2014 CATALOG Electrolytic Capacitors Radial Lead Type Aluminum Electrolytic Capacitors 2014.11 industrial.panasonic.com/ww/ . Aluminum Electrolytic Capacitors/ FC Radial Lead Type Series: FC Type: A Features Endurance : 105 C 1000 h to 5000 h Low impedance AEC-Q200 qualified RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current -55 C to +105 C 6.3 V.DC to 100 V.DC 2.2 F to 15000 F 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) W.V. (V) 6.3 10 16 25 35 50 63 100 tan d 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07 tan d (120 Hz/+20 C) For capacitance value > 1000 F, add 0.02 per every 1000 F. After following life test with DC voltage and +105 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 C, the capacitors shall meet the limits specified bellow. Duration : 04 to 06.3: 1000 hours, 08: 2000 hours , 010: 3000 hours , 012.5 to 018: 5000 hours Endurance Capacitance change 20 % of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current W.V.(V.DC) Frequency (Hz) Cap (F) 2.2 to 6.3 to 100 60 120 1k 10 k 100 k 330 0.55 0.65 0.85 0.90 1.00 390 to 1000 0.70 0.75 0.90 0.95 1.00 1200 to 2200 0.75 0.80 0.90 0.95 1.00 2700 to 15000 0.80 0.85 0.95 1.00 1.00 Dimensions in mm (not to scale) fd0.05 (Unit : mm) Sleeve Pressure relief 06.3 08 010 + L= 14 min. 0D0.5 3 min. F0.5 - 0D0.5 = L16 : L1.0 (=08L15, 016L15, 018L15 : L1.5) L20 : L2.0 L>11 Body Dia. 0D 4 5 6.3 8 L=7 10 12.5 16 18 4 5 6.3 15 to 25 30 to 40 Body Length L Lead Dia. 0d 0.45 0.5 0.5 0.6 0.6 0.6 0.8 0.8 0.8 0.45 0.45 0.45 Lead space F 1.5 2.0 2.5 3.5 5.0 5.0 5.0 7.5 7.5 1.5 2.0 2.5 This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 - EEE-63 - Jul. 2014 Aluminum Electrolytic Capacitors/ FC Case size/ Impedance/ Ripple Current 6.3 V to 35 V W.V(V.DC) Case size (0DxL) 50 V 63 V 100 V Ripple Ripple Ripple Ripple Impedance Impedance Impedance Impedance Current Current Current Current ()/(100 kHz) ()/(100 kHz) ()/(100 kHz) ()/(100 kHz) (mA r.m.s) (mA r.m.s) (mA r.m.s) (mA r.m.s) 20 C -10 C /(100 kHz) 20 C -10 C /(100 kHz) 20 C -10 C /(100 kHz) 20 C -10 C /(100 kHz) 4 x 7 5 x 7 0.950 2.40 120 6.3 x 7 0.450 1.20 200 2.00 5.00 65 4 x 11 1.30 2.60 120 2.50 5.00 90 3.50 7.00 80 5 x 11 0.800 1.60 175 145 4.10 8.20 80 0.500 1.00 235 215 4.00 x 15 1.80 2.00 5 0.900 1.30 2.60 200 2.80 5.60 90 6.3 x 11.2 0.350 0.700 290 0.600 1.20 260 1.00 2.00 240 1.80 3.60 114 6.3 x 15 0.250 0.500 400 0.400 0.800 360 0.700 1.40 330 1.10 2.20 155 8 x 11.5 0.117 0.234 555 0.234 0.468 485 0.342 0.684 405 0.680 1.36 260 8 x 15 0.085 0.170 730 0.155 0.310 635 0.230 0.460 535 0.450 0.900 340 8 x 20 0.065 0.130 995 0.120 0.240 860 0.178 0.356 690 0.330 0.660 455 10 x 12.5 0.090 0.180 755 0.162 0.324 615 0.256 0.512 535 0.530 1.06 306 10 x 16 0.068 0.136 1050 0.119 0.238 850 0.194 0.388 600 0.360 0.720 400 10 x 20 0.052 0.104 1220 0.090 0.180 1030 0.147 0.294 885 0.240 0.480 463 10 x 25 0.045 0.090 1440 0.082 0.164 1200 0.130 0.260 1050 0.210 0.420 599 10 x 30 0.035 0.070 1815 0.060 0.120 1610 0.090 0.180 1300 0.150 0.300 698 12.5 x 15 0.065 0.130 1205 0.110 0.220 1150 0.150 0.300 1020 0.230 0.460 511 12.5 x 20 0.038 0.076 1655 0.063 0.126 1480 0.085 0.170 1285 0.180 0.360 671 12.5 x 25 0.030 0.060 1945 0.050 0.100 1832 0.070 0.140 1720 0.110 0.220 807 12.5 x 30 0.025 0.050 2310 0.040 0.080 2215 0.055 0.110 2090 0.098 0.196 937 12.5 x 35 0.022 0.044 2510 0.034 0.068 2285 0.047 0.094 2265 0.087 0.174 1040 12.5 x 40 0.018 0.036 2655 0.030 0.060 2590 0.042 0.084 2560 0.072 0.144 1130 16 x 15 0.043 0.086 1690 0.080 0.160 1610 0.090 0.180 1410 0.140 0.280 793 16 x 20 0.029 0.058 2205 0.048 0.096 1835 0.059 0.118 1765 0.110 0.220 995 16 x 25 0.022 0.044 2555 0.034 0.068 2235 0.050 0.100 2160 0.089 0.178 1170 16 x 31.5 0.018 0.036 3010 0.028 0.056 2700 0.043 0.086 2670 0.062 0.124 1520 16 x 35.5 0.016 0.032 3150 0.025 0.050 2790 0.036 0.072 2770 0.053 0.106 1730 16 x 40 0.015 0.030 3360 0.023 0.046 2845 0.030 0.060 2825 0.047 0.094 1920 18 x 15 0.038 0.076 2000 0.068 0.136 1900 0.086 0.172 1690 0.120 0.240 917 18 x 20 0.028 0.056 2490 0.042 0.084 2420 0.055 0.110 2290 0.080 0.160 1230 18 x 25 0.020 0.040 2740 0.029 0.058 2610 0.043 0.086 2585 0.070 0.140 1420 18 x 31.5 0.016 0.032 3635 0.025 0.050 3000 0.032 0.064 2950 0.062 0.124 1600 18 18 x 35.5 x 40 0.015 0.014 0.030 0.028 3680 3735 0.023 - 0.046 - 3100 - 0.030 0.025 0.060 0.050 3095 3205 0.041 0.036 0.082 0.072 1770 2300 Case size (0DxL) Capacitance (F) 5 x 11 1.0 2.2 3.3 4.7 10 12 15 18 22 Impedance ()/(100 kHz) 20 C 2.40 1.80 1.30 1.30 1.30 1.30 1.30 1.30 1.30 -10 C 4.80 3.60 2.60 2.60 2.60 2.60 2.60 2.60 2.60 Ripple Current (mA r.m.s)(100 kHz) 20 45 65 95 125 135 145 155 155 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 - EEE-64 - Jul. 2014 Aluminum Electrolytic Capacitors/ FC Standard Products Endurance : 105 C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size Specification Lead Length Ripple Imped- Endur- Lead Lead Space Cap. W.V. (20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 27 56 68 100 120 150 220 270 330 390 470 560 820 1000 1200 1500 6.3 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 4 5 4 5 6.3 5 6.3 6.3 6.3 6.3 8 8 8 8 10 10 8 10 10 12.5 10 10 16 10 12.5 16 12.5 18 12.5 12.5 16 12.5 16 12.5 16 18 16 16 18 16 18 18 7 7 11 11 7 15 11.2 11.2 11.2 15 11.5 11.5 11.5 15 12.5 12.5 20 16 20 15 25 25 15 30 20 15 20 15 25 30 20 35 20 40 25 20 31.5 35.5 25 40 31.5 35.5 65 120 120 175 200 235 290 290 290 400 555 555 555 730 755 755 995 1050 1220 1205 1440 1440 1690 1815 1655 1690 1655 2000 1945 2310 2205 2510 2205 2655 2555 2490 3010 3150 2740 3360 3635 3680 2.000 0.950 1.300 0.800 0.450 0.500 0.350 0.350 0.350 0.250 0.117 0.117 0.117 0.085 0.090 0.090 0.065 0.068 0.052 0.065 0.045 0.045 0.043 0.035 0.038 0.043 0.038 0.038 0.030 0.025 0.029 0.022 0.029 0.018 0.022 0.028 0.018 0.016 0.020 0.015 0.016 0.015 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 2000 2000 2000 2000 3000 3000 2000 3000 3000 5000 3000 3000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.45 0.45 0.45 0.50 0.45 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.80 0.60 0.80 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 1.5 2.0 2.5 2.0 2.5 2.5 2.5 2.5 3.5 3.5 3.5 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 5.0 7.5 5.0 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEAFC0J270( ) EEAFC0J560( ) EEUFC0J680( ) EEUFC0J101( ) EEAFC0J121( ) EEUFC0J151( ) EEUFC0J221( ) EEUFC0J271( ) EEUFC0J331S( ) EEUFC0J331( ) EEUFC0J391( ) EEUFC0J471( ) EEUFC0J561( ) EEUFC0J821L( ) EEUFC0J821( ) EEUFC0J102( ) EEUFC0J122L( ) EEUFC0J122( ) EEUFC0J152( ) EEUFC0J152S( ) EEUFC0J182( ) EEUFC0J222( ) EEUFC0J222S( ) EEUFC0J272L EEUFC0J272( ) EEUFC0J272S( ) EEUFC0J332( ) EEUFC0J332S( ) EEUFC0J392( ) EEUFC0J472 EEUFC0J472S( ) EEUFC0J562L EEUFC0J562( ) EEUFC0J682L EEUFC0J682( ) EEUFC0J682S( ) EEUFC0J822 EEUFC0J103 EEUFC0J103S( ) EEUFC0J123L EEUFC0J123 EEUFC0J153 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 100 200 100 200 100 100 100 100 100 100 100 100 100 100 100 50 50 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 500 500 1000 500 500 500 500 500 250 500 250 500 250 500 250 250 250 250 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 30/Jun/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 - EEE-65 - Jul. 2014 Aluminum Electrolytic Capacitors/ FC Standard Products Endurance : 105 C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size Specification Lead Length Ripple Imped- Endur- Lead Lead Space Cap. W.V. (20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 22 39 47 82 100 150 180 220 330 390 470 560 680 820 1000 10 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 4 5 4 5 6.3 5 5 6.3 6.3 6.3 6.3 8 8 8 10 8 10 10 8 10 10 12.5 10 12.5 16 10 12.5 12.5 18 12.5 16 12.5 16 12.5 16 16 18 16 18 16 18 18 18 7 7 11 11 7 11 15 11.2 11.2 11.2 15 11.5 11.5 11.5 12.5 15 12.5 16 20 16 20 15 25 20 15 30 20 25 15 30 20 35 20 40 25 25 20 31.5 25 35.5 31.5 35.5 40 65 120 120 175 200 175 235 290 290 290 400 555 555 555 755 730 755 1050 995 1050 1220 1205 1440 1655 1690 1815 1655 1945 2000 2310 2205 2510 2205 2655 2555 2555 2490 3010 2740 3150 3635 3680 3735 2.000 0.950 1.300 0.800 0.450 0.800 0.500 0.350 0.350 0.350 0.250 0.117 0.117 0.117 0.090 0.085 0.090 0.068 0.065 0.068 0.052 0.065 0.045 0.038 0.043 0.035 0.038 0.030 0.038 0.025 0.029 0.022 0.029 0.018 0.022 0.022 0.028 0.018 0.020 0.016 0.016 0.015 0.014 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 2000 2000 2000 3000 2000 3000 3000 2000 3000 3000 5000 3000 5000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.45 0.45 0.45 0.50 0.45 0.50 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 1.5 2.0 2.5 2.0 2.0 2.5 2.5 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEAFC1A220( ) EEAFC1A390( ) EEUFC1A470( ) EEUFC1A820( ) EEAFC1A820( ) EEUFC1A101S( ) EEUFC1A101( ) EEUFC1A151( ) EEUFC1A181( ) EEUFC1A221S( ) EEUFC1A221( ) EEUFC1A331( ) EEUFC1A391( ) EEUFC1A471( ) EEUFC1A561( ) EEUFC1A681L( ) EEUFC1A681( ) EEUFC1A821( ) EEUFC1A102L( ) EEUFC1A102( ) EEUFC1A122( ) EEUFC1A122S( ) EEUFC1A152( ) EEUFC1A182( ) EEUFC1A182S( ) EEUFC1A222L EEUFC1A222( ) EEUFC1A272( ) EEUFC1A272S( ) EEUFC1A332 EEUFC1A332S( ) EEUFC1A392L EEUFC1A392( ) EEUFC1A472L EEUFC1A472( ) EEUFC1A562( ) EEUFC1A562S( ) EEUFC1A682 EEUFC1A682S( ) EEUFC1A822L EEUFC1A822 EEUFC1A103 EEUFC1A123 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 250 500 500 250 250 250 250 250 250 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 30/Jun/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 - EEE-66 - Jul. 2014 Aluminum Electrolytic Capacitors/ FC Standard Products Endurance : 105 C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size Specification Lead Length Ripple Imped- Endur- Lead Lead Space Cap. W.V. (20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 15 27 39 47 56 68 82 100 120 180 220 270 330 390 470 560 680 820 16 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 4 5 4 5 5 6.3 5 5 6.3 6.3 6.3 8 8 8 10 8 10 10 8 10 10 12.5 10 10 10 16 10 12.5 16 12.5 18 12.5 16 12.5 16 12.5 18 16 18 16 18 16 18 16 18 7 7 11 11 11 7 11 15 11.2 11.2 15 11.5 11.5 11.5 12.5 15 12.5 16 20 16 20 15 20 25 25 15 30 20 15 25 15 25 20 30 20 35 20 25 20 31.5 25 35.5 31.5 40 35.5 65 120 120 175 175 200 175 235 290 290 400 555 555 555 755 730 755 1050 995 1050 1220 1205 1220 1440 1440 1690 1815 1655 1690 1945 2000 1945 2205 2310 2205 2510 2490 2555 2490 3010 2740 3150 3635 3360 3680 2.000 0.950 1.30 0.800 0.800 0.450 0.800 0.500 0.350 0.350 0.250 0.117 0.117 0.117 0.090 0.085 0.090 0.068 0.065 0.068 0.052 0.065 0.052 0.045 0.045 0.043 0.035 0.038 0.043 0.030 0.038 0.030 0.029 0.025 0.029 0.022 0.028 0.022 0.028 0.018 0.020 0.016 0.016 0.015 0.015 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 2000 2000 2000 3000 2000 3000 3000 2000 3000 3000 5000 3000 3000 3000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.45 0.45 0.45 0.50 0.50 0.45 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.80 0.60 0.80 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 1.5 2.0 2.0 2.5 2.0 2.0 2.5 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEAFC1C150( ) EEAFC1C270( ) EEUFC1C390( ) EEUFC1C470( ) EEUFC1C560( ) EEAFC1C560( ) EEUFC1C680( ) EEUFC1C820( ) EEUFC1C101( ) EEUFC1C121( ) EEUFC1C181( ) EEUFC1C221( ) EEUFC1C271( ) EEUFC1C331( ) EEUFC1C391( ) EEUFC1C471L( ) EEUFC1C471( ) EEUFC1C561( ) EEUFC1C681L( ) EEUFC1C681( ) EEUFC1C821( ) EEUFC1C821S( ) EEUFC1C102S( ) EEUFC1C102( ) EEUFC1C122( ) EEUFC1C122S( ) EEUFC1C152L EEUFC1C152( ) EEUFC1C152S( ) EEUFC1C182( ) EEUFC1C182S( ) EEUFC1C222( ) EEUFC1C222S( ) EEUFC1C272L EEUFC1C272( ) EEUFC1C332 EEUFC1C332S( ) EEUFC1C392( ) EEUFC1C392S( ) EEUFC1C472 EEUFC1C472S( ) EEUFC1C562L EEUFC1C562 EEUFC1C682 EEUFC1C822 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 100 200 100 200 100 100 100 100 100 100 100 100 100 100 50 100 50 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 500 250 500 250 500 250 500 250 250 250 250 250 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 30/Jun/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 - EEE-67 - Jul. 2014 Aluminum Electrolytic Capacitors/ FC Standard Products Endurance : 105 C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size Specification Lead Length Ripple ImpedEndurLead Lead Space Cap. W.V. (20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 10 22 27 39 47 56 82 100 120 180 220 270 330 390 470 560 25 680 820 1000 1200 1500 1800 2200 2700 3300 3900 4700 5600 4 5 4 5 6.3 5 5 6.3 6.3 6.3 8 8 10 8 10 10 8 10 10 12.5 10 10 12.5 10 12.5 16 12.5 18 12.5 16 12.5 16 12.5 18 16 16 18 16 18 18 18 7 7 11 11 7 11 15 11.2 11.2 15 11.5 11.5 12.5 15 12.5 16 20 16 20 15 20 25 20 30 20 15 25 15 25 20 30 20 35 20 25 31.5 25 35.5 31.5 35.5 40 65 120 120 175 200 175 235 290 290 400 555 555 755 730 755 1050 995 1050 1220 1205 1220 1440 1655 1815 1655 1690 1945 2000 1945 2205 2310 2205 2510 2490 2555 3010 2740 3150 3635 3680 3735 2.000 0.950 1.30 0.800 0.450 0.800 0.500 0.350 0.350 0.250 0.117 0.117 0.090 0.085 0.090 0.068 0.065 0.068 0.052 0.065 0.052 0.045 0.038 0.035 0.038 0.043 0.030 0.038 0.030 0.029 0.025 0.029 0.022 0.028 0.022 0.018 0.020 0.016 0.016 0.015 0.014 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 2000 2000 3000 2000 3000 3000 2000 3000 3000 5000 3000 3000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.45 0.45 0.45 0.50 0.45 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.80 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 1.5 2.0 2.5 2.0 2.0 2.5 2.5 2.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEAFC1E100( ) EEAFC1E220( ) EEUFC1E270( ) EEUFC1E390( ) EEAFC1E390( ) EEUFC1E470( ) EEUFC1E560( ) EEUFC1E820( ) EEUFC1E101S( ) EEUFC1E121( ) EEUFC1E181( ) EEUFC1E221( ) EEUFC1E271( ) EEUFC1E331L( ) EEUFC1E331( ) EEUFC1E391( ) EEUFC1E471L( ) EEUFC1E471( ) EEUFC1E561( ) EEUFC1E561S( ) EEUFC1E681( ) EEUFC1E821( ) EEUFC1E821S( ) EEUFC1E102L EEUFC1E102( ) EEUFC1E102S( ) EEUFC1E122( ) EEUFC1E122S( ) EEUFC1E152( ) EEUFC1E152S( ) EEUFC1E182L EEUFC1E182( ) EEUFC1E222 EEUFC1E222S( ) EEUFC1E272( ) EEUFC1E332 EEUFC1E332S( ) EEUFC1E392L EEUFC1E392 EEUFC1E472 EEUFC1E562 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 200 100 100 100 100 100 100 100 100 100 50 50 50 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 500 500 250 500 250 500 250 250 250 250 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 30/Jun/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 - EEE-68 - Jul. 2014 Aluminum Electrolytic Capacitors/ FC Standard Products Endurance : 105 C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size W.V. (V) Cap. (20 %) (F) 6.8 12 18 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 35 470 560 680 820 1000 1200 1500 1800 2200 2700 3300 3900 Dia. (mm) 4 5 4 5 5 6.3 5 5 6.3 6.3 6.3 6.3 8 8 8 10 8 10 10 8 10 10 12.5 10 10 12.5 10 12.5 16 12.5 18 12.5 16 12.5 16 12.5 16 18 12.5 16 18 16 18 16 18 18 18 Specification Ripple Imped- EndurCurrent ance ance Length (100 kHz) (100 kHz) (+105 C) (+20 C) (mm) (mA r.m.s.) () (hours) 7 65 2.000 1000 7 120 0.950 1000 11 120 1.300 1000 11 175 0.800 1000 11 175 0.800 1000 7 200 0.450 1000 11 175 0.080 1000 15 235 0.500 1000 11.2 290 0.350 1000 11.2 290 0.350 1000 11.2 290 0.350 1000 15 400 0.250 1000 11.5 555 0.117 2000 11.5 555 0.117 2000 11.5 555 0.117 2000 12.5 755 0.090 3000 15 730 0.085 2000 12.5 755 0.090 3000 16 1050 0.068 3000 20 995 0.065 2000 16 1050 0.068 3000 20 1220 0.052 3000 15 1205 0.065 5000 20 1220 0.052 3000 25 1440 0.045 3000 20 1655 0.038 5000 30 1815 0.035 3000 20 1655 0.038 5000 15 1690 0.043 5000 25 1945 0.030 5000 15 2000 0.038 5000 25 1945 0.030 5000 20 2205 0.029 5000 30 2310 0.025 5000 20 2205 0.029 5000 35 2510 0.022 5000 25 2555 0.022 5000 20 2490 0.028 5000 40 2655 0.018 5000 25 2555 0.022 5000 20 2490 0.028 5000 31.5 3010 0.018 5000 25 2740 0.020 5000 35.5 3150 0.016 5000 31.5 3635 0.016 5000 35.5 3680 0.015 5000 40 3735 0.014 5000 Lead Length Lead Dia. Lead Space Straight (mm) 0.45 0.45 0.45 0.50 0.50 0.45 0.50 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.80 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 Min. Packaging Q'ty (mm) 1.5 2.0 1.5 2.0 2.0 2.5 2.0 2.0 2.5 2.5 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Taping Taping B H (mm) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 (mm) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Part No. EEAFC1V6R8( ) EEAFC1V120( ) EEUFC1V180( ) EEUFC1V220( ) EEUFC1V270( ) EEAFC1V270( ) EEUFC1V330( ) EEUFC1V390( ) EEUFC1V470( ) EEUFC1V560( ) EEUFC1V680( ) EEUFC1V820( ) EEUFC1V101( ) EEUFC1V121( ) EEUFC1V151( ) EEUFC1V181( ) EEUFC1V221L( ) EEUFC1V221( ) EEUFC1V271( ) EEUFC1V331L( ) EEUFC1V331( ) EEUFC1V391( ) EEUFC1V391S( ) EEUFC1V471( ) EEUFC1V561( ) EEUFC1V561S( ) EEUFC1V681L EEUFC1V681( ) EEUFC1V681S( ) EEUFC1V821L( ) EEUFC1V821( ) EEUFC1V102( ) EEUFC1V102S( ) EEUFC1V122L EEUFC1V122( ) EEUFC1V152L EEUFC1V152( ) EEUFC1V152S( ) EEUFC1V182L EEUFC1V182( ) EEUFC1V182S( ) EEUFC1V222 EEUFC1V222S( ) EEUFC1V272L EEUFC1V272 EEUFC1V332 EEUFC1V392 Straight Taping Leads (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 200 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 (pcs) 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 500 500 250 500 250 500 250 250 250 250 250 250 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 30/Jun/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 - EEE-69 - Jul. 2014 Aluminum Electrolytic Capacitors/ FC Standard Products Endurance : 105 C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size W.V. (V) Cap. (20 %) (F) 1.0 2.2 3.3 4.7 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 50 220 270 330 390 470 560 680 820 1000 1200 1500 1800 2200 Dia. (mm) 5 5 5 5 4 5 5 5 5 5 5 6.3 6.3 6.3 6.3 8 8 10 8 10 10 8 10 10 12.5 10 10 12.5 12.5 16 10 12.5 12.5 18 12.5 16 12.5 18 12.5 16 16 18 16 16 18 18 Specification Ripple Imped- EndurCurrent ance ance Length (100 kHz) (100 kHz) (+105 C) (+20 C) (mm) (mA r.m.s.) () (hours) 11 20 2.400 1000 11 45 1.800 1000 11 65 1.300 1000 11 95 1.300 1000 11 90 2.500 1000 11 125 1.300 1000 11 135 1.300 1000 11 145 1.300 1000 11 155 1.300 1000 11 155 1.300 1000 15 215 0.900 1000 11.2 260 0.600 1000 11.2 260 0.600 1000 11.2 260 0.600 1000 15 360 0.400 1000 11.5 485 0.234 2000 11.5 485 0.234 2000 12.5 615 0.162 3000 15 635 0.155 2000 12.5 615 0.162 3000 16 850 0.119 3000 20 860 0.120 2000 16 850 0.119 3000 20 1030 0.090 3000 15 1150 0.110 5000 25 1200 0.082 3000 30 1610 0.060 3000 20 1480 0.063 5000 20 1480 0.063 5000 15 1610 0.080 5000 30 1610 0.060 3000 25 1832 0.050 5000 25 1832 0.050 5000 15 1900 0.068 5000 30 2215 0.040 5000 20 1835 0.048 5000 35 2285 0.034 5000 20 2420 0.042 5000 40 2590 0.030 5000 25 2235 0.034 5000 31.5 2700 0.028 5000 25 2610 0.029 5000 35.5 2790 0.025 5000 40 2845 0.023 5000 31.5 3000 0.025 5000 35.5 3100 0.023 5000 Lead Length Lead Dia. Lead Space Straight (mm) 0.50 0.50 0.50 0.50 0.45 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 Min. Packaging Q'ty (mm) 2.0 2.0 2.0 2.0 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.5 2.5 2.5 2.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 Taping Taping B H (mm) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 (mm) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Part No. EEUFC1H1R0( ) EEUFC1H2R2( ) EEUFC1H3R3( ) EEUFC1H4R7( ) EEUFC1H100( ) EEUFC1H100L( ) EEUFC1H120( ) EEUFC1H150( ) EEUFC1H180( ) EEUFC1H220( ) EEUFC1H270( ) EEUFC1H330( ) EEUFC1H390( ) EEUFC1H470( ) EEUFC1H560( ) EEUFC1H680( ) EEUFC1H820( ) EEUFC1H101( ) EEUFC1H121L( ) EEUFC1H121( ) EEUFC1H151( ) EEUFC1H181L( ) EEUFC1H181( ) EEUFC1H221( ) EEUFC1H221S( ) EEUFC1H271( ) EEUFC1H331L EEUFC1H331( ) EEUFC1H391( ) EEUFC1H391S( ) EEUFC1H471L EEUFC1H471( ) EEUFC1H561( ) EEUFC1H561S( ) EEUFC1H681L EEUFC1H681( ) EEUFC1H821L EEUFC1H821( ) EEUFC1H102L EEUFC1H102( ) EEUFC1H122 EEUFC1H122S( ) EEUFC1H152L EEUFC1H182L EEUFC1H182 EEUFC1H222 Straight Taping Leads (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 200 200 100 100 200 200 100 100 100 100 100 100 100 100 100 100 100 50 50 (pcs) 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 500 250 500 500 250 250 250 250 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Please kindly accept last shipment : 30/Jun/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 - EEE-70 - Jul. 2014 Aluminum Electrolytic Capacitors/ FC Standard Products Endurance : 105 C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size Specification Lead Length Ripple Imped- Endur- Lead Lead Space Cap. W.V. (20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 6.8 12 18 22 33 39 47 56 68 82 100 120 150 180 220 63 270 330 390 470 560 680 820 1000 1200 1500 1800 4 5 5 6.3 6.3 6.3 8 8 8 10 8 10 10 8 10 12.5 10 10 12.5 16 10 12.5 12.5 18 12.5 16 16 12.5 16 18 12.5 16 18 16 16 16 18 18 18 11 11 15 11.2 11.2 15 11.5 11.5 11.5 12.5 15 12.5 16 20 20 15 20 25 20 15 30 20 25 15 30 20 25 35 25 20 40 31.5 25 31.5 35.5 40 31.5 35.5 40 80 145 200 240 240 330 405 405 405 535 535 535 600 690 885 1020 885 1050 1285 1410 1300 1285 1720 1690 2090 1765 2160 2265 2160 2290 2560 2670 2585 2670 2770 2825 2950 3095 3205 3.500 2.000 1.300 1.000 1.000 0.700 0.342 0.342 0.342 0.256 0.230 0.256 0.194 0.178 0.147 0.150 0.147 0.130 0.085 0.090 0.090 0.085 0.070 0.086 0.055 0.059 0.050 0.047 0.050 0.055 0.042 0.043 0.043 0.043 0.036 0.030 0.032 0.030 0.025 1000 1000 1000 1000 1000 1000 2000 2000 2000 3000 2000 3000 3000 2000 3000 5000 3000 3000 5000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.45 0.50 0.50 0.50 0.50 0.50 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.60 0.80 0.60 0.60 0.60 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 0.80 1.5 2.0 2.0 2.5 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 3.5 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 5.0 7.5 5.0 7.5 7.5 5.0 7.5 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEUFC1J6R8( ) EEUFC1J120( ) EEUFC1J180( ) EEUFC1J220( ) EEUFC1J330( ) EEUFC1J390( ) EEUFC1J470( ) EEUFC1J560( ) EEUFC1J680( ) EEUFC1J820( ) EEUFC1J101L( ) EEUFC1J101( ) EEUFC1J121( ) EEUFC1J151( ) EEUFC1J181( ) EEUFC1J181S( ) EEUFC1J221X( ) EEUFC1J221( ) EEUFC1J221S( ) EEUFC1J271( ) EEUFC1J331L EEUFC1J331( ) EEUFC1J391( ) EEUFC1J391S( ) EEUFC1J471L EEUFC1J471( ) EEUFC1J561( ) EEUFC1J681L EEUFC1J681( ) EEUFC1J681S( ) EEUFC1J821L EEUFC1J821 EEUFC1J821S( ) EEUFC1J102U EEUFC1J102 EEUFC1J122L EEUFC1J122 EEUFC1J152 EEUFC1J182 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 200 200 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 2000 2000 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 1000 500 500 500 500 500 250 500 500 250 250 250 250 250 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 30/Jun/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 - EEE-71 - Jul. 2014 Aluminum Electrolytic Capacitors/ FC Standard Products Endurance : 105 C 04 to 06.3=1000 h, 08=2000 h, 010=3000 h, 012.5 to 018=5000 h Case size W.V. Cap. (20 %) (V) (F) 5.6 8.2 12 18 22 33 39 56 68 100 100 120 150 180 220 270 330 390 470 560 680 Specification Lead Length Ripple Imped- Endur- Lead Lead Space Current ance ance Dia. Dia. Length Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 5 5 6.3 6.3 8 8 10 8 10 10 10 12.5 10 12.5 16 12.5 18 12.5 16 12.5 16 12.5 18 16 18 16 18 16 18 18 11 15 11.2 15 11.5 15 12.5 20 16 20 25 15 30 20 15 25 15 30 20 35 25 40 20 31.5 25 35.5 31.5 40 35.5 40 80 90 114 155 260 340 306 455 400 463 599 511 698 671 793 807 917 937 995 1040 1170 1130 1230 1520 1420 1730 1600 1920 1770 2300 4.10 2.80 1.80 1.10 0.680 0.450 0.530 0.330 0.360 0.240 0.210 0.230 0.150 0.180 0.140 0.110 0.120 0.098 0.110 0.087 0.089 0.072 0.080 0.062 0.070 0.053 0.062 0.047 0.041 0.036 1000 1000 1000 1000 2000 2000 3000 2000 3000 3000 3000 5000 3000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 2.0 2.0 2.5 2.5 3.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. EEUFC2A5R6( ) EEUFC2A8R2( ) EEUFC2A120( ) EEUFC2A180( ) EEUFC2A220( ) EEUFC2A330L( ) EEUFC2A330( ) EEUFC2A390L( ) EEUFC2A390( ) EEUFC2A560( ) EEUFC2A680L( ) EEUFC2A680( ) EEUFC2A101L EEUFC2A101( ) EEUFC2A121S( ) EEUFC2A151( ) EEUFC2A151S( ) EEUFC2A181L EEUFC2A181( ) EEUFC2A221L EEUFC2A221( ) EEUFC2A271L EEUFC2A271S( ) EEUFC2A331 EEUFC2A331S( ) EEUFC2A391L EEUFC2A391 EEUFC2A471 EEUFC2A561 EEUFC2A681 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 100 100 100 100 50 100 50 50 2000 2000 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 30/Jun/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 - EEE-72 - Jul. 2014 Aluminum Electrolytic Capacitors/ FK Radial Lead Type Series: FK Type: A Features Low impedance (10 % to 30 % less than FC Series) Miniaturization (30 % to 40 % less than FC Series) Endurance : 3000 h to 5000 h at +105 C AEC-Q200 qualified RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d -55 C to +105 C 6.3 V.DC to 35 V.DC 180 F to 12000 F 20 % (120 Hz/+20 C) I < 0.01 CV (A) After 2 minutes W.V. 6.3 10 16 25 35 tan d 0.22 0.19 0.16 0.14 0.12 Add 0.02 per 1000 F for products of 1000 F or more. (120 Hz/+20 C) After following life test with DC voltage and +105 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors are restored to 20 C, the capacitors shall meet the limits specified bellow. Duration : 08: 3000 hours , 010: 4000 hours , 012.5 to 018: 5000 hours Endurance Capacitance change 20 % of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current W.V.(V.DC) 180 6.3 to 35 Frequency (Hz) Cap (F) 390 1200 60 120 1k 10 k 100 k to 330 0.60 0.70 0.85 0.95 1.00 to 1000 0.65 0.75 0.90 0.98 1.00 to 12000 0.75 0.80 0.95 1.00 1.00 Dimensions in mm (not to scale) Pressure relief fd0.05 Sleeve (Unit : mm) 08 010 + L= 14 min. 0D0.5 3 min. F0.5 - 0D0.5 = L16 : L1.5 L20 : L2.0 Body Dia. fD 8 10 16 18 Body Length L -- -- 12.5 to 25 12.5 30 to 40 -- -- Lead Dia. fd 0.6 0.6 0.6 0.8 0.8 0.8 Lead space F 3.5 5.0 5.0 5.0 7.5 7.5 This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2014 - EEE-73 - Aluminum Electrolytic Capacitors/ FK Case size/Impedance/Ripple current Impedance ()/(100 kHz) Case size (0DxL) 8 8 8 10 10 10 10 10 12.5 12.5 12.5 12.5 12.5 12.5 16 16 16 18 18 18 x x x x x x x x x x x x x x x x x x x x 11.5 15 20 12.5 16 20 25 30 15 20 25 30 35 40 15 20 25 15 20 25 Ripple Current (mA r.m.s.)/(100 kHz) +20 C -10 C +105 C 0.090 0.062 0.044 0.063 0.049 0.035 0.033 0.025 0.048 0.029 0.022 0.018 0.016 0.014 0.038 0.026 0.019 0.036 0.025 0.018 0.180 0.124 0.088 0.126 0.098 0.070 0.066 0.050 0.096 0.058 0.044 0.036 0.032 0.028 0.076 0.052 0.038 0.072 0.050 0.036 630 860 1220 900 1240 1490 1680 2140 1400 1890 2280 2720 2940 3010 1800 2330 2760 2060 2640 2850 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2014 - EEE-74 - Aluminum Electrolytic Capacitors/ FK Standard Products Endurance : 105 C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h Case size W.V. Cap. (20 %) Dia. (V) (F) (mm) 680 1000 1500 1800 2200 6.3 3300 4700 5600 6800 8200 12000 560 820 1200 1500 1800 10 2700 3900 4700 5600 6800 8200 8 8 10 8 10 12.5 10 10 10 12.5 16 12.5 18 12.5 16 12.5 12.5 16 18 18 8 8 10 8 10 12.5 10 10 10 12.5 16 12.5 18 12.5 16 12.5 12.5 16 18 18 Specification Ripple Imped- EndurCurrent ance ance Length (100 kHz) (100 kHz) (+105 C) (+20 C) (hours) (mm) (mA r.m.s.) () 11.5 15 12.5 20 16 15 20 25 30 20 15 25 15 30 20 35 40 25 20 25 11.5 15 12.5 20 16 15 20 25 30 20 15 25 15 30 20 35 40 25 20 25 630 860 900 1220 1240 1400 1490 1680 2140 1890 1800 2280 2060 2720 2330 2940 3010 2760 2640 2850 630 860 900 1220 1240 1400 1490 1680 2140 1890 1800 2280 2060 2720 2330 2940 3010 2760 2640 2850 0.090 0.062 0.063 0.044 0.049 0.048 0.035 0.033 0.025 0.029 0.038 0.022 0.036 0.018 0.026 0.016 0.014 0.019 0.025 0.018 0.090 0.062 0.063 0.044 0.049 0.048 0.035 0.033 0.025 0.029 0.038 0.022 0.036 0.018 0.026 0.016 0.014 0.019 0.025 0.018 3000 3000 4000 3000 4000 5000 4000 4000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 3000 3000 4000 3000 4000 5000 4000 4000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 Lead Length Lead Lead Space Dia. Taping Straight B (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 5.0 7.5 7.5 7.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 Min. Packaging Q'ty Part No. EEUFK0J681( ) EEUFK0J102L( ) EEUFK0J102( ) EEUFK0J152L( ) EEUFK0J152( ) EEUFK0J182S( ) EEUFK0J222( ) EEUFK0J222L( ) EEUFK0J332L EEUFK0J332( ) EEUFK0J332S( ) EEUFK0J472( ) EEUFK0J472S( ) EEUFK0J562L EEUFK0J562S( ) EEUFK0J682L EEUFK0J822L EEUFK0J822( ) EEUFK0J822S( ) EEUFK0J123S( ) EEUFK1A561( ) EEUFK1A821L( ) EEUFK1A821( ) EEUFK1A122L( ) EEUFK1A122( ) EEUFK1A152S( ) EEUFK1A182( ) EEUFK1A182L( ) EEUFK1A272L EEUFK1A272( ) EEUFK1A272S( ) EEUFK1A392( ) EEUFK1A392S( ) EEUFK1A472L EEUFK1A472S( ) EEUFK1A562L EEUFK1A682L EEUFK1A682( ) EEUFK1A682S( ) EEUFK1A822S( ) Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 100 100 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 * When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2014 - EEE-75 - Aluminum Electrolytic Capacitors/ FK Standard Products Endurance : 105 C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h Case size W.V. Cap. (20 %) Dia. (V) (F) (mm) 390 680 820 1000 1200 1500 16 2200 2700 3300 3900 4700 5600 6800 270 390 470 560 820 1000 1200 25 1500 1800 2200 2700 3300 4700 8 8 10 8 10 10 12.5 10 10 12.5 16 12.5 18 12.5 12.5 16 12.5 18 16 18 8 8 10 8 10 10 12.5 10 12.5 10 16 12.5 18 12.5 16 12.5 12.5 16 18 18 Specification Ripple Imped- EndurCurrent ance ance Length (100 kHz) (100 kHz) (+105 C) (+20 C) (mm) (mA r.m.s.) () (hours) 11.5 15 12.5 20 16 20 15 25 30 20 15 25 15 30 35 20 40 20 25 25 11.5 15 12.5 20 16 20 15 25 20 30 15 25 15 30 20 35 40 25 20 25 630 860 900 1220 1240 1490 1400 1680 2140 1890 1800 2280 2060 2720 2940 2330 3010 2640 2760 2850 630 860 900 1220 1240 1490 1400 1680 1890 2140 1800 2280 2060 2720 2330 2940 3010 2760 2640 2850 0.090 0.062 0.063 0.044 0.049 0.035 0.048 0.033 0.025 0.029 0.038 0.022 0.036 0.018 0.016 0.026 0.014 0.025 0.019 0.018 0.090 0.062 0.063 0.044 0.049 0.035 0.048 0.033 0.029 0.025 0.038 0.022 0.036 0.018 0.026 0.016 0.014 0.019 0.025 0.018 3000 3000 4000 3000 4000 4000 5000 4000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 3000 3000 4000 3000 4000 4000 5000 4000 5000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 Lead Length Lead Lead Space Dia. Taping Straight B (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 5.0 7.5 5.0 7.5 7.5 7.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 Min. Packaging Q'ty Part No. EEUFK1C391( ) EEUFK1C681L( ) EEUFK1C681( ) EEUFK1C821L( ) EEUFK1C102( ) EEUFK1C122( ) EEUFK1C122S( ) EEUFK1C152L( ) EEUFK1C222L EEUFK1C222( ) EEUFK1C222S( ) EEUFK1C272( ) EEUFK1C272S( ) EEUFK1C332L EEUFK1C392L EEUFK1C392S( ) EEUFK1C472L EEUFK1C472S( ) EEUFK1C562( ) EEUFK1C682S( ) EEUFK1E271( ) EEUFK1E391L( ) EEUFK1E471( ) EEUFK1E561L( ) EEUFK1E561( ) EEUFK1E821( ) EEUFK1E821S( ) EEUFK1E102L( ) EEUFK1E122( ) EEUFK1E152L EEUFK1E152S( ) EEUFK1E182( ) EEUFK1E182S( ) EEUFK1E222L EEUFK1E222S( ) EEUFK1E272L EEUFK1E332L EEUFK1E332( ) EEUFK1E332S( ) EEUFK1E472S( ) Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 100 200 100 200 100 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 100 100 200 100 100 100 100 100 100 100 100 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 * When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2014 - EEE-76 - Aluminum Electrolytic Capacitors/ FK Standard Products Endurance : 105 C 08=3000 h, 010=4000 h, 012.5 to 018=5000 h Case size W.V. Cap. (20 %) Dia. (V) (F) (mm) 180 270 390 560 680 820 35 1000 1200 1500 1800 2200 3300 8 8 10 8 10 10 12.5 10 12.5 10 16 12.5 18 12.5 12.5 16 12.5 16 18 18 Specification Ripple Imped- EndurCurrent ance ance Length (100 kHz) (100 kHz) (+105 C) (+20 C) (hours) (mm) (mA r.m.s.) () 11.5 15 12.5 20 16 20 15 25 20 30 15 25 15 30 35 20 40 25 20 25 630 860 900 1220 1240 1490 1400 1680 1890 2140 1800 2280 2060 2720 2940 2330 3010 2760 2640 2850 0.090 0.062 0.063 0.044 0.049 0.035 0.048 0.033 0.029 0.025 0.038 0.022 0.036 0.018 0.016 0.026 0.014 0.019 0.025 0.018 3000 3000 4000 3000 4000 4000 5000 4000 5000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 Lead Length Lead Lead Space Dia. Taping Straight B (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 5.0 7.5 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 7.5 Min. Packaging Q'ty Part No. EEUFK1V181( ) EEUFK1V271L( ) EEUFK1V271( ) EEUFK1V391L( ) EEUFK1V391( ) EEUFK1V561( ) EEUFK1V561S( ) EEUFK1V681L( ) EEUFK1V821( ) EEUFK1V102L EEUFK1V102S( ) EEUFK1V122( ) EEUFK1V122S( ) EEUFK1V152L EEUFK1V182L EEUFK1V182S( ) EEUFK1V222L EEUFK1V222( ) EEUFK1V222S( ) EEUFK1V332S( ) Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 100 100 200 100 100 100 100 100 100 100 100 1000 1000 500 1000 500 500 500 500 500 250 500 250 250 250 250 250 * When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2014 - EEE-77 - Aluminum Electrolytic Capacitors/ FM Radial Lead Type Series: FM Type: A Features Low impedance (40 % to 70 % less than FC Series) Endurance : 2000 h to 7000 h at +105 C RoHS directive compliant Attention Not applicable for automotive Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d Endurance -40 C to +105 C 6.3 V.DC to 50 V.DC 22 F to 6800 F 20 % (120 Hz/+20 C) I < 0.01 CV (A) After 2 minutes W.V. 6.3 10 16 25 35 50 (max.) (120 Hz/+20 C) tan d 0.22 0.19 0.16 0.14 0.12 0.10 Add 0.02 per 1000 F for products of 1000 F or more. After following life test with DC voltage and +105 C2 C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 C, the capacitors shall meet the limits specified below. Duration 05 to 06.3 : 2000 hours, 08x11.5 to 08x15: 3000 hours 08x20 to 010x16 : 4000 hours, 010x20 to 012.5x20/ 016x20: 5000 hours 012.5x25 to 012.5x35/ 016x25 : 7000 hours Capacitance change 25 % of initial measured value (6.3 V to 10 V : 30 %) tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current W.V.(V.DC) 6.3 to 50 Frequency (Hz) Cap (F) 22 to 60 120 1k 10 k 100 k 33 0.45 0.55 0.75 0.90 1.00 47 to 330 0.60 0.70 0.85 0.95 1.00 390 to 1000 0.65 0.75 0.90 0.98 1.00 1200 to 6800 0.75 0.80 0.95 1.00 1.00 Dimensions in mm (not to scale) fd0.05 (Unit : mm) Sleeve Pressure relief 06.3 08 010 + L= = Body Dia. 0D 14 min. 0D0.5 3 min. F0.5 - 0D0.5 L16 : L1.5 L20 : L2.0 5 6.3 8 10 12.5 16 Body Length L -- -- -- -- 12.5 to 25 30 to 40 -- Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2014 - EEE-78 - Aluminum Electrolytic Capacitors/ FM Case size/Impedance/Ripple current 6.3 V to 35 V W.V.(V.DC) Case size (0DxL) Impedance (/100 kHz) 50 V Ripple Current (mA r.m.s./100 kHz) +105 C Impedance (/100 kHz) Ripple Current (mA r.m.s./100 kHz) +20 C -10 C +20 C -10 C 5 x 11 0.300 1.000 280 0.340 1.130 +105 C 250 6.3 x 11.2 0.130 0.430 455 0.140 0.460 405 8 x 11.5 0.056 0.168 950 0.061 0.183 870 8 x 15 0.041 0.123 1240 0.045 0.135 1140 8 x 20 0.030 0.090 1560 0.033 0.099 1430 10 x 12.5 0.038 0.114 1290 0.042 0.126 1170 10 x 16 0.026 0.078 1790 0.030 0.090 1650 10 x 20 0.019 0.057 2180 0.023 0.069 1890 10 x 25 0.018 0.054 2470 0.022 0.066 2150 12.5 x 20 0.018 0.045 2600 0.022 0.055 2260 12.5 x 25 0.015 0.038 3190 0.018 0.045 2660 12.5 x 30 0.013 0.033 3630 0.016 0.040 3160 12.5 x 35 0.012 0.030 3750 0.014 0.035 3270 16 x 20 0.017 0.043 3300 0.019 0.048 2870 16 x 25 0.014 0.035 3820 0.016 0.040 3320 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2014 - EEE-79 - Aluminum Electrolytic Capacitors/ FM Standard Products Case size Specification Lead Length Ripple ImpedEndurLead Lead Space Cap. W.V. (20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 150 330 560 820 1000 1200 6.3 1500 2200 3300 3900 4700 5600 6800 100 220 470 680 1000 10 1200 1500 2200 3300 3900 4700 5600 68 120 330 470 680 16 1000 1200 1500 2200 2700 3300 3900 5 6.3 8 8 10 8 10 10 10 12.5 12.5 12.5 12.5 16 16 5 6.3 8 8 10 8 10 10 10 12.5 12.5 12.5 16 12.5 16 5 6.3 8 8 10 8 10 10 10 12.5 12.5 12.5 16 12.5 16 11 11.2 11.5 15 12.5 20 16 20 25 20 25 30 35 20 25 11 11.2 11.5 15 12.5 20 16 20 25 20 25 30 20 35 25 11 11.2 11.5 15 12.5 20 16 20 25 20 25 30 20 35 25 280 455 950 1240 1290 1560 1790 2180 2470 2600 3190 3630 3750 3300 3820 280 455 950 1240 1290 1560 1790 2180 2470 2600 3190 3630 3300 3750 3820 280 455 950 1240 1290 1560 1790 2180 2470 2600 3190 3630 3300 3750 3820 0.300 0.130 0.056 0.041 0.038 0.030 0.026 0.019 0.018 0.018 0.015 0.013 0.012 0.017 0.014 0.300 0.130 0.056 0.041 0.038 0.030 0.026 0.019 0.018 0.018 0.015 0.013 0.017 0.012 0.014 0.300 0.130 0.056 0.041 0.038 0.030 0.026 0.019 0.018 0.018 0.015 0.013 0.017 0.012 0.014 2000 2000 3000 3000 4000 4000 4000 5000 5000 5000 7000 7000 7000 5000 7000 2000 2000 3000 3000 4000 4000 4000 5000 5000 5000 7000 7000 5000 7000 7000 2000 2000 3000 3000 4000 4000 4000 5000 5000 5000 7000 7000 5000 7000 7000 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 2.0 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.0 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 2.0 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 2.5 2.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 Min. Packaging Q'ty Part No. EEUFM0J151( ) EEUFM0J331( ) EEUFM0J561( ) EEUFM0J821L( ) EEUFM0J102( ) EEUFM0J122L( ) EEUFM0J122( ) EEUFM0J152( ) EEUFM0J222L( ) EEUFM0J332( ) EEUFM0J392( ) EEUFM0J472L EEUFM0J562L EEUFM0J562S( ) EEUFM0J682( ) EEUFM1A101( ) EEUFM1A221( ) EEUFM1A471( ) EEUFM1A681L( ) EEUFM1A681( ) EEUFM1A102L( ) EEUFM1A102( ) EEUFM1A122( ) EEUFM1A152L( ) EEUFM1A222( ) EEUFM1A332( ) EEUFM1A392L EEUFM1A392S( ) EEUFM1A472L EEUFM1A562( ) EEUFM1C680( ) EEUFM1C121( ) EEUFM1C331( ) EEUFM1C471L( ) EEUFM1C471( ) EEUFM1C681L( ) EEUFM1C681( ) EEUFM1C102( ) EEUFM1C122L( ) EEUFM1C152( ) EEUFM1C222( ) EEUFM1C272L EEUFM1C272S( ) EEUFM1C332L EEUFM1C392( ) Long Taping Lead (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 * When requesting taped product, please put the letter "B" of "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2014 - EEE-80 - Aluminum Electrolytic Capacitors/ FM Standard Products Case size Specification Lead Length Ripple ImpedEndurLead Lead Space Cap. W.V. (20 %) Dia. Length Current ance ance Dia. Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 47 100 220 330 470 25 680 820 1000 1500 1800 2200 2700 33 68 150 220 330 35 470 560 680 1000 1200 50 1500 1800 22 56 100 120 150 180 220 270 330 470 560 680 820 1000 5 6.3 8 8 10 8 10 10 10 12.5 12.5 12.5 16 12.5 16 5 6.3 8 8 10 8 10 10 10 12.5 12.5 12.5 16 12.5 16 5 6.3 8 8 10 8 10 10 10 12.5 12.5 12.5 12.5 16 16 11 11.2 11.5 15 12.5 20 16 20 25 20 25 30 20 35 25 11 11.2 11.5 15 12.5 20 16 20 25 20 25 30 20 35 25 11 11.2 11.5 15 12.5 20 16 20 25 20 25 30 35 20 25 280 455 950 1240 1290 1560 1790 2180 2470 2600 3190 3630 3300 3750 3820 280 455 950 1240 1290 1560 1790 2180 2470 2600 3190 3630 3300 3750 3820 250 405 870 1140 1170 1430 1650 1890 2150 2260 2660 3160 3270 2870 3320 0.300 0.130 0.056 0.041 0.038 0.030 0.026 0.019 0.018 0.018 0.015 0.013 0.017 0.012 0.014 0.300 0.130 0.056 0.041 0.038 0.030 0.026 0.019 0.018 0.018 0.015 0.013 0.017 0.012 0.014 0.340 0.140 0.061 0.045 0.042 0.033 0.030 0.023 0.022 0.022 0.018 0.016 0.014 0.019 0.016 2000 2000 3000 3000 4000 4000 4000 5000 5000 5000 7000 7000 5000 7000 7000 2000 2000 3000 3000 4000 4000 4000 5000 5000 5000 7000 7000 5000 7000 7000 2000 2000 3000 3000 4000 4000 4000 5000 5000 5000 7000 7000 7000 5000 7000 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 2.0 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 2.0 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 2.0 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 Min. Packaging Q'ty Part No. EEUFM1E470( ) EEUFM1E101( ) EEUFM1E221( ) EEUFM1E331L( ) EEUFM1E331( ) EEUFM1E471L( ) EEUFM1E471( ) EEUFM1E681( ) EEUFM1E821L( ) EEUFM1E102( ) EEUFM1E152( ) EEUFM1E182L EEUFM1E182S( ) EEUFM1E222L EEUFM1E272( ) EEUFM1V330( ) EEUFM1V680( ) EEUFM1V151( ) EEUFM1V221L( ) EEUFM1V221( ) EEUFM1V331L( ) EEUFM1V331( ) EEUFM1V471( ) EEUFM1V561L( ) EEUFM1V681( ) EEUFM1V102( ) EEUFM1V122L EEUFM1V122S( ) EEUFM1V152L EEUFM1V182( ) EEUFM1H220( ) EEUFM1H560( ) EEUFM1H101( ) EEUFM1H121L( ) EEUFM1H151( ) EEUFM1H181L( ) EEUFM1H221( ) EEUFM1H271( ) EEUFM1H331L( ) EEUFM1H471( ) EEUFM1H561( ) EEUFM1H681L EEUFM1H821L EEUFM1H821S( ) EEUFM1H102( ) Long Taping Lead (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 * When requesting taped product, please put the letter "B" of "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 01 May. 2014 - EEE-81 - Aluminum Electrolytic Capacitors/ FR Radial Lead Type Series: FR Type: A Features Country of origin Low ESR (Same as FM Series) Endurance : 5000 h to 10000 h at +105 C RoHS directive compliant Malaysia Attention Not applicable for automotive Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d -40 C to +105 C 6.3 V.DC to 100 V.DC 4.7 F to 8200 F 20 % (120 Hz/+20 C) I < 0.01 CV (A) After 2 minutes W.V. 6.3 10 16 25 35 50 63 tan d 0.22 0.19 0.16 0.14 0.12 0.10 0.09 Add 0.02 per 1000 F for products of 1000 F or more. 100 0.08 (120 Hz/+20 C) After following life test with DC voltage and +105 C2 C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 C, the capacitors shall meet the limits specified below. Duration 05x11/ 06.3x11.2 : 5000 hours 08x11.5/ 010x12.5 : 6000 hours ( Only EEUFR1V331U (010x12.5) 5000 hours) 08x15/ 010x16 : 8000 hours, 08x20 : 9000 hours 010x20 to 010x25/ 012.5x20 to 012.5x35/ 016x20 to 016x25 : 10000 hours Endurance Capacitance change 25 % of initial measured value (6.3 V to 10 V : 30 %) tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current W.V.(V.DC) 4.7 6.3 to 100 Frequency (Hz) Cap (F) 47 60 120 1k 10 k 100 k to 33 0.45 0.55 0.75 0.90 1.00 to 330 0.60 0.70 0.85 0.95 1.00 390 to 1000 0.65 0.75 0.90 0.98 1.00 1200 to 8200 0.75 0.80 0.95 1.00 1.00 Dimensions in mm (not to scale) fd0.05 Sleeve Pressure relief 06.3 (Unit : mm) 08 010 + L= = Body Dia. 0D 14 min. 0D0.5 3 min. F0.5 - 0D0.5 L16 : L1.5 L20 : L2.0 5 6.3 8 10 12.5 16 Body Length L -- -- -- -- 12.5 to 25 30 to 35 -- Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06 Nov. 2014 - EEE-82 - Aluminum Electrolytic Capacitors/ FR Case size/Impedance/Ripple current 6.3 V to 35 V W.V.(V.DC) Case size (0DxL) Impedance (/100 kHz) 50 V Ripple Current (mA r.m.s./100 kHz) +105 C Impedance (/100 kHz) Ripple Current (mA r.m.s./100 kHz) +20 C -10 C +20 C -10 C 5 x 11 0.300 1.000 280 0.340 1.130 +105 C 250 6.3 x 11.2 0.130 0.430 455 0.140 0.460 405 8 x 11.5 0.056 0.168 950 0.061 0.183 870 8 x 15 0.041 0.123 1240 0.045 0.135 1140 8 x 20 0.030 0.090 1560 0.033 0.099 1430 10 x 12.5 0.043 0.114 1290 0.042 0.126 1170 10 x 16 0.028 0.078 1790 0.030 0.090 1650 10 x 20 0.020 0.057 2180 0.023 0.069 1890 10 x 25 0.018 0.054 2470 0.022 0.066 2150 12.5 x 20 0.018 0.045 2600 0.022 0.055 2260 12.5 x 25 0.015 0.038 3190 0.018 0.045 2660 12.5 x 30 0.013 0.033 3630 0.016 0.040 3160 12.5 x 35 0.012 0.030 3750 0.014 0.035 3270 16 x 20 0.017 0.043 3300 0.019 0.048 2870 16 x 25 0.014 0.035 3820 0.016 0.040 3320 63 V W.V.(V.DC) Case size (0DxL) Impedance (/100 kHz) Ripple Current (mA r.m.s./100 kHz) +20 C -10 C 0.510 2.040 +105 C 5 x 11 6.3 x 11.2 0.210 0.840 284 8 x 11.5 0.092 0.368 566 8 x 15 0.068 0.272 741 8 x 20 0.050 0.200 930 10 x 12.5 0.063 0.252 761 10 x 16 0.045 0.180 1073 10 x 20 0.035 0.140 1229 10 x 25 0.033 0.132 1500 12.5 x 20 0.033 0.125 1582 12.5 x 25 0.027 0.092 1995 12.5 x 30 0.024 0.082 2528 12.5 x 35 0.021 0.071 2780 16 x 20 0.029 0.093 2153 16 x 25 0.024 0.074 2988 100 V W.V.(V.DC) Case size (0DxL) 10 x 20 175 Impedance (/100 kHz) Ripple Current (mA r.m.s./100 kHz) +20 C -10 C +105 C 0.084 0.336 1500 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06 Nov. 2014 - EEE-83 - Aluminum Electrolytic Capacitors/ FR Standard Products Case size W.V. Cap. (20 %) (V) (F) 150 220 330 470 820 1000 1200 6.3 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 100 150 220 270 470 680 820 1000 10 1500 1800 2200 3300 3900 4700 5600 6800 Specification Lead Length Ripple Imped- Endur- Lead Lead Space Current ance ance Dia. Dia. Length Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 5 6.3 6.3 6.3 8 8 8 10 8 10 10 10 10 12.5 12.5 12.5 12.5 16 16 5 5 6.3 6.3 8 8 10 10 8 8 10 10 10 12.5 12.5 12.5 16 12.5 12.5 16 11 11.2 11.2 11.2 11.5 11.5 15 12.5 20 16 20 25 25 20 25 30 35 20 25 11 11 11.2 11.2 11.5 11.5 12.5 16 15 20 16 20 25 20 25 30 20 35 35 25 280 455 455 455 950 950 1240 1290 1560 1790 2180 2470 2470 2600 3190 3630 3750 3300 3820 280 280 455 455 950 950 1290 1790 1240 1560 1790 2180 2470 2600 3190 3630 3300 3750 3750 3820 0.300 0.130 0.130 0.130 0.056 0.056 0.041 0.043 0.030 0.028 0.020 0.018 0.018 0.018 0.015 0.013 0.012 0.017 0.014 0.300 0.300 0.130 0.130 0.056 0.056 0.043 0.028 0.041 0.030 0.028 0.020 0.018 0.018 0.015 0.013 0.017 0.012 0.012 0.014 5000 5000 5000 5000 6000 6000 8000 6000 9000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 5000 5000 5000 5000 6000 6000 6000 8000 8000 9000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 2.0 2.5 2.5 2.5 3.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.0 2.0 2.5 2.5 3.5 3.5 5.0 5.0 3.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 5.0 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) (pcs) EEUFR0J151( ) EEUFR0J221( ) EEUFR0J331( ) EEUFR0J471( ) EEUFR0J821( ) EEUFR0J102( ) EEUFR0J122L( ) EEUFR0J122( ) EEUFR0J152L( ) EEUFR0J182( ) EEUFR0J222( ) EEUFR0J272L( ) EEUFR0J332L( ) EEUFR0J392( ) EEUFR0J472( ) EEUFR0J562L EEUFR0J682L EEUFR0J682S( ) EEUFR0J822( ) EEUFR1A101( ) EEUFR1A151( ) EEUFR1A221( ) EEUFR1A271( ) EEUFR1A471( ) EEUFR1A681( ) EEUFR1A821( ) EEUFR1A102( ) EEUFR1A102L( ) EEUFR1A152L( ) EEUFR1A152( ) EEUFR1A182( ) EEUFR1A222L( ) EEUFR1A332( ) EEUFR1A392( ) EEUFR1A472L EEUFR1A472S( ) EEUFR1A562L EEUFR1A682L EEUFR1A682( ) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 2000 2000 2000 2000 1000 1000 1000 500 1000 500 500 500 500 500 500 250 250 2000 2000 2000 2000 1000 1000 500 500 1000 1000 500 500 500 500 500 250 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06 Nov. 2014 - EEE-84 - Aluminum Electrolytic Capacitors/ FR Standard Products Case size W.V. Cap. (20 %) (V) (F) 68 100 120 220 470 680 1000 16 1500 1800 2200 2700 3300 3900 4700 5600 47 68 100 150 220 330 390 470 560 25 680 820 1000 1200 1500 1800 2200 2700 3300 Specification Lead Length Ripple Imped- Endur- Lead Lead Space Current ance ance Dia. Dia. Length Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 5 5 6.3 6.3 8 8 10 8 10 10 10 10 12.5 12.5 12.5 16 12.5 16 12.5 16 16 5 5 6.3 6.3 8 8 8 8 8 10 8 8 10 10 10 10 10 12.5 12.5 16 12.5 16 12.5 16 16 11 11 11.2 11.2 11.5 15 12.5 20 16 20 25 25 20 25 30 20 35 20 35 25 25 11 11 11.2 11.2 11.5 11.5 15 15 20 12.5 20 20 16 20 20 25 25 20 25 20 30 20 35 20 25 280 280 455 455 950 1240 1290 1560 1790 2180 2470 2470 2600 3190 3630 3300 3750 3300 3750 3820 3820 280 280 455 455 950 950 1240 1240 1560 1290 1560 1560 1790 2180 2180 2470 2470 2600 3190 3300 3630 3300 3750 3300 3820 0.300 0.300 0.130 0.130 0.056 0.041 0.043 0.030 0.028 0.020 0.018 0.018 0.018 0.015 0.013 0.017 0.012 0.017 0.012 0.014 0.014 0.300 0.300 0.130 0.130 0.056 0.056 0.041 0.041 0.030 0.043 0.030 0.030 0.028 0.020 0.020 0.018 0.018 0.018 0.015 0.017 0.013 0.017 0.012 0.017 0.014 5000 5000 5000 5000 6000 8000 6000 9000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 5000 5000 5000 5000 6000 6000 8000 8000 9000 6000 9000 9000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 2.0 2.0 2.5 2.5 3.5 3.5 5.0 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 7.5 2.0 2.0 2.5 2.5 3.5 3.5 3.5 3.5 3.5 5.0 3.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 2.5 2.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 2.5 2.5 2.5 2.5 Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) (pcs) EEUFR1C680( ) EEUFR1C101( ) EEUFR1C121( ) EEUFR1C221( ) EEUFR1C471( ) EEUFR1C681L( ) EEUFR1C681( ) EEUFR1C102L( ) EEUFR1C102( ) EEUFR1C152( ) EEUFR1C152L( ) EEUFR1C182L( ) EEUFR1C222( ) EEUFR1C272( ) EEUFR1C332L EEUFR1C332S( ) EEUFR1C392L EEUFR1C392S( ) EEUFR1C472L EEUFR1C472( ) EEUFR1C562( ) EEUFR1E470( ) EEUFR1E680( ) EEUFR1E101( ) EEUFR1E151( ) EEUFR1E221( ) EEUFR1E331( ) EEUFR1E391L( ) EEUFR1E471Y( ) EEUFR1E471L( ) EEUFR1E471( ) EEUFR1E561L( ) EEUFR1E681L( ) EEUFR1E681( ) EEUFR1E821( ) EEUFR1E102( ) EEUFR1E102L( ) EEUFR1E122L( ) EEUFR1E152( ) EEUFR1E182( ) EEUFR1E182S( ) EEUFR1E222L EEUFR1E222S( ) EEUFR1E272L EEUFR1E272S( ) EEUFR1E332( ) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 2000 2000 2000 2000 1000 1000 500 1000 500 500 500 500 500 500 250 250 250 250 2000 2000 2000 2000 1000 1000 1000 1000 1000 500 1000 1000 500 500 500 500 500 500 500 250 250 250 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06 Nov. 2014 - EEE-85 - Aluminum Electrolytic Capacitors/ FR Standard Products Case size W.V. (V) 35 50 63 100 Specification Lead Length Ripple ImpedEndurLead Lead Space Cap. Dia. (20 %) Dia. Length Current ance ance Taping Taping (100 kHz) (100 kHz) Straight B H (+105 C) (+20 C) (F) (mm) (mm) (mA r.m.s.) () (hours) (mm) (mm) (mm) (mm) 33 5 11 280 0.300 5000 0.5 2.0 5.0 2.5 68 6.3 11.2 455 0.130 5000 0.5 2.5 5.0 2.5 100 8 11.5 950 0.056 6000 0.6 3.5 5.0 180 8 11.5 950 0.056 6000 0.6 3.5 5.0 220 8 11.5 950 0.056 6000 0.6 3.5 5.0 8 15 1240 0.041 8000 0.6 3.5 5.0 270 10 12.5 1290 0.043 6000 0.6 5.0 5.0 330 10 12.5 1330 0.043 5000 0.6 5.0 5.0 390 8 20 1560 0.030 9000 0.6 3.5 5.0 8 20 1560 0.030 9000 0.6 3.5 5.0 470 10 16 1790 0.028 8000 0.6 5.0 5.0 560 10 20 2180 0.020 10000 0.6 5.0 5.0 10 20 2180 0.020 10000 0.6 5.0 5.0 680 10 25 2470 0.018 10000 0.6 5.0 5.0 820 10 25 2470 0.018 10000 0.6 5.0 5.0 1000 12.5 20 2600 0.018 10000 0.6 5.0 5.0 1200 12.5 25 3190 0.015 10000 0.6 5.0 5.0 12.5 30 3630 0.013 10000 0.8 5.0 1500 16 20 3300 0.017 10000 0.8 7.5 7.5 12.5 35 3750 0.012 10000 0.8 5.0 1800 16 25 3820 0.014 10000 0.8 7.5 7.5 12.5 35 3750 0.012 10000 0.8 5.0 2200 16 25 3820 0.014 10000 0.8 7.5 7.5 4.7 5 11 185 0.620 5000 0.5 2.0 5.0 2.5 10 5 11 250 0.340 5000 0.5 2.0 5.0 2.5 22 5 11 250 0.340 5000 0.5 2.0 5.0 2.5 47 6.3 11.2 405 0.140 5000 0.5 2.5 5.0 56 6.3 11.2 405 0.140 5000 0.5 2.5 5.0 2.5 100 8 11.5 870 0.061 6000 0.6 3.5 5.0 120 8 15 1140 0.045 8000 0.6 3.5 5.0 150 10 12.5 1170 0.042 6000 0.6 5.0 5.0 180 8 20 1430 0.033 9000 0.6 3.5 5.0 220 10 16 1650 0.030 8000 0.6 5.0 5.0 270 10 20 1890 0.023 10000 0.6 5.0 5.0 330 10 25 2150 0.022 10000 0.6 5.0 5.0 470 12.5 20 2260 0.022 10000 0.6 5.0 5.0 560 12.5 25 2660 0.018 10000 0.6 5.0 5.0 680 12.5 30 3160 0.016 10000 0.8 5.0 12.5 35 3270 0.014 10000 0.8 5.0 820 16 20 2870 0.019 10000 0.8 7.5 7.5 1000 16 25 3320 0.016 10000 0.8 7.5 7.5 18 5 11 175 0.510 5000 0.5 2.0 5.0 2.5 47 6.3 11.2 284 0.210 5000 0.5 2.5 5.0 2.5 82 8 11.5 566 0.092 6000 0.6 3.5 5.0 8 15 741 0.068 8000 0.6 3.5 5.0 100 10 12.5 761 0.063 6000 0.6 5.0 5.0 8 20 930 0.050 9000 0.6 3.5 5.0 120 10 16 1073 0.045 8000 0.6 5.0 5.0 8 20 930 0.050 9000 0.6 3.5 5.0 150 10 16 1073 0.045 8000 0.6 5.0 5.0 180 10 20 1229 0.035 10000 0.6 5.0 5.0 220 10 25 1500 0.033 10000 0.6 5.0 5.0 10 20 1229 0.035 10000 0.6 5.0 5.0 270 10 25 1500 0.033 10000 0.6 5.0 5.0 12.5 20 1582 0.033 10000 0.6 5.0 5.0 330 12.5 20 1582 0.033 10000 0.6 5.0 5.0 390 12.5 25 1995 0.027 10000 0.6 5.0 5.0 470 12.5 25 1995 0.027 10000 0.6 5.0 5.0 12.5 30 2528 0.024 10000 0.8 5.0 560 16 20 2153 0.029 10000 0.8 7.5 7.5 680 12.5 35 2780 0.021 10000 0.8 5.0 820 16 25 2988 0.024 10000 0.8 7.5 7.5 100 10 20 1500 0.084 10000 0.6 5.0 5.0 Min. Packaging Q'ty Part No. EEUFR1V330( ) EEUFR1V680( ) EEUFR1V101( ) EEUFR1V181( ) EEUFR1V221( ) EEUFR1V271L( ) EEUFR1V271( ) EEUFR1V331U( ) EEUFR1V391L( ) EEUFR1V471L( ) EEUFR1V471( ) EEUFR1V561( ) EEUFR1V681( ) EEUFR1V681L( ) EEUFR1V821L( ) EEUFR1V102( ) EEUFR1V122( ) EEUFR1V152L EEUFR1V152S( ) EEUFR1V182L EEUFR1V182( ) EEUFR1V222L EEUFR1V222( ) EEUFR1H4R7( ) EEUFR1H100( ) EEUFR1H220( ) EEUFR1H470( ) EEUFR1H560( ) EEUFR1H101( ) EEUFR1H121L( ) EEUFR1H151( ) EEUFR1H181L( ) EEUFR1H221( ) EEUFR1H271( ) EEUFR1H331L( ) EEUFR1H471( ) EEUFR1H561( ) EEUFR1H681L EEUFR1H821L EEUFR1H821S( ) EEUFR1H102( ) EEUFR1J180( ) EEUFR1J470( ) EEUFR1J820( ) EEUFR1J101L( ) EEUFR1J101( ) EEUFR1J121L( ) EEUFR1J121( ) EEUFR1J151L( ) EEUFR1J151( ) EEUFR1J181( ) EEUFR1J221L( ) EEUFR1J271U( ) EEUFR1J271L( ) EEUFR1J271( ) EEUFR1J331( ) EEUFR1J391( ) EEUFR1J471( ) EEUFR1J561L EEUFR1J561S( ) EEUFR1J681L EEUFR1J821( ) EEUFR2A101( ) Straight Taping Leads (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 200 (pcs) 2000 2000 1000 1000 1000 1000 500 500 1000 1000 500 500 500 500 500 500 500 250 250 250 2000 2000 2000 2000 2000 1000 1000 500 1000 500 500 500 500 500 250 250 2000 2000 1000 1000 500 1000 500 1000 500 500 500 500 500 500 500 500 500 250 250 500 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 06 Nov. 2014 - EEE-86 - Aluminum Electrolytic Capacitors/ EB Radial Lead Type Series: EB Type: A Features Endurance : +105 C 5000 h to 10000 h Hight ripple hight frequency (Hight Voltage) RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance -40 C to +105 C 10 V.DC to 63 V.DC 2.2 F to 3300 F -25 C to +105 C 160 V.DC to 450 V.DC 10 F to 330 F 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes application of rated working voltage at +20 C (Whichever is greater) DC Leakage Current tan d Please see the attached standard products list After following life test with DC voltage and +105 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors are restord to 20 C, the capacitors shall meet the limits specified below. (10 to 63 V.DC) Duration : 05x11 to 08x11.5 : 5000 hours 08x15 to 012.5x25 : 10000 hours Capacitance change tan d DC leakage current Endurance 30 % of initial measured value < 300 % of initial specified value < initial specified value (160 to 450 V.DC) Duration : 5000 hours Capacitance change 20 % of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current (10 ~ 63 V.DC) Frequency (Hz) 2.2 22 1000 to 10 to 470 to 3300 Frequency (Hz) 60 120 1k 10 k 100 k W. V. (V. DC) 120 1k 0.75 1.00 1.40 1.55 1.65 160 to 250 0.55 0.85 0.90 1.00 0.85 1.00 1.20 1.25 1.30 350 to 450 0.50 0.80 0.90 1.00 0.95 1.00 1.05 1.10 1.15 Capacitance (F) 10 k to 30k 30 k to 100k Dimensions in mm (not to scale) fd0.05 Sleeve Pressure relief 06.3 (Unit : mm) 08 010 + L= 14 min. 0D0.5 3 min. F0.5 - 0D0.5 = L16 : L1.0 (08L15 only L1.5) L20 : L2.0 Body Dia. 0D Lead Dia. 0d Lead space F 5 0.5 2.0 6.3 0.5 2.5 8 0.6 3.5 10 0.6 5.0 12.5 0.6 5.0 16 0.8 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 - EEE-87 - 18 0.8 7.5 Jun. 2014 Aluminum Electrolytic Capacitors/ EB Standard Products Endurance : 105 C 05x11 to 08x11.5=5000 h, 05x15 to 06.3x15=7000 h, 08x15 to 012.5x25=10000 h Case size Specification Lead Length Ripple tan d Endur- Lead Lead Space Cap. W.V. ance Dia. (20 %) Dia. Length Current Taping Taping (120 Hz) (120 Hz) Straight B H (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) 5 15 105 0.30 7000 0.5 2.0 5.0 2.5 100 5 11 66 0.30 5000 0.5 2.0 5.0 2.5 6.3 15 152 0.30 7000 0.5 2.5 5.0 2.5 220 6.3 11.2 100 0.30 5000 0.5 2.5 5.0 2.5 10 8 15 278 0.30 10000 0.6 3.5 5.0 470 8 11.5 180 0.30 5000 0.6 3.5 5.0 2200 12.5 20 540 0.32 10000 0.6 5.0 5.0 3300 12.5 25 802 0.34 10000 0.6 5.0 5.0 1000 10 20 430 0.25 10000 0.6 5.0 5.0 16 2200 12.5 25 706 0.27 10000 0.6 5.0 5.0 5 15 78 0.22 7000 0.5 2.0 5.0 2.5 47 5 11 55 0.22 5000 0.5 2.0 5.0 2.5 6.3 15 135 0.22 7000 0.5 2.5 5.0 2.5 100 6.3 11.2 95 0.22 5000 0.5 2.5 5.0 2.5 25 220 8 11.5 125 0.22 5000 0.6 3.5 5.0 330 8 15 255 0.22 10000 0.6 3.5 5.0 470 10 16 321 0.22 10000 0.6 5.0 5.0 1000 12.5 20 498 0.22 10000 0.6 5.0 5.0 5 15 66 0.18 7000 0.5 2.0 5.0 2.5 33 5 11 46 0.18 5000 0.5 2.0 5.0 2.5 220 8 15 197 0.18 10000 0.6 3.5 5.0 35 330 10 16 278 0.18 10000 0.6 5.0 5.0 470 10 20 349 0.18 10000 0.6 5.0 5.0 1000 12.5 25 586 0.18 10000 0.6 5.0 5.0 0.47 5 11 4 0.15 5000 0.5 2.0 5.0 2.5 1 5 11 8 0.15 5000 0.5 2.0 5.0 2.5 2.2 5 11 15 0.15 5000 0.5 2.0 5.0 2.5 3.3 5 11 18 0.15 5000 0.5 2.0 5.0 2.5 4.7 5 11 18 0.15 5000 0.5 2.0 5.0 2.5 10 5 11 27 0.15 5000 0.5 2.0 5.0 2.5 5 15 55 0.15 7000 0.5 2.0 5.0 2.5 50 22 5 11 39 0.15 5000 0.5 2.0 5.0 2.5 6.3 15 87 0.15 7000 0.5 2.5 5.0 2.5 47 6.3 11.2 61 0.15 5000 0.5 2.5 5.0 2.5 100 8 11.5 99 0.15 5000 0.6 3.5 5.0 220 10 16 234 0.15 10000 0.6 5.0 5.0 330 10 20 293 0.15 10000 0.6 5.0 5.0 470 12.5 20 370 0.15 10000 0.6 5.0 5.0 5 15 6 0.12 7000 0.5 2.0 5.0 2.5 0.47 5 11 4.5 0.12 5000 0.5 2.0 5.0 2.5 5 15 12 0.12 7000 0.5 2.0 5.0 2.5 1 5 11 9 0.12 5000 0.5 2.0 5.0 2.5 2.2 5 11 16.5 0.12 5000 0.5 2.0 5.0 2.5 5 15 30 0.12 7000 0.5 2.0 5.0 2.5 3.3 5 11 20 0.12 5000 0.5 2.0 5.0 2.5 5 15 30 0.12 7000 0.5 2.0 5.0 2.5 4.7 5 11 23 0.12 5000 0.5 2.0 5.0 2.5 5 15 46 0.12 7000 0.5 2.0 5.0 2.5 10 63 5 11 30 0.12 5000 0.5 2.0 5.0 2.5 6.3 15 55 0.12 7000 0.5 2.5 5.0 2.5 22 6.3 11.2 40 0.12 5000 0.5 2.5 5.0 2.5 6.3 15 71 0.12 7000 0.5 2.5 5.0 2.5 33 6.3 11.2 50 0.12 5000 0.5 2.5 5.0 2.5 8 15 94 0.12 10000 0.6 3.5 5.0 47 8 11.5 80 0.12 5000 0.6 3.5 5.0 100 8 15 180 0.12 10000 0.6 3.5 5.0 220 10 20 292 0.12 10000 0.6 5.0 5.0 330 12.5 20 381 0.12 10000 0.6 5.0 5.0 470 12.5 25 454 0.12 10000 0.6 5.0 5.0 Min. Packaging Q'ty Part No. EEUEB1A101( ) EEUEB1A101S( ) EEUEB1A221( ) EEUEB1A221S( ) EEUEB1A471( ) EEUEB1A471S( ) EEUEB1A222( ) EEUEB1A332( ) EEUEB1C102( ) EEUEB1C222( ) EEUEB1E470( ) EEUEB1E470S( ) EEUEB1E101( ) EEUEB1E101S( ) EEUEB1E221S( ) EEUEB1E331( ) EEUEB1E471( ) EEUEB1E102( ) EEUEB1V330( ) EEUEB1V330S( ) EEUEB1V221( ) EEUEB1V331( ) EEUEB1V471( ) EEUEB1V102( ) EEUEB1HR47S( ) EEUEB1H1R0S( ) EEUEB1H2R2S( ) EEUEB1H3R3S( ) EEUEB1H4R7S( ) EEUEB1H100S( ) EEUEB1H220( ) EEUEB1H220S( ) EEUEB1H470( ) EEUEB1H470S( ) EEUEB1H101S( ) EEUEB1H221( ) EEUEB1H331( ) EEUEB1H471( ) EEUEB1JR47( ) EEUEB1JR47S( ) EEUEB1J1R0( ) EEUEB1J1R0S( ) EEUEB1J2R2S( ) EEUEB1J3R3( ) EEUEB1J3R3S( ) EEUEB1J4R7( ) EEUEB1J4R7S( ) EEUEB1J100( ) EEUEB1J100S( ) EEUEB1J220( ) EEUEB1J220S( ) EEUEB1J330( ) EEUEB1J330S( ) EEUEB1J470( ) EEUEB1J470S( ) EEUEB1J101( ) EEUEB1J221( ) EEUEB1J331( ) EEUEB1J471( ) Straight Taping Leads (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 (pcs) 2000 2000 2000 2000 1000 1000 500 500 500 500 2000 2000 2000 2000 1000 1000 500 500 2000 2000 1000 500 500 500 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 500 500 500 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 500 500 500 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Please kindly accept last shipment : 30/Jun/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 - EEE-88 - Jun. 2014 Aluminum Electrolytic Capacitors/ EB Standard Products Endurance : 105 C 5000 h Case size W.V. (V) Cap. (20 %) (F) 22 33 47 68 160 100 150 220 330 22 33 47 68 200 100 150 220 22 33 47 250 68 100 150 10 22 33 350 47 68 100 10 22 400 33 47 10 22 450 33 47 Dia. (mm) 10 10 12.5 12.5 16 16 18 16 18 16 18 18 10 12.5 12.5 12.5 16 16 18 16 18 18 12.5 12.5 12.5 16 16 18 16 18 18 10 12.5 16 16 18 16 18 18 10 12.5 16 16 18 16 18 12.5 16 18 16 18 18 Specification Ripple tan d EndurCurrent ance Length (100 kHz) (120 Hz) (+105 C) (+20 C) (mm) (mA r.m.s.) (hours) 20 470 0.15 5000 20 470 0.15 5000 20 600 0.15 5000 25 750 0.15 5000 20 750 0.15 5000 25 1060 0.15 5000 20 1060 0.15 5000 31.5 1280 0.15 5000 25 1280 0.15 5000 31.5 1280 0.15 5000 25 1280 0.15 5000 31.5 1690 0.15 5000 20 470 0.15 5000 20 600 0.15 5000 20 600 0.15 5000 25 750 0.15 5000 20 750 0.15 5000 25 1060 0.15 5000 20 1060 0.15 5000 31.5 1280 0.15 5000 25 1280 0.15 5000 31.5 1690 0.15 5000 20 560 0.15 5000 20 560 0.15 5000 25 710 0.15 5000 20 710 0.15 5000 25 990 0.15 5000 20 990 0.15 5000 31.5 1200 0.15 5000 25 1200 0.15 5000 31.5 1470 0.15 5000 20 270 0.20 5000 20 350 0.20 5000 20 480 0.20 5000 25 640 0.20 5000 20 640 0.20 5000 31.5 780 0.20 5000 25 780 0.20 5000 31.5 970 0.20 5000 20 250 0.24 5000 25 410 0.24 5000 20 410 0.24 5000 25 600 0.24 5000 20 600 0.24 5000 31.5 730 0.24 5000 25 730 0.24 5000 20 310 0.24 5000 25 560 0.24 5000 20 560 0.24 5000 31.5 680 0.24 5000 25 680 0.24 5000 31.5 850 0.24 5000 Lead Length Lead Lead Space Dia. Taping Straight B (mm) 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.6 0.8 0.8 0.8 0.8 0.8 (mm) 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 7.5 7.5 7.5 7.5 7.5 (mm) 5.0 5.0 5.0 5.0 7.5 7.5 7.5 - 7.5 - 7.5 - 5.0 5.0 5.0 5.0 7.5 7.5 7.5 - 7.5 - 5.0 5.0 5.0 7.5 7.5 7.5 - 7.5 - 5.0 5.0 7.5 7.5 7.5 - 7.5 - 5.0 5.0 7.5 7.5 7.5 - 7.5 5.0 7.5 7.5 - 7.5 - Min. Packaging Q'ty Part No. EEUEB2C220( ) EEUEB2C330( ) EEUEB2C470( ) EEUEB2C680( ) EEUEB2C680S( ) EEUEB2C101( ) EEUEB2C101S( ) EEUEB2C151 EEUEB2C151S( ) EEUEB2C221 EEUEB2C221S( ) EEUEB2C331 EEUEB2D220( ) EEUEB2D330( ) EEUEB2D470( ) EEUEB2D680( ) EEUEB2D680S( ) EEUEB2D101( ) EEUEB2D101S( ) EEUEB2D151 EEUEB2D151S( ) EEUEB2D221 EEUEB2E220( ) EEUEB2E330( ) EEUEB2E470( ) EEUEB2E470S( ) EEUEB2E680( ) EEUEB2E680S( ) EEUEB2E101 EEUEB2E101S( ) EEUEB2E151 EEUEB2V100( ) EEUEB2V220( ) EEUEB2V330S( ) EEUEB2V470( ) EEUEB2V470S( ) EEUEB2V680 EEUEB2V680S( ) EEUEB2V101 EEUEB2G100( ) EEUEB2G220( ) EEUEB2G220S( ) EEUEB2G330( ) EEUEB2G330S( ) EEUEB2G470 EEUEB2G470S( ) EEUEB2W100( ) EEUEB2W220( ) EEUEB2W220S( ) EEUEB2W330( ) EEUEB2W330S( ) EEUEB2W470 Straight Taping Leads (pcs) 200 200 200 200 100 100 100 100 100 100 100 50 200 200 200 200 100 100 100 100 100 50 200 200 200 100 100 100 100 100 50 200 200 100 100 100 100 100 50 200 200 100 100 100 100 100 200 100 100 100 100 50 (pcs) 500 500 500 500 250 250 250 - 250 - 250 - 500 500 500 500 250 250 250 - 250 - 500 500 500 250 250 250 - 250 - 500 500 250 250 250 - 250 - 500 500 250 250 250 - 250 500 250 250 - 250 - * When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 - EEE-89 - Jun. 2014 Aluminum Electrolytic Capacitors/ EE Radial Lead Type Series: EE Type: A Features High ripple current (at high frequency): 40 % higher than ED Series Endurance: 105 C 8000 h to 10000 h RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current -25 C to + 105 C 160 V .DC to 450 V .DC 10 F to 330 F 20 % (120 Hz/+20 C) I < 0.06 CV +10 (A) After 2 minutes W.V. 160 200 250 350 400 450 (120 Hz/+20 C) tan d 0.15 0.15 0.15 0.20 0.24 0.24 After following life test with DC voltage and +105 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), when the capacitors are restored to 20 C, the capacitors shall meet the limits specified below. Duration 010 : 8000 hours 012.5 to 018 : 10000 hours Capacitance change 20 % of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value tan d Endurance After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current W. V. (V. DC) 160 to 450 Frequency (Hz) Cap. (F) 60 < 120 < 300 < 1k< 10 k < 100 k < 10 to 82 0.25 0.35 0.50 0.65 0.90 1.00 100 to 330 0.30 0.40 0.55 0.70 0.90 1.00 Dimensions in mm (not to scale) Sleeve Pressure relief fd0.05 (Unit : mm) + L2.0 14 min. 3 min. 0D0.5 F0.5 - Body Dia. 0D 10 12.5 16 18 Lead Dia. 0d 0.6 0.6 0.8 0.8 Lead space F 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-90 - Aluminum Electrolytic Capacitors/ EE Case size/Ripple current 160 V Cap. (F) Case size (0DxL) 200 V Ripple current (mA r.m.s.) 105 C Case size (0DxL) Ripple current (mA r.m.s.) 105 C 120 Hz 100 kHz 120 Hz 100 kHz 22 10 x 20 245 700 10 x 20 300 850 33 10 x 20 280 810 10 x 20 320 920 47 10 x 20 370 1065 68 12.5 x 20 470 1350 82 12.5 12.5 16 16 18 16 18 18 520 660 680 755 730 910 780 1040 1480 1660 1700 1890 1820 2280 1950 2600 12.5 12.5 16 16 16 18 x x x x x x 385 465 465 510 690 670 1100 1330 1330 1460 1730 1665 16 x 25 740 1860 18 x 31.5 1175 2600 18 x 40 1250 3120 100 150 220 330 x x x x x x x x 25 25 20S 25 20S 31.5 25S 31.5 20 25 20S 20S 25 20S 250 V Cap. (F) Case size (0DxL) 350 V Ripple current (mA r.m.s.) 105 C 120 Hz 100 kHz 15 22 10 x 20 275 785 33 12.5 x 20 350 995 47 12.5 x 25 16 x 20S 450 490 1290 1400 68 16 x 20S 490 1400 150 16 18 16 18 18 x x x x x 590 590 840 840 1010 1680 1680 2100 2100 2520 220 18 x 40 1175 2940 82 100 25 20S 31.5 25S 31.5 Case size (0DxL) 120 Hz Case size (0DxL) x 20 170 480 12.5 12.5 16 16 18 16 18 x x x x x x x 20 25 20S 25 20S 31.5 25S 230 275 315 375 375 535 465 660 790 900 1070 1070 1530 1330 18 x 25S 535 1530 18 x 31.5 640 1600 10 10 15 22 x 20 450 V Ripple current (mA r.m.s.) 105 C 120 Hz 100 kHz 10 400 V Cap. (F) Ripple current (mA r.m.s.) 105 C Case size (0DxL) 100 kHz 150 430 12.5 x 20 12.5 x 25 16 x 20S 205 265 300 590 760 860 33 16 x 20S 355 1020 47 16 18 x 25 x 20S 410 410 1180 1180 68 18 x 25 515 1470 82 18 x 31.5 575 1645 100 18 x 40 825 2060 56 10 x 20U 12.5 x 20 12.5 x 25 Ripple current (mA r.m.s.) 105 C 120 Hz 115 170 270 100 kHz 330 490 780 16 x 20S 330 945 16 18 16 18 18 x x x x x 350 350 420 420 480 1000 1000 1200 1200 1380 18 x 40 630 1800 25 20S 31.5 25S 31.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-91 - Aluminum Electrolytic Capacitors/ EE Standard Products Endurance : 105 C 010=8000 h, 012.5 to 018=10000 h Case size W.V. Cap. (20 %) Dia. (V) (F) (mm) 22 33 47 68 82 10 10 10 12.5 12.5 12.5 16 16 18 16 18 18 10 10 12.5 12.5 16 16 16 18 16 18 18 10 12.5 12.5 16 16 16 18 16 18 18 18 10 12.5 12.5 16 16 18 16 18 18 18 160 100 150 220 330 22 33 47 68 200 82 100 150 220 330 22 33 47 68 250 82 100 150 220 15 22 33 350 47 68 82 100 Specification Ripple tan d EndurCurrent ance Length (100 kHz) (120 Hz) (+105 C) (+20 C) (hours) (mm) (mA r.m.s.) 20 20 20 20 25 25 20 25 20 31.5 25 31.5 20 20 20 25 20 20 25 20 25 31.5 40 20 20 25 20 20 25 20 31.5 25 31.5 40 20 20 25 20 25 20 31.5 25 25 31.5 700 810 1065 1350 1480 1660 1700 1890 1820 2280 1950 2600 850 920 1100 1330 1330 1460 1730 1665 1860 2600 3120 785 995 1290 1400 1400 1680 1680 2100 2100 2520 2940 480 660 790 900 1070 1070 1530 1330 1530 1600 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 8000 8000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 8000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 10000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 Lead Length Lead Lead Space Dia. Taping Straight B (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 Min. Packaging Q'ty Part No. EEUEE2C220( ) EEUEE2C330( ) EEUEE2C470( ) EEUEE2C680( ) EEUEE2C820( ) EEUEE2C101( ) EEUEE2C101S( ) EEUEE2C151( ) EEUEE2C151S( ) EEUEE2C221 EEUEE2C221S( ) EEUEE2C331 EEUEE2D220( ) EEUEE2D330( ) EEUEE2D470( ) EEUEE2D680( ) EEUEE2D680S( ) EEUEE2D820S( ) EEUEE2D101( ) EEUEE2D101S( ) EEUEE2D151( ) EEUEE2D221 EEUEE2D331 EEUEE2E220( ) EEUEE2E330( ) EEUEE2E470( ) EEUEE2E470S( ) EEUEE2E680S( ) EEUEE2E820( ) EEUEE2E820S( ) EEUEE2E101 EEUEE2E101S( ) EEUEE2E151 EEUEE2E221 EEUEE2V150( ) EEUEE2V220( ) EEUEE2V330( ) EEUEE2V330S( ) EEUEE2V470( ) EEUEE2V470S( ) EEUEE2V680 EEUEE2V680S( ) EEUEE2V820S( ) EEUEE2V101 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 100 100 100 100 100 50 200 200 200 200 100 100 100 100 100 50 50 200 200 200 100 100 100 100 100 100 50 50 200 200 200 100 100 100 100 100 100 50 500 500 500 500 500 500 250 250 250 250 500 500 500 500 250 250 250 250 250 500 500 500 250 250 250 250 250 500 500 500 250 250 250 250 250 * When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-92 - Aluminum Electrolytic Capacitors/ EE Standard Products Endurance : 105 C 010=8000 h, 012.5 to 018=10000 h Case size W.V. Cap. (20 %) Dia. (V) (F) (mm) 10 15 10 12.5 12.5 16 16 16 18 18 18 18 10 12.5 12.5 16 16 18 16 18 18 18 22 400 33 47 68 82 100 10 15 22 450 33 47 56 68 Specification Ripple tan d EndurCurrent ance Length (100 kHz) (120 Hz) (+105 C) (+20 C) (hours) (mm) (mA r.m.s.) 20 20 25 20 20 25 20 25 31.5 40 20 20 25 20 25 20 31.5 25 31.5 40 430 590 760 860 1020 1180 1180 1470 1645 2060 330 490 780 945 1000 1000 1200 1200 1380 1800 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 0.24 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 8000 10000 10000 10000 10000 10000 10000 10000 10000 10000 Lead Length Lead Lead Space Dia. Taping Straight B (mm) (mm) (mm) 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 Min. Packaging Q'ty Part No. EEUEE2G100( ) EEUEE2G150( ) EEUEE2G220( ) EEUEE2G220S( ) EEUEE2G330S( ) EEUEE2G470( ) EEUEE2G470S( ) EEUEE2G680( ) EEUEE2G820 EEUEE2G101 EEUEE2W100U( ) EEUEE2W100( ) EEUEE2W150( ) EEUEE2W220S( ) EEUEE2W330( ) EEUEE2W330S( ) EEUEE2W470 EEUEE2W470S( ) EEUEE2W560 EEUEE2W680 Straight Taping Leads (pcs) (pcs) 200 200 200 100 100 100 100 100 50 50 200 200 200 100 100 100 100 100 50 50 500 500 500 250 250 250 250 250 500 500 500 250 250 250 250 * When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-93 - Aluminum Electrolytic Capacitors/ TA Radial Lead Type Series: TA Type: A Features Endurance: 125 C 2000 h Heat cycle: 1000 cycle -40 C to +125 C AEC-Q200 qualified RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current -40 C to + 125 C 10 V .DC to 63 V .DC 2.2 F to 4700 F 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) W.V.(V) 10 16 25 35 50 63 (120Hz / +20 C) tan d 0.20 0.16 0.14 0.12 0.10 0.09 For capacitance value > 1000 F , add 0.02 per every 1000 F. tan d After following life test with DC voltage and +125 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), for 2000 hours, when the capacitors are restored to 20 C, the capacitors, shall meet the limits specified below. Endurance Capacitance change 30% of initial measured value tan d < 300 % of initial specified value DC leakage current < initial specified value Shelf Life After storage for 1000 hours at +125 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Frequency correction factor for ripple current W.V. (V.DC) Frequency (Hz) Cap. (F) 60 120 1k 10 k 100 k 1 to 330 0.55 0.65 0.85 0.90 1.00 470 to 1000 0.70 0.75 0.90 0.95 1.00 2200 to 4700 0.75 0.80 0.90 0.95 1.00 10 to 63 Dimensions in mm (not to scale) Sleeve fd0.05 (Unit : mm) 08 010 + Pressure relief L= 14 min. 3 min. 0D0.5 F0.5 - 0D0.5 = L16 : L1.0 (016L15, 018L15 : L1.5) L20 : L2.0 Body Dia. 0D 8 10 12.5 16 18 Lead Dia. 0d 0.6 Lead space F 3.5 0.6 0.6 0.8 0.8 5.0 5.0 7.5 7.5 This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-94 - Aluminum Electrolytic Capacitors/ TA Standard Products Endurance : 125 C 2000 h Case size W.V. (V) Cap. (20 %) (F) (mm) 330 470 8 10 10 12.5 12.5 16 18 16 18 16 18 8 10 10 12.5 16 16 18 16 18 18 8 10 10 10 12.5 12.5 16 18 16 18 18 10 10 10 12.5 16 16 18 18 1000 10 2200 3300 4700 220 330 470 1000 16 2200 3300 4700 100 220 330 470 25 1000 2200 3300 100 220 330 35 Dia. 470 1000 2200 Specification Ripple ImpedCurrent ance Length (100 kHz) (100 kHz) (+125 C) (+20 C) (mm) (mA r.m.s.) () 11.5 12.5 20 15 25 20 15 25 20 31.5 25 11.5 12.5 16 20 15 25 20 31.5 25 31.5 11.5 12.5 16 20 15 25 20 15 31.5 25 35.5 12.5 16 20 20 15 25 20 35.5 500 680 1100 1085 1750 1985 1800 2300 2250 2710 2470 500 680 945 1490 1520 2300 2250 2710 2470 3270 500 680 945 1100 1085 1750 1985 1800 2710 2470 3310 555 765 930 1330 1450 2010 2180 2790 0.130 0.100 0.057 0.070 0.033 0.032 0.042 0.024 0.031 0.020 0.022 0.130 0.100 0.075 0.042 0.047 0.024 0.031 0.020 0.022 0.018 0.130 0.100 0.075 0.057 0.070 0.033 0.032 0.042 0.020 0.022 0.017 0.180 0.130 0.100 0.070 0.088 0.037 0.046 0.025 Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping B (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 3.5 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 3.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 Part No. Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 100 100 100 100 100 100 200 200 200 200 100 100 100 100 100 50 200 200 200 200 200 200 100 100 100 100 50 200 200 200 200 100 100 100 50 1000 500 500 500 500 250 250 250 250 EEUTA1A331( ) EEUTA1A471( ) EEUTA1A102( ) EEUTA1A102S( ) EEUTA1A222L( ) EEUTA1A222( ) EEUTA1A222S( ) EEUTA1A332( ) EEUTA1A332S( ) EEUTA1A472 EEUTA1A472S( ) EEUTA1C221( ) EEUTA1C331( ) EEUTA1C471( ) EEUTA1C102( ) EEUTA1C102S( ) EEUTA1C222( ) EEUTA1C222S( ) EEUTA1C332 EEUTA1C332S( ) EEUTA1C472 EEUTA1E101( ) EEUTA1E221( ) EEUTA1E331( ) EEUTA1E471( ) EEUTA1E471S( ) EEUTA1E102L( ) EEUTA1E102( ) EEUTA1E102S( ) EEUTA1E222 EEUTA1E222S( ) EEUTA1E332 EEUTA1V101( ) EEUTA1V221( ) EEUTA1V331( ) EEUTA1V471( ) EEUTA1V471S( ) EEUTA1V102( ) EEUTA1V102S( ) EEUTA1V222 250 1000 500 500 500 250 250 250 250 1000 500 500 500 500 500 250 250 250 500 500 500 500 250 250 250 * When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-95 - Aluminum Electrolytic Capacitors/ TA Standard Products Endurance : 125 C 2000 h Case size W.V. (V) 50 Cap. (20 %) (F) (mm) 1 10 22 33 47 100 220 8 8 8 8 8 10 10 12.5 16 12.5 16 18 16 18 8 10 10 10 12.5 16 18 16 18 16 18 330 470 1000 22 33 47 100 63 Dia. 220 330 470 Specification Ripple ImpedCurrent ance Length (100 kHz) (100 kHz) (+125 C) (+20 C) (mm) (mA r.m.s.) () 11.5 11.5 11.5 11.5 11.5 12.5 20 20 15 25 20 15 31.5 25 11.5 12.5 16 20 25 20 15 25 20 31.5 25 35 180 250 300 440 555 930 1330 1450 1650 1650 1710 2430 2350 310 410 460 680 1325 1360 1300 1660 1760 2055 1990 2.00 0.950 0.650 0.450 0.350 0.180 0.100 0.070 0.088 0.055 0.053 0.075 0.031 0.032 0.470 0.360 0.270 0.205 0.100 0.085 0.120 0.070 0.077 0.060 0.060 Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping B (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.6 0.8 0.8 0.8 0.8 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.8 0.8 3.5 3.5 3.5 3.5 3.5 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 7.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 7.5 Part No. Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 100 200 100 100 100 100 200 200 200 200 200 100 100 100 100 100 100 1000 1000 1000 1000 1000 500 500 500 250 500 250 250 EEUTA1H1R0( ) EEUTA1H100( ) EEUTA1H220( ) EEUTA1H330( ) EEUTA1H470S( ) EEUTA1H101( ) EEUTA1H221( ) EEUTA1H331( ) EEUTA1H331S( ) EEUTA1H471L( ) EEUTA1H471( ) EEUTA1H471S( ) EEUTA1H102 EEUTA1H102S( ) EEUTA1J220( ) EEUTA1J330( ) EEUTA1J470( ) EEUTA1J101( ) EEUTA1J221L( ) EEUTA1J221( ) EEUTA1J221S( ) EEUTA1J331( ) EEUTA1J331S( ) EEUTA1J471 EEUTA1J471S( ) 250 1000 500 500 500 500 250 250 250 250 250 * When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-96 - Aluminum Electrolytic Capacitors/ TP Radial Lead Type Series: TP Type: A Features Endurance: 125 C 2000 h to 5000 h or 135 C 1000 h to 2000 h Smaller than series TA High ripple current (at high frequency) : 20 to 40% higher than TA series AEC-Q200 qualified RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current -40 C to + 135 C 25 V .DC to 35 V .DC 100 F to 5100 F 20 % (120 Hz/+20 C) I < 0.01 CV After 2 minutes W.V.(V) 25 35 (120Hz / +20 C) tan d 0.14 0.12 For capacitance value > 1000 F , add 0.02 per every 1000 F. After following life test with DC voltage and +125 C2 C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 C, the capacitors shall meet the limits specified below. Duration 08 : 2000 hours, 010 : 3000 hours, 012.5 : 4000 hours, 016 to 018 : 5000 hours Capacitance change 30% of initial measured value tan d < 300 % of initial specified value DC leakage current < initial specified value After following life test with DC voltage and +135 C2 C ripple current value applied. (The sum of DC and ripple peak voltage shall not exceed the rated working voltage) when the capacitors are restored to 20 C, the capacitors shall meet the limits specified below. Duration 08 : 1000 hours, 010 to 018 : 2000 hours Capacitance change 30% of initial measured value tan d < 300 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +125 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) After storage for 1000 hours at +135 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) tan d Endurance 1 Endurance 2 Shelf Life 1 Shelf Life 2 Frequency correction factor for ripple current W.V. (V.DC) Cap. (F) 25 to 35 to to to 390 1200 60 0.55 0.70 0.75 330 1000 120 0.65 0.75 0.80 Frequency (Hz) 1k 0.85 0.90 0.90 10 k 0.90 0.95 0.95 Dimensions in mm (not to scale) (Unit : mm) fd0.05 Sleeve 100 k 1.00 1.00 1.00 08 010 + Pressure relief L= = L16 : L1.5 L20 : L2.0 Body Dia. 0D Lead Dia. 0d Lead space F 8 0.6 3.5 14 min. 3 min. 10 0.6 5.0 0D0.5 12.5 0.6 5.0 F0.5 - 0D0.5 16 0.8 7.5 18 0.8 7.5 This product qualify for AEC-Q200, but it has some deviations. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-97 - Aluminum Electrolytic Capacitors/ TP Standard Products Case size W.V. (V) 25 35 Cap. (20 %) Dia. Length (F) (mm) (mm) 220 10 12.5 330 10 16 8 20 470 10 16 510 10 16 820 10 20 1000 12.5 20 1200 12.5 20 12.5 25 1800 16 20 2000 16 20 16 25 2200 18 20 16 25 2700 18 20 16 31.5 3300 18 25 16 31.5 3900 18 25 4700 18 31.5 5100 18 31.5 100 10 12.5 120 10 12.5 8 20 220 10 16 8 20 270 10 16 330 10 20 390 10 20 470 12.5 20 560 12.5 20 620 12.5 20 820 12.5 25 1000 16 20 1200 16 20 16 25 1500 18 20 1600 16 25 16 31.5 1800 18 25 16 31.5 2000 18 25 2200 18 31.5 2700 18 31.5 Specification Ripple Ripple Current Current (100 kHz) (100 kHz) (+125 C) (+135 C) (mA r.m.s.) (mA r.m.s.) 580 500 1100 945 1060 760 1100 945 1100 945 1540 1100 1860 1490 1860 1490 2180 1750 2380 1985 2380 1985 2760 2300 2700 2250 2760 2300 2700 2250 3250 2710 2960 2470 3250 2710 2960 2470 3480 2900 3480 2900 580 500 580 500 1060 760 1100 945 1060 760 1100 945 1540 1100 1540 1100 1860 1490 1860 1490 1860 1490 2180 1750 2380 1985 2380 1985 2760 2300 2700 2250 2760 2300 3250 2710 2960 2470 3250 2710 2960 2470 3480 2900 3480 2900 Lead Length Lead Space E.S.R tan d Lead 125 C 135 C Dia. (100 kHz) (120 kHz) Taping Enduance Enduance Straight (+20 C) (+20 C) B () 0.190 0.130 0.067 0.130 0.130 0.052 0.038 0.038 0.030 0.029 0.029 0.022 0.028 0.022 0.028 0.018 0.020 0.018 0.020 0.016 0.016 0.190 0.190 0.067 0.130 0.067 0.130 0.052 0.052 0.038 0.038 0.038 0.030 0.029 0.029 0.022 0.028 0.022 0.018 0.020 0.018 0.020 0.016 0.016 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.16 0.16 0.16 0.16 0.18 0.18 0.18 0.18 0.20 0.22 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.12 0.14 0.14 0.14 0.14 (hours) 3000 3000 2000 3000 3000 3000 4000 4000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 3000 3000 2000 3000 2000 3000 3000 3000 4000 4000 4000 4000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 5000 Min. Packaging Q'ty Part No. : Substandard (E24series numbers) (hours) (mm) (mm) (mm) 2000 0.6 5.0 5.0 EEUTP1E221( ) 2000 0.6 5.0 5.0 EEUTP1E331( ) 1000 0.6 3.5 5.0 EEUTP1E471L( ) 2000 0.6 5.0 5.0 EEUTP1E471( ) 2000 0.6 5.0 5.0 EEUTP1E511( ) 2000 0.6 5.0 5.0 EEUTP1E821( ) 2000 0.6 5.0 5.0 EEUTP1E102( ) 2000 0.6 5.0 5.0 EEUTP1E122( ) 2000 0.6 5.0 5.0 EEUTP1E182( ) 2000 0.8 7.5 7.5 EEUTP1E182S( ) 2000 0.8 7.5 7.5 EEUTP1E202S( ) 2000 0.8 7.5 7.5 EEUTP1E222( ) 2000 0.8 7.5 7.5 EEUTP1E222S( ) 2000 0.8 7.5 7.5 EEUTP1E272( ) 2000 0.8 7.5 7.5 EEUTP1E272S( ) 2000 0.8 7.5 EEUTP1E332 2000 0.8 7.5 7.5 EEUTP1E332S( ) 2000 0.8 7.5 EEUTP1E392 2000 0.8 7.5 7.5 EEUTP1E392S( ) 2000 0.8 7.5 EEUTP1E472 2000 0.8 7.5 EEUTP1E512 2000 0.6 5.0 5.0 EEUTP1V101( ) 2000 0.6 5.0 5.0 EEUTP1V121( ) 1000 0.6 3.5 5.0 EEUTP1V221L( ) 2000 0.6 5.0 5.0 EEUTP1V221( ) 1000 0.6 3.5 5.0 EEUTP1V271L( ) 2000 0.6 5.0 5.0 EEUTP1V271( ) 2000 0.6 5.0 5.0 EEUTP1V331( ) 2000 0.6 5.0 5.0 EEUTP1V391( ) 2000 0.6 5.0 5.0 EEUTP1V471( ) 2000 0.6 5.0 5.0 EEUTP1V561( ) 2000 0.6 5.0 5.0 EEUTP1V621( ) 2000 0.6 5.0 5.0 EEUTP1V821( ) 2000 0.8 7.5 7.5 EEUTP1V102( ) 2000 0.8 7.5 7.5 EEUTP1V122( ) 2000 0.8 7.5 7.5 EEUTP1V152( ) 2000 0.8 7.5 7.5 EEUTP1V152S( ) 2000 0.8 7.5 7.5 EEUTP1V162( ) 2000 0.8 7.5 EEUTP1V182 2000 0.8 7.5 7.5 EEUTP1V182S( ) 2000 0.8 7.5 EEUTP1V202 2000 0.8 7.5 7.5 EEUTP1V202S( ) 2000 0.8 7.5 EEUTP1V222 2000 0.8 7.5 EEUTP1V272 Straight Taping Leads (pcs) 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 100 50 50 200 200 200 200 200 200 200 200 200 200 200 200 100 100 100 100 100 100 100 100 100 50 50 (pcs) 500 500 1000 500 500 500 500 500 500 250 250 250 250 250 250 250 250 500 500 1000 500 1000 500 500 500 500 500 500 500 250 250 250 250 250 250 250 * When requesting taped product, please put the letter "B" between the "( )". Lead wire pitch B=5 mm, 7.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-98 - Aluminum Electrolytic Capacitors/ NHG Radial Lead Type Series: NHG Type: A Features Endurance : 105 C 1000 h to 2000 h RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance -55 C to +105 C 6.3 V.DC to 100 V.DC 2.2 F to 22000 F -25 C to +105 C 160 V.DC to 450 V.DC 1 F to 330 F 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (Which is greater) DC Leakage Current tan d I < 0.06 CV +10 (A) After 2 minutes Please see the attached standard products list After following life test with DC voltage and +105 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors are restored to 20 C, the capacitors shall meet the limits specified below. Duration : 6.3 V.DC to 100 V.DC : (05 to 08)=1000 hours, (010 to 018)=2000 hours 160 V.DC to 450 V.DC : 2000 hours Endurance Capacitance change 20 % of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current W.V.(V.DC) Frequency (Hz) Cap. (F) 60 120 1k 10 k 100 k 33 0.75 1.00 1.55 1.80 2.00 470 0.80 1.00 1.35 1.50 1.50 to 22000 0.85 1.00 1.10 1.15 1.15 to 0.80 1.00 1.35 1.50 1.50 2.2 to 6.3 to 100 47 1000 160 to 450 1 to 330 Dimensions in mm (not to scale) fd0.05 (Unit : mm) Sleeve Pressure relief 06.3 08 010 + L= 14 min. 0D0.5 3 min. F0.5 - 0D0.5 = L16 : L1.0 L20 : L2.0 Body Dia. 0D 5 6.3 8 10 12.5 16 18 Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-99 - Aluminum Electrolytic Capacitors/ NHG Standard Products Case size W.V. (V) 6.3 10 16 25 35 Cap. (20 %) Dia. (F) (mm) 220 5 470 6.3 1000 8 2200 10 3300 10 4700 12.5 6800 12.5 10000 16 15000 16 22000 18 330 6.3 470 8 1000 10 2200 10 3300 12.5 4700 12.5 6800 16 10000 16 15000 18 100 5 220 6.3 330 8 470 8 1000 10 2200 12.5 3300 12.5 4700 16 6800 16 10000 18 47 5 100 6.3 220 8 330 8 470 10 1000 10 2200 12.5 3300 16 4700 16 6800 18 47 5 100 6.3 220 8 330 10 470 10 1000 12.5 2200 16 3300 16 4700 18 Specification Lead Length Ripple tan d Endur- Lead Lead Space Current ance Dia. Length Taping Taping (120 Hz) (120 Hz) Straight B i (+105 C) (+20 C) (hours) (mm) (mm) (mm) (mm) (mm) (mA r.m.s.) 11 140 0.28 1000 0.5 2.0 5.0 2.5 11.2 230 0.28 1000 0.5 2.5 5.0 2.5 11.5 380 0.28 1000 0.6 3.5 5.0 16 710 0.30 2000 0.6 5.0 5.0 20 840 0.32 2000 0.6 5.0 5.0 20 1090 0.34 2000 0.6 5.0 5.0 25 1350 0.38 2000 0.6 5.0 5.0 25 1650 0.46 2000 0.8 7.5 7.5 31.5 2010 0.56 2000 0.8 7.5 35.5 2350 0.70 2000 0.8 7.5 11.2 200 0.24 1000 0.5 2.5 5.0 2.5 11.5 250 0.24 1000 0.6 3.5 5.0 12.5 460 0.24 2000 0.6 5.0 5.0 20 760 0.26 2000 0.6 5.0 5.0 20 1000 0.28 2000 0.6 5.0 5.0 25 1260 0.30 2000 0.6 5.0 5.0 25 1570 0.34 2000 0.8 7.5 7.5 31.5 1890 0.42 2000 0.8 7.5 35.5 2180 0.52 2000 0.8 7.5 11 110 0.20 1000 0.5 2.0 5.0 2.5 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 11.5 260 0.20 1000 0.6 3.5 5.0 11.5 310 0.20 1000 0.6 3.5 5.0 16 560 0.20 2000 0.6 5.0 5.0 20 920 0.22 2000 0.6 5.0 5.0 25 1170 0.24 2000 0.6 5.0 5.0 25 1480 0.26 2000 0.8 7.5 7.5 31.5 1780 0.30 2000 0.8 7.5 35.5 2060 0.38 2000 0.8 7.5 11 91 0.16 1000 0.5 2.0 5.0 2.5 11.2 130 0.16 1000 0.5 2.5 5.0 2.5 11.5 230 0.16 1000 0.6 3.5 5.0 11.5 310 0.16 1000 0.6 3.5 5.0 12.5 380 0.16 2000 0.6 5.0 5.0 20 680 0.16 2000 0.6 5.0 5.0 25 1090 0.18 2000 0.6 5.0 5.0 25 1400 0.20 2000 0.8 7.5 7.5 31.5 1750 0.22 2000 0.8 7.5 35.5 2040 0.26 2000 0.8 7.5 11 90 0.14 1000 0.5 2.0 5.0 2.5 11.2 150 0.14 1000 0.5 2.5 5.0 2.5 11.5 270 0.14 1000 0.6 3.5 5.0 12.5 350 0.14 2000 0.6 5.0 5.0 16 460 0.14 2000 0.6 5.0 5.0 20 810 0.14 2000 0.6 5.0 5.0 25 1260 0.16 2000 0.8 7.5 7.5 31.5 1610 0.18 2000 0.8 7.5 35.5 1910 0.20 2000 0.8 7.5 Min. Packaging Q'ty Part No. ECA0JHG221( ) ECA0JHG471( ) ECA0JHG102( ) ECA0JHG222( ) ECA0JHG332( ) ECA0JHG472( ) ECA0JHG682( ) ECA0JHG103( ) ECA0JHG153 ECA0JHG223 ECA1AHG331( ) ECA1AHG471( ) ECA1AHG102( ) ECA1AHG222( ) ECA1AHG332( ) ECA1AHG472( ) ECA1AHG682( ) ECA1AHG103 ECA1AHG153 ECA1CHG101( ) ECA1CHG221( ) ECA1CHG331( ) ECA1CHG471( ) ECA1CHG102( ) ECA1CHG222( ) ECA1CHG332( ) ECA1CHG472( ) ECA1CHG682 ECA1CHG103 ECA1EHG470( ) ECA1EHG101( ) ECA1EHG221( ) ECA1EHG331( ) ECA1EHG471( ) ECA1EHG102( ) ECA1EHG222( ) ECA1EHG332( ) ECA1EHG472 ECA1EHG682 ECA1VHG470( ) ECA1VHG101( ) ECA1VHG221( ) ECA1VHG331( ) ECA1VHG471( ) ECA1VHG102( ) ECA1VHG222( ) ECA1VHG332 ECA1VHG472 Straight Taping Leads (pcs) 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 100 100 50 (pcs) 2000 2000 1000 500 500 500 500 250 2000 1000 500 500 500 500 250 2000 2000 1000 1000 500 500 500 250 2000 2000 1000 1000 500 500 500 250 2000 2000 1000 500 500 500 250 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-100 - Aluminum Electrolytic Capacitors/ NHG Standard Products Case size Specification Lead Length Ripple tan d Endur- Lead Lead Space Cap. W.V. ance Dia. (20 %) Dia. Length Current Taping Taping (120 Hz) (120 Hz) Straight B i (+105 C) (+20 C) (hours) (mm) (mm) (mm) (mm) (V) (F) (mm) (mm) (mA r.m.s.) 0.1 50 63 100 5 11 1.1 0.12 1000 0.5 2.0 5.0 Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) (pcs) 2.5 ECA1HHG0R1( ) 200 2000 0.22 5 11 2.3 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHGR22( ) 200 2000 0.33 5 11 3.5 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHGR33( ) 200 2000 0.47 5 11 5 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHGR47( ) 200 2000 1 5 11 10 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG010( ) 200 2000 2.2 5 11 18 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG2R2( ) 200 2000 3.3 5 11 22 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG3R3( ) 200 2000 4.7 5 11 26 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG4R7( ) 200 2000 10 5 11 39 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG100( ) 200 2000 22 5 11 65 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG220( ) 200 2000 33 5 11 90 0.12 1000 0.5 2.0 5.0 2.5 ECA1HHG330( ) 200 2000 47 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5 ECA1HHG470( ) 200 2000 100 8 11.5 180 0.12 1000 0.6 3.5 5.0 ECA1HHG101( ) 200 1000 220 10 12.5 300 0.12 2000 0.6 5.0 5.0 ECA1HHG221( ) 200 500 330 10 16 410 0.12 2000 0.6 5.0 5.0 ECA1HHG331( ) 200 500 470 10 20 530 0.12 2000 0.6 5.0 5.0 ECA1HHG471( ) 200 500 5.0 ECA1HHG102( ) 200 500 ECA1HHG222 100 1000 12.5 25 950 0.12 2000 0.6 5.0 2200 16 31.5 1470 0.14 2000 0.8 7.5 3300 18 35.5 1770 0.16 2000 0.8 7.5 10 5 11 46 0.10 1000 0.5 2.0 ECA1HHG332 50 5.0 2.5 ECA1JHG100( ) 200 2000 22 5 11 71 0.10 1000 0.5 2.0 5.0 2.5 ECA1JHG220( ) 200 2000 33 6.3 11.2 100 0.10 1000 0.5 2.5 5.0 2.5 ECA1JHG330( ) 200 2000 2.5 47 6.3 11.2 120 0.10 1000 0.5 2.5 5.0 ECA1JHG470( ) 200 2000 100 10 12.5 215 0.10 2000 0.6 5.0 5.0 ECA1JHG101( ) 200 500 220 10 16 335 0.10 2000 0.6 5.0 5.0 ECA1JHG221( ) 200 500 330 10 20 510 0.10 2000 0.6 5.0 5.0 ECA1JHG331( ) 200 500 470 12.5 20 640 0.10 2000 0.6 5.0 5.0 ECA1JHG471( ) 200 500 930 0.10 2000 0.8 7.5 7.5 ECA1JHG102( ) 100 250 1610 0.12 2000 0.8 7.5 1000 16 25 2200 18 35.5 ECA1JHG222 50 0.47 5 11 9 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHGR47( ) 200 2000 1 5 11 14 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG010( ) 200 2000 2.2 5 11 21 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG2R2( ) 200 2000 3.3 5 11 31 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG3R3( ) 200 2000 4.7 5 11 38 0.08 1000 0.5 2.0 5.0 2.5 ECA2AHG4R7( ) 200 2000 10 6.3 11.2 54 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG100( ) 200 2000 22 6.3 11.2 93 0.08 1000 0.5 2.5 5.0 2.5 ECA2AHG220( ) 200 2000 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-101 - Aluminum Electrolytic Capacitors/ NHG Standard Products Case size Specification Lead Length Ripple tan d Endur- Lead Lead Space Cap. W.V. ance Dia. (20 %) Dia. Length Current Taping Taping (120 Hz) (120 Hz) Straight B i (+105 C) (+20 C) (hours) (mm) (mm) (mm) (mm) (V) (F) (mm) (mm) (mA r.m.s.) 100 160 200 250 350 33 47 100 220 330 470 1000 1 2.2 3.3 4.7 10 22 33 47 100 220 330 1 2.2 3.3 4.7 10 22 33 47 100 220 1 2.2 3.3 4.7 10 22 33 47 100 1 2.2 3.3 4.7 10 22 33 47 100 8 10 10 12.5 16 16 18 6.3 6.3 6.3 6.3 10 10 10 12.5 16 16 18 6.3 6.3 6.3 8 10 10 12.5 12.5 16 18 6.3 6.3 8 8 10 12.5 12.5 12.5 16 6.3 8 10 10 10 12.5 16 16 18 11.5 12.5 20 25 25 25 35.5 11.2 11.2 11.2 11.2 12.5 20 20 20 25 31.5 31.5 11.2 11.2 11.2 11.5 16 20 20 20 25 31.5 11.2 11.2 11.5 11.5 16 20 20 25 31.5 11.2 11.5 12.5 16 20 20 25 25 31.5 130 165 265 440 540 715 985 17 25 36 43 70 130 180 220 335 540 705 17 25 36 50 80 140 190 220 335 575 17 29 42 50 88 155 190 230 365 18 31 38 50 82 130 195 230 375 0.08 0.08 0.08 0.08 0.08 0.08 0.08 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 1000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 2000 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 3.5 5.0 5.0 5.0 7.5 7.5 7.5 2.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 2.5 2.5 2.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 3.5 3.5 5.0 5.0 5.0 5.0 7.5 2.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 Min. Packaging Q'ty Part No. ECA2AHG330( ) ECA2AHG470( ) ECA2AHG101( ) ECA2AHG221( ) ECA2AHG331( ) ECA2AHG471( ) ECA2AHG102 ECA2CHG010( ) ECA2CHG2R2( ) ECA2CHG3R3( ) ECA2CHG4R7( ) ECA2CHG100( ) ECA2CHG220( ) ECA2CHG330( ) ECA2CHG470( ) ECA2CHG101( ) ECA2CHG221 ECA2CHG331 ECA2DHG010( ) ECA2DHG2R2( ) ECA2DHG3R3( ) ECA2DHG4R7( ) ECA2DHG100( ) ECA2DHG220( ) ECA2DHG330( ) ECA2DHG470( ) ECA2DHG101( ) ECA2DHG221 ECA2EHG010( ) ECA2EHG2R2( ) ECA2EHG3R3 ECA2EHG4R7( ) ECA2EHG100( ) ECA2EHG220( ) ECA2EHG330( ) ECA2EHG470( ) ECA2EHG101 ECA2VHG010( ) ECA2VHG2R2( ) ECA2VHG3R3( ) ECA2VHG4R7( ) ECA2VHG100( ) ECA2VHG220( ) ECA2VHG330( ) ECA2VHG470( ) ECA2VHG101 Straight Taping Leads (pcs) (pcs) 200 200 200 200 100 100 50 200 200 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 200 100 50 200 200 200 200 200 200 200 200 100 200 200 200 200 200 200 100 100 50 1000 500 500 500 250 250 2000 2000 2000 2000 500 500 500 500 250 2000 2000 2000 1000 500 500 500 500 250 2000 2000 1000 1000 500 500 500 500 2000 1000 500 500 500 500 250 250 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-102 - Aluminum Electrolytic Capacitors/ NHG Standard Products Case size Specification Lead Length Ripple tan d Endur- Lead Lead Space Cap. W.V. ance Dia. (20 %) Dia. Length Current Taping Taping (120 Hz) (120 Hz) Straight B i (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) 1 400 450 6.3 11.2 18 0.24 2.2 8 11.5 30 0.24 3.3 10 12.5 40 0.24 2000 5.0 2.5 Min. Packaging Q'ty Part No. ECA2GHG010( ) Straight Taping Leads (pcs) (pcs) 200 2000 0.5 2.5 2000 0.6 3.5 5.0 ECA2GHG2R2( ) 200 1000 2000 0.6 5.0 5.0 ECA2GHG3R3( ) 200 500 4.7 10 16 50 0.24 2000 0.6 5.0 5.0 ECA2GHG4R7( ) 200 500 10 10 20 80 0.24 2000 0.6 5.0 5.0 ECA2GHG100( ) 200 500 22 12.5 25 145 0.24 2000 0.6 5.0 5.0 ECA2GHG220( ) 200 500 33 16 25 195 0.24 2000 0.8 7.5 7.5 ECA2GHG330( ) 100 250 47 16 31.5 250 0.24 2000 0.8 7.5 ECA2GHG470 100 1 8 11.5 18 0.24 2000 0.6 3.5 5.0 ECA2WHG010( ) 200 1000 2.2 10 12.5 29 0.24 2000 0.6 5.0 5.0 ECA2WHG2R2( ) 200 500 3.3 10 16 41 0.24 2000 0.6 5.0 5.0 ECA2WHG3R3( ) 200 500 4.7 10 20 49 0.24 2000 0.6 5.0 5.0 ECA2WHG4R7( ) 200 500 10 12.5 20 75 0.24 2000 0.6 5.0 5.0 ECA2WHG100( ) 200 500 22 16 25 115 0.24 2000 0.8 7.5 7.5 ECA2WHG220( ) 100 250 33 16 31.5 155 0.24 2000 0.8 7.5 ECA2WHG330 100 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-103 - Aluminum Electrolytic Capacitors/ HD Radial Lead Type Series: HD Type: A Features Endurance : 105 C 1000 h to 2000 h Minaturize, Higher Capacitance : 1 Size Miniturized Product of Current A-NHG RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance -55 C to +105 C 10 V.DC to 50 V.DC 2.2 F to 22000 F 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (Which is greater) DC Leakage Current tan d Please see the attached standard products list After following life test with DC voltage and +105 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors are restored to 20 C, the capacitors shall meet the limits specified below. Duration : 05 to 08=1000 hours, 010 to 018=2000 hours Endurance Capacitance change 20 % of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current W.V.(V.DC) Frequency (Hz) Cap. (F) 2.2 10 to 50 to 60 120 1k 10 k 100 k 33 0.75 1.00 1.55 1.80 2.00 47 to 470 0.80 1.00 1.35 1.50 1.50 1000 to 22000 0.85 1.00 1.10 1.15 1.15 Dimensions in mm (not to scale) fd0.05 (Unit : mm) Sleeve Pressure relief 06.3 08 010 + L= 14 min. 0D0.5 3 min. F0.5 - 0D0.5 = L16 : L1.5 L20 : L2.0 Body Dia. 0D Lead Dia. 0d Lead space F 5 0.5 2.0 6.3 0.5 2.5 8 0.6 3.5 10 0.6 5.0 12.5 0.6 5.0 16 0.8 7.5 18 0.8 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-104 - Aluminum Electrolytic Capacitors/ HD Standard Products Endurance : 105 C 05 to 08=1000 h, 010 to 018=2000 h Case size Specification Lead Length Ripple tan EndurLead d Lead Space Cap. W.V. ance Dia. (20 %) Dia. Length Current (120 Hz) (120 Hz) Straight Taping Taping B H (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) 10 16 25 35 330 470 1000 2200 4700 6800 10000 15000 22000 100 220 330 470 3300 4700 6800 8200 10000 15000 47 68 100 220 330 470 1000 2200 3300 4700 5600 6800 10000 47 100 220 330 470 680 2200 3300 4700 6800 6.3 8 10 10 12.5 12.5 16 16 18 5 6.3 8 8 12.5 12.5 16 16 16 18 5 5 6.3 8 8 10 10 12.5 12.5 16 16 16 18 5 6.3 8 10 10 10 12.5 16 16 18 11.2 200 11.5 250 12.5 460 16 760 20 1260 25 1570 25 1890 31.5 2180 35.5 2400 11 110 11.2 180 11.5 260 11.5 310 20 1170 25 1480 25 1780 25 1780 31.5 2060 35.5 2210 11 91 11 91 11.2 130 11.5 230 11.5 310 12.5 380 16 680 20 1090 25 1400 25 1750 25 1750 31.5 2040 35.5 2200 11 90 11.2 150 11.5 270 12.5 350 16 460 16 460 25 1260 25 1610 31.5 1910 35.5 2050 0.24 0.24 0.24 0.26 0.30 0.34 0.42 0.52 0.66 0.20 0.20 0.20 0.20 0.24 0.26 0.30 0.34 0.38 0.48 0.16 0.16 0.16 0.16 0.16 0.16 0.16 0.18 0.20 0.22 0.24 0.26 0.34 0.14 0.14 0.14 0.14 0.14 0.14 0.16 0.18 0.20 0.24 1000 1000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 2000 2000 2000 2000 2000 2000 1000 1000 1000 1000 1000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 1000 2000 2000 2000 2000 2000 2000 2000 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 0.8 2.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.0 2.5 3.5 3.5 5.0 5.0 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 2.0 2.0 2.5 3.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 7.5 2.5 2.5 2.5 2.0 2.5 3.5 5.0 5.0 5.0 5.0 7.5 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 Min. Packaging Q'ty Part No. EEUHD1A331( ) EEUHD1A471( ) EEUHD1A102( ) EEUHD1A222( ) EEUHD1A472( ) EEUHD1A682( ) EEUHD1A103( ) EEUHD1A153 EEUHD1A223 EEUHD1C101( ) EEUHD1C221( ) EEUHD1C331( ) EEUHD1C471( ) EEUHD1C332( ) EEUHD1C472( ) EEUHD1C682( ) EEUHD1C822( ) EEUHD1C103 EEUHD1C153 EEUHD1E470( ) EEUHD1E680( ) EEUHD1E101( ) EEUHD1E221( ) EEUHD1E331( ) EEUHD1E471( ) EEUHD1E102( ) EEUHD1E222( ) EEUHD1E332( ) EEUHD1E472( ) EEUHD1E562( ) EEUHD1E682 EEUHD1E103 EEUHD1V470( ) EEUHD1V101( ) EEUHD1V221( ) EEUHD1V331( ) EEUHD1V471( ) EEUHD1V681( ) EEUHD1V222( ) EEUHD1V332( ) EEUHD1V472 EEUHD1V682 Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 100 100 100 50 200 200 200 200 200 200 200 200 200 100 100 100 50 200 200 200 200 200 200 200 100 100 50 2000 1000 500 500 500 500 250 2000 2000 1000 1000 500 500 250 250 2000 2000 2000 1000 1000 500 500 500 500 250 250 2000 2000 1000 500 500 500 500 250 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-105 - Aluminum Electrolytic Capacitors/ HD Standard Products Endurance : 105 C 05 to 08=1000 h, 010 to 018=2000 h Case size Specification Lead Length Ripple tan EndurLead d Lead Space Cap. W.V. ance Dia. (20 %) Dia. Length Current (120 Hz) (120 Hz) Straight Taping Taping B H (+105 C) (+20 C) (V) (F) (mm) (mm) (mA r.m.s.) (hours) (mm) (mm) (mm) (mm) 50 Min. Packaging Q'ty Part No. Straight Taping Leads (pcs) (pcs) 1.1 0.12 1000 0.5 2.0 5.0 2.5 EEUHD1HR10( ) 200 2000 11 2.3 0.12 1000 0.5 2.0 5.0 2.5 EEUHD1HR22( ) 200 2000 11 3.5 0.12 1000 0.5 2.0 5.0 2.5 EEUHD1HR33( ) 200 2000 5 11 5 0.12 1000 0.5 2.0 5.0 2.5 EEUHD1HR47( ) 200 2000 0.1 5 11 0.22 5 0.33 5 0.47 1 5 11 10 0.12 1000 0.5 2.0 5.0 2.5 EEUHD1H1R0( ) 200 2000 2.2 5 11 18 0.12 1000 0.5 2.0 5.0 2.5 EEUHD1H2R2( ) 200 2000 3.3 5 11 22 0.12 1000 0.5 2.5 EEUHD1H3R3( ) 200 2000 5 11 26 0.12 1000 0.5 2.0 2.0 5.0 4.7 5.0 2.5 EEUHD1H4R7( ) 200 2000 10 5 11 39 0.12 1000 0.5 2.5 EEUHD1H100( ) 200 2000 5 11 65 0.12 1000 0.5 2.0 2.0 5.0 22 5.0 2.5 EEUHD1H220( ) 200 2000 33 5 11 47 6.3 11.2 90 0.12 1000 0.5 2.0 5.0 2.5 EEUHD1H330( ) 200 2000 110 0.12 1000 0.5 2.5 5.0 2.5 EEUHD1H470( ) 200 2000 2.5 68 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 EEUHD1H680( ) 200 2000 100 8 11.5 180 0.12 1000 0.6 3.5 5.0 EEUHD1H101( ) 200 1000 220 10 12.5 300 0.12 2000 0.6 5.0 5.0 EEUHD1H221( ) 200 500 330 10 16 410 0.12 2000 0.6 5.0 5.0 EEUHD1H331( ) 200 500 470 10 20 530 0.12 2000 0.6 5.0 5.0 EEUHD1H471( ) 200 500 560 16 15 650 0.12 2000 0.8 7.5 7.5 EEUHD1H561S( ) 100 250 680 16 15 650 0.12 2000 0.8 7.5 7.5 EEUHD1H681S( ) 100 250 5.0 500 1000 12.5 25 950 0.12 2000 0.6 5.0 EEUHD1H102( ) 200 2200 16 31.5 1470 0.14 2000 0.8 7.5 EEUHD1H222 100 3300 18 35.5 1770 0.16 2000 0.8 7.5 EEUHD1H332 50 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, H=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-106 - Aluminum Electrolytic Capacitors/ GA Radial Lead Type Series: GA Type: A Features Endurance : 105 C 1000 h RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan d -55 C to +105 C 10 V.DC to 50 V.DC 1.5 F to 220 F 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) Please see the attached standard products list After following life test with DC voltage and +105 C2 C ripple current value applied (The sum of DC and ripple peak voltage shall not exceed the rated working voltage), for 1000 hours, when the capacitors are restored to 20 C, the capacitors shall meet the limits specified below. Endurance Shelf Life Capacitance change 20 % of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Frequency correction factor for ripple current W.V.(V.DC) 10 to 50 Frequency (Hz) Cap (F) 1.5 to 220 60 120 1k 10 k 100 k to 0.85 1.00 1.30 1.40 1.55 Dimensions in mm(not to scale) Sleeve fd0.05 (Unit : mm) + L1.0 14 min. 3 min. 0D0.5 F0.5 - Body Dia. 0D 4 5 6.3 8 Lead Dia. 0d 0.45 0.45 0.45 0.45 Lead space F 1.5 2.0 2.5 2.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 May. 2014 - EEE-107 - Aluminum Electrolytic Capacitors/ GA Standard Products Endurance : 105 C 1000 h Case size W.V. (V) 10 16 Specification Lead Length Ripple tan d Endur- Lead Lead Space Cap. ance Dia. (20 %) Dia. Length Current Taping Taping (120 Hz) (120 Hz) Straight B H (+105 C) (+20 C) (hours) (mm) (mm) (mm) (mm) (F) (mm) (mm) (mA r.m.s.) 22 4 7 33 5 47 6.3 35 50 Part No. Straight Taping Leads (pcs) (pcs) 1.5 5.0 2.5 EEAGA1A220( ) 200 2000 0.45 2.0 5.0 2.5 EEAGA1A330( ) 200 2000 0.45 2.5 5.0 2.5 EEAGA1A470( ) 200 2000 30 0.22 1000 0.45 7 50 0.22 1000 7 65 0.22 1000 68 6.3 7 75 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A680( ) 200 2000 100 6.3 7 110 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A101( ) 200 2000 220 8 7 160 0.22 1000 0.45 2.5 5.0 2.5 EEAGA1A221( ) 200 1000 10 4 7 30 0.18 1000 0.45 1.5 5.0 2.5 EEAGA1C100( ) 200 2000 15 4 7 33 0.18 1000 0.45 1.5 5.0 2.5 EEAGA1C150( ) 200 2000 22 5 7 50 0.18 1000 0.45 2.0 5.0 2.5 EEAGA1C220( ) 200 2000 33 6.3 7 65 0.18 1000 0.45 2.5 5.0 2.5 EEAGA1C330( ) 200 2000 47 6.3 7 77 0.18 1000 0.45 2.5 5.0 2.5 EEAGA1C470( ) 200 2000 8 7 120 0.18 1000 0.45 2.5 5.0 2.5 EEAGA1C101( ) 200 1000 100 25 Min. Packaging Q'ty 10 4 7 33 0.16 1000 0.45 1.5 5.0 2.5 EEAGA1E100( ) 200 2000 15 5 7 45 0.16 1000 0.45 2.0 5.0 2.5 EEAGA1E150( ) 200 2000 22 5 7 50 0.16 1000 0.45 2.0 5.0 2.5 EEAGA1E220( ) 200 2000 33 6.3 7 75 0.16 1000 0.45 2.5 5.0 2.5 EEAGA1E330( ) 200 2000 68 8 7 100 0.16 1000 0.45 2.5 5.0 2.5 EEAGA1E680( ) 200 1000 6.8 4 7 33 0.13 1000 0.45 1.5 5.0 2.5 EEAGA1V6R8( ) 200 2000 10 5 7 35 0.13 1000 0.45 2.0 5.0 2.5 EEAGA1V100( ) 200 2000 15 6.3 7 50 0.13 1000 0.45 2.5 5.0 2.5 EEAGA1V150( ) 200 2000 22 6.3 7 70 0.13 1000 0.45 2.5 5.0 2.5 EEAGA1V220( ) 200 2000 47 8 7 96 0.13 1000 0.45 2.5 5.0 2.5 EEAGA1V470( ) 200 1000 0.1 4 7 1.1 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR10( ) 200 2000 0.15 4 7 1.7 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR15( ) 200 2000 0.22 4 7 2.3 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR22( ) 200 2000 0.33 4 7 3.5 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR33( ) 200 2000 0.47 4 7 5 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR47( ) 200 2000 0.68 4 7 7 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1HR68( ) 200 2000 1 4 7 10 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H1R0( ) 200 2000 1.5 4 7 16 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H1R5( ) 200 2000 2.2 4 7 18 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H2R2( ) 200 2000 3.3 4 7 22 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H3R3( ) 200 2000 4.7 4 7 26 0.10 1000 0.45 1.5 5.0 2.5 EEAGA1H4R7( ) 200 2000 6.8 5 7 35 0.10 1000 0.45 2.0 5.0 2.5 EEAGA1H6R8( ) 200 2000 10 6.3 7 39 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H100( ) 200 2000 15 6.3 7 55 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H150( ) 200 2000 22 8 7 70 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H220( ) 200 1000 33 8 7 91 0.10 1000 0.45 2.5 5.0 2.5 EEAGA1H330( ) 200 1000 * When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch B=5 mm, H=2.5 mm. Suffix "BQ" for 08x7, 5mm pitch products * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 May. 2014 - EEE-108 - Aluminum Electrolytic Capacitors/ GA(Bi-polar) Radial Lead Type Series: GA(Bi-polar) Type: A Features Endurance : 105 C 1000 h to 2000 h RoHS directive compliant Specifications Category Temp. Range -40 C to +105 C Rated W.V. Range 6.3 V.DC to 50 V.DC Nominal Cap. Range 2.2 F to 330 F Capacitance Tolerance 20 % (120 Hz/+20 C) I < 0.03 CV +3 (A) After 2 minutes or I < 0.03 CV or 3 (A) After 5 minutes (Whichever is greater) DC Leakage Current tan d Please see the attached standard products list After following life test of DC working voltage at +105 C2 C when the capacitors are restored to 20 C, the capacitors shall meet the following limits. Duration 05 to 08 : 1000 hours (500 hours for each polarity) : 2000 hours (1000 hours for each polarity) 010 Endurance Capacitance change 20% of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k to 0.70 1.00 1.30 1.70 Dimensions in mm (not to scale) fd0.05 (Unit : mm) L= 14 min. 08 0D0.5 3 min. 010 F0.5 Sleeve Pressure relief 06.3 0D0.5 = L16 : L1.0 L20 : L2.0 Body Dia. 0D 5 6.3 8 10 Lead Dia. 0d 0.5 Lead space F 2.0 0.5 0.6 0.6 2.5 3.5 5.0 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-109 - Aluminum Electrolytic Capacitors/ GA(Bi-polar) Standard Products (Bi-polar) Endurance : 105 C 05 to 08=1000 h (500 h for each polarity), 010=2000 h (1000 h for each polarity) Case size W.V. (V) 6.3 10 16 25 35 50 Cap. (20 %) Dia. (F) (mm) 100 6.3 Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+105 C) (+20 C) (mm) (mA r.m.s.) Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping Taping B i (mm) (mm) (mm) (mm) 0.5 2.5 5.0 2.5 Part No. Straight Taping Leads (pcs) (pcs) ECA0JEN101( ) 200 2000 11.2 130 0.30 250 0.30 0.6 3.5 5.0 ECA0JEN331( ) 200 1000 90 0.24 0.5 2.0 5.0 2.5 ECA1AEN470( ) 200 2000 330 8 11.5 47 5 11 10 5 11 40 0.20 0.5 2.0 5.0 2.5 ECA1CEN100( ) 200 2000 22 5 11 60 0.20 0.5 2.0 5.0 2.5 ECA1CEN220( ) 200 2000 80 0.20 0.5 2.0 5.0 2.5 ECA1CEN330( ) 200 2000 100 0.20 0.5 2.5 5.0 2.5 ECA1CEN470( ) 200 2000 11 45 0.15 0.5 2.0 5.0 2.5 ECA1EEN100( ) 200 2000 11.2 60 0.15 0.5 2.5 5.0 2.5 ECA1EEN220( ) 200 2000 33 5 11 47 6.3 11.2 10 5 22 6.3 33 6.3 11.2 90 0.15 0.5 2.5 5.0 2.5 ECA1EEN330( ) 200 2000 47 6.3 11.2 110 0.15 0.5 2.5 5.0 2.5 ECA1EEN470( ) 200 2000 100 8 11.5 180 0.15 0.6 3.5 5.0 ECA1EEN101( ) 200 1000 33 8 11.5 100 0.15 0.6 3.5 5.0 ECA1VEN330( ) 200 1000 100 10 16 230 0.15 0.6 5.0 5.0 ECA1VEN101( ) 200 500 0.47 5 11 10 0.15 0.5 2.0 5.0 2.5 ECA1HENR47( ) 200 2000 1 5 11 10 0.15 0.5 2.0 5.0 2.5 ECA1HEN010( ) 200 2000 2.2 5 11 18 0.15 0.5 2.0 5.0 2.5 ECA1HEN2R2( ) 200 2000 3.3 5 11 25 0.15 0.5 2.0 5.0 2.5 ECA1HEN3R3( ) 200 2000 4.7 5 11 30 0.15 0.5 2.0 5.0 2.5 ECA1HEN4R7( ) 200 2000 10 6.3 11.2 50 0.15 0.5 2.5 5.0 2.5 ECA1HEN100( ) 200 2000 22 8 11.5 90 0.15 0.6 3.5 5.0 ECA1HEN220( ) 200 1000 33 8 11.5 110 0.15 0.6 3.5 5.0 ECA1HEN330( ) 200 1000 47 10 12.5 140 0.15 0.6 5.0 5.0 ECA1HEN470( ) 200 500 100 10 20 250 0.15 0.6 5.0 5.0 ECA1HEN101( ) 200 500 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-110 - Aluminum Electrolytic Capacitors/ M Radial Lead Type Series: M Type: A Features Endurance : 85 C 2000 h Smaller than series SU RoHS directive compliant Specifications Category Temp. Range Rated W.V. Range -40 C to + 85 C -25 C to +85 C 6.3 V.DC to 100 V.DC 160 V.DC to 450 V.DC 2.2 F to 22000 F 1 F to 470 F Nominal Cap. Range Capacitance Tolerance 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) DC Leakage Current tan d I < 0.06 CV +10 (A) After 2 minutes Please see the attached standard products list After applying rated working voltage for 2000 hours at +85C2 C, when the capacitors are restored to 20 C, capacitors shall meet the following limits. Endurance Capacitance change 20 % of initial measured value tan d <150 % of initial specified value DC leakage current <initial specified value After storage for 1000 hours at +85 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k to 0.70 1.00 1.30 1.70 Dimensions in mm (not to scale) fd0.05 (Unit : mm) Sleeve Pressure relief 06.3 08 010 + L= 14 min. 0D+0.5 3 min. F0.5 - 0D+0.5 = L16 : L1.0 L20 : L2.0 Body Dia. 0D 5 6.3 8 10 Lead Dia. 0d 0.5 Lead space F 2.0 12.5 16 18 0.5 0.6 2.5 3.5 0.6 0.6 0.8 0.8 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-111 - Aluminum Electrolytic Capacitors/ M Standard Products Endurance : 85 C 2000 h Case size W.V. (V) 6.3 Cap. (20 %) (F) Straight (mm) (mm) Taping Taping B i (mm) Part No. (mm) Straight Taping Leads (pcs) (pcs) 5 11 240 0.28 0.5 2.0 5.0 2.5 ECA0JM221( ) 200 2000 11.2 380 0.28 0.5 2.5 5.0 2.5 ECA0JM471( ) 200 2000 1000 8 11.5 580 0.28 0.6 3.5 5.0 ECA0JM102( ) 200 1000 2200 10 16 890 0.30 0.6 5.0 5.0 ECA0JM222( ) 200 500 3300 10 20 1020 0.32 0.6 5.0 5.0 ECA0JM332( ) 200 500 4700 12.5 20 1170 0.34 0.6 5.0 5.0 ECA0JM472( ) 200 500 6800 12.5 25 1270 0.38 0.6 5.0 5.0 ECA0JM682( ) 200 500 10000 16 25 1450 0.46 0.8 7.5 7.5 ECA0JM103( ) 100 250 15000 16 31.5 1700 0.56 0.8 7.5 ECA0JM153 100 18 35.5 1900 0.70 0.8 7.5 330 6.3 11.2 330 0.24 0.5 2.5 5.0 1000 10 12.5 630 0.24 0.6 5.0 5.0 ECA1AM102( ) 200 500 2200 10 20 920 0.26 0.6 5.0 5.0 ECA1AM222( ) 200 500 ECA0JM223 2.5 ECA1AM331( ) 50 200 2000 3300 12.5 20 1090 0.28 0.6 5.0 5.0 ECA1AM332( ) 200 500 4700 12.5 25 1200 0.30 0.6 5.0 5.0 ECA1AM472( ) 200 500 6800 16 25 1400 0.34 0.8 7.5 7.5 ECA1AM682( ) 100 250 10000 16 31.5 1600 0.42 0.8 7.5 ECA1AM103 100 1850 0.52 0.8 7.5 30 0.20 0.5 2.0 5.0 18 35.5 5 11 ECA1AM153 2.5 ECA1CM100( ) 50 200 2000 22 5 11 75 0.20 0.5 2.0 5.0 2.5 ECA1CM220( ) 200 2000 33 5 11 110 0.20 0.5 2.0 5.0 2.5 ECA1CM330( ) 200 2000 47 5 11 130 0.20 0.5 2.0 5.0 2.5 ECA1CM470( ) 200 2000 100 5 11 180 0.20 0.5 2.0 5.0 2.5 ECA1CM101( ) 200 2000 220 6.3 11.2 280 0.20 0.5 2.5 5.0 2.5 ECA1CM221( ) 200 2000 470 8 11.5 440 0.20 0.6 3.5 5.0 ECA1CM471( ) 200 1000 1000 10 16 680 0.20 0.6 5.0 5.0 ECA1CM102( ) 200 500 2200 12.5 20 1000 0.22 0.6 5.0 5.0 ECA1CM222( ) 200 500 3300 12.5 25 1200 0.24 0.6 5.0 5.0 ECA1CM332( ) 200 500 4700 16 25 1360 0.26 0.8 7.5 7.5 ECA1CM472( ) 100 250 6800 16 31.5 1600 0.30 0.8 7.5 ECA1CM682 100 10000 18 35.5 1800 0.38 0.8 7.5 ECA1CM103 50 100 6.3 11.2 180 0.16 0.5 2.5 5.0 ECA1EM101( ) 200 2000 330 8 11.5 390 0.16 0.6 3.5 5.0 ECA1EM331( ) 200 1000 470 10 12.5 480 0.16 0.6 5.0 5.0 ECA1EM471( ) 200 500 1000 10 20 850 0.16 0.6 5.0 5.0 ECA1EM102( ) 200 500 2.5 2200 12.5 25 1200 0.18 0.6 5.0 5.0 ECA1EM222( ) 200 500 3300 16 25 1300 0.20 0.8 7.5 7.5 ECA1EM332( ) 100 250 4700 16 31.5 1500 0.22 0.8 7.5 ECA1EM472 100 6800 18 35.5 1750 0.26 0.8 7.5 ECA1EM682 50 47 35 Lead Space 6.3 10 25 Lead Dia. Min. Packaging Q'ty 470 15000 16 (mm) Lead Length 220 22000 10 Dia. Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 C) (+20 C) (mm) (mA r.m.s.) 5 11 130 0.14 0.5 2.0 5.0 2.5 ECA1VM470( ) 200 2000 100 6.3 11.2 210 0.14 0.5 2.5 5.0 2.5 ECA1VM101( ) 200 2000 220 8 11.5 350 0.14 0.6 3.5 5.0 ECA1VM221( ) 200 1000 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-112 - Aluminum Electrolytic Capacitors/ M Standard Products Endurance : 85 C 2000 h Case size W.V. (V) 35 50 Cap. (20 %) Lead Dia. Lead Space Straight (mm) Min. Packaging Q'ty (mm) Taping Taping B i (mm) Part No. (mm) Straight Taping Leads (pcs) (pcs) (mm) 330 10 12.5 440 0.14 0.6 5.0 5.0 ECA1VM331( ) 200 500 470 10 16 550 0.14 0.6 5.0 5.0 ECA1VM471( ) 200 500 1000 12.5 20 900 0.14 0.6 5.0 5.0 ECA1VM102( ) 200 500 2200 16 25 1250 0.16 0.8 7.5 7.5 ECA1VM222( ) 100 250 3300 16 31.5 1400 0.18 0.8 7.5 ECA1VM332 100 4700 18 35.5 1600 0.20 0.8 7.5 0.1 5 11 1.3 0.12 0.5 2.0 5.0 2.5 0.22 5 11 2.9 0.12 0.5 2.0 5.0 0.33 5 11 4.4 0.12 0.5 2.0 5.0 ECA1VM472 50 ECA1HM0R1( ) 200 2000 2.5 ECA1HMR22( ) 200 2000 2.5 ECA1HMR33( ) 200 2000 0.47 5 11 5 0.12 0.5 2.0 5.0 2.5 ECA1HMR47( ) 200 2000 1 5 11 10 0.12 0.5 2.0 5.0 2.5 ECA1HM010( ) 200 2000 2.2 5 11 20 0.12 0.5 2.0 5.0 2.5 ECA1HM2R2( ) 200 2000 3.3 5 11 35 0.12 0.5 2.0 5.0 2.5 ECA1HM3R3( ) 200 2000 4.7 5 11 45 0.12 0.5 2.0 5.0 2.5 ECA1HM4R7( ) 200 2000 10 5 11 65 0.12 0.5 2.0 5.0 2.5 ECA1HM100( ) 200 2000 22 5 11 100 0.12 0.5 2.0 5.0 2.5 ECA1HM220( ) 200 2000 33 5 11 110 0.12 0.5 2.0 5.0 2.5 ECA1HM330( ) 200 2000 47 6.3 11.2 130 0.12 0.5 2.5 5.0 2.5 ECA1HM470( ) 200 2000 8 11.5 250 0.12 0.6 3.5 5.0 ECA1HM101( ) 200 1000 220 10 12.5 400 0.12 0.6 5.0 5.0 ECA1HM221( ) 200 500 330 10 16 500 0.12 0.6 5.0 5.0 ECA1HM331( ) 200 500 470 10 20 650 0.12 0.6 5.0 5.0 ECA1HM471( ) 200 500 12.5 25 1050 0.12 0.6 5.0 5.0 ECA1HM102( ) 200 500 1000 100 Lead Length (F) 100 63 Dia. Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 C) (+20 C) (mm) (mA r.m.s.) 2200 16 31.5 1300 0.14 0.8 7.5 ECA1HM222 100 3300 18 35.5 1500 0.16 0.8 7.5 ECA1HM332 50 10 5 11 70 0.11 0.5 2.0 5.0 2.5 ECA1JM100( ) 200 2000 22 5 11 105 0.11 0.5 2.0 5.0 2.5 ECA1JM220( ) 200 2000 33 6.3 11.2 130 0.11 0.5 2.5 5.0 2.5 ECA1JM330( ) 200 2000 47 6.3 11.2 160 0.11 0.5 2.5 5.0 2.5 ECA1JM470( ) 200 2000 100 8 11.5 270 0.11 0.6 3.5 5.0 ECA1JM101( ) 200 1000 220 10 16 450 0.11 0.6 5.0 5.0 ECA1JM221( ) 200 500 330 10 20 550 0.11 0.6 5.0 5.0 ECA1JM331( ) 200 500 470 12.5 20 750 0.11 0.6 5.0 5.0 ECA1JM471( ) 200 500 7.5 ECA1JM102( ) 100 250 1000 16 25 1100 0.11 0.8 7.5 2200 18 35.5 1400 0.13 0.8 7.5 0.47 5 11 10 0.10 0.5 2.0 5.0 2.5 ECA2AMR47( ) 200 2000 1 5 11 20 0.10 0.5 2.0 5.0 2.5 ECA2AM010( ) 200 2000 ECA1JM222 50 2.2 5 11 30 0.10 0.5 2.0 5.0 2.5 ECA2AM2R2( ) 200 2000 3.3 5 11 40 0.10 0.5 2.0 5.0 2.5 ECA2AM3R3( ) 200 2000 4.7 5 11 50 0.10 0.5 2.0 5.0 2.5 ECA2AM4R7( ) 200 2000 10 5 11 70 0.10 0.5 2.0 5.0 2.5 ECA2AM100( ) 200 2000 22 6.3 11.2 115 0.10 0.5 2.5 5.0 2.5 ECA2AM220( ) 200 2000 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-113 - Aluminum Electrolytic Capacitors/ M Standard Products Endurance : 85 C 2000 h Case size W.V. (V) 100 160 200 250 Cap. (20 %) (F) (mm) Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping Taping B i (mm) (mm) (mm) Part No. (mm) Straight Taping Leads (pcs) (pcs) 33 8 11.5 145 0.10 0.6 3.5 5.0 ECA2AM330( ) 200 1000 47 8 11.5 180 0.10 0.6 3.5 5.0 ECA2AM470( ) 200 1000 100 10 16 350 0.10 0.6 5.0 5.0 ECA2AM101( ) 200 500 220 12.5 20 550 0.10 0.6 5.0 5.0 ECA2AM221( ) 200 500 330 12.5 25 700 0.10 0.6 5.0 5.0 ECA2AM331( ) 200 500 7.5 ECA2AM471( ) 100 250 470 16 25 900 0.10 0.8 7.5 1000 18 35.5 1300 0.10 0.8 7.5 ECA2AM102 50 1 6.3 11.2 36 0.16 0.5 2.5 5.0 2.5 ECA2CM010( ) 200 2000 2.2 6.3 11.2 53 0.16 0.5 2.5 5.0 2.5 ECA2CM2R2( ) 200 2000 3.3 6.3 11.2 66 0.16 0.5 2.5 5.0 2.5 ECA2CM3R3( ) 200 2000 4.7 6.3 11.2 78 0.16 0.5 2.5 5.0 2.5 ECA2CM4R7( ) 200 2000 10 10 12.5 105 0.16 0.6 5.0 5.0 ECA2CM100( ) 200 500 22 10 16 175 0.16 0.6 5.0 5.0 ECA2CM220( ) 200 500 33 10 20 235 0.16 0.6 5.0 5.0 ECA2CM330( ) 200 500 47 12.5 20 320 0.16 0.6 5.0 5.0 ECA2CM470( ) 200 500 5.0 500 100 12.5 25 515 0.16 0.6 5.0 ECA2CM101( ) 200 220 16 31.5 830 0.16 0.8 7.5 ECA2CM221 100 330 18 31.5 1090 0.16 0.8 7.5 ECA2CM331 50 470 18 40 1440 0.16 0.8 7.5 ECA2CM471 50 1 6.3 11.2 34 0.18 0.5 2.5 5.0 2.5 ECA2DM010( ) 200 2000 2.2 6.3 11.2 50 0.18 0.5 2.5 5.0 2.5 ECA2DM2R2( ) 200 2000 3.3 6.3 11.2 62 0.18 0.5 2.5 5.0 2.5 ECA2DM3R3( ) 200 2000 4.7 8 11.5 86 0.18 0.6 3.5 5.0 ECA2DM4R7( ) 200 1000 10 10 12.5 100 0.18 0.6 5.0 5.0 ECA2DM100( ) 200 500 22 10 20 180 0.18 0.6 5.0 5.0 ECA2DM220( ) 200 500 33 10 20 220 0.18 0.6 5.0 5.0 ECA2DM330( ) 200 500 47 12.5 20 300 0.18 0.6 5.0 5.0 ECA2DM470( ) 200 500 100 16 25 475 0.18 0.8 7.5 7.5 ECA2DM101( ) 100 250 220 18 31.5 835 0.18 0.8 7.5 ECA2DM221 330 18 40 1140 0.18 0.8 7.5 1 6.3 11.2 34 0.18 0.5 2.5 5.0 2.5 ECA2DM331 2.5 2.2 6.3 11.2 50 0.18 0.5 2.5 5.0 3.3 8 11.5 72 0.18 0.6 3.5 5.0 4.7 8 11.5 10 10 16 ECA2EM010( ) 50 50 200 2000 ECA2EM2R2( ) 200 2000 ECA2EM3R3( ) 200 1000 86 0.18 0.6 3.5 5.0 ECA2EM4R7( ) 200 1000 110 0.18 0.6 5.0 5.0 ECA2EM100( ) 200 500 22 10 20 180 0.18 0.6 5.0 5.0 ECA2EM220( ) 200 500 33 12.5 20 250 0.18 0.6 5.0 5.0 ECA2EM330( ) 200 500 47 12.5 25 330 0.18 0.6 5.0 5.0 ECA2EM470( ) 200 500 16 31.5 530 0.18 0.8 7.5 ECA2EM101 100 100 350 Dia. Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 C) (+20 C) (mm) (mA r.m.s.) 220 18 40 930 0.18 0.8 7.5 1 6.3 11.2 32 0.20 0.5 2.5 5.0 8 11.5 55 0.20 0.6 3.5 5.0 2.2 ECA2EM221 2.5 50 ECA2VM010( ) 200 2000 ECA2VM2R2( ) 200 1000 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-114 - Aluminum Electrolytic Capacitors/ M Standard Products Endurance : 85 C 2000 h Case size W.V. (V) 350 400 450 Cap. (20 %) (F) Dia. (mm) Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 C) (+20 C) (mm) (mA r.m.s.) Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping Taping B i (mm) (mm) (mm) Part No. (mm) Straight Taping Leads (pcs) (pcs) 3.3 8 11.5 60 0.20 0.6 3.5 5.0 ECA2VM3R3( ) 200 1000 4.7 10 12.5 65 0.20 0.6 5.0 5.0 ECA2VM4R7( ) 200 500 10 10 20 115 0.20 0.6 5.0 5.0 ECA2VM100( ) 200 500 22 12.5 20 195 0.20 0.6 5.0 5.0 ECA2VM220( ) 200 500 33 16 25 300 0.20 0.8 7.5 7.5 ECA2VM330( ) 100 250 7.5 ECA2VM470( ) 100 250 47 16 25 325 0.20 0.8 7.5 100 18 31.5 535 0.20 0.8 7.5 1 ECA2VM101 2.5 50 6.3 11.2 32 0.20 0.5 2.5 5.0 2.2 8 11.5 50 0.20 0.6 3.5 5.0 ECA2GM010( ) 200 2000 ECA2GM2R2( ) 200 1000 3.3 10 12.5 54 0.20 0.6 5.0 5.0 ECA2GM3R3( ) 200 500 4.7 10 16 72 0.20 0.6 5.0 5.0 ECA2GM4R7( ) 200 500 10 10 20 115 0.20 0.6 5.0 5.0 ECA2GM100( ) 200 500 22 12.5 25 215 0.20 0.6 5.0 5.0 ECA2GM220( ) 200 500 33 16 25 275 0.20 0.8 7.5 7.5 ECA2GM330( ) 100 250 47 16 31.5 350 0.20 0.8 7.5 ECA2GM470 100 100 18 40 600 0.20 0.8 7.5 1 8 11.5 37 0.20 0.6 3.5 ECA2GM101 5.0 ECA2WM010( ) 50 200 1000 2.2 10 12.5 44 0.20 0.6 5.0 5.0 ECA2WM2R2( ) 200 500 3.3 10 16 60 0.20 0.6 5.0 5.0 ECA2WM3R3( ) 200 500 4.7 10 20 79 0.20 0.6 5.0 5.0 ECA2WM4R7( ) 200 500 10 12.5 20 130 0.20 0.6 5.0 5.0 ECA2WM100( ) 200 500 7.5 ECA2WM220( ) 100 250 ECA2WM330 100 22 16 25 210 0.20 0.8 7.5 33 16 31.5 285 0.20 0.8 7.5 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-115 - Aluminum Electrolytic Capacitors/ SU(Bi-polar) Radial Lead Type Series: SU(Bi-polar) Type: A Features Endurance : 85 C 2000 h RoHS directive compliant Specifications Category Temp. Range -40 C to +85 C Rated W.V. Range 6.3 V.DC to 50 V.DC Nominal Cap. Range 2.2 F to 6800 F Capacitance Tolerance 20 % (120 Hz/+20 C) I < 0.03 CV +3 (A) After 5 minutes DC Leakage Current tan d Please see the attached standard products list. After 2000 hours application of DC working voltage (1000 hours for each polarity) at +85 C2 C, when the capacitors are restored to 20 C, the capacitors shall meet the following limits. Capacitance change 20 % of initial measured value Endurance tan d < 150 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +85 C2 C with no voltage applied and then being stabilized at +20 C capacitors shall meet the limits specified in Endurance. (With voltage treatment) Shelf Life Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k to 0.70 1.00 1.30 1.70 Dimensions in mm (not to scale) fd0.05 (Unit : mm) L= 14 min. 08 0D0.5 3 min. 010 F0.5 Sleeve Pressure relief 06.3 0D0.5 = L16 : L1.0 L20 : L2.0 Body Dia. 0D 5 6.3 8 10 12.5 16 18 Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8 Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-116 - Aluminum Electrolytic Capacitors/ SU(Bi-polar) Standard Products (Bi-polar) Endurance: 85 C 2000 h (1000 hours for each polarity) Case size W.V. (V) 6.3 10 16 25 35 Cap. (20 %) Dia. (F) (mm) 330 470 1000 2200 3300 4700 6800 47 100 220 330 470 1000 2200 3300 4700 10 22 33 47 220 330 470 1000 2200 3300 10 22 33 47 100 220 330 470 1000 2200 10 22 33 47 100 220 330 470 8 10 10 12.5 16 16 18 5 6.3 8 10 10 12.5 16 16 18 5 5 5 6.3 10 10 10 12.5 16 18 5 5 6.3 6.3 8 10 12.5 12.5 16 18 5 6.3 8 8 10 12.5 12.5 12.5 Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 C) (+20 C) (mm) (mA r.m.s.) () 11.5 12.5 20 25 25 31.5 35.5 11 11.2 11.5 16 16 20 25 31.5 35.5 11 11 11 11.2 12.5 16 20 25 31.5 35.5 11 11 11.2 11.2 11.5 16 20 20 25 35.5 11 11.2 11.5 11.5 16 20 20 25 250 310 430 660 760 1170 1450 90 130 200 280 340 470 690 1090 1200 40 60 80 100 260 330 380 560 750 900 45 60 90 110 180 320 350 430 680 900 43 80 100 120 230 360 450 590 0.30 0.30 0.30 0.32 0.34 0.36 0.40 0.25 0.25 0.25 0.25 0.25 0.25 0.27 0.29 0.31 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.20 0.22 0.24 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.17 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping Taping B i (mm) (mm) (mm) 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.8 0.8 0.8 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.8 0.8 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.8 0.8 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.6 3.5 5.0 5.0 5.0 7.5 7.5 7.5 2.0 2.5 3.5 5.0 5.0 5.0 7.5 7.5 7.5 2.0 2.0 2.0 2.5 5.0 5.0 5.0 5.0 7.5 7.5 2.0 2.0 2.5 2.5 3.5 5.0 5.0 5.0 7.5 7.5 2.0 2.5 3.5 3.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 Part No. (mm) 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 ECEA0JN331U( ) ECEA0JN471X( ) ECEA0JN102U( ) ECEA0JN222U( ) ECEA0JN332U( ) ECEA0JN472U ECEA0JN682U ECEA1AN470U( ) ECEA1AN101X( ) ECEA1AN221U( ) ECEA1AN331U( ) ECEA1AN471U( ) ECEA1AN102X( ) ECEA1AN222U( ) ECEA1AN332U ECEA1AN472U ECEA1CN100U( ) ECEA1CN220U( ) ECEA1CN330U( ) ECEA1CN470U( ) ECEA1CN221X( ) ECEA1CN331U( ) ECEA1CN471U( ) ECEA1CN102U( ) ECEA1CN222U ECEA1CN332U ECEA1EN100U( ) ECEA1EN220X( ) ECEA1EN330U( ) ECEA1EN470U( ) ECEA1EN101U( ) ECEA1EN221U( ) ECEA1EN331U( ) ECEA1EN471U( ) ECEA1EN102U( ) ECEA1EN222U ECEA1VN100U( ) ECEA1VN220U( ) ECEA1VN330U( ) ECEA1VN470U( ) ECEA1VN101U( ) ECEA1VN221U( ) ECEA1VN331U( ) ECEA1VN471U( ) Straight Taping Leads (pcs) (pcs) 200 200 200 200 100 100 50 200 200 200 200 200 200 100 100 50 200 200 200 200 200 200 200 200 100 50 200 200 200 200 200 200 200 200 100 50 200 200 200 200 200 200 200 200 1000 500 500 500 250 2000 2000 1000 500 500 500 250 2000 2000 2000 2000 500 500 500 500 2000 2000 2000 2000 1000 500 500 500 250 2000 2000 1000 1000 500 500 500 500 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-117 - Aluminum Electrolytic Capacitors/ SU(Bi-polar) Standard Products (Bi-polar) Endurance: 85 C 2000 h (1000 hours for each polarity) Case size W.V. Cap. (20 %) Dia. (V) (F) (mm) 50 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 5 5 5 5 5 6.3 8 8 10 10 12.5 16 16 Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 C) (+20 C) (mm) (mA r.m.s.) () 11 11 11 11 11 11.2 11.5 11.5 12.5 20 25 25 31.5 10 10 18 25 30 50 90 110 140 250 360 450 590 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 0.15 Lead Length Lead Dia. Min. Packaging Q'ty Lead Space Straight Taping Taping B i (mm) (mm) (mm) (mm) 0.5 0.5 0.5 0.5 0.5 0.5 0.6 0.6 0.6 0.6 0.6 0.8 0.8 2.0 2.0 2.0 2.0 2.0 2.5 3.5 3.5 5.0 5.0 5.0 7.5 7.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 7.5 2.5 2.5 2.5 2.5 2.5 2.5 Part No. ECEA1HNR47U( ) ECEA1HN010U( ) ECEA1HN2R2U( ) ECEA1HN3R3U( ) ECEA1HN4R7U( ) ECEA1HN100U( ) ECEA1HN220U( ) ECEA1HN330U( ) ECEA1HN470U( ) ECEA1HN101U( ) ECEA1HN221U( ) ECEA1HN331U( ) ECEA1HN471U Straight Taping Leads (pcs) (pcs) 200 200 200 200 200 200 200 200 200 200 200 100 100 2000 2000 2000 2000 2000 2000 1000 1000 500 500 500 250 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-118 - Aluminum Electrolytic Capacitors/ KA Low Profile Radial Lead Type Series: KA Type: KA A 7 mm height M Features Endurance : 85 C 1000 h 7 mm height RoHS directive compliant Specifications Category Temp. Range -40 C to +85 C Rated W.V. Range 4 V.DC to 50 V.DC Nominal Cap. Range 2.2 F to 470 F Capacitance Tolerance 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) DC Leakage Current tan d Please see the attached standard products list After applying rated working voltage for 1000 hours at +85 C2 C when the capacitors are restored to 20 C, capacitors shall meet the following limits. Endurance Shelf Life Capacitance change 20% of initial measured value tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +85 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance (With voltage treatment) Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k to 0.70 1.00 1.30 1.70 Dimensions in mm (not to scale) Sleeve fd0.05 (Unit : mm) + L1.0 14 min. 3 min. 0D0.5 F0.5 - Body Dia. 0D 4 5 6.3 8 Lead Dia. 0d 0.45 0.45 0.45 0.45 Lead space F 1.5 2.0 2.5 2.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 - EEE-119 - Apr. 2014 Aluminum Electrolytic Capacitors/ KA Standard Products Endurance : 85 C 1000 h Case size W.V. (V) Cap. (20 %) (F) (mm) (mm) Straight Taping Leads (pcs) (pcs) 34 0.35 0.45 1.5 5.0 2.5 ECEA0GKA470( ) 200 2000 61 0.35 0.45 2.0 5.0 2.5 ECEA0GKA101( ) 200 2000 5.0 2.5 ECEA0GKA221( ) 200 2000 2.5 ECEA0GKA331( ) 200 1000 330 6.3 7 82 0.35 0.45 2.5 8 7 110 0.35 0.45 2.5 8 7 110 0.35 0.45 8 7 140 0.35 0.45 8 7 140 0.35 0.45 5.0 2.5 ECEA0GKA331Q 2.5 5.0 ECEA0GKA471( ) 1000 200 ECEA0GKA471Q 1000 1000 47 4 7 46 0.24 0.45 1.5 5.0 2.5 ECEA0JKA470( ) 200 2000 100 5 7 71 0.24 0.45 2.0 5.0 2.5 ECEA0JKA101( ) 200 2000 220 6.3 7 103 0.24 0.45 2.5 5.0 2.5 ECEA0JKA221( ) 200 2000 8 7 130 0.24 0.45 2.5 2.5 ECEA0JKA331( ) 200 1000 8 7 130 0.24 0.45 4 7 43 0.20 0.45 1.5 5.0 2.5 ECEA1AKA330( ) 200 2000 5.0 2.5 ECEA1AKA101( ) 200 2000 2.5 ECEA1AKA221( ) 200 1000 100 ECEA0JKA331Q 5.0 6.3 7 80 0.20 0.45 2.5 8 7 120 0.20 0.45 2.5 8 7 120 0.20 0.45 4 7 28 0.16 0.45 1000 ECEA1AKA221Q 5.0 1000 1.5 5.0 2.5 ECEA1CKA100( ) 200 2000 22 4 7 39 0.16 0.45 1.5 5.0 2.5 ECEA1CKA220( ) 200 2000 33 5 7 60 0.16 0.45 2.0 5.0 2.5 ECEA1CKA330( ) 200 2000 47 5 7 70 0.16 0.45 2.0 5.0 2.5 ECEA1CKA470( ) 200 2000 100 6.3 7 91 0.16 0.45 2.5 5.0 2.5 ECEA1CKA101( ) 200 2000 10 4 7 28 0.14 0.45 1.5 5.0 2.5 ECEA1EKA100( ) 200 2000 22 5 7 55 0.14 0.45 2.0 5.0 2.5 ECEA1EKA220( ) 200 2000 33 6.3 7 65 0.14 0.45 2.5 5.0 2.5 ECEA1EKA330( ) 200 2000 47 6.3 7 70 0.14 0.45 2.5 5.0 2.5 ECEA1EKA470( ) 200 2000 10 5 7 30 0.12 0.45 2.0 5.0 2.5 ECEA1VKA100( ) 200 2000 22 6.3 7 60 0.12 0.45 2.5 5.0 2.5 ECEA1VKA220( ) 200 2000 33 6.3 7 65 0.12 0.45 2.5 5.0 2.5 ECEA1VKA330( ) 200 2000 8 7 85 0.12 0.45 2.5 2.5 ECEA1VKA470( ) 200 1000 47 50 (mm) Part No. 7 10 35 (mm) Taping Taping B i 7 220 25 Straight 5 33 16 Lead Space 4 330 10 Lead Dia. Min. Packaging Q'ty 47 470 6.3 (mm) Lead Length 100 220 4 Dia. Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 C) (+20 C) (mm) (mA r.m.s.) 8 7 85 0.12 0.45 0.1 4 7 1 0.10 0.45 1.5 5.0 5.0 2.5 ECEA1VKA470Q ECEA1HKA0R1( ) 200 2000 1000 0.22 4 7 2 0.10 0.45 1.5 5.0 2.5 ECEA1HKAR22( ) 200 2000 0.33 4 7 3 0.10 0.45 1.5 5.0 2.5 ECEA1HKAR33( ) 200 2000 0.47 4 7 5 0.10 0.45 1.5 5.0 2.5 ECEA1HKAR47( ) 200 2000 1 4 7 10 0.10 0.45 1.5 5.0 2.5 ECEA1HKA010( ) 200 2000 2.2 4 7 16 0.10 0.45 1.5 5.0 2.5 ECEA1HKA2R2( ) 200 2000 3.3 4 7 18 0.10 0.45 1.5 5.0 2.5 ECEA1HKA3R3( ) 200 2000 4.7 4 7 23 0.10 0.45 1.5 5.0 2.5 ECEA1HKA4R7( ) 200 2000 10 5 7 35 0.10 0.45 2.0 5.0 2.5 ECEA1HKA100( ) 200 2000 5.0 2.5 ECEA1HKA220( ) 200 2000 2.5 ECEA1HKA330( ) 200 1000 22 33 6.3 7 60 0.10 0.45 2.5 8 7 75 0.10 0.45 2.5 8 7 75 0.10 0.45 5.0 ECEA1HKA330Q 1000 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 - EEE-120 - Apr. 2014 Aluminum Electrolytic Capacitors/ KA-(Bi-polar) Radial Lead Type Series: KA(Bi-polar) Type: A Features Endurance : 85 C 1000 h 7 mm height RoHS directive compliant Specifications Category Temp. Range -40 C to +85 C Rated W.V. Range 4 V.DC to 50 V.DC Nominal Cap. Range 2.2 F to 100 F Capacitance Tolerance 20 % (120 Hz/+20 C) I < 0.05 CV or 10 (A) After 2 minutes (Whichever is greater) DC Leakage Current tan d Please see the attached standard products list After 1000 hours application of DC working voltage (500 hours for each polarity) at +85 C2 C, when the capacitors are restored to 20 C, the capacitors shall meet the following limits. Endurance Capacitance change 20% of initial measured value tan d <200 % of initial specified value DC leakage current <initial specified value After storage for 1000 hours at +85 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance (With voltage treatment) Shelf Life Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k to 0.70 1.00 1.30 1.70 Dimensions in mm (not to scale) Sleeve 14 min. L1.0 0D0.5 3 min. F0.5 fd0.05 (Unit : mm) Body Dia. 0D 4 5 6.3 Lead Dia. 0d 0.45 0.45 0.45 Lead space F 1.5 2.0 2.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-121 - Aluminum Electrolytic Capacitors/ KA-(Bi-polar) Standard Products (Bi-polar) Endurance : 85 C 1000 h (500hours for each polarity) Case size W.V. Cap. (20 %) Dia. 0.45 2.5 5.0 2.5 0.24 0.45 2.0 5.0 2.5 38 0.24 0.45 2.0 5.0 46 0.24 0.45 2.5 5.0 25 0.20 0.45 1.5 7 61 5 7 29 33 5 7 47 6.3 7 10 4 7 50 Taping Taping B i 0.35 6.3 22 35 Straight (mm) 100 25 Lead Space (mm) 4 16 Lead Dia. Min. Packaging Q'ty (mm) (F) 10 Lead Length (mm) (V) 6.3 (mm) Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 C) (+20 C) (mm) (mA r.m.s.) Part No. Straight Taping Leads (pcs) (pcs) ECEA0GKN101( ) 200 2000 ECEA0JKN220( ) 200 2000 2.5 ECEA0JKN330( ) 200 2000 2.5 ECEA0JKN470( ) 200 2000 5.0 2.5 ECEA1AKN100( ) 200 2000 22 5 7 35 0.20 0.45 2.0 5.0 2.5 ECEA1AKN220( ) 200 2000 33 6.3 7 43 0.20 0.45 2.5 5.0 2.5 ECEA1AKN330( ) 200 2000 47 6.3 7 65 0.20 0.45 2.5 5.0 2.5 ECEA1AKN470( ) 200 2000 4.7 4 7 20 0.16 0.45 1.5 5.0 2.5 ECEA1CKN4R7( ) 200 2000 10 5 7 25 0.16 0.45 2.0 5.0 2.5 ECEA1CKN100( ) 200 2000 22 6.3 7 39 0.16 0.45 2.5 5.0 2.5 ECEA1CKN220( ) 200 2000 33 6.3 7 60 0.16 0.45 2.5 5.0 2.5 ECEA1CKN330( ) 200 2000 3.3 4 7 16 0.16 0.45 1.5 5.0 2.5 ECEA1EKN3R3( ) 200 2000 4.7 5 7 21 0.16 0.45 2.0 5.0 2.5 ECEA1EKN4R7( ) 200 2000 10 6.3 7 28 0.16 0.45 2.5 5.0 2.5 ECEA1EKN100( ) 200 2000 22 6.3 7 55 0.16 0.45 2.5 5.0 2.5 ECEA1EKN220( ) 200 2000 2.2 4 7 12 0.14 0.45 1.5 5.0 2.5 ECEA1VKN2R2( ) 200 2000 3.3 5 7 16 0.14 0.45 2.0 5.0 2.5 ECEA1VKN3R3( ) 200 2000 4.7 5 7 22 0.14 0.45 2.0 5.0 2.5 ECEA1VKN4R7( ) 200 2000 10 6.3 7 30 0.14 0.45 2.5 5.0 2.5 ECEA1VKN100( ) 200 2000 0.1 4 7 1 0.12 0.45 1.5 5.0 2.5 ECEA1HKN0R1( ) 200 2000 0.22 4 7 2 0.12 0.45 1.5 5.0 2.5 ECEA1HKNR22( ) 200 2000 0.33 4 7 3 0.12 0.45 1.5 5.0 2.5 ECEA1HKNR33( ) 200 2000 0.47 4 7 5 0.12 0.45 1.5 5.0 2.5 ECEA1HKNR47( ) 200 2000 1 4 7 10 0.12 0.45 1.5 5.0 2.5 ECEA1HKN010( ) 200 2000 2.2 5 7 16 0.12 0.45 2.0 5.0 2.5 ECEA1HKN2R2( ) 200 2000 3.3 5 7 16 0.12 0.45 2.0 5.0 2.5 ECEA1HKN3R3( ) 200 2000 4.7 6.3 7 23 0.12 0.45 2.5 5.0 2.5 ECEA1HKN4R7( ) 200 2000 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, 7.5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-122 - Aluminum Electrolytic Capacitors/ KS Low Profile Radial Lead Type Series: KS Type: KS A 5 mm height KA 7 mm height Features Endurance : 85 C 1000 h 5 mm height RoHS directive compliant M Specifications Category Temp. Range -40 C to +85 C Rated W.V. Range 4 V.DC to 50 V.DC Nominal Cap. Range 2.2 F to 330 F Capacitance Tolerance 20 % (120 Hz/+20 C) I < 0.01 CV or 3 (A) After 2 minutes (Whichever is greater) DC Leakage Current tan d Please see the attached standard products list After applying rated working voltage for 1000 hours at +85 C2 C, when the capacitors are restored to 20C capacitors, shall meet the following limits. Endurance Shelf Life Capacitance change 20% of initial measured value (4 V : 30 %) tan d < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +85 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance (With voltage treatment) Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k to 0.70 1.00 1.30 1.70 Dimensions in mm (not to scale) Sleeve fd0.05 (Unit : mm) + L1.0 14 min. 3 min. 0D0.5 F0.5 - Body Dia. 0D 4 5 6.3 8 Lead Dia. 0d 0.45 0.45 0.45 0.45 Lead space F 1.5 2.0 2.5 2.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-123 - Aluminum Electrolytic Capacitors/ KS Standard Products Endurance : 85 C 1000 h Case size W.V. (V) 4 6.3 Cap. (20 %) (F) 33 47 100 220 22 33 47 100 330 10 22 33 47 100 220 16 10 22 33 47 100 25 4.7 10 22 33 100 35 3.3 4.7 10 22 33 47 50 0.1 0.22 0.33 0.47 1 2.2 3.3 4.7 10 22 Dia. (mm) 4 4 5 6.3 4 5 5 6.3 8 8 5 5 6.3 6.3 8 8 4 5 6.3 6.3 8 8 4 5 6.3 6.3 8 8 4 4 5 6.3 8 8 8 8 4 4 4 4 4 4 4 5 6.3 8 8 Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 C) (+20 C) (mm) (mA r.m.s.) 5 26 0.35 5 34 0.35 5 61 0.35 5 82 0.35 5 29 0.24 5 38 0.24 5 46 0.24 5 71 0.24 5 130 0.24 5 130 0.24 5 35 0.20 5 43 0.20 5 65 0.20 5 80 0.20 5 120 0.20 5 120 0.20 5 28 0.16 5 39 0.16 5 60 0.16 5 70 0.16 5 91 0.16 5 91 0.16 5 22 0.14 5 28 0.14 5 55 0.14 5 65 0.14 5 85 0.14 5 85 0.14 5 16 0.12 5 22 0.12 5 30 0.12 5 60 0.12 5 65 0.12 5 65 0.12 5 85 0.12 5 85 0.12 5 1 0.10 5 2 0.10 5 3 0.10 5 5 0.10 5 10 0.10 5 16 0.10 5 16 0.10 5 23 0.10 5 35 0.10 5 60 0.10 5 60 0.10 Lead Length Lead Dia. Lead Space Straight (mm) 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 0.45 Min. Packaging Q'ty Taping Taping B i (mm) 1.5 1.5 2.0 2.5 1.5 2.0 2.0 2.5 2.5 2.0 2.0 2.5 2.5 2.5 1.5 2.0 2.5 2.5 2.5 1.5 2.0 2.5 2.5 2.5 1.5 1.5 2.0 2.5 2.5 (mm) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 (mm) 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 5.0 2.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.0 2.5 2.5 2.5 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 2.5 Part No. ECEA0GKS330( ) ECEA0GKS470( ) ECEA0GKS101( ) ECEA0GKS221( ) ECEA0JKS220( ) ECEA0JKS330( ) ECEA0JKS470( ) ECEA0JKS101( ) ECEA0JKS331( ) ECEA0JKS331Q ECEA1AKS220( ) ECEA1AKS330( ) ECEA1AKS470( ) ECEA1AKS101( ) ECEA1AKS221( ) ECEA1AKS221Q ECEA1CKS100( ) ECEA1CKS220( ) ECEA1CKS330( ) ECEA1CKS470( ) ECEA1CKS101( ) ECEA1CKS101Q ECEA1EKS4R7( ) ECEA1EKS100( ) ECEA1EKS220( ) ECEA1EKS330( ) ECEA1EKS101( ) ECEA1EKS101Q ECEA1VKS3R3( ) ECEA1VKS4R7( ) ECEA1VKS100( ) ECEA1VKS220( ) ECEA1VKS330( ) ECEA1VKS330Q ECEA1VKS470( ) ECEA1VKS470Q ECEA1HKS0R1( ) ECEA1HKSR22( ) ECEA1HKSR33( ) ECEA1HKSR47( ) ECEA1HKS010( ) ECEA1HKS2R2( ) ECEA1HKS3R3( ) ECEA1HKS4R7( ) ECEA1HKS100( ) ECEA1HKS220( ) ECEA1HKS220Q Straight Taping Leads (pcs) 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 200 (pcs) 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 2000 2000 2000 2000 1000 1000 2000 2000 2000 2000 1000 1000 2000 2000 2000 2000 1000 1000 2000 2000 2000 2000 1000 1000 1000 1000 2000 2000 2000 2000 2000 2000 2000 2000 2000 1000 1000 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-124 - Aluminum Electrolytic Capacitors/ KS-(Bi-polar) Radial Lead Type Series: KS(Bi-polar) Type: A Features Endurance : 85 C 1000 h 5 mm height RoHS directive compliant Specifications Category Temp. Range -40 C to +85 C Rated W.V. Range 63 V.DC to 50 V.DC Nominal Cap. Range 2.2 F to 47 F Capacitance Tolerance 20 % (120 Hz/+20 C) I < 0.05 CV or 10 (A) After 2 minutes (Whichever is greater) DC Leakage Current tan d Please see the attached standard products list After 1000 hours application of DC working voltage (500 hours for each polarity) at +85 C2 C, when the capacitors are restored to 20 C, the capacitors shall meet the following limits. Endurance Capacitance change 20% of initial measured value tan d <200 % of initial specified value DC leakage current <initial specified value After storage for 1000 hours at +85 C2 C with no voltage applied and then being stabilized at +20 C, capacitors shall meet the limits specified in Endurance (With voltage treatment) Shelf Life Frequency correction factor for ripple current Frequency (Hz) Correction factor 50, 60 120 1k 10 k to 0.70 1.00 1.30 1.70 Dimensions in mm (not to scale) Sleeve L1.0 14 min. 0D0.5 3 min. F0.5 fd0.05 (Unit : mm) Body Dia. 0D 4 5 6.3 Lead Dia. 0d 0.45 0.45 0.45 Lead space F 1.5 2.0 2.5 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-125 - Aluminum Electrolytic Capacitors/ KS-(Bi-polar) Standard Products (Bi-polar) Endurance : 85 C 1000 h (500hours for each polarity) Case size W.V. Cap. (20 %) Dia. (V) (F) 22 5 5 29 0.24 6.3 33 6.3 5 38 0.24 10 16 (mm) Specification Ripple tan d Current Length (120 Hz) (120 Hz) (+85 C) (+20 C) (mm) (mA r.m.s.) Lead Length Lead Dia. Lead Space Straight (mm) Min. Packaging Q'ty Taping Taping B i (mm) (mm) (mm) 0.45 2.0 5.0 2.5 0.45 2.5 5.0 2.5 Part No. Straight Taping Leads (pcs) (pcs) ECEA0JSN220( ) 200 2000 ECEA0JSN330( ) 200 2000 47 6.3 5 46 0.24 0.45 2.5 5.0 2.5 ECEA0JSN470( ) 200 2000 10 4 5 25 0.20 0.45 1.5 5.0 2.5 ECEA1ASN100( ) 200 2000 22 6.3 5 35 0.20 0.45 2.5 5.0 2.5 ECEA1ASN220( ) 200 2000 33 6.3 5 43 0.20 0.45 2.5 5.0 2.5 ECEA1ASN330( ) 200 2000 4.7 4 5 20 0.20 0.45 1.5 5.0 2.5 ECEA1CSN4R7( ) 200 2000 10 5 5 25 0.20 0.45 2.0 5.0 2.5 ECEA1CSN100( ) 200 2000 22 6.3 5 39 0.20 0.45 2.5 5.0 2.5 ECEA1CSN220( ) 200 2000 3.3 5 5 18 0.20 0.45 2.0 5.0 2.5 ECEA1ESN3R3( ) 200 2000 25 4.7 5 5 21 0.20 0.45 2.0 5.0 2.5 ECEA1ESN4R7( ) 200 2000 10 6.3 5 28 0.20 0.45 2.5 5.0 2.5 ECEA1ESN100( ) 200 2000 35 2.2 4 5 12 0.20 0.45 1.5 5.0 2.5 ECEA1VSN2R2( ) 200 2000 50 0.1 4 5 1 0.20 0.45 1.5 5.0 2.5 ECEA1HSN0R1( ) 200 2000 0.22 4 5 2 0.20 0.45 1.5 5.0 2.5 ECEA1HSNR22( ) 200 2000 0.33 4 5 3 0.20 0.45 1.5 5.0 2.5 ECEA1HSNR33( ) 200 2000 0.47 4 5 5 0.20 0.45 1.5 5.0 2.5 ECEA1HSNR47( ) 200 2000 1 4 5 10 0.20 0.45 1.5 5.0 2.5 ECEA1HSN010( ) 200 2000 2.2 5 5 16 0.20 0.45 2.0 5.0 2.5 ECEA1HSN2R2( ) 200 2000 * When requesting taped product, please put the letter "B" or "i" between the "( )". Lead wire pitch B=5 mm, i=2.5 mm. * Please refer to the page of "Taping Dimensions". Please kindly accept last shipment : 31/Mar/2015 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 02 May. 2014 - EEE-126 - Aluminum Electrolytic Capacitors Notices Applicable laws and regulations This product satisfies the requirements of the RoHS Directive (2011/65/EU) (related to the specified hazardous substances contained in electrical and electronic equipment). The ozone-depleting chemicals regulated by the Montreal Protocol are not intentionally used in the materials used in our manufacturing processes. PBBs(Poly-Brominated Biphenyls)/PBDEs (Poly-Brominated Diphenyl ethers) The above specified brominated flame retardants are not intentionally used. When exporting this product, observe the export procedures specified in export control laws such as the Foreign Exchange and Foreign Trade Control Law. Limited applications This product is intended to be used for general-purpose standard applications for general electronic equipment (such as AV equipment, household appliances, business or office equipment, information or communications equipment, etc.) If this product is being examined for possible use in applications where higher reliability or safety is required, in cases where a malfunction of this product may endanger life or property, then the delivery specifications meeting the application requirements must be agreed to and exchanged. Items to be observed (1) The purpose of these specifications is to ensure the quality of components as individual components. Before use, check and evaluate their operation when mounted on your products. (2) Do not use our components outside of the corresponding specifications. When using this capacitor in a product where safety is critical We take great care in the quality of this product. However, performance may deteriorate and short-circuiting or open-circuiting may occur if it will be used in transportation equipment (e.g. trains, cars, traffic lights), medical equipment, airborne equipment, aerospace equipment, electric heating appliances, combustion/ gas equipment, rotating equipment, disaster/crime prevention equipment, or other equipment where a defect in this component may cause the loss of human life or other significant damage. Ensure that the target equipment has a failsafe design and is provided with the following systems to guarantee adequate safety. (1) * Ensure the safety of the whole system by installing a protection circuit and a protection device. (2) Redundant circuits, etc. to maintain the safety of the entire system so that a single independent failure will not lead to unsafe conditions. Conditions of use This product is intended to be used in electronic equipment for general-purpose standard applications and is not designed for use in any special environments. When this capacitor is used in a special environment or under special conditions, its performance may be affected. Before use, verify the performance and reliability of the capacitor. Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - EEE-166 - 03 May. 2014 Aluminum Electrolytic Capacitors Application Guidelines 1. Circuit design Verify the usage and fitting environments and make sure to observe the rated performance specified in the corresponding catalog or specifications. 1.1 Operating temperature and frequency Variations in temperature and frequency can affect the electrical characteristics of capacitors. Design circuits allowing for these variations. (1) At high temperatures leakage current increases. (2) At low temperatures the capacitance decreases and an increase in the tangent of the loss angle and impedance. (3) As frequency increases, capacitance decreases and the tangent of the loss angle increases, while the capacitive portion of impedance decreases till the resonant frequency is reached. (4) At low frequency there is temperature rise caused by ripple currents accompanying the increase in equivalent series resistance. 1.2 Operating temperature and life expectancy (1) The capacitor life is affected by usage temperature. In general, the capacitor life is approximately doubled when the temperature decreases by 10 C. Reduce the usage temperature as much as possible. (2) The use of capacitors beyond the upper category temperatures may cause rapid deterioration in the characteristics and break down may occur. The temperature referred to here includes the ambient temperature(within equipment), including heat produced by heat generating devices (power transistors, resistors, etc.), self-heating due to ripple currents, etc. Take these factors into consideration when checking the temperature of capacitors. Do not place any heat generating devices, etc. on the back of capacitors. (3) The life acceleration can be calculated with the following equation: L2 = L1x2 T1-T2 10 L1 : Life at a temperature T1 C (h) L2 : Life at a temperature T2 C (h) T1 : Category upper limit temperature + heat generation due to ripple currents (C) T2 : Ambient temperature to calculate the life + heat generation due to ripple currents (C) 1.3 Common application conditions to avoid If the loads shown below are applied to a capacitor, then its characteristics may degrade rapidly or it may short-circuit. Rapid heat or gas generation may occur, which leads to the activation of the pressure valve. Electrolytes will then leak from the sealing section. In the worst case, an explosion or ignition may occur. When the capacitor breaks down, combustible materials (electrolytes, element fixing materials, etc.) may flow externally in all directions. (1) Polarity Aluminum electrolytic capacitors have polarities. Do not apply a reversed or alternating-current voltage. If the polarity is reversed, then short-circuiting may occur in the initial state or the pressure valve may be activated, leading to capacitor breakdown. Check the polarity when using a polar capacitor. If the polarity is unstable or unclear in a circuit, then use bipolar capacitors. However, bipolar capacitors cannot be used in alternating current circuits. (2) Applied voltage Do not apply an excessive voltage (voltage exceeding the rating). The peak direct current voltage superposed with a ripple voltage (alternating current component) must be equal to or less than the rated voltage. A surge voltage exceeding the rated voltage is allowed and specified. However, the allowable conditions are limited and the specifications do not guarantee the application of such a surge voltage for a long time. (3) Ripple current Do not allow an excessive current (current exceeding the rated ripple current) to pass. If an excessive ripple current passes through, then the amount of internally generated heat will grow, the capacitor life will be reduced, or the pressure valve will be activated, leading to breakdown. Even if the current is equivalent to or less than the allowable level, a reversed voltage may be applied when a direct current bias voltage is low. Use capacitors so that a reversed voltage is not applied. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 May. 2014 - EEE-167 - Aluminum Electrolytic Capacitors (4) Charging/discharging applications Standard capacitors are not suitable for use in repeating charge/discharge applications. For charge/discharge applications, consult us with your actual application condition. For rush current, please to nor exceed 100 A. (5) ON-OFF circuit Do not use capacitors in circuit where ON-OFF switching is repeated more than 10000 times/per day. In case of applying to the theses ON-OFF circuit, consult with us about circuit condition and so on. (6) Series/parallel connection [Parallel connection] If capacitors are connected in parallel, then the balance of currents between these capacitors may be disrupted and an excessive ripple current may pass through only part of these capacitors. Wire your circuits such that excessive ripple current does not pass through the capacitors. [Series connection] If capacitors are connected in series, then the balance of voltages between these capacitors may be disrupted and excessive voltage may be applied. Add a bleeder resistor in parallel with each capacitor. By taking leak currents into consideration the balance of voltages will not be disrupted. (7) Electrical isolation of the capacitors Isolate capacitors completely in a circuit in the following cases. Between the housing and cathode and anode terminals and between circuit traces. (8) Capacitor sleeve Exterior sleeves or lamination covering capacitors are for indication purposes only and do not guarantee electrical insulation. 1.4 Capacitor mounting considerations For aluminum electrolytic capacitors, conductive electrolysis whose main solvent is combustible organic solvent and combustible electrolytic paper is used. If the electrolysis leaks onto a printed circuit board, then it may corrode or short-circuit the traces, leading to smoke or fire. Check the following points when designing products. (1) Double-sided circuit board If capacitors are used in double-sided boards, then do not lay wiring traces immediately below the capacitors. If the sealed part of a capacitor adheres to the surface of a through-hole printed circuit board, then the solder may be absorbed into the gap during dip soldering and the anode and cathode terminals may be short-circuited. (2) Circuit board hole positioning Solder may protrude from the through-holes or holes for post-mounted component leads and damage the capacitor exterior sleeves. Be mindful of the hole positions. (3) Circuit board hole spacing Make holes for capacitors with a gap equivalent to that of capacitor leads (terminals) during design. Otherwise, there will be stress on the capacitor leads when they are inserted into these holes, leading to current leaks, short-circuiting, or electrolysis leakage. (4) Surface-mount types For surface-mount type capacitors, design land traces with reference to the recommended board land sizes described in the delivery specifications, etc. (5) Capacitors equipped with pressure valves Provide a space above the pressure valve so that it can operate properly. For capacitors equipped with a pressure valve (as per the shape and dimensional descriptions of each series), provide a space as follows. If the space is smaller than the requirements, then the pressure valve may not operate properly, leading to an explosion. Product diameter 06.3 to 016 mm 018 to 035 mm 040 mm or more Space 2 mm or more 3 mm or more 5 mm or more (6) Clearance for seal mounted pressure relief vents When the pressure valve section of a capacitor faces the printed wiring, provide a degassing hole aligned with the pressure valve position for proper operation of the valve. (7) Wiring near the pressure relief vent. Considerations must be taken in designing circuits so that there are no traces, particularly for high-voltage or largecurrent wiring, above the pressure valve sections. When a pressure valve is activated, combustible high-temperature gas exceeding 100C will be released. Gas may condense or the wiring covers may melt and secondary accidents may occur. (8) Circuit board patterns under the capacitor. If electrolysis leaks, then the circuit traces may shor t-circuit and tracking or migration may occur. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 May. 2014 - EEE-168 - Aluminum Electrolytic Capacitors 2. Mounting 2.1 Considerations before using (1) Do not reuse capacitors that have been installed and energized. (2) Capacitors may generate transient recovery voltages. In this case, discharge them using a resistor of approx. 1 k. (3) Capacitors stored for a long time may have a larger current leak. In this case, dispose the voltage using a resistor of approx. 1 k. (4) Do not drop capacitors onto a floor, etc. Do not use dropped capacitors because they may be damaged mechanically or electrically. (5) Do not use corrupted capacitors. If a capacitor s seal is deteriorated, then its performance will be degraded, life reduced, and/or the electrolyte will leak. 2.2 Capacitor insertion (1) Check the capacitor ratings (capacitance and voltage) before mounting. (2) Check the capacitor polarity before mounting. (3) Check the capacitor lead and hole intervals and land size before mounting. If these intervals are different, then stress will be applied to the inside of the capacitor through its leads when they are inserted into the board holes, leading to short-circuiting or other failures. (4) When an automatic mounter is used, the force to clinch and fix capacitor leads must not be excessive. When capacitor leads are clinched and fixed onto a circuit board, the leads may be pulled and a large force applied to the capacitor if there are missing cogs or the gap between the clinching section and the circuit board is too small. If this is the case, then the capacitor may break down. For surface-mount type capacitors, if the mounting pressure is excessive, then current leaks may increase, short-circuiting may occur, or the capacitor may break down and come off. 2.3 Manual soldering (1) Solder capacitors under the soldering conditions (temperature and time) as described in the specifications or at 350 C for three seconds or less. (2) If the capacitor lead terminals must be pre-processed in order to align the gaps between the terminals and holes, place them before soldering to prevent stress from being applied to the capacitor body. (3) If it is necessary to manually remove soldered capacitors, repair them after the solder has sufficiently melted to prevent stress from being applied to the capacitor terminals. (4) Do not touch the capacitor body with the soldering iron tip. Otherwise, a hole may occur on the capacitor exterior sleeve. The sleeve may break or become damaged. 2.4 Flow soldering (1) Do not immerse the capacitor body in a solder bath. The capacitor's inner pressure could increase and the capacitor will break down. (2) Solder capacitors under the soldering conditions (temperature and time) described in the specifications. (3) When soldering, do not allow other components to fall or touch the capacitors. When soldering, if resistors, ceramic capacitors, or other components (with a high heat conductance) fall and their lead terminals or metallic sections touch the capacitor, then local thermal stress can occur causing the capacitor's exterior sleeve to break down. This phenomenon is identical to short-circuiting. (4) Prevent flux from adhering to anything other than the terminals. 2.5 Reflow soldering for chip capacitors (1) Surface-mount type capacitor are exclusively for reflow soldering. When reflow solder is used an ambient heat condition system such as the simultaneous use of infrared and hot-air is recommended. This system cannot be used for flow or dip soldering. (2) Soldering capacitors under the soldering conditions (pre-heating, soldering temperature and time) described in the specifications. (3) Reflow-solder only once. If you need to apply reflow soldering twice, then make sure to contact us. (4) Do not reuse the installed surface-mount type capacitors. (5) The crack on top marking might be occurred by reflow heat stress. But please acknowledge that it does not influence the reliability of the product. (6) VPS (Vapor Phase Soldering) reflow can cause significant characteristics change and/ or mounting failure due to deformation by acute temperature rise. VPS is acceptable provided that the process does not exceed recommended reflow profile and temperature rise is less than 3degC/sec. Please contact Panasonic for detailed conditions. 2.6 Other soldering considerations If the chip capacitor temperature becomes very high due to pre-heating or hardening of the fixing resin, then the capacitor exterior sleeve may shrink or crack. If capacitors are passed through a heat-curing furnace, then the ambient temperature must be 150C or less and the duration must be two minutes or less. 2.7 Capacitor handling after soldering (1) Do not tilt, bring down, or twist the capacitors soldered to the printed circuit board; otherwise a torque will be generated with the capacitor circumference as the fulcrum. As a result, a large force will be applied to the inside of the element through the terminals and the capacitor may break down. (2) Do not hold the capacitors soldered to the printed circuit board to carry the board; otherwise the board s entire weight will be applied to the inside of the element through the terminals and the capacitor may break down. (3) Do not hit the capacitors soldered to the printed circuit board with foreign objects. When stacking printed circuit boards, do not hit the capacitors with circuit boards or other components (terminals, etc.) Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 May. 2014 - EEE-169 - Aluminum Electrolytic Capacitors 2.8 Circuit board cleaning (1) Apply the following conditions to flux cleaning after soldering Temperature: 60C or less, duration: Five minutes or less (Ultrasonic waves may be used.) However, rinse sufficiently and dry the boards (at 100C for 20 minutes or less). [Applicable solvents] Pine Alpha ST-100S Clean-thru 750H, 750L, or 710M Aqua Cleaner 210SEP Sunelec B-12 DK Beclear CW-5790 Techno Cleaner 219 Cold Cleaner P3-375 Telpen Cleaner EC-7R Techno Care FRW-17, FRW-1, or FRV-1 Isopropyl alcohol (IPA) Remarks 1 : If you wish to use solvents other than the above or Deionized water, please contact us. 2 : Please do not use ozone-depleting chemicals in order to protect the environment. 3 : Depending on the cleaning method, the marking on a capacitor may be erased or blurred. (2) Avoid using the following solvent groups unless specifically allowed for in the specification (a) Halogen solvents: Corrode the inside capacitors. The solvent may enter (diffuse) inside the capacitor, decompose and cause a reaction. Then, the released chlorine ions may react with the aluminum and corrode it. For capacitors for which we guarantee cleaning, use solvents under the cleaning conditions (temperature, time, etc.) described in the specifications. (b) Alkaline solvents: Corrode (melt) aluminum housings. (c) Petroleum solvents: Deteriorate sealing rubber. (d) Xylene solvents: Deteriorate sealing rubber. (e) Acetone: Erases indications. (3) Be sure to dry the printed circuit boards immediately after cleaning so that the solvent does not remain between the capacitor's sealed section and the circuit board. (4) Manage the contamination of solvents (conductance, PH, specific gravity, amount of water, etc.) If the solvent is contaminated, then the chlorine concentration will become high and the inside capacitor may be corroded. Control the flux concentration against the solvent to 2 %wt or less. 2.9 Mounting adhesives and coating agents (1) If bond or coating agents are used to fix capacitors or prevent moisture, then solvents contained in these materials may corrode the capacitors. Select solvents other than halogen compounds. Do not use chloroprene-derived polymers. Also, if the bond and coating material containing organic solvents, such as xylene and toluene, are used, resin of the top plate of a snap-in terminal type capacitor will be dissolved. In this case please select part number without the top plate. (2) If fixing or coating agents are used for capacitors, then check the following points. (a) Do not allow flux residue or contaminants to remain between the capacitor's sealed section and the circuit board. (b) Harden and dry bond or coating agents so that the solvents do not remain. Do not completely block the sealed section of a capacitor. (At least 1/3 of the sealed section must be exposed.) 2.10 Fumigation process When electronic equipment incorporating aluminum electrolytic capacitors is exported, wooden packing materials may be fumigated using halogen compounds such as bromomethane. If drying after the fumigation process is insufficient, halogen remaining in the packing materials may be released, enter and corrode the capacitors. If the fumigation process is carried out, then check carefully for remaining halogen after processing and drying. Make sure not to apply the fumigation process to completely packed electronic equipment. 3. Precautions for using capacitors 3.1 Environmental Conditions Capacitors should not be stored or used in the following environments. (1) Exposure to temperatures above the upper category or below the lower category temperature of the capacitor. (2) Direct contact with water, salt water, or oil. (3) High humidity conditions where water could condense on the capacitor. (4) Exposure to toxic gases such as hydrogen sulfide, sulfuric acid, nitric acid, chlorine, Chlorine compound, Bromine, Bromine compound or ammonia. (5) Exposure to ozone, radiation, or ultraviolet rays. (6) Vibration and shock conditions exceeding specified requirements. Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 03 May. 2014 - EEE-170 - Aluminum Electrolytic Capacitors 3.2 Electrical Precautions (1) Do not touch the capacitor terminals directly. If you touch the capacitor terminals, you will receive an electric shock. Do not touch the exposed aluminum sections of a capacitor, such as the pressure valve sections because they are not insulated. (2) Do not short-circuit the capacitor terminals. Do not spill conductive solutions such as acidic or alkaline solutions on the capacitors. Otherwise, short-circuiting will occur. The circuit will malfunction and the capacitors break down. (3) A low-molecular-weight-siloxane which is included in a silicon material shall causes abnormal electrical characteristics. 4. Precautions for checks and maintenance (1) Periodically check the capacitors used in industrial equipment. When checking and maintaining capacitors, turn off the equipment and discharge the capacitors beforehand. In this case, do not apply stress to the capacitor lead terminals, etc. (2) Periodically check the following items. (a) Significant appearance abnormalities (deformation, electrolysis leakage, etc.) (b) Electrical characteristics (described in the corresponding catalog or delivery specifi cations) If any abnormalities are found, then replace the capacitors or take appropriate actions. 5. Emergency procedures (1) Capacitors of a certain size or larger are equipped with a pressure valve to release excessive pressure. If the capacitor pressure valve is activated and gas becomes visible when using equipment, then turn off the equipment or unplug it. If the power is not turned off, then the short-circuited capacitors may damage the circuit or the gas may become liquefied and cause a short-circuit. In the worst case, secondary disasters such as equipment damage may occur. Gases released from the capacitor s pressure valve is not fume but liquefi ed electrolysis. (2) When a pressure valve is activated, a high-temperature gas exceeding 100 C will be released. Do not place your face close to the capacitor. If the gas gets into your eyes or you inhale it, then immediately wash your eyes with water or gargle. If the gas comes in contact with your skin, then wash it with soap. 6. Long Term Storage (1) Leakage current of a capacitor increases with long storage times. The aluminum oxide fi lm deteriorates as a function of temperature and time. If used without reconditioning, an abnormally high current will be required to restore the oxide fi lm. This surge current could cause the circuit or the capacitor to fail. Storage period is one year. When storage period is over 12 months, a capacitor should be reconditioned by applying the rated voltage in series with a 1000 current limiting resistor for a time period of 30 minutes. For storage condition, keep room temperature (5 C to 35 C) and humidity (45% to 85%) where direct sunshine doesn't reach. (2) Environmental Conditions (a) Exposure to temperatures above the upper category or below the lower category temperature of the capacitor. (b) Direct contact with water, salt water, or oil (c) High humidity conditions where water could condense on the capacitor. (d) Exposure to toxic gases such as hydrogen sulfi de, sulfuric acid, nitric acid, chlorine, Chlorine compound, Bromine, Bromine compound or ammonia. (e) Exposure to ozone, radiation, or ultraviolet rays. (f) Vibration and shock conditions exceeding specifi ed requirements. 7. Discarding When discarding capacitors, use either of the following procedures. (1) Make holes on the capacitor or break it up completely. Then burn it at a temperature of 800C or higher. If capacitors are burnt as is, then they may explode. (2) If you do not burn them, then ask professional waste disposer. The precautions in using aluminum electrolytic capacitors follow the Precautionary Guidelines for the Use of Fixed Aluminum Electrolytic Capacitors for Electronic equipment, RCR-2367B issued by EIAJ in March 2002. Please refer to the above guidelines for details. * Intellectual property right We, Panasonic Group are providing the product and service that customers can use without anxiety, and are working positively on the protection of our products under intellectual property rights. Representative patents relating to Conductive Polymer Hybrid Aluminum Electrolytic Capacitors are as follows : US Patent Nos. 7497879 and 7621970 JP Patent No. 5360250 Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. - EEE-171 - 03 May. 2014 Aluminum Electrolytic Capacitors Lead Taping Radial Lead Type Dimensions in mm (not to scale) Lead space (F) 2.5 mm 5.0 mm 7.5 mm Case size x 5L B A 04 x 5L B A 05 C A 06.3 x 5L x 5L C E 08 x 7L B A 04 x 7L B A 05 C A 06.3 x 7L x 7L C E 08 x 11L C D 05 C D 06.3 x 11.2L, 15L x 11.5L, 15L, 20L E 08 F 010 x 12.5L, 16L, 20L, 25L G 012.5 x 15L, 20L, 25L H 016 x 15L, 20L, 25L H 018 x 15L, 20L, 25L Figure A (Lead space: 5.0 mm / 0DxL : 04x5, 7, 05x5, 7, 06.3x5, 7) 12.71.0 fD 1.0 1.0 16.00.5 9.00.5 F Nominal Tolerance 0d 0.45 0.05 F 5.0 +0.8 -0.2 P1 3.85 0.50 17.50+0.75 -0.20 fd P1 (Unit : mm) Dimensions 0.60.3 6.0 0 to 1.5 18.00.5 L 6.351.0 f4.00.2 12.70.2 Figure B (Lead space: 2.5 mm / 0DxL : 04x5, 7, 05x5, 7) 12.71.0 6.351.0 1.0 fD 1.0 9.00.5 F Nominal Tolerance 0d 0.45 0.05 F 2.5 0.5 P1 5.1 0.5 04.00.2 0.60.3 0d P1 Dimensions 18.50+0.75 -0.50 6.0 0 to 1.5 18.00.5 L (Unit : mm) 12.70.2 Figure C (Lead space: 2.5 mm / 0DxL : 05x11, 06.3x5, 7, 11.2, 15, 08x5, 7) 12.71.0 1.0 fD 1.0 f4.00.2 Dimensions Nominal (Unit : mm) Tolerance 0d 0.45(5x11, 6.3x11.2, 15 : 0.50) 0.05 F 2.5 0.5 P1 5.1 0.5 0.60.3 9.00.5 P1 F 18.50+0.75 -0.50 fd 6.0 18.00.5 0 to 1.5 L 6.351.0 12.70.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2014 - EEE-175 - Aluminum Electrolytic Capacitors Figure D (Lead space: 5 mm / 0DxL : 05x11, 06.3x11.2, 15) 12.71.0 fD 1.0 1.0 Nominal 0d 0.50 F 5.0 P1 3.85 Tolerance 0.05 +0.8 -0.2 0.50 0.60.3 9.00.5 F 16.00.5 fd P1 (Unit : mm) Dimensions 18.50+0.75 -0.50 6.0 0 to 1.5 18.00.5 L 6.351.0 f4.00.2 12.70.2 Figure E (Lead space: 5 mm / 0DxL : 08x5, 7, 11.5, 15, 20) 12.71.0 fD 1.0 6.0 0 to 1.5 Dimensions 0.60.3 F H P1 16.00.5 fd 9.00.5 18.00.5 (Unit : mm) 1.0 L 6.351.0 f4.00.2 12.70.2 Nominal 08x11.5 to 20 08x5, 7 Suffix code B BQ 0d 0.60 0.45 F 5.0 P1 3.85 H 20.00 Tolerance 0.05 +0.8 -0.2 0.50 18.50 +0.75 -0.50 Figure F (Lead space: 5 mm / 0DxL : 010x12.5, 16, 20, 25) 12.71.0 1.0 fD 1.0 (Unit : mm) f4.00.2 Dimensions Nominal Tolerance 0d 0.60 0.05 F 5.0 +0.8 -0.2 P1 3.85 0.50 0.60.3 9.00.5 P1 F 18.50+0.75 -0.50 fd 6.0 18.00.5 0 to 1.5 L 6.351.0 12.70.2 Figure G (Lead space: 5 mm / 0DxL : 012.5x15, 20, 25) 15.01.0 1.0 fD 1.0 f4.00.2 (Unit : mm) Dimensions Nominal 0d 0.60 Tolerance 0.05 F 5.0 +0.8 -0.2 P1 5.0 0.5 0.60.3 9.00.5 18.50+0.75 -0.50 fd P1 F 6.0 18.00.5 0 to 1.5 L 7.51.0 15.00.2 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2014 - EEE-176 - Aluminum Electrolytic Capacitors Figure H (Lead space: 7.5 mm / 0DxL : 016x15, 20, 25, 018x15, 20, 25) 7.51.0 1.3 30.01.0 fD 2.0 (Unit : mm) 2.0 Dimensions Nominal Tolerance 0d 0.80 0.05 F 7.5 0.5 P1 3.75 0.50 0.60.3 15.00.2 18.50+0.75 -0.50 F 9.00.5 P1 fd 6.0 18.00.5 0 to 1.5 L 1.3 f4.00.2 Packaging Specifications Dimensions of Outer Carton Box b c Dimensions (mm) a (Unit : mm) 04 to 05 06.3 08 010, 012.5 016, 018 a 340 max. 340 max. 340 max. 340 max. 340 max. b to 55 max. to 55 max. to 55 max. 55 to 66 max. 62 to 75 max. c 170 to 210 max. 270 max. 230 max. 170 to 270 max. 225 to 310 max. 2000 pcs. 2000 pcs. 1000 pcs. 500 pcs. 250 pcs. Packaging Quantity Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2014 - EEE-177 - Aluminum Electrolytic Capacitors Lead Forming Type (Snap-in) Lead formed Aluminium Electrolytic Capacitor for self mounting, for rationalization and upgrade of soldering process. H3 H2 P = H1 0d E F 04, 05, 06.3, 08 H1 H2 P = 0d E F 010, 012.5, 016, 018 Direction of bending shape is not specified Dimensions in mm (not to scale) Dia 0D (Unit : mm) H10.5 H2 H3 F0.5 P E max. 0d 5 4.5 2.7 2.5 5.0 1.0 1.0 6.3 4.5 2.7 2.5 5.0 1.0 8 4.5 2.7 2.5 5.0 1.0 10 4.5 2.7 5.0 1.0 1.0 12.5 4.5 2.7 5.0 1.0/0.9 1.0 16 4.5 2.7 7.5 0.9 1.0 18 4.5 2.7 7.5 0.9 1.0 for PWB hole dia. 0 thickness 0.5 0.9 1.6 1.0 0.5 1.0 1.6 1.0 0.6 1.0 1.6 0.6 1.0 1.6 0.6/0.8 1.0 /1.1 1.6 0.8 1.1 1.6 0.8 1.1 1.6 Series KA/KS Dimensions in mm (not to scale) Dia 0D (Unit : mm) for PWB H10.5 H2 H30.3 F0.5 P E max. 0d hole dia. 0 thickness 4 4.5 2.7 1.5 5.0 0.95 1.0 0.45 0.9 1.6 5 4.5 2.7 1.5 5.0 0.95 1.0 0.45 0.9 1.6 6.3 4.5 2.7 1.5 5.0 0.95 1.0 0.45 0.9 1.6 8 4.5 2.7 1.5 5.0 0.95 1.0 0.45 0.9 1.6 Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use. Should a safety concern arise regarding this product, please be sure to contact us immediately. 05 Mar. 2014 - EEE-178 - Discontinued Series (not recommended for new design) Aluminum Electrolytic Capacitors (Radial Lead Type) Discontinued Product Series Part No. Endurance + 85 C 1000 h Standard S Bi-polar SU K KS(03) KG SS Z HF HFS HFE HFG HFQ HFZ KF ESM FA FB NHE MH NH NE NX 3H MG TH MT MS GA EA + 85 C 2000 h + 85 C 2000 h + 85 C 1000 h + 85 C 1000 h +105 C 1000 h + 85 C 2000 h + 85 C 2000 h +105 C 2000 h +105 C 1000 to 2000 h +105 C 2000 h +105 C 2000 to 5000 h +105 C 1000 to 2000 h +105 C 5000 h +105 C 1000 h + 85 C 2000 h +105 C 2000 to 5000 h +105 C 1000 to 2000 h +105 C 2000 h +105 C 1000 h +105 C 2000 h +105 C 5000 to 7000 h +105 C 5000 h +125 C 1000 h + 85 C 2000 h +105 C 1000 h + 85 C 1000 h + 85 C 2000 h +105 C 2000 h +105 C 5000 h Horizontal defection ECEA--W---current correction Rated.W.V. (V) Features S SW S(High voltage) ECEA--S----- ECEA--N----S ECEA--U----ECEA--K----ECEA--KK---ECEA--KG----ECEA--SS--ECEA--Z---ECEA--F---ECEA--FS--ECEA--FE--ECA--FG---ECA--FQ---ECA--FZ---ECA--KF---ECEA--E---M EEUFA-----EEUFB-----ECEA--GE--ECA--MH--ECEA--G---S ECA--TE--ECEA--NX--ECEA--T---EEUMG---ECEA--V---T ECEA--M---T ECEA--M--EEUGA----EEUEA----- Replacement 10 to 50 Bi-polar Standard Standard Height 7 mm Height 5 mm 03x5 Height 7 mm Low profile Low impedance Low impedance Low impedance Low impedance Low impedance Low impedance Low impedance Height 7 mm, Low impedance Low impedance Low impedance Low impedance Longlife Longlife Longlife Longlife Longlife High reliability High ripple Fixed time-interval circuit Time constant circuit Low LC +105C Standard Longlife Capacitance (F) 1 to 100 4 to 100 6.3 to 450 6.3 to 50 4 to 50 6.3 to 50 6.3 to 50 6.3 to 50 10 to 63 6.3 to 63 6.3 to 100 6.3 to 63 6.3 to 63 6.3 to 35 6.3 to 35 10 to 50 6.3 to 63 10 to 50 6.3 to 450 6.3 to 100 6.3 to 100 10 to 63 6.3 to 50 10 to 63 160 to 450 10, 16, 25, 50 6.3 to 50 10 to 50 6.3 to 50 160 to 450 0.1 to 1000 0.1 to 15000 0.1 to 100 0.1 to 22 0.1 to 220 3.3 to 4700 0.1 to 2200 22 to 2200 0.47 to 4700 3.3 to 15000 0.1 to 15000 6.8 to 15000 56 to 5600 1 to 120 0.1 to 220 68 to 15000 0.47 to 10000 0.1 to 15000 0.1 to 22000 0.47 to 4700 0.47 to 3300 0.047 to 2200 1 to 1000 2.2 to 470 1 to 2200 47 to 2200 0.1 to 100 0.1 to 15000 10 to 150 25 3.5 to 10 Series Endurance M + 85 C 2000 h SU-BP M KA + 85 C 2000 h + 85 C 2000 h + 85 C 1000 h Available upon request GA +105 C 1000 h Available upon request FC +105 C 1000 to 5000 h NHG +105 C 1000 to 2000 h EB +105 C 5000 to 10000 h TA +125 C 2000 h Available upon request NHG M NHG EE +105 C 1000 to 2000 h +85 C 2000 h +105 C 1000 to 2000 h +105 C 8000 to 10000 h Horizontal + 85 C 2000 h defection current Not available correction for TV Check Panasonic website for discontinued / revised product series specification. http://panasonic.net/id/ 03 Dec. 2013 - EE8 - MEMO CAUTION AND WARNING 1. The electronic components contained in this catalog a re designed and produced for use in home electric appliances, office eq uipment, info rmation equipment, communications equipment, and other general purpose electronic devices. Before use of any of these components for equipment that requires a high degree of safety, such as medical instruments, aeros pace equipment, disaster-prevention equipment, security equipment, vehicles (automobile, train, vessel), please be sure to contact our sales representative. 2. Wh en ap p lyin g o n e o f t h ese co m p o n en t s f o r eq u ip m en t req u irin g a h ig h d eg ree o f saf et y, n o m at t er w h at so r t o f ap p licat io n itm ig h t b e, b e su re t o in st all a p ro t ect ive circuit or redundancy arrangement to enhance the safety of your equipment. In addition, please carry out the safety test on your own responsibility. 3. Wh en u sin g o u r p ro d u ct s, n o m at t er w h at so r t o f eq u ip m en t t h ey m ig h t b e u sed f o r, b e su re t o m ake a w rit t en ag reem en t o n t h esp ecifi cat io n s w it h u s in ad van ce. 4. Technical info rmation contained in this catalog is intended to convey examples of typical pe rformances and/or applications a nd is not intended to make any w arran t y w it h resp ect t o t h e in t ellect u al p ro p er t y rig h t s o r an y o t h er relat ed rig h t s o f o u r co m p an y o r an y t h ird p ar t ies n o r rgan t an y licen se u n d er su ch rig h t s. 5. In order to expo rt product s in thi s catalog, the expor ter may be subj ect to the export license requiremen t und er the Foreign Exchange and Foreign Trade Law of Japan. 6. No ozone-depleting substances (ODSs) under the Montreal Protocol are used in the manufacturing p rocesses of Automotive & Ind ustrial Systems Company, Panasonic Corporation. Please contact Factory The information in this catalog is valid as of July 2014. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: ECE-A1HKS3R3 EEU-FC1J221XB EEU-EB2V100 ECE-A1VKA100B EEU-EB1J101 EEU-EB2D101S EEUEB2W220B EEA-FC1E100 EEU-EB2D101 ECA-1HHG102B EEU-FM1E101 ECE-A1VKS3R3 EEU-FM1V152L EEU-FM1H101 EEU-EB2E330 EEU-EB2G470S EEU-FC1A472L EEU-FM0J102 EEU-FM1H151 EEU-FM1H560 EEU-FM1V561L EEU-FC1V151B ECE-A1CKS470 EEU-FC1A561 EEU-FC1H330H EEU-FM1V331 EEUFM1V102B EEU-FM1V151 EEU-FC1J471B ECA-1EHG470I EEU-EB2V101 EEU-FC1H680B ECA-1HHG4R7I EEU-EB1V330SH ECE-A0JKS470I ECE-A1CKA101B EEU-FC1J220B EEU-EB2G330S ECE-A1HKA4R7I ECA2GHG100 EEU-EB2C221S ECA-1AHG471B ECA-1VHG222B ECA-2GHG3R3 ECE-A1CKS470B EEU-FM1E221B EEU-FC1A471B EEU-FC1J121B EEU-EB1E331B EEU-EB1H470SH EEU-FC1C272B EEU-FM1E102B EEUEB2V680S ECA-1JHG471B EEU-FM1E331 EEA-FC1C560 EEU-FM0J682 EEU-FM1H681L EEU-EB2C470 ECA1JHG100B EEU-FM1C222 EEU-FM1C222B EEU-FM1C392 EEU-FM1E152 ECA-0JHG102B ECA-0JHG102BJ ECA-0JHG103B ECA-0JHG221B ECA-0JHG221I ECA-0JHG222B ECA-0JHG331B ECA-0JHG331I ECA0JHG332B ECA-0JHG471B ECA-0JHG471I ECA-0JHG472B ECA-0JHG682B ECA-1AHG103B ECA-1AHG221B ECA-1AHG221I ECA-1AHG222B ECA-1AHG331B ECA-1AHG331I ECA-1AHG332B ECA-1AHG471BJ ECA1AHG472B ECA-1AHG682B ECA-1CHG101B ECA-1CHG101I ECA-1CHG102B ECA-1CHG221I ECA-1CHG222B ECA-1CHG331B ECA-1CHG331BJ ECA-1CHG470B ECA-1CHG470I ECA-1CHG471BJ ECA-1CHG472B ECA1EHG101B ECA-1EHG101I