
SMA6J5.0A
THRU
SMA6J33A
600 Watt
Transient Voltage
Suppressors
5.0 to 33 Volts
0.05
0.085 ”
0.058 ”
SUGGESTED SOLDER
MAX
MIN
MIN
DIMENSIONS
INCHES MM
DIM MIN MAX MIN MAX NOTE
A .157 .181 4.00 4.60
B .098 .114 2.50 2.90
C .006 .012 0.152 0.305
D..030 .060 0.76 1..52
E .188 .208 4.80 5.28
F .078 .096 2.00 2.44
G .055 .062 1.40 1.60
H .002 .008 0.051 0.203
Features
• For Surface Mount Applications
• Unidirectional And Bidirectional
• High Surge Capability
• High Temp Soldering: 260°C for 10 Seconds At Terminals
• For Bidirectional Devices Add “C” To The Suffix of The Part
Number: i.e.SMA6J9.0CA for 5% Tolerance
0D[LPXP5DWLQJ
• Operating Temperature: -55°C to +175°C
•
Storage Temperature: -55°C to +175°C
•
Typical Thermal Resistance: 33 /W Junction to Ambient
Peak Pulse Current on
10/1000 IPPM See Table 1 Note 2
Peak Pulse Power Dissipation PPPM Min 600 W Note 2, 6
Steady State Power Dissipation PM(AV) 3.0 W Note 5
Peak Forward Surge Current IFSM 70A Note:5
2. Non-repetitive current pulse, per Fig.4 and derated above
TA=25 per Fig.1.
3. Mounted on 5.0mm2
copper pads to each terminal.
4. 8.3ms, single half sine wave duty cycle = 4 pulses per
Minutes maximum.
5. Lead temperature at TL = 75 .
6. Peak pulse power waveform is 10/1000 .
A
D
E
F
G
H
DO-214AC
(SMA)( LEAD FRAME)
omponents
20736 Marilla Street Chatsworth
!"#
$% !"#
MCC
Revision: B 2012/03/22
0HFKDQLFDO'DWD
• Polarity: Indicated by cathode band except bi-directional types
TM
Micro Commercial Components
www.mccsemi.com
1 of 4
• Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
Note: 1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7.
• Epoxy meets UL 94 V-0 flammability rating
• Moisure Sensitivity Level 1