ECEA0JKS220( )
200 2000
33 5 5 38 0.24 0.45 2.0 5.0 2.5
ECEA0JKS330( )
200 2000
47 5 5 46 0.24 0.45 2.0 5.0 2.5
ECEA0JKS470( )
200 2000
100 6.3 5 71 0.24 0.45 2.5 5.0 2.5
ECEA0JKS101( )
200 2000
330 851300.240.452.5 2.5
ECEA0JKS331( )
200 1000
851300.240.45 5.0
ECEA0JKS331Q
1000
10
22 5 5 35 0.20 0.45 2.0 5.0 2.5
ECEA1AKS220( )
200 2000
33 5 5 43 0.20 0.45 2.0 5.0 2.5
ECEA1AKS330( )
200 2000
47 6.3 5 65 0.20 0.45 2.5 5.0 2.5
ECEA1AKS470( )
200 2000
100 6.3 5 80 0.20 0.45 2.5 5.0 2.5
ECEA1AKS101( )
200 2000
220 851200.200.452.5 2.5
ECEA1AKS221( )
200 1000
851200.200.45 5.0
ECEA1AKS221Q
1000
16
10 4 5 28 0.16 0.45 1.5 5.0 2.5
ECEA1CKS100( )
200 2000
22 5 5 39 0.16 0.45 2.0 5.0 2.5
ECEA1CKS220( )
200 2000
33 6.3 5 60 0.16 0.45 2.5 5.0 2.5
ECEA1CKS330( )
200 2000
47 6.3 5 70 0.16 0.45 2.5 5.0 2.5
ECEA1CKS470( )
200 2000
100 8 5 91 0.16 0.45 2.5 2.5
ECEA1CKS101( )
200 1000
8 5 91 0.16 0.45 5.0
ECEA1CKS101Q
1000
25
4.7 4 5 22 0.14 0.45 1.5 5.0 2.5
ECEA1EKS4R7( )
200 2000
10 5 5 28 0.14 0.45 2.0 5.0 2.5
ECEA1EKS100( )
200 2000
22 6.3 5 55 0.14 0.45 2.5 5.0 2.5
ECEA1EKS220( )
200 2000
33 6.3 5 65 0.14 0.45 2.5 5.0 2.5
ECEA1EKS330( )
200 2000
100 8 5 85 0.14 0.45 2.5 2.5
ECEA1EKS101( )
200 1000
8 5 85 0.14 0.45 5.0
ECEA1EKS101Q
1000
35
3.3 4 5 16 0.12 0.45 1.5 5.0 2.5
ECEA1VKS3R3( )
200 2000
4.7 4 5 22 0.12 0.45 1.5 5.0 2.5
ECEA1VKS4R7( )
200 2000
10 5 5 30 0.12 0.45 2.0 5.0 2.5
ECEA1VKS100( )
200 2000
22 6.3 5 60 0.12 0.45 2.5 5.0 2.5
ECEA1VKS220( )
200 2000
33 8 5 65 0.12 0.45 2.5 2.5
ECEA1VKS330( )
200 1000
8 5 65 0.12 0.45 5.0
ECEA1VKS330Q
1000
47 8 5 85 0.12 0.45 2.5 2.5
ECEA1VKS470( )
200 1000
8 5 85 0.12 0.45 5.0
ECEA1VKS470Q
1000
50
0.1 4 5 1 0.10 0.45 1.5 5.0 2.5
ECEA1HKS0R1( )✽✽✽
200 2000
0.22 4 5 2 0.10 0.45 1.5 5.0 2.5
ECEA1HKSR22( )✽✽✽
200 2000
0.33 4 5 3 0.10 0.45 1.5 5.0 2.5
ECEA1HKSR33( )✽✽✽
200 2000
0.47 4 5 5 0.10 0.45 1.5 5.0 2.5
ECEA1HKSR47( )✽✽✽
200 2000
1 4 5 10 0.10 0.45 1.5 5.0 2.5
ECEA1HKS010( )✽✽✽
200 2000
2.2 4 5 16 0.10 0.45 1.5 5.0 2.5
ECEA1HKS2R2( )
200 2000
3.3 4 5 16 0.10 0.45 1.5 5.0 2.5
ECEA1HKS3R3( )
200 2000
4.7 5 5 23 0.10 0.45 2.0 5.0 2.5
ECEA1HKS4R7( )
200 2000
10 6.3 5 35 0.10 0.45 2.5 5.0 2.5
ECEA1HKS100( )
200 2000
22 8 5 60 0.10 0.45 2.5 2.5
ECEA1HKS220( )
200 1000
8 5 60 0.10 0.45 5.0
ECEA1HKS220Q
1000
· When requesting taped product, please put the letter "B" or "i" be tween the "( )". Lead wire pitch ✽B=5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
Endurance : 85 °C 1000 h
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ KS-(Bi-polar)
– EEE-125 –
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L±1.0
fd±0.05
Radial Lead Type
Series: KS(Bi-polar) Type: A
■ Speci cations
Category Temp. Range –40 °C to +85 °C
Rated W.V. Range 63 V.DC to 50 V.DC
Nominal Cap. Range 2.2 μF to 47 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.05 CV or 10 (μA) After 2 minutes (Whichever is greater)
tan dPlease see the attached standard products list
Endurance
After 1000 hours application of DC working voltage (500 hours for each polarity) at +85 °C±2 °C,
when the capacitors are restored to 20 °C, the capacitors shall meet the following limits.
Capacitance change ± 20% of initial measured value
tan d<200 % of initial specifi ed value
DC leakage current <initial specifi ed value
Shelf Life After storage for 1000 hours at +85 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance (With voltage treatment)
■ Features
● Endurance : 85° C 1000 h
● 5 mm height
● RoHS directive compliant
Body Dia. 0D4 5 6.3
Lead Dia. 0d 0.45 0.45 0.45
Lead space F 1.5 2.0 2.5
Frequency (Hz)
50, 60 120 1 k 10 k to
Correction factor 0.70 1.00 1.30 1.70
■ Frequency correction factor for ripple current
■ Di men sions in mm (not to scale) (Unit : mm)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ KS-(Bi-polar)
– EEE-126 –
■ Standard Prod ucts (Bi-polar)
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+85 °C
)
tan d
(120 Hz)
(+20 °C)
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽i
(V) (μF) (mm) (mm)
(mA r.m.s.)
(mm) (mm) (mm) (mm) (pcs) (pcs)
6.3
22 5 5 29 0.24 0.45 2.0 5.0 2.5
ECEA0JSN220( )
200 2000
33 6.3 5 38 0.24 0.45 2.5 5.0 2.5
ECEA0JSN330( )
200 2000
47 6.3 5 46 0.24 0.45 2.5 5.0 2.5
ECEA0JSN470( )
200 2000
10
10 4 5 25 0.20 0.45 1.5 5.0 2.5
ECEA1ASN100( )
200 2000
22 6.3 5 35 0.20 0.45 2.5 5.0 2.5
ECEA1ASN220( )
200 2000
33 6.3 5 43 0.20 0.45 2.5 5.0 2.5
ECEA1ASN330( )
200 2000
16
4.7 4 5 20 0.20 0.45 1.5 5.0 2.5
ECEA1CSN4R7( )
200 2000
10 5 5 25 0.20 0.45 2.0 5.0 2.5
ECEA1CSN100( )
200 2000
22 6.3 5 39 0.20 0.45 2.5 5.0 2.5
ECEA1CSN220( )
200 2000
25
3.3 5 5 18 0.20 0.45 2.0 5.0 2.5
ECEA1ESN3R3( )
200 2000
4.7 5 5 21 0.20 0.45 2.0 5.0 2.5
ECEA1ESN4R7( )
200 2000
10 6.3 5 28 0.20 0.45 2.5 5.0 2.5
ECEA1ESN100( )
200 2000
35 2.2 4 5 12 0.20 0.45 1.5 5.0 2.5
ECEA1VSN2R2( )
200 2000
50
0.1 4 5 1 0.20 0.45 1.5 5.0 2.5
ECEA1HSN0R1( )✽✽✽
200 2000
0.22 4 5 2 0.20 0.45 1.5 5.0 2.5
ECEA1HSNR22( )✽✽✽
200 2000
0.33 4 5 3 0.20 0.45 1.5 5.0 2.5
ECEA1HSNR33( )✽✽✽
200 2000
0.47 4 5 5 0.20 0.45 1.5 5.0 2.5
ECEA1HSNR47( )✽✽✽
200 2000
1 4 5 10 0.20 0.45 1.5 5.0 2.5
ECEA1HSN010( )✽✽✽
200 2000
2.2 5 5 16 0.20 0.45 2.0 5.0 2.5
ECEA1HSN2R2( )
200 2000
· When requesting taped product, please put the letter "B" or "i" be tween the "( )". Lead wire pitch ✽B=5 mm, i=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
Endurance : 85 °C 1000 h (500hours for each polarity)
02 May. 2014
Aluminum Electrolytic Capacitors
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-166 –
Notices
Applicable laws and regulations
This product satisfies the requirements of the RoHS Directive (2011/65/EU) (related to the specified hazardous
substances contained in electrical and electronic equipment).
The ozone-depleting chemicals regulated by the Montreal Protocol are not intentionally used in the materials used in
our manufacturing processes.
PBBs(Poly-Brominated Biphenyls)/PBDEs (Poly-Brominated Diphenyl ethers)
The above specifi ed brominated fl ame retardants are not intentionally used.
When exporting this product, observe the export procedures specifi ed in export control laws such as the Foreign
Exchange and Foreign Trade Control Law.
Limited applications
This product is intended to be used for general-purpose standard applications for general electronic equipment
(such as AV equipment, household appliances, business or office equipment, information or communications
equipment, etc.)
If this product is being examined for possible use in applications where higher reliability or safety is required, in
cases where a malfunction of this product may endanger life or property, then the delivery specifi cations meeting
the application requirements must be agreed to and exchanged.
Items to be observed
(1) The purpose of these specifi cations is to ensure the quality of components as individual components.
Before use, check and evaluate their operation when mounted on your products.
(2) Do not use our components outside of the corresponding specifi cations.
When using this capacitor in a prod uct where safety is crit i cal
We take great care in the quality of this product. However, performance may deteriorate and short-circuiting
or open-circuiting may occur if it will be used in transportation equipment (e.g. trains, cars, traffi c lights),
medical equipment, airborne equipment, aerospace equipment, electric heating appliances, combustion/
gas equipment, rotating equipment, disaster/crime prevention equipment, or other equipment where a
defect in this component may cause the loss of human life or other signifi cant damage. Ensure that the
target equipment has a failsafe design and is provided with the following systems to guarantee adequate
safety.
(1) * Ensure the safety of the whole system by installing a protection circuit and a protection device.
(2) Redundant circuits, etc. to maintain the safety of the entire system so that a single independent failure
will not lead to unsafe conditions.
Conditions of use
This product is intended to be used in electronic equipment for general-purpose standard applications and is
not designed for use in any special environments.
When this capacitor is used in a special environment or under special conditions, its performance may be
affected. Before use, verify the performance and reliability of the capacitor.
03 May. 2014
Aluminum Electrolytic Capacitors
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-167 –
Application Guidelines
1. Circuit design
Verify the usage and fitting environments and make sure to observe the rated performance specified in the
corresponding catalog or specifi cations.
1.1 Operating temperature and frequency
Variations in temperature and frequency can affect the electrical characteristics of capacitors. Design circuits allowing
for these variations.
(1) At high temperatures leakage current increases.
(2) At low temperatures the capacitance decreases and an increase in the tangent of the loss angle and impedance.
(3) As frequency increases, capacitance decreases and the tangent of the loss angle increases, while the capacitive
portion of impedance decreases till the resonant frequency is reached.
(4) At low frequency there is temperature rise caused by ripple currents accompanying the increase in equivalent
series resistance.
1.2 Operating temperature and life expectancy
(1) The capacitor life is affected by usage temperature.
In general, the capacitor life is approximately doubled when the temperature decreases by 10 °C.
Reduce the usage temperature as much as possible.
(2) The use of capacitors beyond the upper category temperatures may cause rapid deterioration in the characteristics
and break down may occur.
The temperature referred to here includes the ambient temperature(within equipment), including heat produced by
heat generating devices (power transistors, resistors, etc.), self-heating due to ripple currents, etc. Take these
factors into consideration when checking the temperature of capacitors.
Do not place any heat generating devices, etc. on the back of capacitors.
(3) The life acceleration can be calculated with the following equation:
T1–T2
10
L2 = L1×2
L1 : Life at a temperature T1 °C (h)
L2 : Life at a temperature T2 °C (h)
T1 : Category upper limit temperature + heat generation due to ripple currents (°C)
T2 : Ambient temperature to calculate the life + heat generation due to ripple currents (°C)
1.3 Common application conditions to avoid
If the loads shown below are applied to a capacitor, then its characteristics may degrade rapidly or it may short-circuit.
Rapid heat or gas generation may occur, which leads to the activation of the pressure valve. Electrolytes will then leak
from the sealing section. In the worst case, an explosion or ignition may occur.
When the capacitor breaks down, combustible materials (electrolytes, element fi xing materials, etc.) may fl ow externally
in all directions.
(1) Polarity
Aluminum electrolytic capacitors have polarities.
Do not apply a reversed or alternating-current voltage.
If the polarity is reversed, then short-circuiting may occur in the initial state or the pressure valve may be activated,
leading to capacitor breakdown.
Check the polarity when using a polar capacitor.
If the polarity is unstable or unclear in a circuit, then use bipolar capacitors. However, bipolar capacitors cannot be
used in alternating current circuits.
(2) Applied voltage
Do not apply an excessive voltage (voltage exceeding the rating).
The peak direct current voltage superposed with a ripple voltage (alternating current component) must be equal to
or less than the rated voltage. A surge voltage exceeding the rated voltage is allowed and specifi ed. However, the
allowable conditions are limited and the specifi cations do not guarantee the application of such a surge voltage for
a long time.
(3) Ripple current
Do not allow an excessive current (current exceeding the rated ripple current) to pass.
If an excessive ripple current passes through, then the amount of internally generated heat will grow, the capacitor
life will be reduced, or the pressure valve will be activated, leading to breakdown.
Even if the current is equivalent to or less than the allowable level, a reversed voltage may be applied when a direct
current bias voltage is low.
Use capacitors so that a reversed voltage is not applied.
03 May. 2014
Aluminum Electrolytic Capacitors
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-168 –
(4) Charging/discharging applications
Standard capacitors are not suitable for use in repeating charge/discharge applications. For charge/discharge
applications, consult us with your actual application condition.
For rush current, please to nor exceed 100 A.
(5) ON-OFF circuit
Do not use capacitors in circuit where ON-OFF switching is repeated more than 10000 times/per day.
In case of applying to the theses ON-OFF circuit, consult with us about circuit condition and so on.
(6) Series/parallel connection
[Parallel connection]
If capacitors are connected in parallel, then the balance of currents between these capacitors may be disrupted
and an excessive ripple current may pass through only part of these capacitors.
Wire your circuits such that excessive ripple current does not pass through the capacitors.
[Series connection]
If capacitors are connected in series, then the balance of voltages between these capacitors may be disrupted and
excessive voltage may be applied. Add a bleeder resistor in parallel with each capacitor. By taking leak currents
into consideration the balance of voltages will not be disrupted.
(7) Electrical isolation of the capacitors
Isolate capacitors completely in a circuit in the following cases.
Between the housing and cathode and anode terminals and between circuit traces.
(8) Capacitor sleeve
Exterior sleeves or lamination covering capacitors are for indication purposes only and do not guarantee electrical
insulation.
1.4 Capacitor mounting considerations
For aluminum electrolytic capacitors, conductive electrolysis whose main solvent is combustible organic solvent and
combustible electrolytic paper is used.
If the electrolysis leaks onto a printed circuit board, then it may corrode or short-circuit the traces, leading to smoke or
fi re. Check the following points when designing products.
(1) Double-sided circuit board
If capacitors are used in double-sided boards, then do not lay wiring traces immediately below the capacitors.
If the sealed part of a capacitor adheres to the surface of a through-hole printed circuit board, then the solder may
be absorbed into the gap during dip soldering and the anode and cathode terminals may be short-circuited.
(2) Circuit board hole positioning
Solder may protrude from the through-holes or holes for post-mounted component leads and damage the capacitor
exterior sleeves. Be mindful of the hole positions.
(3) Circuit board hole spacing
Make holes for capacitors with a gap equivalent to that of capacitor leads (terminals) during design. Otherwise,
there will be stress on the capacitor leads when they are inserted into these holes, leading to current leaks,
short-circuiting, or electrolysis leakage.
(4) Surface-mount types
For surface-mount type capacitors, design land traces with reference to the recommended board land sizes
described in the delivery specifi cations, etc.
(5) Capacitors equipped with pressure valves
Provide a space above the pressure valve so that it can operate properly.
For capacitors equipped with a pressure valve (as per the shape and dimensional descriptions of each series),
provide a space as follows. If the space is smaller than the requirements, then the pressure valve may not operate
properly, leading to an explosion.
Product diameter Space
06.3 to 016 mm 2 mm or more
018 to
035 mm 3 mm or more
040 mm or more 5 mm or more
(6) Clearance for seal mounted pressure relief vents
When the pressure valve section of a capacitor faces the printed wiring, provide a degassing hole aligned with the
pressure valve position for proper operation of the valve.
(7) Wiring near the pressure relief vent.
Considerations must be taken in designing circuits so that there are no traces, particularly for high-voltage or large-
current wiring, above the pressure valve sections.
When a pressure valve is activated, combustible high-temperature gas exceeding 100°C will be released. Gas may
condense or the wiring covers may melt and secondary accidents may occur.
(8) Circuit board patterns under the capacitor.
If electrolysis leaks, then the circuit traces may short-circuit and tracking or migration may occur.
03 May. 2014
Aluminum Electrolytic Capacitors
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-169 –
2. Mounting
2.1 Considerations before using
(1) Do not reuse capacitors that have been installed and energized.
(2) Capacitors may generate transient recovery voltages. In this case, discharge them using a resistor of approx. 1 kΩ.
(3) Capacitors stored for a long time may have a larger current leak.
In this case, dispose the voltage using a resistor of approx. 1 kΩ.
(4) Do not drop capacitors onto a fl oor, etc.
Do not use dropped capacitors because they may be damaged mechanically or electrically.
(5) Do not use corrupted capacitors.
If a capacitor s seal is deteriorated, then its performance will be degraded, life reduced, and/or the electrolyte
will leak.
2.2 Capacitor insertion
(1) Check the capacitor ratings (capacitance and voltage) before mounting.
(2) Check the capacitor polarity before mounting.
(3) Check the capacitor lead and hole intervals and land size before mounting.
If these intervals are different, then stress will be applied to the inside of the capacitor through its leads when they
are inserted into the board holes, leading to short-circuiting or other failures.
(4) When an automatic mounter is used, the force to clinch and fi x capacitor leads must not be excessive.
When capacitor leads are clinched and fi xed onto a circuit board, the leads may be pulled and a large force applied
to the capacitor if there are missing cogs or the gap between the clinching section and the circuit board is too small.
If this is the case, then the capacitor may break down.
For surface-mount type capacitors, if the mounting pressure is excessive, then current leaks may increase,
short-circuiting may occur, or the capacitor may break down and come off.
2.3 Manual soldering
(1) Solder capacitors under the soldering conditions (temperature and time) as described in the specifi cations or at
350 °C for three seconds or less.
(2) If the capacitor lead terminals must be pre-processed in order to align the gaps between the terminals and holes,
place them before soldering to prevent stress from being applied to the capacitor body.
(3) If it is necessary to manually remove soldered capacitors, repair them after the solder has suffi ciently melted to
prevent stress from being applied to the capacitor terminals.
(4) Do not touch the capacitor body with the soldering iron tip. Otherwise, a hole may occur on the capacitor exterior
sleeve. The sleeve may break or become damaged.
2.4 Flow soldering
(1) Do not immerse the capacitor body in a solder bath. The capacitor’s inner pressure could increase and the capacitor
will break down.
(2) Solder capacitors under the soldering conditions (temperature and time) described in the specifi cations.
(3) When soldering, do not allow other components to fall or touch the capacitors.
When soldering, if resistors, ceramic capacitors, or other components (with a high heat conductance) fall and their
lead terminals or metallic sections touch the capacitor, then local thermal stress can occur causing the capacitor’s
exterior sleeve to break down. This phenomenon is identical to short-circuiting.
(4) Prevent fl ux from adhering to anything other than the terminals.
2.5 Re ow soldering for chip capacitors
(1) Surface-mount type capacitor are exclusively for refl ow soldering. When refl ow solder is used an ambient heat condition
system such as the simultaneous use of infrared and hot-air is recommended.
✽ This system cannot be used for fl ow or dip soldering.
(2) Soldering capacitors under the soldering conditions (pre-heating, soldering temperature and time) described in the
specifi cations.
(3) Refl ow-solder only once.
If you need to apply refl ow soldering twice, then make sure to contact us.
(4) Do not reuse the installed surface-mount type capacitors.
(5) The crack on top marking might be occurred by refl ow heat stress.
But please acknowledge that it does not infl uence the reliability of the product.
(6) VPS (Vapor Phase Soldering) refl ow can cause signifi cant characteristics change and/ or mounting failure due to
deformation by acute temperature rise. VPS is acceptable provided that the process does not exceed recommended
refl ow profi le and temperature rise is less than 3degC/sec. Please contact Panasonic for detailed conditions.
2.6 Other soldering considerations
If the chip capacitor temperature becomes very high due to pre-heating or hardening of the fi xing resin, then the
capacitor exterior sleeve may shrink or crack. If capacitors are passed through a heat-curing furnace, then the ambient
temperature must be 150°C or less and the duration must be two minutes or less.
2.7 Capacitor handling after soldering
(1) Do not tilt, bring down, or twist the capacitors soldered to the printed circuit board; otherwise a torque will be generated
with the capacitor circumference as the fulcrum. As a result, a large force will be applied to the inside of the ele-
ment through the terminals and the capacitor may break down.
(2) Do not hold the capacitors soldered to the printed circuit board to carry the board; otherwise the board s entire
weight will be applied to the inside of the element through the terminals and the capacitor may break down.
(3) Do not hit the capacitors soldered to the printed circuit board with foreign objects. When stacking printed circuit
boards, do not hit the capacitors with circuit boards or other components (terminals, etc.)
03 May. 2014
Aluminum Electrolytic Capacitors
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-170 –
2.8 Circuit board cleaning
(1) Apply the following conditions to fl ux cleaning after soldering
Temperature: 60°C or less, duration: Five minutes or less (Ultrasonic waves may be used.)
However, rinse suffi ciently and dry the boards (at 100°C for 20 minutes or less).
[Applicable solvents]
Pine Alpha ST-100S
Clean-thru 750H, 750L, or 710M
Aqua Cleaner 210SEP
Sunelec B-12
DK Beclear CW-5790
Techno Cleaner 219
Cold Cleaner P3-375
Telpen Cleaner EC-7R
Techno Care FRW-17, FRW-1, or FRV-1
Isopropyl alcohol (IPA)
Remarks
1 : If you wish to use solvents other than the above or Deionized water, please contact us.
2 : Please do not use ozone-depleting chemicals in order to protect the environment.
3 : Depending on the cleaning method, the marking on a capacitor may be erased or blurred.
(2) Avoid using the following solvent groups unless speci cally allowed for in the speci cation
(a) Halogen solvents: Corrode the inside capacitors.
The solvent may enter (diffuse) inside the capacitor, decompose and cause a reaction. Then, the released chlorine
ions may react with the aluminum and corrode it.
For capacitors for which we guarantee cleaning, use solvents under the cleaning conditions (temperature, time,
etc.) described in the specifi cations.
(b) Alkaline solvents: Corrode (melt) aluminum housings.
(c) Petroleum solvents: Deteriorate sealing rubber.
(d) Xylene solvents: Deteriorate sealing rubber.
(e) Acetone: Erases indications.
(3) Be sure to dry the printed circuit boards immediately after cleaning so that the solvent does not remain between the
capacitor’s sealed section and the circuit board.
(4) Manage the contamination of solvents (conductance, PH, specifi c gravity, amount of water, etc.)
If the solvent is contaminated, then the chlorine concentration will become high and the inside capacitor may be
corroded. Control the fl ux concentration against the solvent to 2 %wt or less.
2.9 Mounting adhesives and coating agents
(1) If bond or coating agents are used to fi x capacitors or prevent moisture, then solvents contained in these materials
may corrode the capacitors. Select solvents other than halogen compounds. Do not use chloroprene-derived
polymers.
Also, if the bond and coating material containing organic solvents, such as xylene and toluene, are used, resin of
the top plate of a snap-in terminal type capacitor will be dissolved.
In this case please select part number without the top plate.
(2) If fi xing or coating agents are used for capacitors, then check the following points.
(a) Do not allow fl ux residue or contaminants to remain between the capacitor’s sealed section and the circuit board.
(b) Harden and dry bond or coating agents so that the solvents do not remain. Do not completely block the sealed
section of a capacitor. (At least 1/3 of the sealed section must be exposed.)
2.10 Fumigation process
When electronic equipment incorporating aluminum electrolytic capacitors is exported, wooden packing materials may
be fumigated using halogen compounds such as bromomethane. If drying after the fumigation process is insuffi cient,
halogen remaining in the packing materials may be released, enter and corrode the capacitors.
If the fumigation process is carried out, then check carefully for remaining halogen after processing and drying.
Make sure not to apply the fumigation process to completely packed electronic equipment.
3. Precautions for using capacitors
3.1 Environmental Conditions
Capacitors should not be stored or used in the following environments.
(1) Exposure to temperatures above the upper category or below the lower category temperature of the capacitor.
(2) Direct contact with water, salt water, or oil.
(3) High humidity conditions where water could condense on the capacitor.
(4) Exposure to toxic gases such as hydrogen sulfi de, sulfuric acid, nitric acid, chlorine, Chlorine compound, Bromine,
Bromine compound or ammonia.
(5) Exposure to ozone, radiation, or ultraviolet rays.
(6) Vibration and shock conditions exceeding specifi ed requirements.
03 May. 2014
AluminumElectrolytic Capacitors
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-171 –
3.2 Electrical Precautions
(1) Do not touch the capacitor terminals directly.
If you touch the capacitor terminals, you will receive an electric shock. Do not touch the exposed aluminum sections
of a capacitor, such as the pressure valve sections because they are not insulated.
(2) Do not short-circuit the capacitor terminals.
Do not spill conductive solutions such as acidic or alkaline solutions on the capacitors. Otherwise, short-circuiting
will occur. The circuit will malfunction and the capacitors break down.
(3) A low-molecular-weight-siloxane which is included in a silicon material shall causes abnormal electrical characteristics.
4. Precautions for checks and maintenance
(1) Periodically check the capacitors used in industrial equipment. When checking and maintaining capacitors, turn off the
equipment and discharge the capacitors beforehand. In this case, do not apply stress to the capacitor lead terminals,
etc.
(2) Periodically check the following items.
(a) Signifi cant appearance abnormalities (deformation, electrolysis leakage, etc.)
(b) Electrical characteristics (described in the corresponding catalog or delivery specifi cations)
If any abnormalities are found, then replace the capacitors or take appropriate actions.
5. Emergency procedures
(1) Capacitors of a certain size or larger are equipped with a pressure valve to release excessive pressure.
If the capacitor pressure valve is activated and gas becomes visible when using equipment, then turn off the
equipment or unplug it. If the power is not turned off, then the short-circuited capacitors may damage the circuit or the
gas may become liquefi ed and cause a short-circuit. In the worst case, secondary disasters such as equipment
damage may occur.
Gases released from the capacitor s pressure valve is not fume but liquefi ed electrolysis.
(2) When a pressure valve is activated, a high-temperature gas exceeding 100 °C will be released. Do not place your face
close to the capacitor.
If the gas gets into your eyes or you inhale it, then immediately wash your eyes with water or gargle. If the gas comes
in contact with your skin, then wash it with soap.
6. Long Term Storage
(1) Leakage current of a capacitor increases with long storage times. The aluminum oxide fi lm deteriorates as a function
of temperature and time.
If used without reconditioning, an abnormally high current will be required to restore the oxide fi lm.
This surge current could cause the circuit or the capacitor to fail.
Storage period is one year. When storage period is over 12 months, a capacitor should be reconditioned by applying
the rated voltage in series with a 1000 Ω current limiting resistor for a time period of 30 minutes.
For storage condition, keep room temperature (5 °C to 35 °C) and humidity (45% to 85%) where direct sunshine doesn’t
reach.
(2) Environmental Conditions
(a) Exposure to temperatures above the upper category or below the lower category temperature of the capacitor.
(b) Direct contact with water, salt water, or oil
(c) High humidity conditions where water could condense on the capacitor.
(d) Exposure to toxic gases such as hydrogen sulfi de, sulfuric acid, nitric acid, chlorine, Chlorine compound, Bromine,
Bromine compound or ammonia.
(e) Exposure to ozone, radiation, or ultraviolet rays.
(f) Vibration and shock conditions exceeding specifi ed requirements.
7. Discarding
When discarding capacitors, use either of the following procedures.
(1) Make holes on the capacitor or break it up completely.
Then burn it at a temperature of 800°C or higher.
If capacitors are burnt as is, then they may explode.
(2) If you do not burn them, then ask professional waste disposer.
The precautions in using aluminum electrolytic capacitors follow the Precautionary Guidelines for the Use of Fixed
Aluminum Electrolytic Capacitors for Electronic equipment, RCR-2367B issued by EIAJ in March 2002.
Please refer to the above guidelines for details.
03 May. 2014
* Intellectual property right
We, Panasonic Group are providing the product and service that customers can use without anxiety, and are working
positively on the protection of our products under intellectual property rights.
Representative patents relating to Conductive Polymer Hybrid Aluminum Electrolytic Capacitors are as follows :
US Patent Nos. 7497879 and 7621970 JP Patent No. 5360250
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors
– EEE-175 –
6.35±1.0
f4.0±0.2
1.01.0
0.6±0.3
9.0±0.5
F
P1
18.0±0.5
0 to 1.5
6.0
12.7±1.0
fd
fD
L
12.7±0.2
16.0±0.5
–0.20
17.50+0.75
6.35±1.0
04.0±0.2
1.01.0
9.0±0.5
–0.50
18.50+0.75
F
P1
18.0±0.5
0 to 1.5
6.0
12.7±1.0
0d
12.7±0.2
fD
L
0.6±0.3
12.7±0.2
f4.0±0.2
6.35±1.0
F
P1
12.7±1.0
fd
fD
L
18.0±0.5
0 to 1.5
6.0
9.0±0.5
18.50+0.75
–0.50
1.01.0
0.6±0.3
■ Lead Taping Radial Lead Type
● Dimensions in mm (not to scale)
Lead space
(F)
Case size
2.5 mm 5.0 mm 7.5 mm
04 × 5L B A
05 × 5L B A
06.3 × 5L C A
08 × 5L C E
04 × 7L B A
05 × 7L B A
06.3 × 7L C A
08 × 7L C E
05 × 11L C D
06.3 × 11.2L, 15L C D
08 × 11.5L, 15L, 20L E
010 × 12.5L, 16L, 20L, 25L F
012.5 × 15L, 20L, 25L G
016 × 15L, 20L, 25L H
018 × 15L, 20L, 25L H
■ Figure A (Lead space: 5.0 mm / 0D×L : 04×5, 7, 05×5, 7, 06.3×5, 7)
■ Figure B (Lead space: 2.5 mm / 0D×L : 04×5, 7, 05×5, 7)
■ Figure C (Lead space: 2.5 mm / 0D×L : 05×11, 06.3×5, 7, 11.2, 15, 08×5, 7)
(Unit : mm)
Di men sions Nominal Tolerance
0d 0.45 ±0.05
F 2.5 ±0.5
P1 5.1 ±0.5
(Unit : mm)
Di men sions Nominal Tolerance
0d
0.45(5×11, 6.3×11.2, 15 : 0.50)
±0.05
F 2.5 ±0.5
P1 5.1 ±0.5
(Unit : mm)
Di men sions Nominal Tolerance
0d 0.45 ±0.05
F 5.0 +0.8
P1 3.85 ±0.50
–0.2
05 Mar. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors
– EEE-176 –
6.35±1.0
f4.0±0.2
1.01.0
9.0±0.5
16.0±0.5
F
P1
18.0±0.5
0 to 1.5
6.0
12.7±1.0
fd
–0.50
18.50+0.75
12.7±0.2
fD
L
0.6±0.3
6.35±1.0
f4.0±0.2
1.01.0
9.0±0.5
16.0±0.5
F
P1
18.0±0.5
0 to 1.5
6.0
12.7±1.0
fd
H
12.7±0.2
fD
L
0.6±0.3
12.7±0.2
f4.0±0.2
6.35±1.0
F
P1
12.7±1.0
fd
18.0±0.5
0 to 1.5
6.0
9.0±0.5
18.50+0.75
–0.50
1.01.0
fD
L
0.6±0.3
15.0±0.2
f4.0±0.2
7.5±1.0
F
P1
15.0±1.0
fd
18.0±0.5
0 to 1.5
6.0
9.0±0.5
18.50+0.75
–0.50
1.01.0
fD
L
0.6±0.3
■ Figure D (Lead space: 5 mm / 0D×L : 05×11, 06.3×11.2, 15)
Di men sions Nominal Tolerance
0d 0.50 ±0.05
F 5.0 +0.8
P1 3.85 ±0.50
(Unit : mm)
■ Figure E (Lead space: 5 mm / 0D×L : 08×5, 7, 11.5, 15, 20)
Di men sions Nominal
Tolerance
08×11.5 to 20
08×5, 7
Suffi x code B BQ
0d 0.60 0.45 ±0.05
F 5.0 +0.8
P1 3.85 ±0.50
H 20.00 18.50 +0.75
(Unit : mm)
■ Figure F (Lead space: 5 mm / 0D×L : 010×12.5, 16, 20, 25)
(Unit : mm)
■ Figure G (Lead space: 5 mm / 0D×L : 012.5×15, 20, 25)
(Unit : mm)
–0.2
–0.2
–0.50
Di men sions Nominal Tolerance
0d 0.60 ±0.05
F 5.0 +0.8
P1 3.85 ±0.50
–0.2
Di men sions Nominal Tolerance
0d 0.60 ±0.05
F 5.0 +0.8
P1 5.0 ±0.5
–0.2
05 Mar. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors
– EEE-177 –
fd
0.6±0.3
7.5±1.0 30.0±1.0
P1 F
2.02.0
15.0±0.2
L
fD
18.0±0.5
0 to 1.5
6.0
f4.0±0.2
1.31.3
9.0±0.5
18.50+0.75
–0.50
c
a
b
■ Figure H (Lead space: 7.5 mm / 0D×L : 016×15, 20, 25, 018×15, 20, 25)
(Unit : mm)
Di men sions Nominal Tolerance
0d 0.80 ±0.05
F 7.5 ±0.5
P1 3.75 ±0.50
■ Packaging Speci cations
(Unit : mm)
Dimensions (mm)
Dimensions of Outer Carton Box
04 to 0506.3 08010, 012.5 016, 018
a 340 max. 340 max. 340 max. 340 max. 340 max.
b to 55 max. to 55 max. to 55 max. 55 to 66 max. 62 to 75 max.
c 170 to 210 max. 270 max. 230 max. 170 to 270 max. 225 to 310 max.
Packaging Quan ti ty 2000 pcs. 2000 pcs. 1000 pcs. 500 pcs. 250 pcs.
05 Mar. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors
– EEE-178 –
P
H3
F
0d
H1
H2
E
=
F
0d
H1
H2
PE
=
■ Di men sions in mm (not to scale)
Lead Forming Type (Snap-in)
Lead formed Aluminium Electrolytic Capacitor for self mounting, for rationalization and upgrade of soldering process.
04, 05, 06.3, 08
010, 012.5, 016, 018
✽ Direction of bending shape is not specifi ed
Dia 0D H1±0.5 H2 H3 F±0.5 P E max. 0dfor PWB
hole dia. 0thick ness
5 4.5 2.7 2.5 5.0 1.0 1.0 0.5 0.9 1.6
6.3 4.5 2.7 2.5 5.0 1.0 1.0 0.5 1.0 1.6
8 4.5 2.7 2.5 5.0 1.0 1.0 0.6 1.0 1.6
10 4.5 2.7 5.0 1.0 1.0 0.6 1.0 1.6
12.5 4.5 2.7 5.0 1.0/0.9 1.0 0.6/0.8 1.0 /1.1 1.6
16 4.5 2.7 7.5 0.9 1.0 0.8 1.1 1.6
18 4.5 2.7 7.5 0.9 1.0 0.8 1.1 1.6
■ Series KA/KS Dimensions in mm (not to scale)
Dia 0D H1±0.5 H2 H3±0.3 F±0.5 P E max. 0dfor PWB
hole dia. 0thick ness
4 4.5 2.7 1.5 5.0 0.95 1.0 0.45 0.9 1.6
5 4.5 2.7 1.5 5.0 0.95 1.0 0.45 0.9 1.6
6.3 4.5 2.7 1.5 5.0 0.95 1.0 0.45 0.9 1.6
8 4.5 2.7 1.5 5.0 0.95 1.0 0.45 0.9 1.6
(Unit : mm)
(Unit : mm)
05 Mar. 2014
– EE8 –
Discontinued Series (not recommended for new design)
Check Panasonic website for discontinued / revised product series speci cation.
http://panasonic.net/id/
Aluminum Electrolytic Capacitors (Radial Lead Type)
Discontinued Product Replacement
Series Part No. Endurance Features Rated.W.V.
(V)
Capacitance
(μF) Series Endurance
S SW
S
(High voltage)
ECEA--S----- + 85 °C 1000 h Standard 10 to 50 1 to 100 M + 85 °C 2000 h
S Bi-polar ECEA--N----S + 85 °C 2000 h Bi-polar Standard 4 to 100 0.1 to 1000 SU-BP + 85 °C 2000 h
SU ECEA--U----- + 85 °C 2000 h Standard 6.3 to 450 0.1 to 15000 M + 85 °C 2000 h
K ECEA--K----- + 85 °C 1000 h Height 7 mm 6.3 to 50 0.1 to 100 KA + 85 °C 1000 h
KS(03) ECEA--KK---- + 85 °C 1000 h
Height 5 mm 03×5
4 to 50 0.1 to 22 Available upon request
KG ECEA--KG----- +105 °C 1000 h Height 7 mm 6.3 to 50 0.1 to 220 GA +105 °C 1000 h
SS ECEA--SS--- + 85 °C 2000 h Low profi le 6.3 to 50 3.3 to 4700 Available upon request
Z ECEA--Z---- + 85 °C 2000 h Low impedance 6.3 to 50 0.1 to 2200
FC
+105 °C
1000 to 5000 h
HF ECEA--F---- +105 °C 2000 h Low impedance 10 to 63 22 to 2200
HFS ECEA--FS---
+105 °C 1000 to 2000 h
Low impedance 6.3 to 63 0.47 to 4700
HFE ECEA--FE--- +105 °C 2000 h Low impedance 6.3 to 100 3.3 to 15000
HFG ECA--FG----
+105 °C 2000 to 5000 h
Low impedance 6.3 to 63 0.1 to 15000
HFQ ECA--FQ----
+105 °C 1000 to 2000 h
Low impedance 6.3 to 63 6.8 to 15000
HFZ ECA--FZ---- +105 °C 5000 h Low impedance 6.3 to 35 56 to 5600
KF ECA--KF---- +105 °C 1000 h
Height 7 mm, Low impedance
6.3 to 35 1 to 120
ESM ECEA--E---M + 85 °C 2000 h Low impedance 10 to 50 0.1 to 220
FA EEUFA------
+105 °C 2000 to 5000 h
Low impedance 6.3 to 63 68 to 15000
FB EEUFB------
+105 °C 1000 to 2000 h
Low impedance 10 to 50 0.47 to 10000
NHE ECEA--GE--- +105 °C 2000 h Longlife 6.3 to 450 0.1 to 15000
NHG
+105 °C
1000 to 2000 h
MH ECA--MH--- +105 °C 1000 h Longlife 6.3 to 100 0.1 to 22000
NH ECEA--G---S +105 °C 2000 h Longlife 6.3 to 100 0.47 to 4700
NE ECA--TE---
+105 °C 5000 to 7000 h
Longlife 10 to 63 0.47 to 3300
EB
+105 °C
5000 to 10000 h
NX ECEA--NX--- +105 °C 5000 h Longlife 6.3 to 50 0.047 to 2200
3H ECEA--T---- +125 °C 1000 h High reliability 10 to 63 1 to 1000
TA
+125 °C 2000 h
MG EEUMG---- + 85 °C 2000 h High ripple 160 to 450 2.2 to 470 Available upon request
TH ECEA--V---T +105 °C 1000 h
Fixed time-in ter val circuit
10, 16, 25, 50
1 to 2200
NHG
+105 °C 1000 to 2000 h
MT ECEA--M---T + 85 °C 1000 h
Time constant circuit
6.3 to 50 47 to 2200
M
+85 °C 2000 h
MS ECEA--M--- + 85 °C 2000 h Low LC 10 to 50 0.1 to 100
GA EEUGA----- +105 °C 2000 h +105°C Standard 6.3 to 50 0.1 to 15000
NHG
+105 °C 1000 to 2000 h
EA EEUEA----- +105 °C 5000 h Longlife 160 to 450 10 to 150
EE
+105 °C 8000 to 10000 h
Horizontal
defection
current
cor rec tion
ECEA--W---- + 85 °C 2000 h
Horizontal
defection current
correction for TV
25 3.5 to 10 Not available
03 Dec. 2013
MEMO
Please contact Factory
1. The electronic components contained in this catalog a re designed and produced for use in home electric appliances, office eq uipment, info rmation equipment,
communications equipment, and other general purpose electronic devices.
Before use of any of these components for equipment that requires a high degree of safety, such as medical instruments, aeros pace equipment, disaster-prevention
equipment, security equipment, vehicles (automobile, train, vessel),
please be sure to contact our sales representative.
evitcetorp a llatsni ot erus eb ,eb thgim ti noitacilppa fo tros tahw rettam on ,ytefas fo eerged hgih a gniriuqer tnempiuqe rof stnenopmoc eseht fo eno gniylppa nehW .2
circuit or redundancy arrangement to enhance the safety of your equipment. In addition, please carry out the safety test on your own responsibility.
.ecnavda ni su htiw snoitacfiiceps eht no tnemeerga nettirw a ekam ot erus eb ,rof desu eb thgim yeht tnempiuqe fo tros tahw rettam on ,stcudorp ruo gnis
u nehW .3
4. Technical info rmation contained in this catalog is intended to convey examples of typical pe rfo rmances and/or applications and is not intended to make any
.sthgir hcus rednu esnecil yna tnarg ron seitrap driht yna ro ynapmoc ruo fo sthgir detaler rehto yna ro sthgir ytreporp lautcelletni eht ot tcepser htiw ytnarraw
5. In order to export product s in thi s catalog, the expor ter may be subject to the export license requiremen t und er the Foreign Exchange and Foreign Trade Law of
Japan.
6. No ozone-depleting substances (ODSs) under the Montreal Protocol are used in the manufacturing p rocesses of Automotive & Ind ustrial Systems Company, Panasonic
Corporation.
CAUTION AND WARNING
The information in this catalog is valid as of July 2014.
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Panasonic:
ECE-A1HKS3R3 EEU-FC1J221XB EEU-EB2V100 ECE-A1VKA100B EEU-EB1J101 EEU-EB2D101S EEU-
EB2W220B EEA-FC1E100 EEU-EB2D101 ECA-1HHG102B EEU-FM1E101 ECE-A1VKS3R3 EEU-FM1V152L
EEU-FM1H101 EEU-EB2E330 EEU-EB2G470S EEU-FC1A472L EEU-FM0J102 EEU-FM1H151 EEU-FM1H560
EEU-FM1V561L EEU-FC1V151B ECE-A1CKS470 EEU-FC1A561 EEU-FC1H330H EEU-FM1V331 EEU-
FM1V102B EEU-FM1V151 EEU-FC1J471B ECA-1EHG470I EEU-EB2V101 EEU-FC1H680B ECA-1HHG4R7I
EEU-EB1V330SH ECE-A0JKS470I ECE-A1CKA101B EEU-FC1J220B EEU-EB2G330S ECE-A1HKA4R7I ECA-
2GHG100 EEU-EB2C221S ECA-1AHG471B ECA-1VHG222B ECA-2GHG3R3 ECE-A1CKS470B EEU-FM1E221B
EEU-FC1A471B EEU-FC1J121B EEU-EB1E331B EEU-EB1H470SH EEU-FC1C272B EEU-FM1E102B EEU-
EB2V680S ECA-1JHG471B EEU-FM1E331 EEA-FC1C560 EEU-FM0J682 EEU-FM1H681L EEU-EB2C470 ECA-
1JHG100B EEU-FM1C222 EEU-FM1C222B EEU-FM1C392 EEU-FM1E152 ECA-0JHG102B ECA-0JHG102BJ
ECA-0JHG103B ECA-0JHG221B ECA-0JHG221I ECA-0JHG222B ECA-0JHG331B ECA-0JHG331I ECA-
0JHG332B ECA-0JHG471B ECA-0JHG471I ECA-0JHG472B ECA-0JHG682B ECA-1AHG103B ECA-1AHG221B
ECA-1AHG221I ECA-1AHG222B ECA-1AHG331B ECA-1AHG331I ECA-1AHG332B ECA-1AHG471BJ ECA-
1AHG472B ECA-1AHG682B ECA-1CHG101B ECA-1CHG101I ECA-1CHG102B ECA-1CHG221I ECA-1CHG222B
ECA-1CHG331B ECA-1CHG331BJ ECA-1CHG470B ECA-1CHG470I ECA-1CHG471BJ ECA-1CHG472B ECA-
1EHG101B ECA-1EHG101I